Connection digital projector for laptop Satellite 1000

Similar Questions

• Most recent need graphics driver for a Satellite 1000-Zx

  Hello

  I have a Satellite 1000-Zx which I recently rebuilt since the original CD (for various reasons...). I'm now getting occasional graphic problems which points me Intel of the site to get the latest pilot chart of Microsoft error report.

  However, as I recall I did it before and had problems with the driver advised by Intel, but was eventually done in the right direction by someone here, however I cannot now find the post or even remember my login ID (this is probably a couple of years).

  I have a M 82830 Chipset and am running driver version 6.13.1.2004 dated 02/15/02, can someone tell me what is the correct version for this machine?

  Thank you
  Eliot

  Hello Eliot

  You will be very happy if someone can give you some good information on this good old classic. I think you don't have a lot of choices there. Either you can use driver Toshiba designed, or search on the net for the latest.

  Video card on your laptop must be Intel 830 MG. Intel download page check and maybe you will find latest driver. Google around a bit and I am sure that you will find enough pages to download the latest version of the driver for this card for Windows XP Home edition.

  Good luck!

• Extension memory for laptop Satellite 1110-Z15

  Hello

  I would like to upgrade the memory of my laptop Satellite 1110-Z15 and tried to find a list of approved toshiba memory manufacturers, with no luck.

  Anyone know of any manufacturers approved for computers laptop toshiba because I can't find the type of memory required on the site of components electronic toshiba?

  Thank you

  Sorbet

  Hello sorbet

  I found the information that your laptop can handle with 512 MB max. I guess that your device already has 256 MB. You can use the second 256 MB module and put it in a second slot.

  Part number for the module memory of 256 MB is PA3127U - 1. 25 M.

  Good bye

• When Windows 8 driver for laptop Satellite C660D - 1 H 2 be available?

  When Windows 8 driver for laptop C660D - 1 H 2 be available?

  Probably when Microsoft offers on the market and when Toshiba start offering equipped laptops of preinstalled Win8.

• Connection dial-up for laptop Qosmio F60/05F

  I need dial-up connection.
  This external modem will work with Qosmio F60/05F laptop under Windows7?
  Hadou none taken for phone cable, not dial-up modem not built inside this Toshiba laptop.

  Visit your local dealer and buy the new external dial-up modem compatible with Win7 64 bit.
  I assume that each of them should work properly. Just be sure that they are supported to 32/64 bit operating systems.

• Need some tips to maintenance for laptop - Satellite L40

  Hello

  I have Satellite L40-170, and I have a few questions about her, since it is the my first laptop:

  1 should I remove the battery when it is fully charged and I work on the KT?
  2. If I don't need to use the battery for a period of time (2-3 weeks) I let loaded or unloaded?
  3. I realized how to cleanse the body and screen of the laptop, but I don't know exactly how to clean air vent covers?
  4. I am running XP and the temperature of the CPU, according to Everest varies between 35-55 degrees Celsius, is this normal?
  5. I just read the thread for a L40 fading paint, here in the forum and I grew up very worried, what to do to prevent such an unpleasant effect?

  So, here are my questions for now, I'd be more than happy if I get answers to my questions.

  Thank you in advance!

  CDL 1 & 2 If you work on AC you should removed the battery... But I read it is better for the battery is discharged to 40-50% and then removed... and if you do not use the battery for the longer period, leave is too loaded in 40-50%... There is another opinion - leaving the battery fully charged, but in the two most important is - battery must not be discharged to leave...

  ad.3 vent - use compressed air
  ad.4 temp is ok.
  CDL 5 it is lok as very rare problem, because I don't ' t find any post something like that

• Computer laptop 13-4193nr x 360 spectrum: when I connect the printer for laptop HP spectrum x 360, Windows 10 treats like CD/DVD-ROM, no printer

  I recently bought a laptop convertible spectrum HP 13-4193nr x 360, under Windows 10 Home. When I connect our printer (HP LaserJet P1102w in black and white laser printer) port USB to the laptop, Windows can see the printer and he knows his name correct ("HP LaserJet Professional P1102w"), but does know that the device is a printer. If I go to the Panel and then devices and printers, the printer is displayed in the "Devices" line (with the laptop and the mouse) and not the line 'printers '. If I select the printer entry in the "Devices" line, Windows displays the name of the exact model of the printer, but for the "Category" field, it indicates "optical drive".

  How can I tell Windows that this device is a printer and not an optical drive?

  Hi @RHodnett,

  I'd be happy to help you install your Laserjet P1102. I understand your description that the computer does not recognize the printer as the printer and instead identifies it as an optical drive. Even if you don't see one of the errors mentioned in the following document, I think that the solutions presented may help you find a solution: Printers HP - "device installation failed" or "unknown device" message during Installation USB (Windows).

  Please let me know if that solves the problem, or if you need assistance. If the question is indeed solved, please click Accept as Solution button below. If you need additional assistance, please include any details you think could help me help you and I will do everything I can to help. Thank you.

