connection between my laptop Tecra 8000 PC

Similar Questions

• Connection between the laptop and desktop computer

  Hi I have a Tecra 8000 Windows xp pro, is it possible that I can connect the mobile to my PC, which runs on windows xp family, that is the reason for the transfer of material, from one to the other, is there a likely with different windows problem! I have a dvd drive on the laptop, but not on the PC! someone help please.
  cordially aga151

  You need a crossover cable. This cable is designed for a direct connection between two units. The cable is cheap and you can find it in every store in PC.

• OfficeJet Pro 8710: Impossible to establish the wireless connection between my laptop and OfficeJet Pro 8710

  I'm tryng to connect wirelessly between my laptop and printer but I am unable to do so.

  My laptop finds the printer and when I go to add the device I invite me to "Enter the WPS PIN code for your printer". So, I printed out the Configuration Page of the network and it gives me the "wi - fi direct password", which I suppose is the password that is required to establish that it connection (I may be wrong in my explanation). However, when I type the password on my laptop it does not establish the connection. I said "try to add the printer again, or check with the manufacturer for addiitonal installation instructions.

  Any insght and assistance is greatly appreciated.

  Thank you.

  Hello

  You should searh for your wifi network at home and connect your printer and the laptop to the network. Direct WiFi option is really only for configurations that do not have a modem/router.

  You may need to disable the option Wireless directly on your printer to help the wireless configuration.

• Laptop Tecra 8000 - display with almost ZERO light

  Hi all
  I have a problem with the brightness settings for my Tecra 8000.
  I lowered the brightness to the minimum values, but now I'm not able to down to a level that is "visible."

  Thanks for any advice you might have... it's just frustrating!

  Hello

  Refer to the manuals of use s. You can find how to adjust the brightness of the display to a lower or higher level.

  Also check the power sleep settings. On the Toshiba power extensions tab, you can find power schema Extension settings. Here, you can set different levels of brightness LCD.

  Good bye

• No WiFi connection between the laptop <-> printer... printing of habit!

  My laptop does not show a green WiFi level or levels of ink for my Epson SX430 printer and will not print. I've uninstalled and reinstalled the drivers updated as requested. All cartridges renewed and checked... Print test paper after 5 long minutes of waiting. Will not print a document windows? Printer shows RED above copy/printing area. Looked at all areas of problem-solving. Done everything that I can think to start... No chance!

  Hi Suzanne,.

  I apologize for my late reply.

  According to your description of the problem, you are able to work with the printer when it is connected directly to the system via a connection cable. I suggest you try the following steps to diagnose the reason the printer works fine with the system of didn't make any problems with windows except if connected wireless.

  Method 1:

  Run the next fixit and check if it helps:

  Diagnose and automatically fix problems printing and printer

  In addition, check with the advanced sharing settings as described in the following method.

  Method 2:

  I suggest you to change the following options in the Advanced sharing settings (Open Network & Sharing Center > Advanced sharing settings to change):

  -Enable network discovery

  -Turn on the file and printer sharing

  -Turn on sharing so anyone with network access can read and write files in public folders

  -Turn off password protected sharing

  Check if you can connect to the wireless printer.

  In addition, please try the steps outlined in the following link:

  Solve printer problems

  Hope this information is useful. Please post back your results for assistance.

  Thank you.

• Satellite 2410-304, configuration of wireless connection between two laptops

  I need help on lan wireless setup.i don't know what it.i have a s2410-304 and an a10 1514.need something else? If this isn't the case, please write everything on 'how to setup' step by step...

  Hello
  I think the best way to get comfortable with your Wifi network is to study "how to build a Wireless Home Network - tutorial.

  Follow this link-> http://compnetworking.about.com/cs/wirelessproducts/a/howtobuildwlan.htm?iam=metaresults&terms=home+hard ware + tools

  Good bye

• Tecra 8000 - TV on WXP

  Does anyone know what I should do to make it work on the laptop Tecra 8000 TV connection output? I have Win XP OS installed.

  When I connect the video cable, the TV screen is all black. I can connect my desktop PC to TV the same way and it works. The laptop has Magic Media 256AV video card. I thought that maybe the problem was with the driver, but I can find them only for Win 98.
  Thanks for your help.

  AFAIK this Tecra older is not delivered with WXP which means that you use your own installation of the OS. In this case check the graphics card setting to activate the TV option.

  It seems that Toshiba doesn't support WXP for this device. Try to find the driver WXP on the card manufacturer download page.

• Tecra 8000: Question about upgrade hard drive

  Hello

  I recently bought laptop Tecra 8000 PII 400 MHZ. The laptop has 10 GB of hard drive.
  I want to increase my hard drive, which is a maximum size of the HD can I increaes in my laptop?

  Thank you

  Hello

  Unfortunately there is no official document on a maximum size of HARD drive, but I think you can use a 20, 30 GB without any problem.
  You can ask the service for a partner caught max supported size HARD drive or HARD drive dealer.

