Connection and printer cable

I need cable for printer officejet 4500 G510a series. Can not locate one in any store. They gave me the printer without any accessories.

Also need the instruction manual to connect the printer to the computer - disk drive does not work properly.

Hello Lisa_Veale

First of all, you can find the manual here: Officejet 4500 manual.

You can order are available from the shop online from HP.

Cable USB 9 feet

Cable USB 6 feet

If you need the software because your hard drive does not work you can get them at the link below.

Software Officejet 4500

I hope I've been helpful!

If you have more questions please post back.

Tags: HP Printers

Similar Questions

  • Unable to connect a printer cable wireless PC networking wireless/wired

    We have a HP Officejet 6500 a more printer (E710n-z)

    Wireless router with 4-port ethernet (2864 SAGEMCOM) - some PC to connect wireless and we have 3 connected via ethernet (network has several printers, 2 netbooks, IPad, 2 laptops and 4PCs currently configured - but with 5 active users change frequently)

    Can't connect the printer wireless to personal computers, laptops, etc.--but could not connect cable PC (running version of windows XP-Edition family)

    I would like to avoid forcing the IP address for printer (everything else is automatic) - is there another workaround solution?

    I have another printer connected wireless two wireless and wired PCs

    Installation / troubleshooting software assumes that all or all wireless's cable network

    I don't mind uses the fixed IP address to install it, but prefer not to use for the current connections

    Thanks for your help

    Nancy

    PS - a computer problem with "serscan.sys' file not found - this can, I think, be resolved once I found download * since no longer have windows XP installation disks

    Thanks - once took me to update my file serscan.sys (fix Windows), I was able to put in place an IP address of the printer (not my ideal solution), but it works fine now

    Thanks for the quick response!

  • DeskJet 1050 don't connect and print

    My deskjet 1050 has stopped working on my desktop windows 8.1. It worked yesterday and is a recent purchase. There is no error message. the image of the printer is checked green in devices and it seems that nothing is wrong. When I click on the status, the word 'connect' is grayed out. I have tried disconnecting the power supply, disconnect from the computer, uninstall and reinstall the software, turning computer and new. There is no blinking light, the Green led is on, cartridges are full, usb ports and power outlets are very good. He printed the alignment page when I reinstalled it and it scans and copies. Just could not get the printer to connect to my computer. When I asked the hp detector to detect the device it gave me a message saying something about not being compatible with a tablet. I'm on a desktop, not a Tablet so don't know why it came; I'm totally frustrated because I can't find anything on the support network to help me. would appreciate some advice. :-) Tracy

    Hi mumof3,

    Welcome to the Forums of HP Support! I understand that you are not able to print on your USB connected HP Deskjet 1050, you are running Windows 8.1 and tried a few troubleshooting without success.

    I would like that you start here and run HP print and Scan Doctor- it has been designed to provide users troubleshooting by HP and features fix needed to solve many common problems experienced with HP print and scan the products related to Windows computers.

    Please let me know what the PSDR find, I'll watch for your reply.

    Thank you

  • HP Officejet Pro 8610 and G62: both computer HP laptop and printer do not work not today

    Last night, the printer stopped working and posted message indicating its ' in offline mode. Then this morning, impossible to download the documents on HP G62 online and offline to send. I had changed my Windows 10 OS two months ago, but so far had not experienced any problems. Please help as soon as possible!

    Sincerely,

    Wanda Thompson

    I think that your connection Internet/WiFi connection can be a problem causing your PC to lose internet connectivity and printer to establish a connection with your PC.

    Try to restart your internet modem and see if that helps.

    Its always good contact also your Internet service provided.

  • sharing Windows 7 printer cable on my desktop and connect wirelessly to laptop both running Windows 7

    On my desk, I configure printer sharing, but it cannot add my laptop.

    I can use internet from my laptop using the network but no printer?

    Any help would be really appreciated

    Thank you

    Ray

    Hi Ray,

    We would like to know more about details to help you better.

    (1) what happens when you try to print by using the shared printer from your laptop? You get the error message?

    (2) is the shared printer is detected on your laptop?

