Connecting the highway to CM unified using TLS

Hi all

I have a question for encrypted internal/external calls.

I have some problems with the configuration for the Protocol TLS encrypted calling between 11.5 CUCM and highway-C
Especially in the case of certificate:-Iam using the xCA Oppensource tool.

-> using a generate CA tool to do this & then download the PEM CUCM & highways C also good E and the identification is carried out from CA (Xca tool).

as a result, I have this error "the supplied file is not use server attribute". on Highway-C

All realized help will be highly appreciated and would be accepted from the depths of the heart!

Sincerely

Aron Thunevin

Your certificate does not have the improved use of the key right, are you aware of the document creating a certificate for VCS/EXP? It covers all requirements.

Tags: Cisco Support

Similar Questions

  • Cannot connect the Blackberry curve 8330 mobile using cable and Bluetooth

    Original title: I tried to connect my mobile curve8330blkberry with a cable and the pc does not recognizes it, tried via bluetooth and the same. Everyone pls.helptried to connect

    tried o my blkberry curve 8330 with a cable and Bluetooth

    Hello

    ·         What operating system do you use?

    ·         Are you able to connect other devices to your computer without any problem?

    ·         Did you try to connect the device to the other computer and check if it works?

    Method 1:

    Try running the fixit from the link give below and check if this can help:

    Hardware devices not detected or does not
    http://support.Microsoft.com/GP/hardware_device_problems

    Method 2:

    I suggest you to contact the Blackberry Support for better assistance and check if it helps.

    http://us.BlackBerry.com/support/devices/blackberrycurve8300.jsp

  • Connect the NAS (iSCSI) to vSphere using the crossover Ethernet cable

    Hello

    I have a HP Proliant DL360 G5 in a data center (housing) directly connected to the internet. To save all the VM I would fix a NAS (QNAP with iSCSI) on the server. But given that the server is connected only to a 100 Mbps switch (supplier provide only 100 Mbit) I am looking for a direct solution to enjoy better performance.

    I use on my Proliant Server internal dual port NIC (VMNIC0 and VMNIC1) and an additional port of double NC360T NIC (VMNIC2 and VMNIC3). I made two switches, with VMNIC0 and VMNIC2 vSwitch0 and vSwitch1 with VMNIC1 and VMNIC3 for redundancy. Each vSwitch has its own service with the public IP console.

    Because I would like to continue using the above configuration, it came into my mind to buy an additional network (NC110T with 1 NIC) of the card and use a crossover cable directly to QNAP NAS. The NAS has two NIC, we'll be fixed as said to the ESX and directly to the internet (to manage from outside).

    But now I don't know how to configure it. What should I do that the ESX will intervene to the NAS, and what type of IP address I need to adjust on the NAS to talk to the ESX?

    What I have to configure a vSwitch2 (with physical adapter NC110T) and a new Console of Service with a private IP address: for example. 192.168.1.1 and the card NETWORK NAS Port that connects to the ESX, I put 192.168.1.2 and then it should be possible to work with ISCSI? I can then add the storage in vSphere?

    I would really appreciate if someone understands perfectly how such things can give me an advice!

    Thank you very much

    Best regards

    Phil

    It sounds like a good plan and you have the process down to the right.

    • After the installation of the new card as you did for the first configuration, you should see additional network cards.

      • You create a new vSwitch for the internal network segment that connects the NAS and ESX you note and add these network adapters

      • Then you create the port console and IP address on the private network

    • Now both devices may be

    • In QNAP, you create your iSCSI target or your NFS volume

    • For iSCSI you go to storage adapters - properties - add the ip address of the NAS and then close and discover

      • This should find the paths of the target.

      • Then you go into storage and add and format the iSCSI volume

    • For NFS, you go straight to the storage and add the name address and NAS volume and turn up the volume of storage

    All storage will be visible and usable by ESX.

    Steve Puluka

    JNCIA-ER

    JNCIA-EX

    Senior network administrator

    Liberty Dialysis

    http://puluka.com/home

  • HP Deskjet 1510 all in one - all I have to do before I connect the power?

    I just got the HP Deskjet 1510 all in one.  Is there something I need to do before you connect the power?  In the past with certain printers, which was a problem - some things you had to do before connecting the power supply or by using the installation CD. The instructions that came with it are not very clear or complete.

