connecting laptop to lcd tv screen

After you connect my lap top to the TV with an hdmi cable, I understand that I am to initiate this action by pressing the Fn button simultaneosly with an F key. Mattered F key use.

Ask the manufacturer of your laptop - this forum is for comments on the Microsoft Answers forums.

writing in the new message: * e-mail address is removed from the privacy... *

After you connect my lap top to the TV with an hdmi cable, I understand that I am to initiate this action by pressing the Fn button simultaneosly with an F key. Mattered F key use.

Mayor Graham - Word MVP
www.gmayor.com
Posted by bridge communities
http://communitybridge.codeplex.com/

Tags: Windows

Similar Questions

  • Portege R500 - toggle the display of the laptop to LCD projector screen

    Hello - new here, urgent request. We have a meeting, and I use the Portege R500 for the first time with LCD projector which is also a Toshiba.

    How do the laptop screen display the projection screen? I thought it was function F5 (Fn + F5), but it does not work.

    Can anyone help?

    Hello

    Yes, you must use the FN + F5 to switch to the external monitor or external projector, etc.
    You must first connect the laptop with a projector, while both devices are turned off.
    After connecting the projector you could power the laptop.

    Then try to switch to external projector using the FN + F5 key combination

  • Satellite L300 - 17L connected to LCD TV - screen is always black

    Hello

    I have a problem with my laptop.
    When I try to connect my laptop to the TV via the VGA doesn't work anymore. It worked great until a few days before, when I try to connect via VGA and my LCD TV screen remains black.
    So I thought that a problem with my video card driver, so I reinstalled Windows :)),: P, but the problem still persist.

    So I downloaded the latest driver for the video card, nothing new. I checked the cable, I tried with another VGA cable and same problem. When I connect the LCD TV to another laptop it works, if the VGA cable and TV work.
    And I have observed that when my laptop is connected to the TV, sometimes at an interval of 15 minutes it get signal, but this for less than a second, and then the screen turn black. (Each time when I connect the TV I give FN + F5 to set the main screen)

    Any suggestion, I have no more ideas.
    Excuse my English. : P

    I also think that the VGA connector can be responsible for this.
    This must be tested properly, so I recommend you contact nearest Toshiba authorized maintainer and ask for help.

  • Cannot connect computer laptop acer aspire 5630 screen via a cable vga to tv screen

    Original title: cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

    Cannot connect computer laptop acer aspire 5630 screen via a cable vga to TV screen. Press function key fn + f5 and I tried fn = f4. VGA cable works with another laptop and shows on TV.

    Hello

    1. If it works well before?
    2. Did you of recent changes to the computer before the show?
    3. What happens when you connect the VGA cable to TV to the laptop screen?

    I suggest to refer to the article and perform the steps mentioned there.

     

    How to configure and use multiple monitors in Windows XP:

    http://support.Microsoft.com/kb/307873

     

    Reference:--

    Setting up dual monitor: two screens are better than one

    http://www.Microsoft.com/athome/organization/twomonitors.aspx#fBid=S5itWxIFacJ

     

     

     

  • I WOULD LIKE TO CONNECT MY LAPTOP TO MY FLAT SCREEN TV

    I WOULD LIKE TO CONNECT MY LAPTOP TO MY TV SCREEN DISH, ARE THERE INDIVIDUAL PARAMETERS SHOULD BE FOR THIS?

    I HAVE THE CABLE AND CAN CONNECT, JUST DO NOT KNOW AFTER THAT.

    http://www.Google.com/search?q=connect+Windows+XP+laptop+to+TV&ie=UTF-8

  • How to connect laptop Insperon 1525 to my flat screen TV?

    Original title: help im seriously disappointed on the compatibility of the technology today

    I have an inspiron 1525 computer windows vista laptop and I want to connect to my phillips flatcreen as ive done in the past I have updated my graphics driver and tried to change the resolution settings but nothing I seem to solve the problem ive read everything on the web and none of it helped me tv Wizard does not detect my TV either this is my last resort please help

    Hello

    Read these?

    http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

    http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

    http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  • Satellite L300-135 - unable to look at the projector or LCD TV screen

    Hello

    For months, I was able to view my laptop on lcd tv and my projector screen. I would just plug my cable rgb at the back of the TV or projector and the screen would be immediately shown. Now am unable view the screen of the laptop on each device. I try to toggle Fn + F5 button but this has no effect. I don't have to press Fn + F5 because it displays automatically once the rgb cable has been connected.

