connection client bluetooth (Android phone) to the server of VI

Similar Questions

• OVD: Not a connection is valid. Check if the server is SSL is activated.

  Hi all

  If I try to connect with the /odsm repository, pops up the following error:

  Not a connection is valid. Check if the server is SSL is activated.

  I don't know if someone has changed our Setup, because OVD-connection was correct. How can I insulate the position of the error?

  Kind regards

  Ministry of health

  Please run / "opmnctl status-l. Then check which port OVD is running on. This should help you on this question.

  I hope this can help,

  Thiago Leoncio

• When connecting with an Android phone through Verizon for attaching to the internet, receive the message "Microsoft (C) registry of Windows has stopped working".

  twice now that I got "Microsoft (C) registry of Windows has stopped working". Looking for online solutions, it tells me to update... and yet my Windows Update is underway. What is going on??

  I am traveling and using my Android phone by Verizon to tie to the internet... This could be the cause?

  Hi BetheForcia,

  Exactly when you receive this error message?

  Usually, this can happen due to data execution prevention.

  In order to diagnose the problem, you can check in the event viewer to determine the cause of the error and after return with details of the event viewer.

  What are the information in event logs? (Event Viewer)

  You can try to add it in the exception for the prevention of execution of data and check that it works.

  a. go to Start, Control Panel and click on System.
  b. now, click on the Advanced tab, and under performance, click settings.
  c. click on Data Execution Prevention , and then select the Turn on DEP for all programs and services except those I select: radio button.
  d. now click on the Add button and navigate to C:\Windows\System32 and choose the regsvr32.exe file. When you receive the message indicating it could make your computer becomes vulnerable to attack and unprotected, simply click OK to continue.
  e. click OK , and then click OK to exit

  Hope the helps of information.

  Please post back and we do know.

• Direct connection on the desktop - clients still losing access when the server goes down or rebooted service

  I set up the connection to the server with a link Direct is TICKING, I did that once the initial connection has been made for the broker and an assigned desktop computer, connect directly to the desktop and so not care about the State of the connection to the server. After restart or just restart the VMware View Server service all customers lost access until it is facing up.

  Is it right, that we use View 3.1.

  Thank you

  It's strange that I can restart my server connection without worrying about all the users.   How brokers connection you have and do you have activated all at direct connection?

  If you have found this device or any other useful post please consider the use of buttons useful/correct to award points

• Android phone and exchange server activesync.

  I'm on Windows Small Business Server 2003 and synchronizing email with android phone, but I have problems. I get an error message "Setup could not finish can not connect to the server" any body know how to fix this please?

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/category/SBSServer

• How to access a were wireless one Android phone on the Labview software?

  Currently on Android phones, there is an app called Ipwebcam Compatible. It does the app allows the camera to be used as a wireless were and shows that the IPaddress.I'm connected wireless through my router. Is it possible to use this camera in labview. I tried to access in the LabView Vision Builder for Automated inspection. Also, I had no chance and no indicator that its being detected within the software. However, I can veiw access it just by typing in the data ipadress and the port number. Any tips?

  I am interested in this too.  Did you ever work?

  Thank you

  Mike

• Trying to connect my Samsung mobile phone and the camera to my PC

  Original title: device

  I'm trying to connect my cellphone samsung & camera to my pc, it came to say its there, but do not open please any help [ps [PS IAM 80 YEARS so do not hard & Ireally do thank you for any help]

  Hello

  1. what exactly happens when you try to use the device?

  2. do you get any error messages?

  3. what version of operating system do you use?

  4. What is the model of the devices?

  5 did you do changes on the computer before the show?

   

  We can share data in the phone and camera with PC only when install us the drivers for the devices. I suggest you follow the methods mentioned below.

  Method 1: Run the hardware troubleshooter

  See the following site:

  Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Update the drivers

  Updated a hardware driver that is not working properly

  http://windows.microsoft.com/en-US/windows7/Update-a-driver-for-hardware-that-isn ' t-work correctly.

