Connection between servers and opening default home
Question about cross-server logon, if a customer has changed their rules of routing so that the default value at the opening of "wishes" is no longer used and a different call handler is used instead, will be this connection between breaking servers? Looks like that connection between servers using backdoor functionality (# and some numbers) which works with the 'Opening of wishes' system, I understand this right?
No, it is not hardcoded to opening greeting Manager of appeal, but he needs to finish a greeting (whether for a Subscriber or call handler) - the logic is handled in the PHGreeting conversation (the guy that is used for the treatment of the call manager/subscriber wishes) - so if you have a routing rule that say, load the sign the Subscriber in conversation, then you're going to break.
But as long as the call is handled by _some_ greeting, the hand of logic should work because the conversation PHGreeting is looking for a specific series of TTS to indicate that it is a grip of calls.
Tags: Cisco Support
Similar Questions
-
Persistence of extension Illustrator between close and open again
I create an extension in eclipse that redirect a web where I have connection and I have the possibility to connect the Panel and don't forget the user.
All works well, but if I close illustrator and open once again, I think that it does not record this information and I need to connect again.
I use windows 8 and chrome as default browser.
It's something on the configuration of the cookies? In Xavier are enabled.
How can I activate the persistence of my extension between close and open illustrator variables? It is a web application.
Best regards
José Couso
Hello
Yes, later versions have activated persistent cookies.
Best regards
Hallgrimur
-
Localhost UDP connection between FCR and Matlab
Hi all
I have a question about the connection between Matlab and FCR UDP. My idea is to Exchange data between Matlab and Labview on the same computer.
So I found the 'UDP Simple' of the FCR 2.0 sample project where periodically a datasample is generated randomly and sent to the remoteport 61557 local host. In the project a 'fractional number of string for transmission' is used for the transmission of data. The receiver of the sample project reads from the same port to receive the datasample.
Now, I'm interested to read this simple stream from Matlab (just at first), however, it does not work and I'm not sure why. What I do in Matlab is the following (code Matlab)
delete variables;
u = udp ('127.0.0.1', 61557); % Of installation UDP Object
fopen (u); open reading port %
A = fread (u, 1); % read an element
fclose (u);With this code, however, I get a timeout by saying: "' WARNING: unsuccessful reading: the amount of data specified has not been returned within the time limit." "
I'm not sure why this happens, maybe you could help me out here? I guess that the formet serving to VCF is not the same as in Matlab? Maybe the Terminators are not the same?
See you soon,.
Steve0
Hey
So, regarding the problem actually, I found the solution today. It was not the firewall, but a simple configuration in Matlab seting the UDP port. So the side of Matlab, to change the definition of udp object according to
u = udp ('127.0.0.1', 'Thelocalport', 61557);
If you have
u = udp ('127.0.0.1', 'Thelocalport', 61557);
fopen (u);A = fread (u)
fclose (u);
Delete (u);Who does the trick and you can read from the port. Then of course you say Matlab that you read from the "LocalPort" x, which I wasn't aware of.
On the transmitter side, you simply:
u = udp ('127.0.0.1', 61557);
fopen (u);
fwrite (u, '1');
fclose (u);
Delete (u);Here, you set just the port of transmiting.
About the format of the data: I used the simple UDP protocol streaming Comms project where a random number is generated as a double, transformed into a string (ASCII values) and transmitted. At the level of the receiver, you get as much the UDP packet with the ASCII values that you must turn if you want to find the number.
I hope this helps anyone having the same problem.
See you soon
-
Establish a persistent connection between client and server
My application must keep in touch with my servers, the HTTPConnection gives the ablitity to make one request per connection. Then the HttpConnection might not make persistent connections in the BB. I think I can use Socket connections. I am wonding if some body can confirm that and give some sugustions how persistent connections between clients and servers.
Thank you RexDoug and Marchywka. Your suggestions are appreciated.