    I have intel chipset r965 and have just recently updated the driver from the website of intel but this has not solved the problem. Would appreciate further advice outside the toggling the Fn + F5 key

    Thank you very much.

    > updated the driver from the Intel site
    I'm afraid that's the problem. Toshiba's own drivers tailored for each model laptop with the support of all the features and additional options.

    I'm afraid with this Intel driver it will not work. Back to Toshiba driver.

  • I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

    I closed my laptop (Macbook pro 2012) screen with a day and immediately after 30-40 minutes his does not starts once again.

    Hello Varshil07,

    Thank you for using communities of Apple Support.

    If I understand your message, by updating your Mac you have forced stop, or you have closed the lid, and now it does not start.  To start, I suggest that try you to start in safe mode by following the instructions below.  For later use, it's a good idea to not force the computer to shut down or close the lid while it is up to date, because it can cause problems.

    1. Choose the Apple menu > shut down.

    2. After your Mac stops, wait 10 seconds, then press the power button.

    3. As soon as you hear the startup tone, hold down the SHIFT key.

      You must press the SHIFT key as soon as possible once you hear the startup tone, but not before.

    4. Release the SHIFT key when you see the gray Apple logo and progress indicator.

    To exit safe mode, restart your Mac, but no press during the startup.

    OS X El Capitan: start in safe mode

    Have a good.

  • My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

    My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

    This general situation may be similar to what is mentioned in this sequel to thread of the CSA

    and if the remedy is to use instructions; detailed and I hope they are correct...

    Re: Restart fails after installation of El Capitan help!

    Or you can try and see on the repair of the system and then if your disk utility can

    See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

    the Mac system, to see if this solves the problem. There may be more than one cause.

    You could try and boot into OS X Recovery, utilities out there, and other options are available.

    • OS X: on OS X Recovery - Apple Support

    This example uses a special partition on the hard drive of recovery which is not in the

    same disc that the Mac OS X section; However if your hard drive is missing, these other

    items may also be at risk. You must have and maintain backups of your duplicate content

    on the external storage drives closed; In addition, a Time Machine backup helps to restore.

    • Apple OS X and Time Machine tips:

    http://pondini.org/OSX/home.html

    • Tips for OS X - using HD recovery:

    http://pondini.org/OSX/RecoveryHD.html

    {Using the utility disc and other tools can be done from the boot OS X Recovery volume

    Beware of the fact these tools can also delete or reformat your content; wiping.}

    Don't know what to say; you could see visiting an Apple store with genius if

    There is an official store. Usually for best time planning you would contact them for an appointment.

    Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

    a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

    In any case...

    Good luck & happy computing!

  • Satellite Pro L500 - press Fn key blocks the laptop computer to blue screen

    Hi all
    First post so please ask if I did not include all the necessary information.

    I have the Satellite Pro L500-1TX (Win 7 32 bit os) and everything worked fine including the Fn menu drop-down button.

    Now, whenever I press the Fn key, it blocks the laptop to a blue screen. The computer then restarts automatically and that it was an unplanned shutdown offers the usual safe mode option.

    Unfortunately, I do not know when this started as I do not use the fn often hesitate so just do a system restore. I don't know how far back to go. It was several weeks before I associated accidents hit the Fn key.

    Any suggestions as to which Toshiba drivers may need to be reinstalled. The computer otherwise works fine.

    Cheers in advance
    MTV

    Great! Thanks for this feedback that I also found other threads about Support Flash Card utility and it is the tool command keys FN so read the forum in other threads contributes without doubt! ;)

  • My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available.

    My internet connection laptop keeps dropping out. This utility solves temporarily, saying the default gateway of something is not available. How can I permanently?

    Hello

    1. who is the operating system installed on your computer?

    2. are you using a cable or a wireless Internet connection?

    3. were there any changes or updates made on the computer?

    4. what store did you try?

    Follow the steps mentioned below and check.