    Hello trainerjim22,

    Welcome to the Forums of HP Support!

    I understand that you are looking for the installation of the new 1510 Deksjet and wonder if the thing needs to be done before connecting the power supply. You do not want to remove any packaging, adhesive tape, etc.

    You would be able to consult this guide to support to ensure you are not missing anything: printer (Hardware) setting.

    I hope this has helped.

  • How to use the authentication of the URI (e-mail) of MRA - different domain through the highway-C

    Hello

    I am not able to connect to the MRA using my E-mail address. How to solve it?

    My account is [email protected] / * / (this is my domain name locally, not resolved on the internet)

    My email (URI) is [email protected] / * /

    If I connect to internet using my ID of combined directory with my external internetresolvabledomain.com, IE [email protected] / * /, then she succeed.

    But if I use my e-mail address, it cannot be authenticated because the highway to remove the domain, and then ask the CUCM for validation.

    Question: How will I know the Expressway-C that this area is an e-mail address (URI) of my iantra123 account?

    And, said the Expressway-C do not delete this domain for authentication?

    Kind regards

    Antra

    OK, on ARM, when he uses NODES to search for the user in your CUCM, it won't work if you use the IADB, if you use e-mail, it will return a not found message, you can see that the EXP - C opens a session.

  • I have phone i6, when I connect the Wi - Fi, it was connected, but in case of auto-lock, when I open the auto lock or if I m not used 2 or 3 minutes more, he will ask the password for Wi - Fi.

    I have phone i6, when I connect the wi - fi, it was connected, but when the automatic locking has occurred or if I'm not used the phone minutes 2 or 3, after that I'll use the phone, once again, it will ask the password for wi - fi.

    What is an i6 iPhone? There are:

    iPhone 6

    iPhone 6 +.

    iPhone 6 s

    iPhone 6s +.

  • I would like to configure Firefox to use the encryption SSL 3.0 and TLS 1.0 - how do I do this?

    I have Firefox 29.0.1 - Mozilla26 - 1.0
    My instructions to fill out a form online for a work environment are the following:
    To configure Firefox

       Select Tools
       Select Options...
       Select the Advanced icon
       Select the Encryption tab
       Under Protocols, select the check boxes for Use SSL 3.0 and Use TLS 1.0
    

    There is no encryption for the Advanced icon tab. How can I update my encryption?

    I have the same problem, but my version is 31.0 this will also work for me?

  • where is (use TLS 1.0) in the new version of firefox?

    Hello dear

    In previous versions of your software as an option (use TLS 1.0) existed, but the new version doesn't have this option.

    How can check this option?

    Please guide.

    Current Firefox no longer have a user interface to disable TLS or SSL3, but you can make the change on the subject: config page.

    SSL3 and TLS 1.0 are enabled by default in the current version of Firefox.

    You can set the preferences of security.tls.version.min and security.tls.version.max to 0 to disable TLS (0 means SSL3)

    You will need to close and restart Firefox after you change these prefs.

    • Security.TLS.version.min = 0
    • Security.TLS.version.max = 0
    0 means SSL 3.0, 1 means TLS 1.0, 2 means TLS 1.1, etc.
    
  • Satellite Pro P100: Can which digital cable I use to connect the stereo

    I just bought a new P100 and think generally that it's great.

    However, if I plug it into my stereo via the headphone to the front of the computer, then it is very noisy. I read somewhere in the manual that this Jack is used also in digital form - weird! Is there a way to transform digital or I'd be better connection on my external (stereo only) DAC. If this option is ideal so what cable should I - nothing about this in the manual or on the Tosh site. I use a stereo plug for cable twin phono right now.

    Any advice from someone who has connected to their own hifi would be appreciated.

    Bill Mac

    Hello

    The headphone jack offers the possibility to S/PDIF which allows to connect the laptop to the hifi on digital channel.
    You need a simple cable S\PDIF. This cable you can get from each computer/laptop.

