Connection 12 '' Macbook to Thunderbolt display does not work (USB - C for HDMI / Lightning)

Similar Questions

• Thunderbolt 10 Windows display does not work

  Hello

  I'm trying to implement the following configuration:

  I have 2 Macs:

  • Mac Mini (late 2014, 2.6 GHz Intel Core i5;) Intel Iris 5100 1536 MB) with Windows 10 (Home) installed through Boot Camp
  • 27 "iMac (late 2013; 3.5 GHz Intel Core i7;) NVIDIA GeForce GTX 780 M 4 GB) installed with OS X El Capitan

  I want to use the iMac as a display for the Mac mini, but it seems that thunderbolt display does not work (I can not upgrade to Windows 10 by pressing Cmd + F2)

  Could you please help to solve this problem?

  Kind regards

  Dmitry

  Please see use of your iMac as a display with the target - Apple Support Display Mode and Thunderbolt Firmware Update 1.2: continues to reappear and ports Thunderbolt and the target Display Mode may not work - Apple Su... .

  If command-F2 does not work

  If your iMac won't go to the target Display Mode when you press Control-F2, check these things:

  • Make sure the iMac that you try to use it as a screen that supports target Display Mode.
  • Make sure you are pressing Control-F2 on the keyboard which is connected to the iMac to use as a screen.
  • In the keyboard system preferences, if the check box is enabled to use all F1, F2, keys etc. as standard features, changes of command-Fn-F2 key combination.
  • Make sure that your Mini DisplayPort or Thunderbolt cable is connected to both computers.
  • If you are currently connected to the iMac, you want to use as a screen, try to connect to return to the login window. Then again press Control-F2.
  • Some old keyboards Apple and third-party keyboards allow may not control-F2 to toggle display modes. In this case, use the keyboard that came with your iMac to activate / deactivate the target Display Mode.
  • If your iMac is currently started in Windows, it will not be in target display mode. Target display mode is not supported in Boot Camp.

• first instance LR 6 cc import goes well with the various cards, that one card does not work, usb HDD with only images, map 9571 photos 115GB, sometimes only 300 photos, then wait all night nothing, try the separate subfolders, only two (including su subfo

  trial LR 6 cc import goes well with different cards, that one card does not work, usb HDD with only images, map 9571 115GB, sometimes only 300 photos pics, then wait all night nothing, try separate subfolders, only two subfoldrs(including subfolder) done well, 175, and 125 peaks, other subfolders doesnot work, opendLR as administrator : no difference. I7 import about 60-70%. on the import of only about 300 visible pictures, the other empty square. solution?

  Hi willemm,

  first instance LR 6 cc import goes well with different cards, that one card does not work.

  Could you please develop the issue you are facing?

  What is the image format you import?

  USB HARD drive with only images, card 9571 115GB, sometimes only 300 photos pics

  I would not recommend to import gb 115 library at once.

  Kind regards

  Assani

• Satellite 1110: Secondary display does not work

  I have a satellite 1110
  Connection of a monitor second - does not work
  The settings are correct in what, move your mouse off the screen of the laptop and he enters the secondary monitor - but this monitor is empty
  Tried all the normal things - control work? Yes etc.
  I'm running XP Professional could be corrupted or is it more likely to do with my laptop

  Please someone help - new monitor for Christmas - just can't make it work

  Thank you

  Hello Nick

  According to your description, you can't write that the second display doesn t work. Of course, you have activated the option called extend my Windows desktop on this monitor. In this case, you can remove all windows laptop for external monitor screen.

  If you work with more different windows on this way, your work will be more comfortable. I assume that you do want this and it will be interesting to know how you want to use the secondary display:
  -secondary display only
  -but both with the same point of view?

  Remove the scope option and use the FN + F5 key combination and choose display to use.

  Good bye

• IdeaPad P400 - display does not work.

  Hello, I have a P400 Ideapad, display is not working properly, it will stay black. But if I move the screen forward or backward, it works again, as if she had a bad connection.