-
Hi, I am creating the database link from a database of Oracle 11 g PostgreSQL with DG4ODBC and unixODBC
My configured for /etc/odbc.ini
[PostgreSQL]
Description = Test to Postgres
Driver = psqlodbc
Trace = Yes
Trace file = /tmp/sql.log
Database = danieldb
ServerName =
UserName = SA
Password = password
Port = 5432
Protocol = 6.4
ReadOnly = No
RowVersioning = No
ShowSystemTables = No
ShowOidColumn = No
FakeOidIndex = No
My configured for /etc/odbcinst.ini
[ODBC]
CommLog = 1
Debug = 1
FileUsage = 1
Layout common = No
Trace = 1
[psqlodbc]
Description = PostgreSQL ODBC driver
Driver=/usr/lib64/psqlodbcw.so
CommLog = 1
Debug = 0
FileUsage = 1
My configured for /u01/app/oracle/product/11.2.0/xe/hs/admin/initPostgreSQL.ora
HS_FDS_CONNECT_INFO = PostgreSQL
HS_FDS_TRACE_LEVEL = 0
HS_FDS_SHAREABLE_NAME = /usr/lib64/libodbcpsql.so
Set ODBCINI=/etc/odbc.ini
My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/listener.ora
Listener =
(ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PostgreSQL)
(ORACLE_HOME=/u01/app/oracle/product/11.2.0/xe)
(PROGRAM = dg4odbc)
(ENVS="LD_LIBRARY_PATH=/usr/lib64:/u01/app/oracle/product/11.2.0/xe/lib')
)
)
My configured for /u01/app/oracle/product/11.2.0/xe/network/admin/tnsname.ora
PostgreSQL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521))
(CONNECT_DATA =
(SID = PostgreSQL)
)
(HS = OK)
)
I'm trying to created public database link:
CREATE DATABASE LINK PUBLIC 'orapos' CONNECT to 'HIS' IDENTIFIED BY 'password' USING 'PostgreSQL ';
When I used tnsping
[root@oracle-poc admin] # tnsping PostgreSQL
AMT Ping utility for Linux: Version 11.2.0.2.0 - Production on May 16, 2013 20:34:19
Copyright (c) 1997, 2011, Oracle. All rights reserved.
Use settings files:
/U01/app/Oracle/product/11.2.0/XE/network/admin/SQLNET.ora
TNSNAMES adapter used to resolve the alias
Try to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP) (HOST = oracle-poc)(PORT = 1521)) (CONNECT_DATA = (SID = PostgreSQL)) (HS = OK))
OK (0 msec)
and finally, I try to use the database link:
"SQL > select * from tabel2"@orapos ".
2;
Select * from 'tabel2"@orapos '.
*
ERROR on line 1:
ORA-28500: connection between ORACLE and a non-Oracle system has sent this message:
ORA-02063: preceding the line of ORAPOS
What wrong with my setup?
Thank you and best regards,
Daniel
Daniel,
The problem is that you are using the ODBC Postgres driver for the HS_FDS_SHAREABLE_NAME parameter, but this must be an ODBC driver manager and not the driver ODBC Psotgres.
Go to the.Click the 'Download' and follow the instructions to download the 2.3.1 pilot and make libraries and programs.
Once this is done, then use the driver as parameter HS_FDS_SHAREABLE_NAME Manager, for example-
HS_FDS_SHAREABLE_NAME =/home/odbc64/unixODBC/2.3.1/lib/libodbc.so
Depending on where you install it.
Kind regards
Mike
-
Bluetooth connection between iPhone and iPad
My iPhone 6 does not connect to my iPad via bluetooth.
I previously used the bluetooth connection between my iphone and iPad to connect the iPad to the internet. Despite the two devices were among the recognized bluetooth devices and they were previously linked/partner, it was not possible to establish a connection.
Perform the actions recommended for repair/reissue apple support - 1. Toggle bluetooth, 2. turn on/off the unit, 3. remove the iPhone/iPad bluetooth connections - 4. Reset network settings - 5. Reset all the settings-, nothing works.
IPhone/iPad devices isn't even on the list of bluetooth devices available on the iPhone, or iPad. Everything that happens is the animated icon turns all the time.
Deleting a connection to a device and bluetooth speaker/amp from the pairing of the speaker/amp system process made a new connection.
iPhone 6:
Model: MG4F2QN/A
SN: C31NLG8KG5MR
Version: 9.2 (13 c 75)
iPad:
Model: ME898LL/A
SN: DLXM42LHFK13
Version: 9.2 (13 c 75)
Please give instructions for the previous maintenance work bluetooth connection between iPhone and iPad.
Thanks in advance
To use the Hotspot feature (that you described for the connection), you must use the instructions below.
Share your Internet connection with Personal Hotspot - Apple Support
-
Network connections between VM and host is slow?
I have problems with the speed between the host and the VM, connections is limeted and very slow. I'll open the file and copy and it's slowly. My OS is VISTA Business and VM on XP SP3. Connection between VM card is limited to me and see that trafficking is not very practical. If this can be rectified and speed up the connection between the virtual machine and the host.
As I have written, you can use both at the same time. Just add a host connection only to the guest and make sure name resolution, host name (and the name of the client to the host) using the IP addresses assigned by DHCP VMWare Server for the host only (VMnet1, default) connection. The file "\system32\drivers\etc\hosts" ensures that this connection will be used, for example.
