connecting macbook pro (A1278) to TV via hdmi cable

Similar Questions

• How to connect two computers via HDMI cable?

  Hello

  I need to connect my computer by another via HDMI cable to share files.

  1. are there available for this software?

  2. can I connect a Windows PC with Macbook via HDMI?

  HDMI for the video output, not to transfer files...

  See here for transfer files between a PC and a Mac.

  http://support.Apple.com/en-us/HT1408

• Connect XPS 17 LCD TV via HDMI cable

  I have a XPS 17 L701X- and I'm trying to connect it via HDMI cable for a 32 '' LCD TV Phillips girlfriend with backlight. However, no matter what I try, the laptop never acknowledges that the TV is there and vice versa. I tried to restart, reinstall the video drivers, fiddling with settings in the control panel for multiple screens, tried two new HDMI cables separated from Amazon - and nothing works. (The TV works fine when it connects its Macbook via HDMI). Can someone please help?

  Well Mitch, I advanced and bought this adapter part and, lo and behold, the work of workaround! First try also (at least in my case)-without debugging or diagnose.

  Process, my three steps:

  (1) I plugged the adapter Mini DisplayPort for my XPS (around the back next to the HDMI port); (2) I connected the HDMI cable to the adapter (the other end of the cable is already connected HDTV); (3) I have pressing F1 on my XPS and duplicate selected (key Windows + P or "Connect to a projector" If you work via Control Panel).

  (I used StarTech Mini DisplayPort HDMI adapter)

  -site of the factory that it lists as $22, but I bought mine from a local store of tech for less than half that price. I hope this helps!

• HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI

  HP TouchSmart 600-1265qd does not connect to Samsung LED 55 '' TV via HDMI. I have connected the same cable to your laptop and it connects, suggesting that there is a problem with the CV. The TouchSmart has a GeForce GT230 graphics controlled by the control panel NVIDIAnView. By using the system control panel and the control panel NVIDIAnView, I have not been able to locate the Samsung monitor.

  I made restarts it etc. also without success. Does anyone have a suggestion that I could follow.

  Hello

  It is a machine CTO, but have many models of the Touchsmart 600 HIMI IN port series, not OUT port so you can't connect to a TV using HDMI in order to get the picture on the TV.

  

  Kind regards.

• Can I damage my graphics card by connecting my laptop to my tv via hdmi.

  Hi, I was shopping at Best Buy and I heard someone saying that I could damage my graphics card by connecting my pc to my TV via HDMI. This is a not seem OK for me but thought I would check doube. I have a dv6-3225dx Pavilion Entertainment PC. I have windows 7 64 bit. Thank you very much

  Hello:

  I've never heard of such a claim.

  People connect external monitors and TV on their laptops all the time, that's why they are equipped with video/HDMI ports.

  Probably, there is a higher risk of damage/overheating to the graphics card for games graphics intensive video then they streaming video to an external monitor/TV.

  I would not be concerned.

  Paul

• Pavilion TS 14: Projection TV via HDMI cable

  Bought the laptop in 2013, found I couldn't connect the laptop to TV via HDMI cable, the HP support team fixed by using remote access to my laptop. I recently installed and uninstalled Windows 10 and have found that I have the original problem of not being able to connect to my TV again.

  No one knows what to do to fix it. I have prints of what HP has done to fix previously, but it did not work.

  Any suggestions?

  Hi Sparkles1,

  I just tried to log in again and luckily it works now. I am very happy and relieved that this problem is corrected himself, as I did nothing.

  Thank you for your help.

  @claudsmum

• How to play cd/dvd on HD TV via hdmi cable with windows media center?

  How to play cd/dvd on HD TV via hdmi cable with windows media center?

  Hello

  1 connect the computer to HDTV, and you are able to view the desktop on HD TV?

  And also what you play on desktop would appear on HDTV.

  Please follow the links below:

  Play a CD or DVD in Windows Media Center

  http://Windows.Microsoft.com/en-us/Windows-Vista/play-a-CD-or-DVD-in-Windows-Media-Center

  HDTV: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  Connect your computer to a TV http://windows.microsoft.com/en-US/windows-vista/Connect-your-computer-to-a-TV

• How to connect MacBook Pro 2011 to TV HDMI

  I want to connect my MacBook Pro 2011 to a HDMI TV.  I have the presentation PowerPoint, music and movies.  Thank you.

  All you need is love at first sight for an HDMI cable.

• Problems connecting MacBook Pro to the television screen.

  I'm trying to connect my MacBook Pro (retina, 15 inches, end 2013) to an external TV monitor (KONKA). I bought the cord VGA and HDMI adapter. When I connect to the monitor, he doesn't always says "no signal". The screen of my MacBook, but flashes black, then normal, then black, then normal...

  What is output on the Mac?

  Which input on the TV?

  What adopting / specific adoptive parents?

  Maybe a bad adopter.

  What entry TV and cable work on another computer?

  This is the Office Mac Pro forum. I asked that your post moved to the forum of laptop MacBook Pro or another appropriate forum.

• Connect MacBook Pro mid-2009, television

  I'm trying to connect my MacBook Pro mid-2009 on TV

  I have a S a midi DisplayPort and hdmi cable, but still it will transfer to television. Maybe my mini dusplayport is corrupted?

  What is a "S a midi DisplayPort and hdmi cord?

