Connection from gateway to gateway RV042

We have 2 Rv042, one in my office and the other in my home... office, we have IP static and at home No... question is can I connect the two RV042?

Hello.

These products are processed by the Cisco Small Business Support Community.

* If my post answered your question, please mark it as "acceptable Solution".

* Do not forget to give a 'congratulations '. Thank you!

Tags: Linksys Routers

Similar Questions

  • When you try to connect from my vista desktop to my laptop windows 7 through the DRC I get the error "unable to connect to the gateway terminal server."

    problems of the DRC of vista for windows machine 7

    I have 2 computers running on a homegroup. When you try to connect from my vista desktop to my laptop windows 7 through the DRC, I get the error "unable to connect to the gateway terminal server."   Can I remotely from the laptop to the desktop vista end. I the DRC 7 is installed on the desktop and tried to connect using the IP as well as the name of the machine but still no joy.

    can someone shed light on this please?

    Hello

    Temporarily disable the security software on both computers and check if it makes a difference.

    http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

    Note: Antivirus software can help protect your computer against viruses and other security threats.  In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  • connect a gateway 2wire (2701HG) to my computer. Different network cards can run on the same network?

    I tried to connect a gateway 2wire modem to my computer.  Unfortunately, I didn't remove the old external modem before I installed a new.  Now, my internet connection is slow and sporadic, sometimes and locks my computer.  Is there anything I can do to fix this.  I tried to delete the old network card, but copies of Windows Vista it back when I restart my computer.  Help!

    Hi jrsenator,

    Please see the questions that Bindu R asked to help us identify the problem:

    Ø how configured for modem to the computer?

    The old O modem is still connected to your computer?

    Ø how you connect to the internet explore using the new modem?

    In addition, please see the link below, with some good information about setting up a home network:

    http://Windows.Microsoft.com/en-us/Windows-Vista/setting-up-a-home-network

    I hope this helps! Debra
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

  • Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

    Hi someone help please I am signing the apple tv correctly and it says the password for itunes that is incorrect. However, I am now connected from my computer and it is OK

    Have you tried to reboot your router, correct your location settings, you use audit stage 2.

  • Why is-36 of Firefox on Windows receiving connections from DNS servers? Option network.dns.get - ttl

    Following update Firefox 36, my firewall was flooding asking me to allow external connections from the Internet to my browser. Looking at it more closely, Comodo Firewall indicates that external websites are trying to connect to Firefox, port 53 to an arbitrary port on my machine.

    If I disable the option FF36 new network.dns.get - ttl, it stops. I can't find any documentation or help on this option.

    Why Firefox do this? Is Comodo incorrect when he labels it as an external connection attempt? (It has normally been extremely good to differentiate the incoming and outgoing traffic). I guess that Firefox is trying to determine the TTL for DNS caching, but it is not make sense why DNS servers then try to connect to me.

    I am reluctant to create a firewall rule to that arbitrary Internet connections on my machine are OK as long as their origin on port 53, tips on how to manage all that this new feature is firmly States would be appreciated.

    Thanks in advance for any help.

    Hi grammarye,

    Yes, you're right in thinking that Firefox is trying to find the TTL value. This is new in Firefox 36 behavior and was presented as services frequently changing DNS records (such as Cloudflare) were not working properly for Firefox users.

    Firefox makes asynchronous DNS searches - which means it will make a DNS query and then proceed to perform another task instead of waiting for an answer.

    Your ISP DNS server puts in cache only TTL an area for a short time, so if it does not the current LIFE expectancy, he will interview with other DNS servers to find.

    IANAE, but probably what is happening is:

    1. Firefox tries to find the DNS record for the domain that you want to connect to
    2. Your ISP DNS server does not have the current LIFE expectancy, then connects with other DNS servers to find
    3. During this time, Firefox lingers with something else
    4. DNS server, then reconnects to give you full DNS, including the TTL check
    5. Comodo sees the packets of the DNS server and panic

    I completely agree that arbitrary ports of white list is a bad idea, but in this case, the behavior is completely harmless.

    You can want to whitelist Firefox in your Comodo Firewall, or continue to let network.dns.get - disabled ttl.