-
Connectivity between Interconnect and Nexus 2000 fabric options
Hello
I would like to know what models of fabric nexus 2000 Extenders can I use if I want to connect them to a pair of interconnections 6248UP fabric in a FEX deployment, so I can move between blade and rack servers service profiles.
Thanks for your replies.
Christian
Christian,
Take a look at this guide. It should answer all your questions:
Kind regards
Robert
-
Ad hoc connection between XP and Android
How can I set up a wireless ad-hoc, with shared Internet access, between a Windows XP computer (connected to Internet) and an Android device?
Hello
You can see the following link.
How to create an Ad hoc network using Win XP
Note: also applies to Windows XP as well.
Please provide us with more information on the Android device and the version of operation.
-
Difference between House and smart call home.
To my knowledge.
Call home - configure the SMTP server and do a few other configuration, which can allow be to send emails to the recipients you want for all gravity.
Home - Smart call striving to reach the registry auto TAC for severity level.
Is this correct?
I just read the configuration guide and did not understand the importance of the priority of switching...
Shyam,
You're right about your understanding of the difference between CH and SCH.
-Kenny
-
Why can't connect between computers PC under Windows 7 and Mac computers on my network equipment?
without knowing what you have tried and this error message you receive, impossible tosay. site Web as http://www.wikihow.com/Add-a-Mac-to-a-Homegroup might help.BarbApplication Windows 8 Blog Reader of Barb connected world - http://apps.microsoft.com/windows/en-us/app/barbs-connected-world-blog/02f35769-52bf-461c-b1d5-06e54a58d298Please mark as answer if that answers your question -
JMS connection between glassfish and OSB
We are having architecture where between GlassFish and OSB JMS messages. I have the following questions of design
(1) what is the best way to send messages between these two App servers? (I mean use the JMS bridge or regularly use JNDI lookup and send the message and so on)? We want to send messages in both directions between these two App servers.
(2) how we use JNDI search inside glassfish for OSB. We use an approach by providing the full client jar fat weblogic. (53 MB) Is this the only way? Is there any thin weblogic client that we use for queue search OSB of glassfish?
Thanks in advance.Using a JMS client WL on GF has limits on XA/JTA, consuming messages from distributed locations and securing individual destinations. Workaround for the latter is to avoid to set ACLs on WL destinations and use SSL to encrypt network traffic if you wish.
I recommend the following general method: (1) avoid using WL JMS on the GF level clients if you need exactly once the e-mail or require the consumption of a distributed destination and (2) use OSB or WebLogic foreign seller JMS integration facilities for either (A) bridge/transfer messages between WL JMS and GF JMS or call (B) GF JMS directly the WL/OSB tier.
If you don't want to use a jar full of WebLogic as a customer, there is a pot of customer 'thin' t3 equivalent available in the latest version. I recommend the full jar unless a small pot size is an important condition in your use case. I recommend the thin 't3' jar on the thin "wl" pot as the pot thin t3 tends to have much better performance. Or the other of these clients can interact with older versions.
FAQ for vendors integrating a Remote JMS summarizes the Server WebLogic tools available for the integration of foreign suppliers (http://download.oracle.com/docs/cd/E14571_01/web.1111/e13727/interop.htm#JMSPG553). I'm not familiar with a tool equivalent/layers of OSB.
The stand-alone Clients documentation lists different JMS (http://download.oracle.com/docs/cd/E14571_01/web.1111/e13717/basics.htm#SACLT122) client options.
Kind regards
Tom
-
Heterogeneous connection between Oracle and Postgres.
Hi all
I am trying to connect heterogeneous Postgres and Oracle for a few days, but I've always seen this error: "loss of the RPC connection.
First of all: I use Windows 7, Oracle 10 g and PostgreSQL 8.4.
I did the following:
(1) create a system DNS named "PG". (The connection test is OK)
(2) to create the file 'initPG.ora' in ' $ORACLE_HOME/hs/admin:
