Connection error of windows services and planning EMP problem

Similar Questions

• Unable to connect to a windows service and as no internet connection

  Hello

  According to the title above, please help as I am not able to connect to the internet. I am posting this work...

  After I turn on my computer, I received this message:

  "Unable to connect to a windows service. Windows could not connect to the System Event Notification service. This problem prevents limited forest exploitation form used on the system. As long as administrator, you can go through the system event log to see why the service failed"

  From what I've read of other people with the same problem, I realized that they are able to have the connection to the internet.

  Hello

  1. you remember of any change to your computer before the problem?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Check if the Service Notification of system events is running or not. To check the services

  a. click on start

  b. in the start search box, type Services

  c. click right on - RUN as ADMINISTRATOR

  Check if benefits described has City status and startup type.

  System Event Notification Service started automatically

  Step 2:

  Might as well not connect to Internet is concerned, you can follow these steps and check.

  I suggest that you connect the Ethernet cable and start your computer in safe mode with network and check if you are able to connect to the Internet.

  See also:
  Why can't I connect to the Internet?

  Also valid for Vista.

• Connection to printer Windows XP and Xerox 7132 problems

  I am running Windows XP, Windows Vista and Windows 7 on a network connected to a printer xerox 7132.  The XP machines will be able to send some documents before losing the connection.  I tried to remove and install but still the same problem each time.

  If anyone has had similar problems and know a fix?
  Hello by the way the Forum!

  Hello

  (1) did you nay recent Hardware / Software changes prior to this question?

  (2) you are able to print from other computers?

  (3) what is the exact error message while trying to print from XP computer?

  (4) how many computers are connected with the network?

  (5) the issue is with the printer or are you affected by network Windows XP problems?

  (6) did you check the printer connected locally to the computer?

  Check the city link FIXIT who may help you fixing the issue below.

  Method 1: Diagnose and automatically fix problems printing and printer

  http://support.Microsoft.com/mats/printing_problems/

  You can also try to download the latest drivers and update the Firmware that can help you.

  Method 2: WorkCentre 7132 support & drivers

  http://www.support.Xerox.com/support/WorkCentre-7132/downloads/enus.html?OperatingSystem=WinXP&fileLanguage=en

  Hope this information helps.

• When I start my computer I have the error message: "failed to connect to A Windows Service.

  A few days ago, I received this message by turning on my laptop:

  "Could not connect to a Windows Service - Windows cannot connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. »

  However, when I go in the view of the event log, the "Event Viewer" window opens and I get this error message:

  "The event log Service is unavailable. Check that the service is running. »

  There are several other programs that will not open not because the message "failed to connect...". "appeared.

  I received help with back - light to the Windows event log. Everything was going well until I arrived at the end status section, instead of saying "started" it said "stopped". I've changed the status in the direction of "on the road" and then received the following message is displayed:

  "Windows could not start the multipoint Windows event log on the Local computer. Error 1747 - the Authentication Service is unknown. »

  What should I do now?

  Hello

  I suggest you follow under method that can help you solve your problem:

  Method 1: try to make the SFC scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 2: Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Error message "unable to connect to a Windows service.

  Whenever I boot my Toshiba ultrabook and go to Internet Explorer (not the tile splash screen), I get an error message: "unable to connect to a Windows service. Windows could not connect to the Service Agent all Windows users. This problem prevents standard users connect. As an administrator, you can view the system event log to see why the system has failed. "One of the consequences, it seems that when I go to my Windows Live email account via the Mail tile, it is no longer updates the Inbox (to any new email here for the last week or two). Another application (XE) is now longer provides updated information on its tile.

  What should I do?

  Hi Chris,

  Thank you for the update.

  I suggest you follow these steps to start the Windows user all install service agent and check.

  a. press the Windows key + R and type services.msc.

  b. search for Windows user all install agent service and right-click on it.

  c. Select Properties and dependencies tab.

  d. check the competent services for the process and close the window.

  e. now search DCOM Server process Launcher and set the type to be automatic and start the service to start.

  f. now seek the End Point Mapper RPC and set the type to be automatic and start the service to start.

  g. now go again to Windows user all install agent service and set the type to automatic and start the service to start.

  h. now, reboot the computer and check the status of the service. If it is not started, start it and look for the question.