    (3) what happens when you try to add the printer to your laptop?

    (4) have you enabled file sharing and printing on your laptop?

    (5) did you share the printer on the network?

    (6) you are able to print from the desktop?

    You can view the steps in the link below and then check if it works.

    Share a printer

     

    http://Windows.Microsoft.com/en-in/Windows7/share-a-printer

    Write us with the details asked so that we can understand the question better to help you.

  • DeskJet 6940: ethernet connection between the new modem and printer does not transmit Mac

    I just installed a new modem to Qwest; It works wirelessly with my iMac 10.11. My old (but functional until yesterday) Deskjet 6940 is connected to the modem via Ethernet. When I try to print, the document seems to be transmitted to the printer, but then it hangs on and I get the message "the printer is not connected" - which it is, plugged, ethernetted, and set in motion. Support of Qwest says that only 10% of the info from the computer are the printer, but he seems to think that the part of the new modem Ethernet is functional,

    I have already tried all unplug/restart/send/add printer new check/updates / IP (cannot connect) / ethernet ports and cables, etc.

    Any other ideas?

    Thank you!

    Hi @newgranny,

    Thanks for getting back to me.

    It is good that the printer has been able to print a diagnostic page.

    Ensure that the router and firewall on the market do not block these ports.

    Ports of printing:

    • UDP ports: 427, 137, 161
    • TCP port: 9100

    Card photo upload:

    • UDP ports: 137, 138, 427
    • TCP port: 139

    The HP device status:

    • UDP port: 161

    Ports of Web Services:

    • UDP and TCP: 80, 443, 5222 and 5223

    Hello Ports:

    • TCP and UDP: 5353 and 5297, 5298

    Unplug the wired network (ethernet cable), restore the default values on the printer.

    Restore the default settings.

    Follow these steps to reset the printer to factory default settings:

    1. check that the printer is on.

    2. press and hold down the button to report Page.

    3 while holding down three times the homepage button, press the Cancel button.

    4. release the report Page button.

    Source

    • Restart the printer.
    • Connect the ethernet cable.
    • What were the results?

    If the problem persists, try the USB connection.

    Please reply to this message with the results. Good luck!

  • C6380 - computer laptop xp prints with connection by usb cable but not wireless

    Hello

    I have a c6380, which is about two weeks old. Setup worked fine when I put it on the wireless network and everything is ok.

    I installed the software on a vista pc which is connected by cable to my router from sky. This shows very well.

    I installed the software on a computer vista laptop that is wireless and prints well.

    I also have a computer laptop xp. It is also wireless. The software installed without problem. See the printer etc. However, when I try and print, the printer makes noise and pulls the paper, then the screen says it's printing and then nothing happens. The printer stays like that and eventually the laptop shows a failure to print the message. The document remains in the print queue before deletion, and I have to press Cancel on the printer. If I plug the printer with a usb cable for this laptopit prints without problem.

    I ping the printer wireless froom the laptop xp and access the admin screen. It also shows as a network drive in my computer.

    I uninstalled the software that came with the printer, downloaded the hp software to ensure that it is up-to-date and re installed.

    I put the printer with a static ip address.

    I restarted the router as well.

    The router uses a channel 11 broadcast key, wpa - psk and is set to g & b modes.

    Now, it's really really frustrating because the computer laptop xp my wife, is the main reason why we bought a wirelsss printer because she is a teacher and done loads of printing.

    I'm pretty good with pc / networks etc but have now run out of ideas.

    Can someone help me please?

    Thanks in advance.

    Steve

    Hello

    I've actually solved myself, but I'll keep this post here anyway.

    The answer has been upgraded from SP2 to SP3.

    Probably should have thought about that a little bit earlier!

  • DeskJet F380: F380 - solution centre message 'Cut' to print but scanner is connected and working.

    My Deskjet F380 worked well but now, I get an error message when you try to print. Scanner is connected and works fine. Solution Centre message appears "Deskjet F300 Series offline!". Convenience store simply said ' turn on the printer!

    Can someone help please! I can't understand that only printing is disabled!