   

  If the problem persists then I suggest you to download the driver for the device according to the model.

  You can try to download the drivers on the site mentioned below:

  http://www.samsung.com/us/support/downloads/.

  I also suggest you to reference the sites listed below:

  How to transfer media to your Android phone.

  http://www.samsung.com/us/article/how-to-transfer-media-to-your-android-phone/.

  http://www.samsung.com/global/allshare/pcsw.

• VCenter cannot connect to data/clusters warehouses when the server is added to the field!

  Hello

  I have a server windows 2008 standalone client console VSphere, I can see/Manage my

  Data warehouses, clusters, vm machines, etc very well and I can communicate by

  another pc using the console of the customer very well...

  I need to join the server to a domain as active directory, as soon as I join it

  Run the vConsole I can get in but all in shows like

  "disconnected" and have a red mark on it, so I can handle anything... to this

  point my another pc running the client can't connect to this server more

  or the other...

  If I sever the domain server everything goes back to normal and

  can access all new... Why is this happening?

  There is no specific rules / have permissions on active directory

  who's going to make changes to this server... She joined just for her...  I can't understand why any

  suggestions/ideas?

  Thank you!

  Make sure your windows firewall settings for the domain profile.  There are for the public, area and stand alone firewall profiles in Windows server 2008.

• Registration of the Client Push BlackBerry rejected by the server

  Hi all

  Successfully, I registered for the blackberry push service assessment and received the appropriate credentials.

  However, whenever I try to save my client push service, I have developed with the help of a real device, I get a "rejected by Server error."

  I've only got my credentials 5 days ago, so I don't think that it has expired.

  I use a blackberry 9700 OS 6 to test this.

  The Client I wrote is a variant of the client Push service example.

  Here is the registration code.

  public void register() throws Exception {
          ApplicationDescriptor ad = ApplicationDescriptor.currentApplicationDescriptor();
          //byte serverType = PushApplicationDescriptor.SERVER_TYPE_BPAS;
          PushApplicationDescriptor pad = new PushApplicationDescriptor( PushConfig.APP_ID, PushConfig.PORT,
                  PushConfig.REG_URL, PushApplicationDescriptor.SERVER_TYPE_BPAS, ad );
          // check whether already registered or registration pending
          PushApplicationStatus pushApplicationStatus = PushApplicationRegistry.getStatus( pad );
          byte pasStatus = pushApplicationStatus.getStatus();
          System.out.println("Starting Registration");
          if( pasStatus == PushApplicationStatus.STATUS_ACTIVE ) {
              Subscriber subscriber = new Subscriber();
              subscriber.subscribe();//register again but don't block.
              System.out.println("successful registration");
              return;
  
          } else if( pasStatus == PushApplicationStatus.STATUS_PENDING ) {
              // we already scheduled registration, wait for its result
              print("Registration pending");
          } else {
              // not registered yet, register
              System.out.println("not registered yet");
              PushApplicationRegistry.registerApplication( pad );
          }
          parseRegistrationResult();
      }
  

  In the onStatusChange(), I have this:

  public void onStatusChange(PushApplicationStatus pushAppStatus) {
          byte bpsStatus = pushAppStatus.getStatus();
          byte regReason = pushAppStatus.getReason();
          String error = pushAppStatus.getError();
  
          boolean simChanged = false;
          _regStatus = bpsStatus;
  
          switch( bpsStatus ) {
              case PushApplicationStatus.STATUS_ACTIVE:
                  Subscriber subscriber = new Subscriber();
                  String result = "";
  
