Connection failed for an unknown reason (IOM Java Client)

Similar Questions

• X 3500 HNAP call to the device failed for an unknown reason.

  During the installation process Cisco Connect X 3500 briefly to connect to internet (can surf the net very briefly in this window) but when he arrives at the end of the installation it saying unsuccessful then restarts.  Is there a way to manually connect just using the address IP is a browser?

  Error code: 82BD0305

  Error description: year HNAP call to the device failed for an unknown reason.

  Model name: loading...

  Model number: X 3500

  Serial number: unknown

  Firmware version: loading...

  Operating system: Windows 7 SP 1

  Software version: 1.4.12340.0

  Connection type (WAN): loading...

  (LAN) IP address: loading...

  (WAN) IP address: loading...

  The computer IP address: 192.168.1.103

  Found!  At the bottom of the Cisco Connect program window is a link to configure manually via a web browser.

• Checking the connection failed for the source of data on port 1433

  Try to set up a DSN for a database of SQL Server on a new computer and it fails every time.

  Connection verification failed for data source: csf

  java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  The root cause was that: java.sql.SQLNonTransientConnectionException: error [Macromedia] [SQLServer JDBC Driver] establishing socket to host and port: SANDYPC:1433. Reason: Connection refused: connect

  Now, when I installed the CF 11, it is installed on port 8500.  However, when I try to change the port in the configuration to 8500, I get this error:

  • Connection verification failed for data source: csf
    java.sql.SQLException: timed out trying to establish connection
    The root cause was that: java.sql.SQLException: timed out trying to establish connection

  I can't find anything online about how to solve this problem!  Help!

  Hello

  Is that SQL Express edition? If so maybe TCP protocol is not enabled. Windows Firewall is enabled? Check port 1433 is open.

  Normally you would not create a data source to the apache 8500 port, which is a web server not Database not the port of the server.

  HTH, Carl.

• Error: "no restore points could be created for an unknown reason."

  original title: inoperable. Windows Vista system restore

  My system recovery, restore cannot create any requested restore point after that execution and by completing the order followed with pop - up box describing that no restore point could not be created for some unknown reason.  Help, please!

  Hello

  1. you are making a system image backup or you try to run the system recovery options system restore?

  2 are you try to create a restore point manually?

  3. at what stage you receive the error message?

• Secure connection failed for Nginx + Comodo PossitiveSSL while SSLlabs Score is A +.

  I own the Web site https://vzinity.com that runs on Nginx and uses a Comodo PossitiveSSL cert.

  I tested the installation of SSL to https://www.ssllabs.com/ssltest/analyze.html?d=vzinity.com and it gets a grade of A +.

  I tried opening the site with many browsers, but I don't see this problem in Firefox. When I visit the website using Firefox 39 (Windows 7, Windows 8.1, 10 Windows and Linux Mint) I get the following error:

  The secure connection failed

  The connection to vzinity.com while the page is loading.

     The page you are trying to view cannot be shown because the authenticity of the received data could not be verified.
     Please contact the website owners to inform them of this problem.
  

  Any help will be appreciated.

  Thank you.

  That looks like a problem with bad sniffing user agent.

  It works for me if I change date 20100101 in Gecko/20100101 in on user agent (same Gecko/20100102 works, only Gecko/20100101 does not work).

  • Mozilla/5.0 (X 11; Linux i686; RV:39.0) Gecko/Firefox/39.0 39.0

  The server could be hacked to target only a Firefox user agent.
  You can contact the Web site and ask them to look into this.

• connection failed for esis

  Hello, I am triing to connect you to esis for my school for girls, it's a way for me to check his notes and all missing assignments. It should also access so she can check her grades and assignments. I turned off my blockers and cookies. Still no luck. I get connection failed. I can connect to other places simply not my house, by phone or cushion of Galaxy.  Can anyone help?

  Good first what browser you are using, for example, Internet Explorer, Google Chrome. ?

• L2TP/IPSec connection failed for Windows 7 Ultimate for Windows Server R2 2012 with error 789.

  For this preface, I use the server in a lab environment and trying to set up my own VPN L2TP/IPSec. I opened the UDP 500 and 1701 TCP ports on my router for the interface of the primary server where is the VPN. It is on a Comcast connection consumer where other applications such as Arma 3 servers dedicated and IIS have worked.
  The RRAS role to run based on this tutorial: http://www.thomasmaurer.ch/2014/01/how-to-install-vpn-on-windows-server-2012-r2/ I have only strayed from it using DHCP forwarding instead of a static pool of IP as my router is running a DHCP server, and if I understand correctly, the router must give IP addresses of the internal IP pool which I use for everything else. I also use the PSK authentication rather than be based certificate. For the authentication of users I have MS-CHAP-V2 and CHAP enabled; I connect from the remote device with an account on that I created on the server for the purpose of this VPN I know RRAS connections are allowed.

