Connecting laptop wireless card which does not accept the 16-character passphrase for WRT 54 G Linksys

Similar Questions

• TS15g067cl laptop: memory card reader does not recognize the card

  The card reader does not recognize the cards.  It does not have a drive location (example: f drive).   This makes it impossible to veiw the files or photos on any (I tried six different) of my SanDisk SD cards.  I can't find anywhere to downlod corrected card rhe read updates update drivers or BIOS for my system.   I just bought this computer 1 week ago and do not understand why I read in the forums about driver issues of card reader for the last year.  Windows 8.1 has been out for some time.  Why HP would sell these computers without updating the software to make them work as they should?

  Thanks for the info.  Disk management does not show the drive.  The problem was resolved after reloading BIOS, as suggested in another post.

• IPhone does not accept the code to check for text messages

  II phone does not accept the code verification for the transfer of messages text imac

  Maybe these articles will help:

  Get a verification code and connect with authentication to two factors - Apple Support

  If you don't receive your check or reset email - Apple Support

  If this is not the case, can you explain a little more detail what exactly is your problem?  Or see the 'Contact us' at the bottom of the second article.

• Play Google store does not accept the ADF Mobile apps for tablets

  My ADF Mobile app is published on the Google game, but he says that the app is not compatible with the tablets, for the following reasons:

  1. properly target the Android Versions

  I fixed this by going into the properties of the Application > deployment > Android profile > edit > Options Android > change target SDK API level from 9 to 14.

  Note to the ADF Mobile Team: I recommend that you change the default target SDK API level from 9 to a higher level (Google recommends 14 today).

  2. correctly report physical dependencies

  I understand the problem, but I need help to find a good solution.

  The problem is, when ADF Mobile deploys on the package, it creates an AndroidManifest.xml file and since my application uses SMS, it necessarily adds a < permission > element for telephony.  In general, approval will be "implies" that phone is a "requirement of functionality of the material" unless we also add an element of <>uses feature corresponding with android: required = "false".  However, ADF Mobile not set the < uses > function in the AndroidManifest.xml.

  Does anyone know a good solution for this?  (I searched for a way to configure this in ADF Mobile and in the docs, but it found nothing. "And I can't manually change the AndroidManifest.xml because ADF Mobile it creates in the middle of the deployment process).

  3. take advantage of the extra screen available on shelf area

  I have no start troubleshooting this in detail yet, but I'm curious to know how the Google game store, determines exactly?

  Anyway, if anyone can help me with #2, I would be grateful.  Thank you!

  Patrick

  Edit: Title changed this message, because I believe it is a more serious current problem.  Will respond with more information soon.

  Hi, Patrick, recently Google game made a number of changes, so it is much stricter in terms of supported Android.  Successfully, we applied workarounds and found the combination that seems to work for Google play.  Here are the details based on your questions:

  (1) the level of the API should not matter as long as it's 9 or above - 9 is the current default value.  Nothing specific in ADF Mobile that requires the level more high API.  However, if you are interested you should limit your application to 4.x devices, you can set the minimum and target API level accordingly to assert that.

  (2) by default, ADF Mobile says all the permissions of the device which may potentially be required by the framework.  This is why, for example, even if the application accesses a camera, the AndroidManifest.xml file will still contain references to the permissions of the camera.  Possibility to choose the correct hardware permissions selectively is planned for the next version of Mobile of the ADF.  In the meantime, you can change the AndroidManifest.xml file template in an extension of the ADF Mobile as the workaround.

  (3) Google game uses the element of "Supports the screen" in the file AndroidManifest.xml to determine what factors shape/devices are supported.  Summary of form factors supported and densities are described here: supporting multiple screens | Android developers.  ADF Mobile supports the display of different density already.  In what concerns the size of the screen, you must add the element "supports the screen" in the model of manifest file xml for the size of the screen that you want to support.  For example, if you want to add in support of all devices:

  Android: normalScreens = 'true '.

  Android: largeScreens = "true".

  Android: xlargeScreens = "true" / >

  The Android site would give you definitions of what mean these sizes.

  Finally, here are the instructions on changing the template AndroidManifest.xml:

  -Access file /JDeveloper/JDev/Extensions/oracle.adf.mobile/Android/Oracle_ADFmf_Framework.zip

  -Make a backup copy of the zip file

  -Unzip the file, which would be to extract all files in a directory of 'framework '.