# This is an example of initialization file of the agent that contains the HS settings
# needed for an ODBC Agent.
#
# HS init parameters
#
HS_FDS_CONNECT_INFO = PG
HS_FDS_TRACE_LEVEL = WE
#
# Required for the non-Oracle system environment variables
#
#set < varenv > = < value >
(3) configure the file 'listener.ora' (in ' $ORACLE_HOME/NETWORK/ADMIN "):
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(= Extproc PROGRAM)
)
(SID_DESC =
(SID_NAME = CLRExtProc)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(= Extproc PROGRAM)
)
(SID_DESC =
(SID_NAME = PG)
(ORACLE_HOME = C:\oraclexe\app\oracle\product\10.2.0\server)
(PROGRAM = hsodbc)
)
)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC_FOR_XE))
(ADDRESS = (PROTOCOL = TCP) (HOST = Cédric-PC)(PORT = 1521))
)
)
DEFAULT_SERVICE_LISTENER = (XE)
(4) set up the 'tnsnames.ora' file (in ' $ORACLE_HOME/NETWORK/ADMIN "):
XE =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP) (HOST = Cédric-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = XE)
)
)
PG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp) (HOST = Cédric-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PG)
(HS = OK)
)
)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC_FOR_XE))
)
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
)
)
ORACLR_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC_FOR_XE))
)
(CONNECT_DATA =
(SID = CLRExtProc)
(PRESENTATION = RO)
)
)
(5) Finally, I create my DB-Link and test it:
CREATE DATABASE LINK 'CENTRALE_POSTGRES' CONNECT TO 'user_login' IDENTIFIED BY 'user_password' USING "PG";
SELECT * FROM 'dual"@CENTRALE_POSTGRES;
I got this error:
ORA-03135: interruption of the RPC connection.
As you can see, I have activated the trace level (HS_FDS_TRACE_LEVEL = WE), but the still empty directory ' $ORACLE_HOME/NETWORK/trace.
Any ideas?
Concerningthe alias PG tnsnames.ora is wrong — you must have 2 closing brackets after the so that HS SERVICE_NAME = OK is outside the CONNECT_DATA as:
PG =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = tcp) (HOST = Cédric-PC)(PORT = 1521))
(CONNECT_DATA =
(SERVICE_NAME = PG))
(HS = OK)
) You should know also HSODBC to release 10.2 was desupported since March 2008 and it was replaced by its product follow-up DG4ODBC V11
-
WAN connection between security and connection of servers?
Hi all
one of our clients wants to place its servers view Horizon 5.2 security in remote data centers and servers to connect in their headquarters. They have two DMZ environments to hosting provider data centers and they want to fill it with 2 security servers each for redundancy. I have currently no accurate information on the speed and latency (and packet loss). I know that connection servers sharing the same ADLDS need connection to the LAN due to replication requirements strict, but what security servers?
Can I put my security servers in a region far away and have them matched (and PCoIP routed by gateway) with servers to connect to Headquarters via a WAN connection?
Kind regards
Jacques.
That's fine, as long as they have properly configured firewall rules, but I have to ask: what are they hoping to win this configuration - is-to-end latency lower and upper for remote users of the local data center and then goes on the link of the site, instead of going on the internet directly to the headquarters of the bandwidth?
-
Cann't open web access, ssh connection between host and bridged the VM in network mode
I have a VMware workstartion 7.0 is installed on a machine XP 64 (192.168.2.44). I have the following virtual machines.
1 ESX 4.0 (192.168.2.42)
2 ESX 3.5 (192.168.2.38)
3. windows server 2003 with vCenter installed. (192.168.2.100)
4. Windows server 2003 with the roles of DNS and DC. (192.168.2.101)
I am trying to connect to vCenter or ESX VM of the XP hosting web interface. However I can't get through. but I can ping and I can also telnet to ports 443, 80. Even I can't ssh connection. When I use putty, it is actually connected but no response from the ssh server. Looks like the network connection is there, somehow the server process responds simply not properly once the connection is established.
BTW, all of them use bridged network, they all 192.168.2.x IPs. I can connect to vCenter, ESX web interface from another computer without problem.
Just wonder if anyone else has experienced this before. I have tried to search the forum, did not find a similar question.
Thank you!
Tong
Your host, try to disable (temporarily) a "discharge" for the NIC settings.
http://KB.VMware.com/kb/1015940
If this solves the problem, other threads on this issue have mentioned that a fix for this will be included in the next version of the 'point' of Workstation 7 (as 7.1, etc).
Maybe you are looking for
-
To the right of the last tab, there is a cross (x). If I wanted a new website to be open all keeping one in that I was, I clicked on this and she has opened a new page and I could go to other sites of my choice. The cross is gone, and I can't find ou
-
can I get an annual plan for storage iCloud?
can I get an annual plan for storage iCloud?
-
Call control panel upward on the iPhone 6 s
I can last days of work is more drag up to quick access the Panel control, everything just stopped. Any ideas on how to solve this problem? I use the flashlight and enable and disable the wifi there all the time and miss it. BUrlgirl
-
There is an option to define the border of a DisplayObject to a certain color. Is it possible to use an image for the border? A custom border?
-
Need help! I want to be able to print coupons. I ask to select a program to be able to print coupons in a store of min... How to fix? Original title: computer crashed