                  subscriber.subscribe(); //initiate subscription
                  result = subscriber.getResult();
                  print("result is "+ result);
                  if(result == "s") {
                      print("Whoop!")
                  } else {
                      print("we failed");
                  }
                  break;
              case PushApplicationStatus.STATUS_FAILED:
                  print("registration failed");
                  displayMessage("registration failed");
              case PushApplicationStatus.STATUS_NOT_REGISTERED:
                  switch( regReason ) {
                      case PushApplicationStatus.REASON_SIM_CHANGE:
                          simChanged = true;
                          break;
                      case PushApplicationStatus.REASON_REJECTED_BY_SERVER:
                          print("Rejected By server");
                          displayMessage("Rejected by server " + error);
                          break;
                      case PushApplicationStatus.REASON_NETWORK_ERROR:
                          print("network error");
                          displayMessage("Network error");
                      case PushApplicationStatus.REASON_INVALID_PARAMETERS:
                          // registration failed
                          break;
                  }
                  break;
              case PushApplicationStatus.STATUS_PENDING:
                  print("still pending");
                  displayMessage("still pending");
                  break;
          }
  
      }
  

  Please, what am I doing wrong?

  is it possible that the server eval is evil?

  Problems solved now

• You can write an Excel on the client computer instead of on the server

  I am trying to user cfSpreadSheet functon. The first question I have is, you can write the file on a client computer? I tried, but they all end up on the disk of the server. Scecond question, is there a way to row and column range formatting in CF9.0? SpreadsheetFormatCellRange function is only available for ColdFusion Server version 9.01.

  Thank you.

  You can not write directly on the client computer.  However, using cfcontent, that you can prompt the user to open or save the file.

• Can not play music by connecting the android phone to the car music player

  Hello

  Sir infact I use to play via a usb cable for my portable device (lumia) for pioneer car usb/smartphone player.i instantly buy a Huawei p8 lite and the Player cannot play music located in the just device.i want to know if there is a way to go through.thanks jeAnmichel

  Hello Michel,

  Thank you for details on the issue.

  I also know that the inconvenience that you are experiencing because of the problem mentioned. I will definitely help you.

  I suggest you to re - ask your question on the Android forums help more and better.
  See this link:
  https://source.Android.com/source/community.html

  I hope this information helps.

  Thank you

• Connect 2 or more phones to the SPA3102?

  I have a gateway SPA3102 - out with router (engine).  Using a double adapter into the phone jack can I connect 2 phones to it without damage?

  If I can do that is there a limit on the number of phones: 3, 4, or 5?

  Thank you.

  Rob

  Yes, you can connect 2 phones without damaging the SPA3102 FXS port if their total REN will not exceed 3 - this device can handle up to 3 REN (Ringer equivalence number)

  With most phones, the REN for the phone is printed on the phone itself (often in very small characters, however). Assuming you can find the REN of each phone (which varies generally between 0.1 and 2.0, depending on the type of phone), simply add the numbers (from all the connected phone line devices)

• BlackBerry Smartphones Blackberry Media Sync continues to display 'Please connect a Blackberry smart phone' when the Blackberry Storm is connected to the PC

  About a 2 months ago when I would like to connect my (the first storm) blackberry storm to my computer via the USB cable supplied with the phone, I was able to transfer music from my computer (itunes) to the blackberry via Blackberry Media Sync with no problems (open Blackberry Media Sync, connect blackberry to the computer via the USB port and screen Media Sync would change so that I could sync to the blackberry storm music). I didn't even have to install Blackberry Media Sync in December 2009

  But now after I connect my Blackberry Storm to my computer, the screen of Blackberry Media Sync does not change and continues to display "please connect a Blackberry smartphone. I tried these tips I found online:

  1.) several reboots my computer (windows vista)

  2.) update/reinstall Blackberry Media Sync, then by restarting my computer

  3.) reconnection from blackberry to the computer, then open Media Sync

  4.) Open Media Sync first and then connect the blackberry to the computer.

  5.) installation BlackBerry USB and Modem drivers (even if I can't find the USB driver for it under the Universal Serial Bus Controller when I check in the Device Manager when you go to control panel – system and Maintenance – Manager of devices, but I found a v2 COM4 and COM5 RIM virtual serial Port when you select "devices by connection" under display in Device Manager) or are RIM Serial Port virtual v2 COM4 and COM5 drivers I'm looking for?