  When the connection I get error 789: L2TP connection attempt failed because the security layer detected a processing error during initial negotiations with the remote computer. From what I've seen, this can be fixed by checking that the two ends of the connection are not behind a NAT (not an option), verification of the PSK (already done) and certificates (not applicable). If there is a way to solve this problem that would be great, but my server will always be behind a NAT firewall because the router is one, and the modem becomes one if several devices are connected to him without a router between the two.

  
  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• News of connection fails for the new installation of Windows 7

  I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.

  I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.

  I just got a Lenovo Thinkcentre this morning and I carefully walked the first windows to connect. I put my password and checked every box because there is no way to see when I put. I put in an indication of password. I continued and continues. After going through the rest of windows, I got on the desk, and applied Windows updates. When it was finished, I rebooted the computer.

  I can not connect to the computer using the information I carefully typed in at the beginning. This is the second time that this is happening so I know I've been very careful. I was unable to save the last computer and I wrote something wrong chalked it up to me, so I reformatted it. What could go wrong? I tried "Admin" as user name and I tried I got in the beginning of the name of the computer.

  Try to reinstall Windows and configure the account again, and after reaching the office, create a backup account.

  In addition, for security reasons, enable the administrator account.

  Reinstall Windows 7:

  Using the recovery partition to reinstall Windows 7

  Step 1

  Restart the ThinkCentre and repeatedly press the "F11" key like start the computer to the top.

  Step 2

  Watch a message on reboot telling you press F11 to access the product recovery program. Quickly, press the "F11" key when you see the message. If you do not see the message, you do not have a recovery partition on your hard drive and must instead use recovery discs. Once you enter the recovery mode, either by pressing 'F11' or booting from a recovery disk, the ThinkCentre shows main recovery screen.

  Step 3

  Follow the prompts to choose your recovery options. Use the settings by default unless you want to customize the recovery. You can choose options such as full recovery ',' "Content factory" or "Restore my hard drive to the original state of the plant," according to the particular ThinkCentre model.

  Step 4

  Insert new disks when you are prompted if you restore DVDs.

  Step 5

  Click 'Yes' when prompted to restart the computer. From this point, the recovery process is completely automatic. Your computer restarts several times, and the whole process takes sseveral minutes or more. Once installation is complete, Windows displays the configuration for a new user screen, as if the computer comes out of the box.

  Step 6

  Complete the installation of Windows by entering in your language, regional settings, network settings and the Windows user name. You may also enter your Windows product key, which is on the DVD provided with the system, or on a sticker on the computer.

  --------------------------

  If this does not work, contact technical support

  replacement of http://www-307.IBM.com/PC/support/site.WSS/homeLenovo.do and demand

  Create an extra account:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Activate the administrator account:

  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

• VIX 1.6.2 and ESXi 3.5.0: connection drops for no apparent reason

  I used vix to drive a virtual machine hosted by workstation, but I update this code (c#), to drive a virtual machine hosted by ESXi.

  I have a lot of problems with the connection to the abandonment. I set up a ping t on ESXi box and on the virtual machine I want to drive, and that shows a consistent link. However, I find the following:

  • If I call Connect successfully and then add a call to Open, on a regular basis, the call will fail with VIX_E_HOST_NOT_CONNECTED. I put the Connect and Open calls in a loop to try again with a break of 20 seconds between each attempt. After 3 or 4 attempts it usually connects.

  • If my program does a job without talking to the VM for about a minute, the connection drops usually such that if I try to call RunProgramInGuest after use the Vix api for a minute, it fails with "not connected". I put in a call to try again 'connection' before running a program on the virtual machine. Failure, I run the connection and open the loop to try one more time and then question the RunProgramInGuest call, I wanted to once again and it works.

  • However, I'm stuck, if I call RunProgramInGuest and then wait on the handle of the job, he is generally ok unless in the guest takes more than a minute or so to run. In this case returns never wait and the program is blocked.

  Anyone who knows the connection drop like that? What solution did you use to solve the final problem. I considered trying to exceed a reminder in, but the wait is failing, I expect that a reminder be never called back either. The other option I'm considering is that every time I call RunProgramInGuest, I actually run a script on the computer virtual who runs the program, then writes a file. So I can query reconnect, reopen and reconsignation-in in a loop to try again, and a quick turnaround program that looks like the existence of the file that tells me the program finished. It sounds crazy, so I hope that there are better suggestions!