    (edited to fix broken links and add a sentence)

  • How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

    I NEED TO ACCESS MY BRPWSER ON DESKTOP FROM ANYWHERE IN THE WORLD... LIKE GMAIL...

    How to customize my mozilla like gmail. (connection from any PC in the browser to get all my saved favorites)

    (Personal information removed by the moderator. Please read the Forum rules and guidelines - m)

    Sorry, that Mozilla does not offer a feature like that.

    Check out Xmarks. http://www.Xmarks.com/about/features/overview

  • servermgr validation of connection from 0: 100000

    Hello.

    Get flooded with messages in my journal... Everything works well, as far as I can tell. Just curious as to what these means.

    We had some DNS problems, but they all seems to be resolved and all services are running in the event of a problem.

    Thanks for all the ideas.

    OSX Yosemite

    Server 5 latest version

    2015-12-25 10:02:01, 550 serveradmin [95773]: connected to the notification Service

    2015-12-25 10:02:01, 551 servermgr_accounts [95601]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 565 serveradmin [95774]: connected to the notification Service

    2015-12-25 10:02:01, 567 servermgr_accounts [95601]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 568 servermgr_accounts [95601]: connected to the notification Service

    2015-12-25 10:02:01, 591 serveradmin [95775]: connected to the notification Service

    2015-12-25 10:02:01, 592 servermgr_afp [95604]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 608 serveradmin [95776]: connected to the notification Service

    2015-12-25 10:02:01, 609 servermgr_afp [95604]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 611 servermgr_afp [95604]: connected to the notification Service

    2015-12-25 10:02:01, 630 serveradmin [95777]: connected to the notification Service

    2015-12-25 10:02:01, 631 servermgr_caching [95606]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 647 serveradmin [95778]: connected to the notification Service

    2015-12-25 10:02:01, 648 servermgr_caching [95606]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 658 servermgr_caching [95606]: connected to the notification Service

    2015-12-25 10:02:01, 678 serveradmin [95779]: connected to the notification Service

    2015-12-25 10:02:01, 680 servermgr_devicemgr [10315]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 698 serveradmin [95780]: connected to the notification Service

    2015-12-25 10:02:01, 699 servermgr_devicemgr [10315]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 721 serveradmin [95781]: connected to the notification Service

    2015-12-25 10:02:01, 722 servermgr_dirserv [95609]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 926 serveradmin [95793]: connected to the notification Service

    2015-12-25 10:02:01, 927 servermgr_dirserv [95609]: validate the connection from 0: 100000

    2015-12-25 10:02:01, servermgr_dirserv 929 [95609]: connected to the notification Service

    2015-12-25 10:02:01, 948 serveradmin [95794]: connected to the notification Service

    2015-12-25 10:02:01, 949 servermgr_dns [95622]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 966 serveradmin [95795]: connected to the notification Service

    2015-12-25 10:02:01, 968 servermgr_dns [95622]: validate the connection from 0: 100000

    2015-12-25 10:02:01, 969 servermgr_dns [95622]: connected to the notification Service

    2015-12-25 10:02:01, 989 serveradmin [95796]: connected to the notification Service

    2015-12-25 10:02:01, servermgr_ftp 990 [95624]: validate the connection from 0: 100000

    2015-12-25 10:02:02, 005 serveradmin [95797]: connected to the notification Service

    2015-12-25 10:02:02, servermgr_ftp 007 [95624]: validate the connection from 0: 100000

    2015-12-25 10:02:02, 017 servermgr_ftp [95624]: connected to the notification Service

    2015-12-25 10:02:02, 036 serveradmin [95798]: connected to the notification Service

    2015-12-25 10:02:02: servermgr_info 037 [95626]: validate the connection from 0: 100000

    2015-12-25 10:02:02, 058 serveradmin [95799]: connected to the notification Service

    2015-12-25 10:02:02, servermgr_info 059 [95626]: validate the connection from 0: 100000

    2015-12-25 10:02:02, 060 servermgr_certs [10138]: validate the connection from 0: 100000

    2015-12-25 10:02:02, 291 serveradmin [95800]: connected to the notification Service

    2015-12-25 10:02:02, servermgr_jabber 293 [95628]: validate the connection from 0: 100000

    2015-12-25 10:02:02, 328 serveradmin [95802]: connected to the notification Service