  -Navigate to the framework/template/AndroidManifest.template.xml file

  -Use a text editor to change the permissions of the device, as well as the addition of the screen element supports as indicated above.

  -Zip up the framework directory and name the file zip as Oracle_ADFmf_Framework.zip, replacing the old.  Please make sure that the zip file has the same directory structure exactly as before.

  -In JDeveloper, before you deploy the application, please do a "Clean All" to clean up all the old objects deployment.

  -Deploy the application - the application should now be visible for tablets, as well as with adequate permissions.

  -Download the application on Google game - no further action is necessary in the game of Google around form factors supported and the permissions of the device.

  Now the Android deployment process does not additional validation for the device permissions are actually necessary, therefore, to ensure that these are properly defined.

  I'll also cross post this on the blog of the ADF Mobile team.

  Thank you

  Joe Huang

• Connection problem diagnosis - "the remote device or resource does not accept the connection detected.

  My computer is a Windows Vista Home Premium 32-bit. The problem occurred about 2 months ago, while he was still in Vista, but please note that I've upgraded to Windows 7 last night and the problem is always the same.

  My Internet Explorer, updates to the computer, iTunes and everything, EXCEPT my AOL, does not work. My connection says 'excellent '. (Hang everything on my laptop to my wireless are works fine, that my office is having this problem)
  When I click on Internet Explorer, it says "Internet Explorer cannot display the webpage", and when I click on "analyze the connection problem" said "problems discovered - the remote device or resource does not accept the connection detected.
  I talked to my internet provider Comcast all morning this problem: she said that his side internet connections work properly. She walked through me steps including reconnected the router cords, control the way in which the Internet is put in place and other things, but everything was how it was supposed to be. She suggested that maybe AOL could be the problem and to remove it because I used it, so I did, but nothing has changed. So then she told me to contact Windows... (not sure how to call technical Windows supports without having to pay $59?, but found this forum)
  Is anyone familiar with this problem and could you please help or at least point me in the right direction?
  In addition, please let me know if you need any other information on the problem.
  Thank you
  Lily

  Hello

  Try the steps from the following link

  http://support.Microsoft.com/default.aspx/KB/956196

• The remote device or resource does not accept the connection

  I have a desktop computer Windows 7 connected to my router via an ethernet cable, but when I try to go to a website on Google Chrome as Google.ca, loading the page forever without even showing the page. Finally after a long wait, it finally says that the Web page is not available. I tried to go to the Web sites by using Internet Explorer, but occurs the same result. I tried to troubleshoot the problem and it "the remote device or resource does not accept the connection" is detected, but does not set automatically. I have a wireless printer connected to my router which is online and works very well. I can even connect to my router page. But still no access to Web pages don't like my outlook.com and etc. Sometimes a go open the network and sharing Center to change the settings of the card and disable the wired ethernet only to activate it again. It works only a few times, and it's really frustrating, because it is the only computer that does not connect to the internet, even with a ethernet cable. Please find a solution as soon as possible. Thank you.

  Hello Kyle,.

  Your computer is connected to a domain network?

  If your computer is connected to a domain network, then, I suggest you follow the link below to post your query in the TechNet forums, because they have more expertise on this issue.

  Forums TechNet for Windows 7
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Otherwise, try to follow the following suggestions to solve the problem.

  "Internet Explorer cannot display the webpage" error

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.

  Also refer to:

  The remote device or resource does not accept the connection

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Remote device does not accept the connection since W7 re - install.

  Since then reinstall it W7 Pro, I'm now no longer able to map a network drive on a NAS on the network. The NAS device is visible to all other domestic uses (Sonos, Internet TV, etc) and can be accessed via the front view in a web browser without any problem. I can PING the device and don't get a response, so no problems with the device itself (which was untouched before, during or after re-setup of W7).

  Just cannot map a network drive!

  Tried to disable the firewall etc, but still no luck. Also checked that all relevant services are running.

  Someone has ideas that more I can do to get my laptop to talk to it as a network drive?