  Any suggestions would be greatly appreciated.

  -Scott

  -

  ---

  In addition, if the guys from VMWare VIX watch this group discussion. Here are two suggestions: If you want a badge of the ViX API in the top level, the logic of reconnection must be internal. In addition, a native managed API which requires no installation of COM stuff would be very welcome.

  I suppose that you keep reopening a connection and garbage collection operation, it destroyed in a random delay. That's why you see inconsistent results. I suggest you to take VMWareTasks and rewrite the code that you do without anything resembling a retry. It should "work".

• MacBook loses the Internet connection often for no apparent reason

  Year old MacBook Air loses connection Internet (cable modem) almost every day, in my house and other places where the connection is wireless.  I have an appointment in the preferences system, network and cross the help me / diagnostic process and after all of the steps, he said the connection seems to work, and when you do that, it is.  This does not happen with my old iMac that often turns at the same time.

  If "old year" almost means "one year", then I strongly suggest that you take it to a Genius Bar for the hardware test before the expiration of the warranty.

• ATV 4 turn on automatically, and all connected equipment, for no apparent reason

  I have my 4 ATV implemented to control my overall TV/sound system. Works very well.

  However, this morning I woke up to find my TV system on. I think that the ATV may have done, because a similar problem was reported in MacInTouch a couple of months. Many thought that turn on AirPlay from anywhere in the home caused this. However, I thought it was fixed by a recent software update.

  Has anyone else had a similar problem? If so, what do you have on this?

  This will happen when the network activity is detected

• I lost all my documents when I tried to erase my trash.  For some unknown reason, this for me.  I need help

  I have a Mac Air with the X 10 of IOS.  I was cleaning my files and create new files.  When I finished I wanted to clear my trash and to my sorprise all my documents have been lost.  I haver tried using restore but not able to do.  I have iphone 6s and a Mac computer.  Please help me.

  The correct action to take about lost documents would be to restore from a backup that is equivalent or time Machine.

  I was cleaning up my files...

  Please explain what you did and what you used to do.

• Connection verification failed for data source - mysql.jdbc.Driver

  I get this message when you try to add a mySQL (don't ask) database in CF Admin checking the connection failed for data source: shownets java.sql.SQLException: no suitable driver available for shownets, please don't check the configuration in the file resources, pilot error: com.mysql.jdbc.Driver

  
  The root cause was that: java.sql.SQLException: no suitable driver available for shownets, please don't check the configuration in the file resources, pilot error: com.mysql.jdbc.Driver I tried all sorts of messages instructions and nothing seems to work.  It's on my 32-bit platform. Tryng to get out all the bugs before I installed the 64-bit version.
  
  TNX a

  It seems that you have recently installed Coldfusion. I say this because recent versions of Coldfusion no longer ships with JDBC to MySQL driver. You must therefore download and install it yourself.

  To do this, go to the download page of the MySQL JDBC driver. Select the platform independent as a platform connector. Download the ZIP file independent of the platform mysql-connector-java - x.x.xx.zip. (x.x.xx represents the version number)

  Extract the ZIP file. Open the folder that results and search for the driver. It is a JAR file called mysql-connector-java - x.x.xx - bin.jar (x.x.xx represents the version number). Copy the file in the directory lib to Coldfusion.

  Restart Coldfusion. Voila - you're ready to go.

• Windows Error Reporting service connection failed

  For some unknown reason to me, the Windows Error Reporting service has decided that it cannot send crash reports to Microsoft.

  

  I get the above error when I try to "Find a solution" review problem reports dialog. 'Try again later' does not work. I've tried several "recommended fixes' including digitization of system files corrupted, by ensuring that the WER service is running, and check firewall issues. Reports of incidents used to work, so I'm at a loss as to why this is happening. Can someone shed light on the possible cause?

  Hi BaradaNikto,

  Thanks for the reply.

  Before you repair your operating system, you can purge all existing reports by using the disk cleanup utility, and then see if you get the error.

  For the instructions, you can consult this article. Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  If this is not enough, please answer with the information asked Gerry C J Cornell , which will help us to solve the problem.

• DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Im very new to Oracle DRM and Im trying to get the configuration of the application on the Windows Server that is running SQL Server 2008.  When I try to connect to the Web Client I get this error.

  DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Can you please help

  The problem is solved, reinstalled DRM and recreated the repository. the password has a symbol that causes the problem, @.