    Simply visit this dealer and ask for this kind of cable

    By the way: try to disable the option of its virtual when the laptop is connected to the stereo

  • Desktop HP Pavillion Mini: unify dongle that connects the wireless keyboard and mouse on the HP Pavilion Mini Office

    I bought the product online at Amazon.com. I lost the unifying dongle that connects the keyboard and mouse wireless for the mini PC. No knowledge of a store selling the usb dongle online in the USA? Here is the data on the area where the mouse: model number: MG-1451 / 1452-RG, country of origin: China, identification number of the KCC: IPMPC-CRY-HPK-MG-1451 and IPMPC-CRY-HPK-RG-1452. Help, please. Thank you.

    I brought your question to the attention of a team within HP. They are likely to ask for information from you to get your information or product serial number. Please search for a private message from a contact HP identified. Also, remember not to publicly post information and series numbers.
    If you are unfamiliar with works as a private of the Forum messages, this post has instructions.
    http://h30434.www3.HP.com/T5/first-time-here-learn-how-to-post-and-more/how-to-check-your-messages/TD-p/3547355

  • I can't access my hotmail account or book a hotel since the upgrade to 3.6.8. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings for

    I can't access my hotmail account among some other sites since the upgrade to 3.6.8 on my macbook. I get the following message: "the proxy server refuses connections. Firefox is configured to use a proxy server refusing connections. Check the proxy settings to make sure they are correct. Contact your network administrator to make sure that the proxy server is running. "I can not even find the proxy settings more.

    Windows: Tools > Options > advanced > network > settings
    OSX: Firefox > Preferences > advanced > network > settings
    Linux: edition > Preferences > advanced > network > settings
    Set your settings to connect to the 'No proxy', if you are not using a proxy.

    Firefox 3.6.6 added a new preference for connection settings, use proxy Panel"system settings", and the default value is the point. " This new preference does not affect most users, because they probably do not have a proxy set in place in their operating system. Therefore, most users should use the setting "no proxy".

  • Qosmio G30: Can I use component video software plug-in to connect the Gamecube or PS2?

    The Qosmio G30 has a VIDEO-IN bit for the red/white/yellow wires... So I wondered if this meant that I could connect my PS2/Gamecube/similar to television, playing games on my laptop, save me money when I move to College :)

    Indeed, if I pretend that I'll put up a set - top box for the TELEVISION, the Gamecube appears under "Video Composite", I just can't save like a channel or anything at this point...

    Someone help? Would be very grateful...
    Thankee.

    Hello
    The s-video-in port can be used to connect and to import data from the external device such as an analog video camera or VCR. Imported video can be edited or written on a DVD disc.
    Video port can be used to connect the external device such as a game console

    I think you should also consult the user manual because you will find the full description on unique ports and use.

  • Connection by using the stack of Toshiba BT using Service GUID.

    Hello
    I need you connect using the battery of Toshiba BT using Service GUID.
    Can someone help me with this?

    Hello

    Yes, maybe someone can help you if you offer more details about you and your problem:
    -Portable
    -Operating system

    In addition, it would be interesting to know what device you want to connect, and you understand under Service GUID

  • Implementation of two R7000 mode bridge (1 connects them 2 the internet and all devices, use 2!)

    Hello

    I have trouble finding my drives NAS via Wifi.

    Since I moved my NAS drives to the location of my second router and connect the first router to the internet and all my mobile devices and laptops, I have problems connecting to my NAS readers. Sometimes it works, but more often, it's not.

    I've implemented the first router as "router mode" and the second router als 'bridge'

    Can I change the configuration, so that my second router is connected to the NAS drives and also works as my router for mobile devices and laptops? Then the first router just to connect to the internet and transfer it via the bridge on the second router.

    I tried this, but it doesn't seem to work...

    Concerning

    Michael

    Just to close this topic: got the solution works by using a set of powerline Netgear. It provides internet access to my router located posting the TV and works perfectly. Wireless AC is not the answer to everything, I realize ;-)

    Thanks for the discussion.

  • I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

    I have an iPhone 6s smart box, but I am unable to connect the headset because it is not long enough.  Is there any adapter that I can use?

    alias-research-http://www.Amazon.com/s?ie=UTF8&x=0&ref_=nb_sb_ss_i_8_11&y=0&field-keywords=IPhO does % 20headphone % 20adapter & url = % 3Daps & sprefix = 20head % iphone

Maybe you are looking for