  Especially if I'm pushing on a corner of the laptop, it works perfectly.
  Can you help me please? What can be?
  Thank you in advance!

  Finally I took it for repair, he was be a defective screen, got a new.

• I have a SSIS package that uses ODBC to connect to a progress database that does not work in SQL Agent

  I have a SSIS package that uses ODBC to connect to a Progress database.  It works fine in Visual Studio and it works very well in a batch file calling DTEXEC from the Windows Task Scheduler, but it does not work in the work of the SQL Agent.  It says that it cannot find the driver information.

  Hi Curt_DBA,

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums (SQL Server Integration Services).

  MSDN Forum (SQL Server Integration Services)

  http://social.msdn.Microsoft.com/forums/en-SG/sqlintegrationservices/threads

  I hope this helps.

• Startup and display does not work well.

  When I start Windows XP it takes about 4 minutes to the icons appears.  They appear of normal size and the screen turns white and the size of the icons and programs and the internet are extra-large. I go into display properties and reconfigure and find his game on 8-bit!  After configuration back to normal display and restart or turn on again the same thing happens!

  Also, I tried to do a system restore and it does not work either. Please advise me on what to do. Thank you!

  Hi RhondaHeaven,

  I suspect that your display card drivers are corrupted. You have your cd/dvd drivers? If this is not the case, download your display drivers (you will get the model and make from Device Manager - click on start-> settings-> Control Panel-> system-> hardware-> device-> display adapter Manager).

  Click Start-> settings-> Control Panel-> system-> hardware-> Device Manager-> right click on your display-> Uninstall adapter.

  Uninstall display drivers Intel of add/remove programs.

  Restart your computer. Reinstall the drivers from the cd or downloaded driver.

  I hope this helps.

• Fingerprinting and display does not work after the recovery of the system (Pavilion dv7 4080us)

  Hello.

  This weekend I decided to do a restore of the system on my Pavilion dv7 4080us (LW170UAR), as I have done several times previously, using the built-in HP and the recovery etc. partition manager.

  Operating system is Windows 7 Home Premium 64-bit, and everything worked OK with the new facility, with the exception of two things:

  • I don't see my AMD display driver listed on device listing Manager. Only 'Intel HD Graphics Family' is listed under graphics cards. I tried to download the drivers from the support page, but it doesn't help.
  • The fingerprint reader does not work. I tried to uninstall the drivers and software several times, rebooting and everything else I've seen that suggestions on these forums, with the files found on the support page of my laptop. No luck yet.

  I would appreciate any kind of help. Thank you!

  Excellent!  I am happy that you now have the correct drivers installed.

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• With the clause does not work in SqlPlus for DataBase 11 GR 8 1 material

  I have 11 GR 1 database material, when I connect to my database through SqlPlus (version 8.0.6.0.0) this query

  with x as (select * from areas) select * from x;

  does not work. But when you use SqlPlus provided by 11g, this query works well. This query can run on an older version of SqlPlus?

  user12222356 wrote:
  This client software is installed with Oracle developer 6i form. should I remove all the form developer? Latest version of the form developer is available for 11 GR 1 matter?

  Well, you have problems with the developer of forms?

  I wouldn't recommend delete because you have problems with the SQL more customer that goes with it. I recommend to download the instant client and using them for your needs of sqlplus and leaving the rest products installed on your machine only.

• Graphics ATI catalyst on Acer aspire timeline 3820 tg - does not work on windows 8 (HDMI does not work)

  I have trouble with my ATI catalyst on win 8 HDMI does not work, and I am not able to download/find the right driver

  The Aspire 3820TG don't figure on our page Windows 8 Upgrade offer.

  Therefore, we do not provide drivers of Windows 8 for this system.