    2015-12-25 10:02:02, 329 servermgr_jabber [95628]: validate the connection from 0: 100000

    2015-12-25 10:02:02, servermgr_jabber 359 [95628]: connected to the notification Service

    2015-12-25 10:02:02, 382 serveradmin [95804]: connected to the notification Service

    2015-12-25 10:02:02, 383 servermgr_network [95632]: validate the connection from 0: 100000

    2015-12-25 10:02:02, 408 serveradmin [95805]: connected to the notification Service

    2015-12-25 10:02:02: servermgr_network 409 [95632]: validate the connection from 0: 100000

    2015-12-25 10:02:03: servermgr_network 549 [95632]: connected to the notification Service

    2015-12-25 10:02:03, 571 serveradmin [95806]: connected to the notification Service

    2015-12-25 10:02:03, 573 servermgr_nfs [95634]: validate the connection from 0: 100000

    2015-12-25 10:02:03, 588 serveradmin [95807]: connected to the notification Service

    2015-12-25 10:02:03, 589 servermgr_nfs [95634]: validate the connection from 0: 100000

    2015-12-25 10:02:03, 618 servermgr_nfs [95634]: connected to the notification Service

    2015-12-25 10:02:03, 639 serveradmin [95809]: connected to the notification Service

    2015-12-25 10:02:03, 640 servermgr_radius [95637]: validate the connection from 0: 100000

    2015-12-25 10:02:03, 733 serveradmin [95813]: connected to the notification Service

    2015-12-25 10:02:03, 735 servermgr_radius [95637]: validate the connection from 0: 100000

    2015-12-25 10:02:03, 737 servermgr_radius [95637]: connected to the notification Service

    2015-12-25 10:02:03, 756 serveradmin [95814]: connected to the notification Service

    2015-12-25 10:02:03, 758 servermgr_san [95650]: validate the connection from 0: 100000

    2015-12-25 10:02:03, 772 serveradmin [95815]: connected to the notification Service

    2015-12-25 10:02:03: servermgr_san 773 [95650]: validate the connection from 0: 100000

    2015-12-25 10:02:03, 774 servermgr_san [95650]: connected to the notification Service

    2015-12-25 10:02:03, 795 serveradmin [95816]: connected to the notification Service

    2015-12-25 10:02:03, 796 servermgr_sharing [95652]: validate the connection from 0: 100000

    2015-12-25 10:02:03, 817 serveradmin [95817]: connected to the notification Service

    2015-12-25 10:02:03, 818 servermgr_sharing [95652]: validate the connection from 0: 100000

    2015-12-25 10:02:03, 828 servermgr_sharing [95652]: connected to the notification Service

    2015-12-25 10:02:03, 847 serveradmin [95818]: connected to the notification Service

    2015-12-25 10:02:03, 848 servermgr_smb [95654]: 0 connection validation: 100000

    2015-12-25 10:02:03, 863 serveradmin [95819]: connected to the notification Service

    2015-12-25 10:02:03, 865 servermgr_smb [95654]: 0 connection validation: 100000

    2015-12-25 10:02:03, 865 servermgr_smb [95654]: connected to the notification Service

    2015-12-25 10:02:03, 885 serveradmin [95820]: connected to the notification Service

    2015-12-25 10:02:03, 886 servermgr_swupdate [95656]: 0 connection validation: 100000

    I get them as well on a clean installed El Capitan + OS X Server (10.11.2 + 5.0.15) system.

    Dec 28 09:16:44 servermgr_wiki Server [16649]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_web Server [16698]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_swupdate Server [16697]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_devicemgr Server [16696]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_jabber Server [16699]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_san Server [16778]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_mail Server [362]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_dirserv Server [16779]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_documents Server [16780]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_radius Server [16781]: validate the connection from 0: 100000

    Dec 28 09:16:44 servermgr_vpn Server [16782]: validate the connection from 0: 100000

    Dec 28 09:17 serveradmin Server [16795]: connected to the notification Service

    Dec 28 09:17 Server servermgr_mail [362]: validate the connection from 0: 100000

    Dec 28 09:17:48 certadmin Server [16843]: connected to the notification Service

    Dec 28 09:17:48 servermgr_certs Server [16642]: validate the connection from 0: 100000

    The server has been very carefully the correct installation with very attentive to the DNS, etc. of valid certificates. Since the install I have reviewed all the settings and looking at the newspapers. I did all the services - not wiki, web, Messaging [jabber], san - active, but it seems to have them running and talk with the Server Manager.