  If it is a mini displayport > HDMI adopter plugged the TV HDMI port then makes the adoptive parent and the work of the TV when connected to another device/computer?

  You select the right input on your TV?

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  Subject of memory NVRAM and PRAM

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

• MacBook Pro A1278 starts with black or white screen

  Please help, my 13 "Macbook Pro, circa 2011 displays a white screen briefly and make sound boots, then goes to a white screen.  I tried to reset the PRAM a couple of times, no luck, reset SMC strikes did not help.

  Can anyone offer additional troubleshooting steps?

  Thank you.

  Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

  To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

  Step 1

  The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

  There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

  a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this support articleto the title of the "Instructions for the backup on an external hard drive via disk utility". The article refers to the start of a DVD, but the recovery mode procedure is the same. You don't need a DVD if you use OS X 10.7 or higher.

  (b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

  c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

  d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

  Step 2

  If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

  Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

  The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

  If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

  If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

  If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

  Step 3

  If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

  Step 4

  Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

  Step 5

  If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

  Step 6

  Sometimes, a startup failure can be solved by resetting the NVRAM.

  Step 7

  If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

  Step 8

  Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

  Step 9

  Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

  It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

  Step 10

  If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

  Step 11

  Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

  Step 12

  Do as in step 11, but this time clear the disk utility boot volume before installing. The system should restart automatically in the installation wizard. Follow the prompts to transfer data from one Time Machine or another backup.

  Step 13

  This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

  Step 14

  If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

• Cannot connect by Satellite P750 to TV via HDMI

  Hello

  I am trying to connect a Satellite P750 with Windows 7 to a TV via HDMI and have had no success.

  I tried without success to the following:
  1. I chose F5 function to extend the desktop with desktop + HDMI, but also just HDMI only
  2. I tried the windows P for the use of projector function
  3. I tried different TV including Panasonic and Sony Bravia
  4. I tried another HDMI cable, I use my Xbox with
  5. in the devices section, I can see the TV is added and tried to change the settings, without success
  6. when I looked online for a solution, a solution was to download HMDI Control manager.
  7. After installing it and when I tried to use it, I got the pop-up message "using the HDMI control, you must activate it.

  So I was wondering if the HDMI port is not properly enabled. According to me, he works one way or another, otherwise the computer would not be able to detect the TV when connected.

  Can you please offer any assistance?

  > 1. I chose the F5 function to extend the desktop with desktop + HDMI, but also just HDMI only

  And what exactly happens if you press Fn + F5?
  You see the Toshiba Flash Cards appearing at the top of the screen menu while pressing FN + F5?

  Please note that the output screen must be changed before you start to play a video.

  Right channel/HDMI port is chosen in the settings of your TV?

• Laptop computer connection TV via HDMI cable... no image. ?

  I'm trying to connect my laptop (Dell Inspiron 1525) to my TV via a HDMI cable.  Everything I read says with 2 HDMI devices enabled all what you need to do is to connect the two... but I'm going to diffuluty.  He continues to tell me that there is no signal, but both devices are connected.

  Any help is greatly appreciated!

  Hi Ashley... B,

  Thank you for visiting Microsoft Answers.

  Which version of Windows Vista is installed on your computer?

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.
  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.
  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "
  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.
  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.
   
  Link to view:
  What should I know before adding TV tuners to use with Windows Media Center?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center
   
  Hope the helps of information. Please post back and we do know.
  Kind regards
  Joel S

• Unable to connect laptop to TV via HDMI cable

  Original title: unable to connect

  I recently put HP G-62 - b51SE.I tried to connect to my HDMI TV using the HDMI cable but nothing works. Is there a way I can connect. What settings should I do in order to make the display appear on television. I have windows 7 ultimate.

  Hi Lovemicrosoft,

  1. first you need a video cable to make the physical connection. For a better image quality, you must connect to the computer to the TV using standard VGA ports or via DVI to HDMI cable provided your TV supports these ports.

  2. open the "display settings" in your Vista computer and activate the output to the TV screen. You can reflect the content of your computer on the TV or extend the display as a double screen control.

  3. pick up your TV remote and switch to "External inputs" in the menu. You need to change the value by default "Video 1" to a different selection which may be "HDMI 1" or "video 2" depending on how you made the connection. "

  Important: Make sure you connect the cable to the TV before turning on the computer, because sometimes it may not recognize the external display.

  You may also change the resolution of your TV screen using the display settings in your panel of control remains the image may appear distorted.

  Link to view:

  What should I know before adding TV tuners to use with Windows Media Center?

  http://Windows.Microsoft.com/en-us/Windows7/what-should-I-know-before-adding-TV-tuners-to-use-with-Windows-Media-Center

• Latitude E6440 display blink when connect you to an external monitor via hdmi to VGA Converter

  Hi Dell Community,

  Please help me diagnose what's wrong with my new laptop.

  My laptop is Dell Latitude E6440, but whenever I connect external monitor to my laptop HDMI via HDMI port to the converter VGA, the external monitor still flashes randomly every two seconds. This VGA HDMI converter / works fine when I used it on the other laptop.

  Currently I still have the chance to try my laptop HDMI port to connect directly to a HDMI monitor because I don't.

  Is it that someone has the same problem with me? Thanks for your help.

  Dell currently manufactures replacements of main card to resolve this problem. They will be available at the end of July. Please make sure you have a current subscription and contact support to be eligible for replacement.