  When I enter the ip address of the NAS and click 'Finish' to the card, I get the following dialogue:

  The remote device or resource does not accept the connection
  The device or resource to 192.168.x.xxx is not configured to accept connections on port 'file sharing and printers (SMB).

  any help would be greatly appreciated.
  Thanks in advance.

  Hi Stuart,

  The question you posted would be better suited to the TechNet community. See the link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• IE9 "the remote device or resource does not accept the connection.

  IE9, "the remote device or resource does not accept the connection" appears when you try to open any website. My office to tell me that it is connected but cannot access any www. Meanwhile, my laptop connects fine. I have reset the settings in the internet options does not. I downloaded 'team' to connect (or similar) and asked for a connection and I thought that suspicious so uninstall this program... leaving me without access to the internet... * sigh * please can someone help me?

  Hello

  
  Method 1:
   
  Step 1:
   
  Run the network troubleshooter and see if that diagnoses the problem.
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
   
  Step 2:
   
  Reference:
   
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
   
  See also:
  How can I troubleshoot network card?
  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems
   
  Method 2:
   
  Temporarily disable antivirus programs and firewalls.

  Disable the anti-virus software

  
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-Firewall

  http://Windows.Microsoft.com/en-us/Windows7/firewall-frequently-asked-questions

  Note: make sure that you enable the antivirus software, other security and firewall after the test programs.

  Warning:
  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   
  Display the results.

• I can't update to of things - like iTunes, flashplayer or any error games resource or the remote device does not accept the connection

  Hi as I said in the title, whenever I have troubleshoot my connection says the remote device or resource does not accept the connection. I have a race a portable CAREB on windows 7. I can internet eyebrows and watch videos online and things like that, but I can't update things like iTunes, flashplayer or any what games that I run on my laptop. everytime I try I get a message of program control connection what ever I am updating. I checked the other computers in my house and they are all very well, as well as in home game consoles have no problem connecting to the internet and update. someone help me please

  Original title: Troubleshooting my my wireless conecction and it say the remote device or resource does not accept the connection

  Hello

  Thanks for posting in the Microsoft Community. This problem can occur because of incorrect settings of Internet Explorer. Initially, make sure you have Internet Explorer as web browser by default on the computer, refer to this link: http://windows.microsoft.com/en-us/windows/change-default-programs#1TC=windows-7

  Research I found that this problem can be solved by resetting the Internet Explorer settings. Try the following steps:

  1. Press the logo Windows + R to open the Run dialog box.

  2. Type inetcpl.cpl in the Run dialog box, press enter.

  3. Now click on the Advanced tab , and then click reset.

  4. Click apply , then ok.

   

  Note: Resetting Internet Explorer settings is not reversible. After a reset, all previous settings are lost and cannot be recovered.

  Please refer to this same thread http://answers.microsoft.com/en-us/windows/forum/windows_7-networking/connection-problem-troubleshooting-the-remote/24bfdbf3-4914-45a8-ae45-38243b59be1c?page=1, he is older but he helped a lot of users.

  Let us know the status of the issue. If you need help, please after return. We will be happy to help you.

• BlackBerry BB Z30 Z30 connects to non-existent WiFi signal and does not accept the real

  I just changed wifi of our House 'Superfast' (100 Mb/s) because of problems with access around the House. I changed to 2G and the names of the signals of 5G from those used previously, xxx - 2 G and 5 G - xxx to xxx2 - 2 and xxx2 - 5G.

  However Z30, by listing the networks begins with

  Connected to xxx - 2 G, showing three bars and saying "Login to connect to the Internet." but I can not because it does not accept the password.

  Z30 then begins the list of available networks

  XXX2 - 5G, showing the four bars

  XXX2 - 2G, also four bars, saying "saved".

  at the bottom of the list is

  XXX - 2 G, three bars and saying: "selected."

  How do I remove a network as xxx - 2 G which doesn't exist or doesn't want to, because it blocks the ability to connect to one that exists and IS being sought?

  I can connect to xxx2 - 2G (new 'Saved' network), but after a while (maybe 10 minutes) the phone slides into the ghost...

  I would of course prefer actually to connect to xxx2 - 5 G - but this is not spared: whenever I have it try, ater entered the password (and getting a tick) I said - ' unable to add profile: another profile uses this SSID.» (WPS does not anyway I tried). Later: after having tried this ten or more times, sometimes xxx2 - 5G lists as saved (but usually does not), but is still inaccessible.