    My server is running OK with services I active, so I hope it's just cruft.

  • How can I change my internet connection from wireless to wired

    Desktop HP Pavilion HPE h8-1017

    Windows 7 Home Premium 64 bit OS

    How can I change my internet connection from wireless to wired?

    Hello

    You already have a wired connection to your home? Very simple, just using a CAT5e or CAT6 cable and connect to a LAN port of the modem or router to port #2 (at the back) until you and your machine will:

    Kind regards.

  • How can I connect from a PC to another PC using LabVIEW

    New IAM for LabVIEW and need help. How can I connect from a PC to another PC using LabVIEW. IE how to connect to the IP of the PC, another address using LabVIEW. Thanking you.

    There are a few methods of network communications in LabVIEW.

    Some of them, in no particular order:

    -Network shared Variables

    -Flow network

    -Screw HTTP and Web Services client

    -TCP

    -UDP

    (There are also libraries of pre-written e-mail based on UDP/TCP)

    Which the decision to go for depends on many factors (e.g. should you read the last value of variables, flow without any loss of data, data dissemination or send messages/packets of data, etc.). I suggest take you a look at some examples in the finder of the example (help-> find examples...). If you are really new to LabVIEW, I suggest you take some free LabVIEW tutorials - take a look at the links at the bottom of the first post in this thread.

  • Remote Desktop issues connecting from home to work the computer in Windows XP. Remote Desktop stops responding and eventually disconnects.

    Just around the beginning of July (2011) I started to have remote Office questions when connecting from home to work. If I minimize the connection for a while and come back later, it will be often does not. I'll have to hit the close X button several times before, he ends by abruptly disconnects. By the sudden I want to say that I don't get no dialogue usual warning that the session will be disconnected.

    Also, sometimes when I connect I get a white screen instead of a connection window.

    Anyone know if there was a Windows Update, or anything that can cause problems with RDP.

    I used to be able to connect perfectly without any problems.

    Thank you

    original title: Remote Desktop problems for the months spent on XP

    Hello

    Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the below link: http://social.technet.microsoft.com/Forums/en-US/itproxpsp/threads

  • Error: The period elapsed prior to obtaining a connection from the pool in the Windows XP computer.

    Original title: timeout expired.

    I get this question: timeout expired. The period elapsed prior to obtaining a connection from the pool. This can happen because all pooled connections were used and the maximum pool size has been reached.

    It's my code and the problem is maybe the part highlighted.
    Dr. MySqlDataReader = null;
    Try
    {
                    MySqlParameter [] param = New MySqlParameter [] {}
    New MySqlParameter("?_MaxTries",MaxTries)};
    Dr = MySqlHelper.ExecuteReader (ConnectionString, "call ssp_EscalationMails)
    ? _MaxTries) "(, param);"
    List emailList As new List();
    EMailInfo objEmailInfo;
    While (Dr. Read
    {
    objEmailInfo = new EMailInfo();
    objEmailInfo.ID is Dr.. GetInt64 ("EmailToFire_ID");
    objEmailInfo.To is Dr.. GetString ("To");
    objEmailInfo.From is Dr.. GetString ("From");
    objEmailInfo.Subject is Dr.. GetString ("Subject");
    objEmailInfo.Body is Dr.. GetString ("Body");
    objEmailInfo.CC is Dr.. GetString ("CC"); CC is null in DB
    objEmailInfo.Tries is Dr.. GetInt16 ("Tries");
    objEmailInfo.Sent = 0;
    emailList.Add (objEmailInfo);
    objEmailInfo = null;
    }
    SmtpClient smtpClient = new SmtpClient();
    smtpClient.Host = SmtpHost;
    foreach (objMail in emailList EMailInfo)
    {
    Try
    {
    MailMessage mailMessage = new MailMessage();
    mailMessage.To.Add (objMail.To);
    mailMessage.From = new MailAddress (objMail.From);
    mailMessage.Subject objMail.Subject =;
    mailMessage.Body objMail.Body =;
    mailMessage.IsBodyHtml = true;
    mailMessage.Priority = MailPriority.High;
    objMail.Tries += 1;
    smtpClient.Send (mailMessage);
    objMail.Sent = 1;
    mailMessage = null;
    }
    catch (System.Exception e)
    {
    string message = "shooting unique Email.
    + System.Environment.NewLine + e.get_Message () + ":" + Convert.ToString (e.InnerException) + System.Environment.NewLine + "EmailToFire_ID:"+ ".
    objMail.ID + System.Environment.NewLine +.
    "------------------------------------------------------------" +
    System.Environment.NewLine;
    Logger.LogMessage (message);
    }
    MySqlParameter [] uspparams = new MySqlParameter [] {}
    New MySqlParameter("?_EmailToFire_ID",objMail.ID),
    New MySqlParameter("?_Tries",objMail.Tries),
    New MySqlParameter("?_Sent",objMail.Sent)
    };
    MySqlHelper.ExecuteNonQuery (ConnectionString, "call usp_EscalationMails(?_EmailToFire_ID,)
    ? _Tries? _Sent) "(, uspparams);"
    }
    }
    catch (System.Exception e)
    {
    string message = "FireEmails()."
    + System.Environment.NewLine + e.get_Message () + ":" + Convert.ToString (e.InnerException) + System.Environment.NewLine + "-" +.
    System.Environment.NewLine;
    Logger.LogMessage (message);
    }