    Hey @AncientPrinter,

    I see that you have some problems with printing from your PC to 10 Windows for Deskjet F380 all-in-one printer. I can help with that.

    Here's what we will do:

    1. If the printer is connected to your PC via a USB cable, remove it.
    2. In your search type in printers bar and open devices and printers.
    3. Right-click on your printer icon listed.
    4. Click on remove the instrument.
    5. Repeat for all other icons printer listed.
    6. If you have removed the USB cable and plug. If not, click Add a printer to add to the queue new print.

    At this point, you should be able to print. If you are unable to do so, the next thing to do would be to start printing and scanning doctor. You can find the Print and Scan Doctor by clicking on this link. It will be either allow you to print, it will provide you with a list of questions, he found. If it finds all he couldn't solve the problems then please let me know what those who are.

    Please let me know if this allows you to print or if you have any other questions. If not, have a great day!

    If this solves your problem, then please help others find this post by clicking on accept as Solution on my post.

    If you appreciate my help, so please let others know by clicking on the icon below my post thumbs up.

  • Connect the USB cable on my 5510e-all-in-one wireless HP Photosmart printer

    Need me 15 minutes to print a page using my network wireless at home. I decided to connect the printer with a USB cable, but the installation of HP - written installation guide - instructions only show the USB wireless method. I already bought a SPEAKER cable so I'm readt to go one time that I get help. My laptop, that I intend to connect is a dp4 Pavilion from HP with Vista. Thank you.

    Hi there billham68 and welcome to the printer HP consumer Forums.

    Here is a link that should help you in the accomplishment of the task at hand.

    Installation of the software of the printer in Windows for a USB cable connection

    http://support.HP.com/us-en/document/c03521864

  • HP ENVY 7640e: can I connect the printer with a USB cable in addition to the Wi - Fi

    I just bought this printer and succeeded in setting up wireless.  Can I now connect it using a USB cable?  If the answer is 'YES', just make the USB connection, i.e. will be 10 Windows automatically adds the printer, or do I have to re - run the setup software and select the USB option?

    I would like to have the possibility of having the two configurations available for me to pick, i.e. be able to select the wireless printer or USB printers.

    Thank you.

    Hello

    The answer is Yes, you can connect USB and wireless. 10 Windows can install a generic driver for you to print but envy 7640 has many features, so you must install drivers to allow you to print and scan locally using USB and printer software.

    You need to connect to wireless internet to be able to use its full functionality.

    Kind regards.

  • The printer cable connections

    I have a printer HP Laserjet 5 p, old but works very well.   It is wired to a cable to plug into the computer.   However, I now have a new computer, with no parallel port and will need to talk to the printer via a USB port.  Is there an adapter available that will allow me to connect the cable wired to my printer on the USB port?   My printer cable's 25-pin male, so I need a 25-pin female plug connected to a USB port.   I believe that a cable (6 ft) M501-1164 is available, but that would mean I'll have 12 feet of cable between my printer and the computer.   will be led to the loss of data?   Will need me new drivers if the computer communicate with the printer via USB and not via the parallel port?

    Thanks for any help.

    Hello

    You need a cable like this:

    http://www.Amazon.com/Belkin-F5U002-parallel-printer-adapter/DP/B00000J1TS

    Kind regards.

  • OfficeJet Pro 8500 - no USB or Ethernet cable to connect the printer to the computer?

    I'm just trying to set up my new printer Officejet Pro 8500 Wireless.  I got to the step of installing the software, but there seems to be no cable supplied to connect the printer to my computer.

    I can't currently connect via radio that I expect a new wireless router be delivered.  Is this the way onlt connection other than buying a separate USB or Ethernet cable?

    Help, please.

    Ethernet and USB cables are not usually provided with most of the printers that you need to choose a cable with a length of favourabel to you. You can go to a hardware/computer store and buy a USB A-to-B cable. I'll post a picture of the end of cable just to clear any confusion.

  • Problems connecting an Officejet 7310, wireless and ethernet cable

    My printer (Officejet 7310) is connected to two PCs with an ethernet cable and the router. Now I want to install a laptop as well.

    I know that the lap top is communicating with the wireless router, but I can't get the laptop to recognize that there is a printer is installed.