  Good bye

• Try to set up a direct parallel connection between two computers in Windows XP Home edition

  I tried to set up a direct parallel connection between two computers in Windows XP. I have the right cable (CAT 5 Ethernet connection) and you can set up the connection on my own laptop, but when I go through the installer on another laptop it create new connection-establishment of advanced connection--> when the next window opens asking me to choose between "accept incoming connections" and "connect directly to another computer" (which I need to select) for the second option is grayed out and not can not be selected.

  The same thing happens when I try to implement the same connection between my laptop and the desktop we have. All of these computers are running on Windows XP service pack 2. I really need help with this because I'm about to start pulling my hair.

  Any help would be very, very, much appreciated.
  Thank you

  Hello

  Check it please this subject http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=3423&messageID=11170

  I hope this will help you.

• Need info on RAM for a TECRA 8000

  I'm looking for a bit of RAM for my old laptop Tecra 8000 PII 300 model n PAT800E-B94A-GR.

  Can I use 256 MB or larger? What is important to look for? I have no much experience in computer hardware.

  Who has an idea?

  Thx for all the help of the Germany Thomas

  Hello

  I found some interesting info on this good old classic. Your Tecra can handle with max 256 MB of RAM. Tecra 8000 has two memory slots, and you can use two 128 MB modules.

  Module 128 MB compatible is with PA2062U part number.

• Tecra 8000 - installation of update of the BIOS & XP or ME?

  I got the task of sorting of a s laptop Tecra 8000 a friend who is completely riddled with spyware and viruses. After killing most of the infections I backed up what I have to and decided the best course of action is a reconstruction of the BONE.

  I don't know what operating system to suggest that it installs. Will install and make ME use Win98 drivers or if this is not recommended (I have no experience with ME)?
  XP would be a better choice with its own pilots (reading the posts on here that SP2 causes slowdowns well)?
  Either the OS above with a Bios Update will be necessary? If so the update of the Bios from 9, 30-trad does not require a 500 MHz + processor? The Bios will tell me the CPU speed?
  I found information on how to install the updates to the Bios; I just check that I can install the 9.30 - trad on a Tecra 8000 with a processor more low spec?

  Thank you very much
  JBW

  I installed the trad 9.30 on my tecra 8000 233 mhz without problem. European downloads have the 500 mhz different bios updates voor and lower. The trad version is for lower versions.
  The American downloadsite have only 1 bios, the 9: 30 for all machines.
  It confused me, so I took the trad 9.30 which is safe for all machines under 500 mhz.

  Good luck... not to mention that I installed winxp pro on it and it runs smooth, I only dissabeld a large number of services that run in the background that wheren can't used to free the memory.

  Rick greetings

• WiFi - how to connect to Orange Livebox - Tecra A5

  I can't connect my computer laptop Tecra A5 to my Orange Livebox can you please help DO NOT if in this situation Orange contact they are inept and useless their telephone advisors do not even know the phonetic code in the explanation of the typing/editing etc. codes and are difficult to understand is not located in the United Kingdom

  Sorry to ask but what about the manual of the device?
  Generally, all products should be delivered with an own manual.

• Need help installing a Tecra 8000 wireless

  I just bought the wife an old laptop tecra 8000 and like to run wifi on it, I bought a d-link router and a d-link usb adapter, but he said I would impose a usb high speed and it n, t, raise the router a pcmia card would work better, also can anyone suggest a modem/router and card that works on it, any help is appreciated...

  Hello

  The Tecra 8000 supports only USB 1.1 standard.
  Are high speed USB 2.0 ports
  Many USB devices are designed only for USB 2.0 and I guess that your USB WLan adapter also supports the 2.0 standard.

  The PCMCIA should work better. There is no standard limitations as on the USB ports.

• Tecra 8000 - how to connect the HARD drive to another laptop?

  Hello, what kind of camera do I need to connect an old hard drive Tecra 8000 to a laptop from another production?

  I want to just transfer some data, but the connector on the Tecra ac no longer works.

  Hello!

  You can use a drive enclosure external DRIVE with USB port for this.
  The external HARD disk enclosure should be for 2.5 s HDD with IDE interface. All that s.

  Contact your local computer dealer. I'm sure they will have these cases.

  Good bye

• Tecra 8000 and broadband connection

  Hi all

  I recently asked to watch Tecra 8000 a friends (PII 233) and give it a bit of an update... Don't know why the most I've ever done, is to add a few small components in my PC at home!

  My question is - is this possible for a connection broadband to be put in place - I looked all over the laptop, but don't find nothing which would suggest it is possible.
  (Also what other improvements should be can) watching us.

  Sorry for the noobness, but any help is greatly appreciated.

  Thank you

  Ben

  Wow this is really an oldie
  Broadband do you mean the LAN port?

  As far as I know that the Tecra 8000 was not equipped with LAN port.
  It s really amazing but it is a fact

  However, if you want to use LAN then I advise you to buy a PCMCIA (Cardbus 32-bit) LAN card that would be allows to connect the Tecra 8000 to LAN.

  See you soon