  Let us know the status of the issue.

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Windows 7 error: unable to connect to a Windows Service

  I have problems with my computer.  When I turn it on I get the following message and I can't connect to internet:

  Unable to connect to a windows service 
  Windows could not connect to the system event
  Service notification service. This problem prevents
  standard users to log on to the system.
  As an administrator, you can review the system
  Event log to see why the service has no
  answer

  I am running Windows 7 Enterprise, and it is slow to start after login.  I tried to boot in minimum mode, System Restore, uninstalled my antivirus software, uninstall my printer, netsh winsock reset.  Any help will be greatly appreciated.

  Since it is a copy of Windows 7 business, you really need to contact the campus administrator or post in the TechNet forums found here:

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

  Sorry we can't be more helpful!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion 140 550 - t: unable to connect to the windows service

  Not sure if it's the good advice of post, but here goes.

  Just got the HP computer yesterday and installed Norton Security, Malwarebytes, and Windows Live Mail (do not like the version of Mail). Now, when I start it, I get "Unable to connect to the Windows Service" pop up and WLM crashes when I try to open it. What the DEVIL?

  Had the same problem on the one I just replaced. My laptop became the 'Group Policy' error thing, but I think I fixed it.

  Any suggestions? Windows is a joke!

  If it is Norton Security, then it's a firewall as well and firewalls blocking things, it's that they are supposed to do. So demand for three, you said that this is probably the cause.

  But if you do not want to test it, then try the system restore I've mentioned or reload the image origin, then just put in place the email again and see if it works without the other two installed, first to see if it will work with anything else in the picture.

• Unable to connect to a Windows Service on Windows 7

  Today, I restarted my computer, because it's been a few days I only left in hibernation. Everything is fine but when I connect it gives me the following msg:

  "Unable to connect to a windows service. 
  Windows could not connect to the system event
  Service notification service. This problem prevents
  standard users to log on to the system.
  As an administrator, you can review the system
  Event log to see why the service has no
  answer ".

  I am running windows 7 Ultimate and I have never had this problem before and now my office gives this appearance: it looks like a mix between xp and safe mode.

  

  Have tried to restart the computer several times, System Restore won't answer, "netsh winsock reset", the "user profile Service' and"System Event Notification Service"is started and set to automatic.

  I don't really know what else to do, can anyone help?

  Not an expert on computers, just a heads-up.

  Thanks in advance for the help.

  Running Windows 7 ultimate 64 - bit OS

  Arroyo V. salvation,

  This error can be caused if the service has stopped working.

  I suggest you follow the advice given by Vinod N responded on May 9, 2013 in the following link and check.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/i-am-getting-the-message-failed-to-connect-to-a/7267b4f8-50ef-4C46-A415-aa5076c0e332

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  Please answer us on the State of the question to help you further.

• Satellite P200 - failed to connect to the Windows Services

  After starting Windows Vista on my Satellite P200, I received a message: failed to connect to any Windows Services.The event notification system file are not available.
  Use restricted to the mode of administration.

  No network supports either (wifi, Ethernet,...). At least I can use the PC in batch mode!
  Unable to retrieve a previous saved file system.

  I need to restore my Toshiba restore disk Win Vista?

  Do you offer a lighter solution?

  It's strange, but what you mean with batch mode?
  You can start in safe mode?

  I think the best way is to reinstall Windows with the recovery disk. It only takes a few minutes and then you have the new installation of Windows with all the drivers and tools of Toshiba.

• Problem to create the Internet connection sharing between Windows XP and Windows Vista.

  Original title: Internet connection sharing between Windows XP and Windows Vista.