    I tried to connect the printer directly (via Ethernet cable) to the laptop and it works fine. I downloaded the latest version of the software for the 7310 and used two options (without wire and cable).

    Any help would be most appreciated.

    Cutting the anti-virus made no difference.

    I HEALED NOW THE PROBLEM!

    Installed a new router 2wire.

    Thanks a lot for your help.

  • connection for printing from a computer wireless with a connection cable to the router usb printer?

    Produst name: HP Officejet Pro L7555.

    Works with Windows 7.

    A new router and the modem was installed when Comcast installed our wireless connection.  This of course did not work with the current setting of the printer.  The printer is connected via USB cable to the router.

    Are you sure it's a USB and not an Ethernet cable?  I bet it's in the affirmative:

    1. disconnect the Ethernet cable.

    2. on the printer: Setup > network > default settings.

    3 reconnect the Ethernet.

    Now, remove the printer in Control Panel > devices & printers, then add it again like this:

    1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.
    2. click on > start > Control Panel > devices & Printers.
    3. click on add a printer
    4. Select local printer
    5. Select create a new port and select Standard TCP/IP Port, and click Next.
    6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
    7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
    If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
    8. If prompted, use the driver that is currently installed.
    9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
    10. we may ask you to share the printer. Choose No.
    11. the printing area of Test Page is displayed. Go ahead and print it out.
    12. click on finish.

  • Desktop computer connected via a cable to a wireless router - can't print on Photosmart Wireless B109n-z

    Hello

    I have my desktop (Windows XP) connected via a cable to a LinkSys WRT54GC wireless router and wireless HP Photosmart B109n-z connected wireless. I can 'see' desktop printer if I write the IP address of the printer in the browser, but printing does not work.

    I don't know how to set up the printer to print from this desktop computer. What I choose when installing printer drivers (printing via USB or wireless?). I tried manually installing printer but without success. Do I have to set up specific ports?

    Printing from laptop (connected wireless to the router) works perfectly.

    Thank you in advance for your answer, I'm really lost on this one.

    Choose print wireless while installing the software.  Because the printer is connected to your router, you don't need to go through «setup USB wireless»

    I'll try to manually add again in this way:

    Verify that you can access the web page internal to the printer by its IP address.

    1. click on the 'Start' button--> printers and fax machines.
    2. under print jobs, click on "add a printer".
    3. click on 'Next' on the Add Printer Wizard window.
    4. Select "local printer attached to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
    5 under, select a Printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
    6. in the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
    7. under "Add Standard TCP/IP Printer Port" enter the IP address of the printer. Click 'Next' and then click 'Finish '.
    8. now select HP in the manufacturers list, select your printer in the list of the models of printers and click the button "next".
    9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
    10. Add the name of print spooler, and then click "next".
    11. click on "next".
    12. click on "Next" and "Finish."

Maybe you are looking for

  • SMU-1065 maps won't initialize restart

    Hello I have a few cards as 6535 and 6561 SMU-1065... All the drivers are installed and I see them in the Software NI MAX. I have this problem, if I opened my computer and the victory has been downloaded, then I turn on my pxi... But the cards are no

  • Ultrabook: problems of motherboard

    My laptop has a problem with the motherboard and the skrin is impossible turn on when the switch is turned on.I have a few questions in your opinion, 1. what should I do with my problem? Either buy another laptop, simply change the motherboard or jus

  • When I try to access windows live mail I get the message that the grille is corrupt and 0x8000FFF error message

    I've been using Windows live mail for some time and now when I try to open it I get a message that my calendar is corrupt and it does not open Also appears a 0x8000FFF error? How can I fix? Thank you

  • Click on the events in Adobe animate CC

    Dear friends,IAM converting an e-learning course of Flash AS3 to animate CC - JS. I have the following code for an activity as each button click and see corresponding popups.import flash.events.MouseEvent;for (var i: Number = 1; i < = 5; i ++){This [

  • convert jpg, dng

    I have 95 dng photos I want to convert it to jpg. Is there an easier way instead to open each photo in PS, then saving it as a jpg file?