  6.) go to Options (on blackberry) - memory and make sure Media Card Support, Media Transfer Protocol (MTO) and Mass Storage Mode Support are resolved on 'On', the encryption Mode is set to 'None' and mass storage Mode Auto activate when connected, it the value "Prompt" although I tried to 'Yes' as well. It says I have 785 MB of memory space of the unit out of 879 MB total memory of the device and 7.1 GB of free space on a total of 7.3 GB of Media Card Media Card.

  None of the above tips and troubleshooting tips worked. I also checked the Blackberry technical solution center but I've not found anything there that has contributed to the other. I found discussions forums online, including issues of people with 'blackberry media sync cannot connect to the device' pop up, but I have not had this pop-up. The Media Sync screen remains just the same as if I never connected the blackberry storm to my computer in the first place even if my blackberry storm recharges via the computer.

  Is there something that I miss or have not yet done? What should I do?

  Too bad. I went to a Verizon store and they me remove the battery and turn the blackberry. Worked like a charm and I can now use Media Sync.

  Also told me that I need to update the software of the phone blackberry using Blackberry Desktop software (I have version 4 and need to update to 5) and make sure to choose to back up files when you are prompted during the update or you will lose all files, the media and info saved on blackberry.

• How Anyconnect VPN users will connect with cisco ASA, which uses the server (domain controller) Radius for authentication

  Hi team

  Hope you do well. !!!

  currently I am doing a project which consists in CISCO ASA-5545-X, RADIUS (domain controller) server for authentication. Here, I need to configure Anyconnect VPN and host checker in cisco asa.

  1 users will connect: user advanced browser on SSL VPN pop past username and password.

  2. (cisco ASA) authentication: VPN sends credentials to the RADIUS server.

  3 RADIUS server: authentication: receipt and SSL VPN (ASA) group.

  4 connectivity creation: If employee: PC so NAW verified compliance, no PC check Assign user to the appropriate role and give IP.

  This is my requirement, so someone please guide me how to set up step by step.

  1. how to set up the Radius Server?

  2. how to configure CISCO ASA?

  Thanks in advance.

  Hey Chick,

  Please consult the following page of installation as well as ASA Radius server. The ASA end there is frankly nothing much difference by doing this.

  http://www.4salesbyself.com/1configuring-RADIUS-authentication-for-webvp...

  Hope this helps

  Knockaert

• How can I connect my BlackBerry smart phone to internet via bluetooth on my laptop connection?

  I have connected my BlackBerry smart phone to my laptop via a Bluetooth successfully, but when I tried to connect to the internet, here's a message appears: your device cannot automatically connect to the internet, you want to enter user name and number manually?

  So, how can I connect my BlackBerry smart phone to the internet via a bluetooth connection?
  Thank you
  Michael

  Hi Michael,

  You must create a connection switched to solve the problem:

  Please follow the steps:

  a. click on the blue Windows logo at the bottom of the screen, then click on 'control panel '.

  b. double-click on "Network and sharing Center." If you don't see this icon, click on "Classic view" in Windows Vista. In Windows 7, click on the "view by:" drop-down menu and select 'small icons '.

  c. click on "Set up a connection or network" on the left side of the window. Select "Set up a dial-up connection" and then click "next".

  d. type the phone number of your Internet Service provider in the box "Dial-up phone number." Type the number exactly as you need to dial it in your area - include the area code if required by your telephone company.

  Enter your user name and password. The ISP gives you this information when you create your account. Check the box "Remember this password" to avoid having to enter the password each time you use the connection.

  f. type a name in the box 'Connection name' which will help you to remember which connection it is.

  g. check the box "Allow other people to use this connection" to make the connection available to all users on your computer.

  h. click the 'Connect' button to connect to the Internet service provider and save the connection. You can connect to it in the future by clicking on the logo Windows at the bottom of the screen, then "Connect To."

  For more ihelp:

  Contact the wireless service provider for more information on how to connect to the internet using mobile phone on PC.

  I hope this helps.