  How can I get Z30 to save a network / signal / profile - and use - it says is available and is looking?

  I'm an old man without a lot of hair left - and I'm pulling that very quickly...

  Cheers - Eric

  Eric, open your settings > Wifi.
  At the bottom of this screen type saved.
  Search for unwanted sources wifi saved old and press on & hold on this name to remove the pop up right.

• the remote device or resource does not accept the connection - CIMC

  Hello

  I tried access MMIC remotely via web browser, but get the error message "the connection was refused by the target device.

  I was able to access a device similar to the same place but will not be for this particular device.

  Another diagnosis with internet explore came with reason "the remote device or resource does not accept the connection.

  Any idea please?

  Thank you

  Hi Mike,.

  Is the host this time online? Are you able to ping the server MMIC? If you are able to ping the server of CIMC, but unable to connect via SSH or the graphical user interface you can hit the following bug;

  https://BST.cloudapps.Cisco.com/bugsearch/bug/CSCun88303/?reffering_site...

  I hope this helps. Please check all the useful answers as correct while others can find answers faster.

  Qiese Sa'di

• I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password.

  Default password Machine virtual XP Mode

  I've set up the virtual machine in win 7 Ultimate and put some data. Now when I try to connect it asks password and does not accept any password. Please giveme the default password

  If you're talking about XP Mode the default password is XPMUser.  In general you can not use Windows without a password in Windows Virtual PC that you can with Virtual PC 2007 and before.  XPMUser is used only with the XP Mode virtual machine.  All other virtual machines requires a user created password.  If you have changed the password in XP Mode and forgotten, then you have to start over.

  Windows Virtual PC is based on virtual server rather than VPC and all virtual machines need a password.  If necessary, uninstall the integration features, start the virtual machine and create a password for the admin user.  Restart the virtual machine, and then reinstall the integration features.  You will not be able to access a virtual machine created by the user that has no password, while the integration features are installed.  Once you have everything right, that a virtual machine will not be asked a password if you are the admin user in Windows 7.

  @george1009,.

  Everything got?  :)

• Error: This page cannot be displayed - the remote device and does not accept the connection. (! found)

  * Original title: this page cannot be display the remote or unit does not accept the connection. (! found)

  My internet connection works very well, I'm trying to access a page of my gate of the school we use to complete missions. I can access my web page of schools, I can access my e-mail from the school, but I can't get the e-portfolio page. It says cannot display this page - the remote device and does not accept the connection - (! found). He said to ensure that the TSL and SSL in the advanced internet options security part turned on who they are, my better protected as well the mode. I've never had a problem accessing this page before. It is only this page! Help!

  Hello Teresa,.

  The probable cause of this problem could be due to wrong settings for internet explore.

  Please see the link below, Windows 8, follow the steps to check the Proxy and DNS settings
  http://support.Microsoft.com/kb/956196/en-us

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Hope this helps, please answer with the results for assistance.

• try reinstalling AE CS6... ask the serial number which I then ask for cs5.5 which I did not... I have version 5, but does not accept the number. ?

  Try reinstalling AE CS6... ask the serial number which I then ask for cs5.5 which I did not... I have version 5, but does not accept the serial number.

  There should be a drop down menu where you can select the version that qualifies you for the upgrade activation (CS5 in your case).

• After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK.

  After installed LR6, I firstly the Programm. Its audit of my ID. But then the program does not accept the button: Seriennummer prufen with a new window: no internet connection. But the connection is OK. So I can't start the program.

  Hello Siegmud,

  Wende Dich wie oben und some showers a cat den, denn

  Problembehebung für die Aktivierung und Deaktivierung > Stellen Sie sicher, dass eine zum includes Internet connection > werden (auch) displaying Fehler, wenn Ihr Computer nicht mit dem Internet ist clear (breast kann, dass) oder wenn er nicht vom Aktivierungsserver erkannt wird. Wenn are sich um einen Fehler im accordingly mit dem Aktivierungsserver all, set Sie sich mit each in connection. Halten Sie your Seriennummer bzw. Adobe-ID bereit.

  Hans-Günter