    Thank you very much

    Hi Swatikurra,

    The question you posted would be better suited in the MSDN forums. I would recommend posting your query in the MSDN forums:

    http://social.msdn.Microsoft.com/forums/en-us/categories

    Hope the helps of information.

  • Client VPN blocks inbound connections from remote desktop?

    I am running Vista x 64. To connect to a VPN Windows via the built-in VPN client works except that it seems that all incoming connections from the local network (including remote desktop) are blocked.

    Is this a known problem or design? It is a problem for us because the computer that is running the VPN client is a virtual machine running in hyper-v, so accessible by users via remote desktop - only connection to the console of the hyper-v Server is not an option.

    Are there alternatives?

    I am running Vista x 64. To connect to a VPN Windows via the built-in VPN client works except that it seems that all incoming connections from the local network (including remote desktop) are blocked.

    Is this a known problem or design? It is a problem for us because the computer that is running the VPN client is a virtual machine running in hyper-v, so accessible by users via remote desktop - only connection to the console of the hyper-v Server is not an option.

    Are there alternatives?

    It sounds like the question to split the tunnel . On the VPN client you can enable/disable split tunneling. See this article for help with that.

    http://TechNet.Microsoft.com/en-us/library/bb878117.aspx

    Note the security ramifications...

    In addition, I can not comment on this issue and a virtual machine, so as always YMMV...
    MS - MVP Windows Desktop Experience, "when everything has failed, read the operating instructions.

  • I want to know how to put my vista as a vpn server, so I can connect from work?

    I have Vista Home Basic! and I want it to be VPN server so this way I can access resources on this subject. After researching I found that a customer who wants to set up a private network virtual assigned must address PUBLIC IP. Please ask me I would thank you for it!

    None of the editions of Windows Welcome in native mode allow remote connections from an external PC.  In addition, your own home network router should protect your LAN House of this type of connection.  If you want to connect to your home PC, you need to set your router firewall to allow incoming connections on a port of your choice (not standard ports for incoming connections) and you will ned to install a program such as VNC to accept the incoming connection.  Alternatively, you can buy a service like GoToMyPC (http://gotomypc.com/) that will secure your home firewall courses.

    Brian Tillman [MVP-Outlook]
    --------------------------------
    https://MVP.support.Microsoft.com/profile/Brian.Tillman
    If a response may help, please vote it as useful. If a response to the problem, please mark it as an answer.

  • Sharing internet connection from my laptop Sony VAIO Windows 7

    Hello

    I use a Modem of Dongle USB into my laptop which is a Windows 7 laptop, by which I connect to internet on my laptop. Now, I want to share this internet connection from my laptop with my Nokia Lumia 620. Please tell me details how to set up my phone as a wifi router. While my 620 Lumia cannot detect my laptop wifi signal.