  Hello

  Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

  Thank you

  FG-man

  I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

  Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

  If you go this route, you need to set a static ip address for the office,

  Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

  Hope that this helped good luck

• System Event Notification service - cannot connect to a Windows Service. Windows could not connect to the System Event Notification service

  I am unable to connect to my network wireless with my laptop Sony, (Vista home premium). This follows an infection in my desktop PC with a Trojan which did not stop, but slow internet browsing. I reinstalled vista windows on the pc and it works fine now bur my still gives mobile me this message. "Unable to connect to a Windows Service. Windows could not connect to the System Event Notification service. This problem prevents limited users to logon to the system. As an administrator, you can view the system event log to see why the service did not respond. "I am the administrator on my pc and laptop. I tried to change the user nothing helps. I use Vista Home Premium Service Pack 1. Intel Core 2Duo T7250 2 GHz. 2 GB of RAM. 32-bit. Sony Vaio FZ31M. If you can give me instructions on how to remedy the situation, it would be appreciated. Thank you, Tony

  Hi 1234Tony,

  First of all, I suggest you that you also scan your laptop for infection by the virus. Second, reset TCP/IP stack Winsock settings. This could correct mistakes involving internet connectivity as a result of problems of installation of network software, due to a virus, trojan or malware infection or even due to disinfection of spyware security software.

  To repair and put back the Windows Vista

  1. Click the Start button.
  2. Type Cmd in start it the search text box.
  3. Press Ctrl-Shift-Enter keyboard shortcut to run command as administrator prompt. Allow elevation request.
  4. Type netsh winsock reset in the command line shell, and then press the Enter key.
  5. Restart the computer

     If please reply and let us know if your problem is resolved or if you need further assistance

  David O
  Microsoft Answers Support Engineer
  Visit our and tell us what you think.

• Unable to connect to a windows service

  Hello

  I work in a school and we have two vista computers in our lab that display the "Cannot connect to a windows service" message and will not allow administrators to connect.

  I tried "netsh winsock reset" but this does not solve the problem.  I am also unable to run "System Restore", as it is there before the dates of restoration that are avilable.

  Can anyone help?

  Thanks, Floic

  The full message is:

  "Windows does not have to connect to the Group Policy Client service." This problem prevents limited users to logon to the system.  As user administrator, you can view the system event log to find out why the service has failed"

  Hello EilishR,

  The question you have posted is related to computing on a network server and would be better suited to the Microsoft TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/category/MicrosoftOnlineServices
  Thank you!

• Vista problem: "failed to connect to the windows service, Windows cannot connect to the system event.

  I have reported this problem on my PC at home that connects to the internet. My laptop runs Vista Home Premium and I can't connect to the internet. I took my laptop on a trip, tried to connect to the wireless network that was free to the place we are. Could not connect, and after this initial test, the following is displayed after the start of "failed to connect to the Windows Service, Windows cannot connect to the system event notification service. This problem prevents limited users to logon to the system. As administratvie user, you can view the system event log to see why the service did not respond. "(have no idea how or what it means) when I go to the task bar you want to connect to a network, it is said:" the dependency service or group could not start"and if I go ahead and press"connect to a network"it says it can't find.  I search for computers on the network (who I'm sitting next to) and then try to diagnose the problem and it cannot. I have limited knowledge of this type of problem. Anyone have this problem and how to fix it?

  Hi ptkein,

  Thanks for posting your question on the Forums of Windows Vista.

  Option 1: You can download and install the latest network card drivers and see if that can solve the problem.

  Option 2: Follow the link below to fix network connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems

  Option 3: Follow the link below to solve Internet connection problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

  Option 4: To verify if a third party application is a cause, follow this link (http://windows.microsoft.com/en-us/windows-vista/Advanced-startup-options-including-safe-mode) for this boot to the desktop using the safe mode with networking option and try to install the network. If the problem is resolved, you will need to perform a clean boot by following the steps in the following article to refine the exact source and isolate it: http://support.microsoft.com/kb/929135

  Let me know if it worked.

  Hope it will be useful.

  Thank you and best regards,

  Kadoch - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Try to install the update for win 7 error code windows service install could not be accessed

  I can't indtall a program

  Try to install the update for win 7 error code windows service install could not be accessed.  Insatller Windows is not installed correctly.

  Try to make sure that the Windows Installer service is running, or force start it.

  1 open run and type services.msc, and then press ENTER. You can also go
  to the Panel of control-> Administrator Tools-> Services.

  2. in the installation list services, locate Windows Installer.

  3. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.

  4. If you get the error trying to force starts the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  You can also give the following a try, make sure that you back up your Windows registry database before you try:

  7 How do I backup the registry in Windows

  http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx Change of the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.