• HP Envy: Unable to connect with microphone for laptop

  I have some clothes focus cat-earphones that come with a microphone that plugs into a socket of the headset themselves and then has a unique separate cord to plug into the laptop. The laptop also has a single listener of type. I'm on a HP Envy running windows 10. It also has beats audio on it if it's of any help.
  When I plug the computer recognizes only a helmet but there it lists as disconnected. It is said that the same thing in regards to playback sound however I can hear through the headset. I looked through a bunch of forums and support HP itself's website and nothing seems to work. Some people suggested going on the Manager realtek audio, but even if the laptop has about this realtek audio Manager doesn't seem to be here

  Hello

  I thought about it.  Thanks for your time

• Raspberry PI connected with usb for laptop with Labview

  Hello

  Please allow me to introduce myself: my name is Bob and I just graduated from the Bachelor of applied science (Physics), in the Netherlands. In education, I followed a course of programming in Labview. However, the course was not very well if I want to start from scratch. (my programming skills are very poor).

  My goal is to learn the basics of programming in Labview. I want to measure the temperature with a probe for example and read this in Labview. I need a data acquisition for this system. I have a raspberry PI in my possession and I was wondering if I could use it to read the temperature from the USB port of my laptop using the PI raspberry. Is this possible? And I have to run some sort of program on the raspberry PI? Or I could better use another device (Arduino maybe?).

  I hope someone could help me to help me get started with Labview. I'm looking forward to learn how to work with Labview and launch a few projects.

  Thanks in advance,

  Bob

  Are you comfortable with writing code on the invoice, pro forma raspberry? This is where you write the code for the acquisition of data and code to send it on the usb as a RS232 serial port. The LabVIEW program would receive all this and it is a very simple program. There is a tool called Linx box that does all this for the arduino.

  https://www.labviewmakerhub.com/doku.php?id=libraries:Linx:start

• Connection to printer for laptop (wireless) Epson sx425w

  I bought an Epson sx425w (wireless) disc loaded report past on all requirements does not always print?

  Hello

  ·         You are able to print through wired connection?

  ·         What operating system do you use?

  ·         The device is recognized in Device Manager?

  ·         Do you have an error message when you try to communicate with the printer?

  If you use Windows 7, try to run the printer Troubleshooter and check that if it helps, here are the steps:

  Open the printer Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Under hardware and sound, click use a printer.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  I also suggest you to visit these links for more information on how to install a printer:

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer-on-a-home-network

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  http://Windows.Microsoft.com/en-us/Windows7/connect-to-Bluetooth-and-other-wireless-or-network-devices

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  Please provide us with more information so that we can better help you.

  You can also contact the support site of Epson to known technical issues.

  http://www.Epson.co.uk/contact-us

• Window 7 64 bit need drivers for laptop HP 1000-1411TX

  Hello world

  I know HP 1000-1411TX use for window 8, but I don't want to use it. (I think it does not fit for many program)

  Can you help me find the drivers and drivers Windows 7 for AMD Radeon HD M 7450?

  Much thanks in advance.

  Hello:

  Here is the link for the W7 driver, you can try the GUI.

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D2%257CswItem%253Dob_112859_1%257CswEnvOID%253D%257CitemLocale%253D%257CswLang%253D%257Cmode%253D4%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  Audio:

  Accept the agreement, download and install the file second on the list (64-bit).

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=24&PFID=24&level=4&Conn=3&DownTypeID=3&GETDOWN=false

  Then you should be able to use the rest of the W7 x 64 drivers and software for this model (except audio and graphics).

  DO NOT USE ALL DOWNLOADS OF BIOS OR FIRMWARE FROM THIS LINK

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=5278311

• BlackBerry smartphones can not connect the torch for laptop

  OK... I downloaded, rebooted, reconnected, clicked, clicked, installed, uninstald and still I can't get my torch to connect to my laptop... Help please...

  This is how, according to RIM:

  http://www.BlackBerry.com/BTSC/KB10144

  I hope that helps you.

• Need driver XP for pioneer DVRKDO8A DVD - RW for laptop Satellite L

  Need driver for dvd - rw pioneer dvrkdo8a for Windows XP SP3.

  Hello

  May I ask why you need this?

  To be honest, this driver doesn t exist.
  I mean the driver disc is part of the Windows operating system (XP, Vista, etc) and you need t install it.

  You internal CD/DVD drive should be recognized automatically after installing XP.

  Greetings

• Can't install ATI driver for laptop Satellite 1900

  I have the satellite 1900 203 and I have downloaded the driver winxp, but whenever I try to install it it say
  (Setup cannot copy the fileati2mtag.sy_) any1 have an idea?
  How can I contact technical support?

  thanx

  Hello

  It will be interesting to know what driver you downloaded exactly. This driver from ATI or designed by Toshiba?

  I put t know not in what country you live, but on this page you can find the right address http://www.toshiba-europe.com/eu/contact/details.asp?group=By+Country.

  Good bye

• Try connecting the monitor for laptop Dell Inspiron 6400

  Can someone help, please? I get a message on the screen saying check cable signal. I tried to restart and to be honest I don't know if I am pressing on the buttons to the right in the display settings :(

  Please help if you can I would really appreciate it! Thank you.