    Actually, to clarify, I want to use my laptop as a WiFi router to connect Internet to my 620 Lumia. That's all. Thank you.

    Please note that I use the Dongle USB Modem for internet connection in my laptop and my laptop has WiFi support

    Also, I tried to share internet from my laptop through the technology Intel® My WiFi for my Nokia Lumia 620 but when I tried to connect my phone sent me a message that says: "your phone could not connect to the WiFi network, because there is no response from the network. Please try again later.

    Hi Sajid,

    Thanks for the reply.

    There is no option/feature to share the internet connection between computer and mobile. As Ramesh, said that you will need to install any third-party program or app to perform the task. As I see you have answered in the response of Ramesh with the third-party application names. We recommend not all third-party programs for the task you are trying to run.

    I suggest you to contact the Nokia support for assistance.

    Nokia Support: http://www.nokia.com/in-en/support/product/lumia-620/

    Warning: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

    Please do not hesitate to visit our Web site for any help with the Windows operating system.

  • How to prevent users from a domain network to connect from another pc

    We have a domain based LAN with 6 users with individual workstations and a server (windows server 2003).
    Is it possible to configure a workstation in such a way that they would make newspaper-on the system using only a user ID?
    Currently all users can connect from any workstation using his ID and password. I want to avoid this.
     
    For example:
    The USER is a user who uses a WS-1 station,
    B the USER is a user who uses WS-2 workstation,
    USER-C is a user using the workstation WS-3
    then currently USER 1, USER 2 and USER-3 can log - on the system from any workstation using a credential.
     
    I want to avoid this.
     
    What I want is, WS-1 workstation can only be connected to the USER-A credentials, the WS-2 workstation can only be connected by the credentials of the USER-B and so on.
     
    Is this possible?

    Hello Chetan,

    You're in the wrong Forum for this type of question which is one most appropriate for the ad server and group policy (with possibly the local policy on the workstations).  I would move this if I could, but we do not have this feature in our magic Toolbox.

    To start, see if the information contained in this TechNet article help: http://social.technet.microsoft.com/Forums/windowsserver/en-US/3639e354-3a41-41b9-bf2e-74abc49e23d6/user-permision-on-workstations.

    If not, then open a new question/thread in this same forum http://social.technet.microsoft.com/Forums/windowsserver/en-US/ and ask your question there.  I am sure that you will get detailed advice covering both sides of the situation (Server and workstation) better than here where there is a tendency to focus only on client computers, not servers, unless that quite simple (and being an MCSE, I know that's not really simple - but it also isn't really very difficult if you understand the basics - and even then they should be able to help) to find articles or provide instructions to pass you this part).  I have no doubt that they can also bring about changes, you need to establish which are specific to the workstation (and maybe even have a model of batch file to semi-automate the process - but now I'm guessing / hoping).

    In any case it is really where you should start and return only if explain you what it is about the customers that they cannot handle and need us to help you (because I can't imagine that happening).

    Good luck!

    Kosh

Maybe you are looking for

  • Missing features in pictures

    If someone managed to sort the photos with a title rather than the date. This is a great function in iPhoto, but shamefully he disappeared in pictures, and it prevents to make any kind of organization or edition

  • Satellite Pro A40: CD-RW/DVD drive cannot read DVD

    Hello The reader combo CD-RW/DVD on my Satellite Pro A40 (14 months) stopped reading DVDs (DVD - R or the video, have not tried other types), although it can play DVDs some time. I've cleaned the disc by using a cleaning disc. I think the problem sta

  • Problem VLAN HP Mini 110-4101er

    Hello. We have a level 2 + switch with VLAN. This netbook is unable to obtain an IP address from the DHCP server. Parameters default network has been applied. The same thing with another HP laptop with the same NIC Realtek. But another Acer netbook w

  • Equium A60 issue of the wireless USB mouse

    I bought 3 optical mouse for my equium A60. The first 2 have worked for a short period, but then appeared to be very erratic, beating on the entire screen and the slightest touch. I just bought a third and spend money on it to combat this problem, bu

  • New video card.

    Hello I have a desktop HP pavilion p6-2106 and I want a new video card, so I can play some of the games of "new". It doesn't have to be so I can't play evry thing on max settings but just low/medium with a decent pace so I'm looking for a decent vide