    Method 1: I suggest you to return the item and check if it helps.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Method 2:

    You can try resetting WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.

    a. Click Start and in the search box, type cmd.

    b. right click on command prompt, select "Run as Administrator" to open a command prompt.

    c. at the command prompt, type the following commands:

    netsh winsock reset catalog, which resets the WINSOCK entries to the default installation

    netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation

    netsh int ipv6 reset reset.log resets the IPv6 TCP/IP stack by default installation

    d. restart the computer.

    Method 3:

    Reset the default router by pressing the reset for 15 seconds with power button.

    a. turn off the modem, the router and the computer.

    b. connect the modem to the WAN/Internet port on the router.

    c. connect the computer to one of the router's LAN/network ports.

    d. turn on the modem, wait for triggering connect light.

    e. turn on the router, wait two minutes.

    f. start the computer.

    g. when the computer is completely loaded, check if the problem persists.

  • My laptop turns on, but screen remains black.

    My laptop turns on, but screen remains black.  Then it turns off by its self. Please tell me how can I fix?

    Hello

    If when you turn on your laptop on you do not get a splash screen (Dell, Acer, HP Logo, etc.), you have a hardware problem.

    If under warranty, contact the manufacturer of the laptop.

    If it is not under warranty, contact a repair good, local, shop.

    See you soon.

  • computer connect laptop tv turns off the color scheme

    original title: computer connect laptop tv

    When I connect my laptop to a plasma tv via the vga cord input, the color on the TV set is switched off. I have used other vga cables and it hooked up to TVs and it is always. the color is fine on pc and tv until the hook u both together, what should I do to correct this?

    VGA is not the best way to connect them.  If you have an available HDMI connection use.

  • How to connect laptop to plasma display

    I have a laptop of Lenovo, which has VGA and USb ports but not HDMI. My LG plasma 50' has HDMI ports. How to connect my laptop to the TV. I used a cable USB to HDMI, but the TV kept showing no Signal and portable USB port showed peripheral unknown. Help PLZ

    Earlier, I used a HDMI VGA cable but I faced the same problem.

    Hello

    see if that helps you

    http://www.GeekWithLaptop.com/how-to-connect-laptop-to-TV

    http://www.online-tech-tips.com/computer-tips/how-to-connect-your-laptoppccomputer-to-your-TV/

    http://www.ehow.com/how_2377831_use-TV-monitor-laptop.html

  • How to connect laptop to tv

    connect laptop to tv

    Im trying to connect my lap top to my tv, ive done it before, but can't remember how I did last time

    Perhaps the following links would offer a few ideas:

    Perhaps the following links will propose a few ideas:

    How to connect my computer to a TV
    http://hookpctotv.com/

    How to connect your PC to your TV
    http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set

    PC to TV cables and adapters
    http://www.SVIDEO.com/PC2TV.html

Maybe you are looking for

  • Problem of podcast

    My podcast was approved last week and I received a message saying that it would be available at https://itunes.apple.com/us/podcast/the-impact-show/id1113174240 in two days.  It's been 5 days and when I click the link it tells me that it is not avail

  • I can't open Firefox because it crashes at startup even in Mode without failure. How can I fix?

    Here's the Crash ID: bp-fb854508-a42d-4a50-98a6-a30d02130306I've updated to the latest version of Ff V19 is it?I'm on WinXP with antivirus AVG (8.5.455). The two are entirely uptodate.In AVG, I disabled "Link Scanner" and "Resident shield" in case it

  • Satellite Pro P300-156 does not illuminate

    I've had this laptop for 2 years, it was working fine this morning and I pressed the power button to turn on the sleep mode. I went back to the laptop a few hours later to turn it back on and the power light lit for about 2-3 seconds, then came out a

  • Strange problem with ports USB on my Satellite A300-243

    Hello I have the following problem. So far, I have 4 USB ports, and only my USB key and key to my friend works there. All other USB keys (I tried mby 20 different ones) does not work: aks for, pilot research, etc... I spent many hours together in the

  • Trying to shutter AWG out digitizer (CVI)

    I work with an arbitrary wave generator NI PXI-5421 and digitizer PXI-5211. With CVI, I let a waveform with the AWG output 500ms after the scanner is triggered. Is this possible? To set up triggers, I used the following two functions: niFgen_Configur