  You can try to find the drivers of Windows 8 on AMD Support site.

  http://support.AMD.com/us/pages/AMDSupportHub.aspx

• Thunderbolt display does not office

  My Thunderbolt screen stopped yesterday afternoon while I was working in quickbooks. I bought this screen in January 2016 and has occasionally turns off and on again without reason apparent. This time it just came down. I took these steps and now have a blue screen with no desktop display. When I check displays the System Information the Thunderbolt Display appears. I'm stuck. Can anyone help?

  1 unplugged and reconnected on the screen and all other devices.

  2. restart the computer

  I now have a blue screen and the MenuBar on top display system preferences while my macbook pro screen this Apple community. I checked the preferences system. To my knowledge I have nothing changed since I first put this system in place.

  System was installed January 2016.  Is MacBook Pro retina 15 inch 2015.

  Thunderbolt Display

  El Capitan 10.11.15 last update installed 26/05/2016

  Virtual machine to Parallels Desktop for Windows

  Processor name: Intel C

  Try the MSC and PRAM reset on your MacBook.  Connect the DBT and see what happens.

• The Satellite A200 display does not work

  Hello
  I own a Satellite A200, since yesterday my screen did not work. I hear vista start in the background but theres nothing on the screen when the system is off.

  Please help me...

  Hello

  Go you through the devices different views?
  Using the FN + F5, you can switch to the external monitor or maybe TV you used this key combination accidentally?

  It would be also advisable to connect another external monitor to the laptop to check if anything should be displayed on the monitor

  If you're not going to see anything on the second monitor, then a default display could be possible.

  The A200 is not very old series of laptop I think the warranty to be valid. Therefore, you can contact the ASP in your country for and verification of the laptop.

  Good luck and greetings mate

• Connect you to windows 7 password does not work and no disk password does!

  I had the same password for years.  I've never had a problem.  All of a sudden my password no longer works.  Help!  I have no disk password.  Don't know.  I have no recovery disk.  Do not no more.  I only RESTORE which I want to use.
  Can someone help me please?

  Can you think of anything else I should do to prepare in case something goes wrong with the computer.  I have the recovery CD I created them when I got the laptop.

  Can of course! Those of us who prefer do not re-install Windows from scratch in case something does not take the following measures:

  1. Burn a CD to repair Windows via Control Panel / backup and restore.
  2. Connect an external hard drive in a USB enclosure.
  3. Create an image of the drive system via the control panel / backup and restore. Store it on the external drive.
  4. Use the repair Windows CD to start the machine in Repair Mode.
  5. Check if the image in step 3.
  6. Update the image to twice a year.
  7. Use the USB drive to your regular backups.
  8. Keep the USB drive, far away from your PC for most of the time.

• UserInterface-Guide (PDF), image display does not work

  Dear community,

  I have a problem with the display of images. I use Eclipse Version 3.4.0 with the official Blackberry RIM Plugin. Device Simulator simulates a BlackBerry 8300.

  There is a PDF Document on http://na.blackberry.com/eng/developers/resources/tutorials.jsp called UI A11

  which shows how to set up a small interface, including the 3 images. After you have copied the source code in a new project Eclipse-BB, I have created 3 new images that should serve as a "canada.png", "us.png" and "uk.png" (these are the names of files mentioned in the PDF Doc) and imported into Eclipse. The code compiled without error.

  When I run the program on the Simulator, I can see the labels and buttons, but there is no images.

  I deleted the png of the eclipse project and added 3 jpg: I see no more.

  Can someone tell me what is the problem?

  Sincerely,.

  Patrick

  Put a breakpoint after a lines like:

  _ukImage = Bitmap.getBitmapResource ("uk.png");

  If the Bitmap (in this case _ukImage) is zero, the system could not find the resources file, and then you said it to.  This should be added to the project, if I went in the JDE, it would be in the same directory as the source.  Not sure on Eclipse, I suspect the same.  So, add in the right place, and the bitmap must be found.

  Compiling and running will not fail if it does not find the resource.  However, you will notice a line in the output of debugging, but I'm not sure about this.

  And welcome!