Connection (hard drive, Add ' l router) to Airport Extreme.

Similar Questions

• I installed an external USB connected hard drive Seagate, it slowed the computer and check the new disc repeatedly

  Hello

  I installed an external USB connected hard drive Seagate to copy some movies and pictures of my HP laptop with Vista, but it became a big problem. It slowed the computer and check the new disc repeatedly. Then it wouldn't start without the external drive at all but it was working fine once he was conducting with the external hard drive. So thinking I can outsmart the computer, I uninstalled the drive from Control Panel. Now it primer not at all. The computer lights up briefly and then goes out of itself almost immediately, is there a solution to this? Thank you

  SOM

  Original title: startup problem

  Hi SomBhattacharya,

  Please try the possible fix following first thanks to Carey Frisch:

  1. open the BIOS of the motherboard.
  2. find where it says Priority Boot Device, then select CD/DVD-ROM 1, 2nd Hard Drive and disable all the rest.
  3 find somewhere in the BIOS where it says BOOT USB, Wake on USB, etc. and disable all unnecessary options.

  And second if it does not help, you can try the following with Blue Michael:

  Local Geek Squad had me intentionally set the BIOS to the correct order, then re-order and SAVE.
  It worked, even if the list of the BIOS was always in the right order.

  I hope this helps!

• Presario 2175US not able to connect to the radio after installing Apple Airport Extreme router

  Hi all.  I have a Presario 2175US portable computer that is running Windows XP SP2.  The wireless adapter is a Broadcom 802. 11b / g WLAN adapter.  We have recently installed a router Apple AirPort Extreme in our House, with a network WPA2 key, and while the wireless network is visible on my laptop, when I try to connect, it tries to connect for about 90 seconds, but fails.  Unlike other laptops that we have, it does not ask me to enter the network key before trying to connect.  If anyone has a solution to this problem, I would be very grateful.  Thank you.

  Thanks for the comments, Paul.  I am pleased to say that the problem was solved after I installed the Windows XP SP3.

• Connection USB Hub with Multiple Hard Drives Wi - Fi router

  I was shopping for a router wireless n. I liked this one because of the Gigabit and the usb socket: http://www.linksysbycisco.com/CA/en/products/WRT610N

  I was wondering if I could plug more than 1 hard drive into this USB port using a usb hub. I would like to use the router as a kind of SIN. I have a few drives hard usb and I would like to access it without having to be on all computers.

  Don't you think that the firmware on the router supports more than 1 hard drive? Has anyone tried this before? Can someone test it for me if you have the right hardware?

  Thanks for the help

  No, the Linksys WRT610N, you can use a single USB and hard drive... However on NAS200, you can use two USB and two hard drives.

• two connected hard drives but only see a

  I have a USB splitter attached to my airport extreme, he sees a hard drive that I use for time machine, but he did not see the other. What can I do to access the 2nd hard drive?

  By the term "Dispatcher USB", I guess you're saying that you have a USB powered... hub that would be correct?

  If Yes, what is the number of brand and model of your USB hub?

  The drive that you currently can not 'see '... How this drive is formatted?

• Connection hard drive from the old to the new system

  Hello...
  I have an external hard drive that I used about 4-5 years ago and need to connect to it to see what if anything
  is saved to it. When I connect it to the top and try to go to Explorer/Computer...it does not appear?
  Why is this?

  Sorry... my mistake... no need to answer. Just after I thought about it

  Click on send... of course!

  Hello...

  I have an external hard drive that I used about 4-5 years ago and need to connect to it to see what if anything

  is saved to it. When I connect it to the top and try to go to Explorer/Computer...it does not appear?

  Why is this?

• How to disable integrated PERC S300 controllers and connect hard drives directly onboard SATA

  Hello

  I bought new servers, two of them came with PERC S300 controllers. When I tried to install Linux (CentOS) on this subject, the system could not see the RAID!

  After some research, I noticed that it is Windows specific (fake RAID)

  I want to disable this controller and connect my hard drives directly to the main card SATA connectors and implement a software RAID under Linux.

  What I need is:

  What cables I need to order for this?

  Thank you

  When I picked my servers and decided on their specifications, this note (red) was not on the site, and I am sure about that because I have not all Windows servers on my network.

  Now that I ordered and received them, I'm looking for a solution.

  I ordered this kit: Dell PowerEdge HDD DATA CABLE KIT DP/N C450M CN-0C450M

  

  I will receive next week. I hope that this will help me get around this annoying problem.

• BSOD with Memory_Management error when connecting hard drive external

  I have an ASUS all-in-one about a year with Windows 8.  About a week ago, I got the BSOD with error Memory_Management and OS was never able to recover.  After trying several system restores with no luck, I unplugged my external hard drive, and the operating system booted up normal.  I checked the hard drive on another computer and it worked fine.  I tried another external hard drive on my ASUS and as soon as the operating system detected it, I got the BSOD again.  I tried other USB ports with the external hard drive and the same result.  I tried a USB stick in the USB ports and it worked fine.  Need help please I can save is no longer my files.

  It is a very strange problem if associated USB devices work, but the HARD drive is not. Have you checked for a firmware update for the manufacturer HARD drive + assured your USB drivers on the computer, it blocks are perfectly up-to-date on the site of the manufacturer (not Windows Update or Device Manager)?

  Kind regards

  Patrick

• Connectivity with AT & T-Motorola 3360 and Airport Extreme problems

  Bought a new extreme-Airport (7.7.3) to replace my old AE after 9 years of service.  The installation procedure, but could not get the airport to connect with my modem (Motorola 3360).  Called at & T and they crossed put me the modem in Bridge mode and which seemed to work.  But only temporarily (about 5 hours).  Restart the modem and the airport was not working.  Troubleshooting I tried to plug my MacBook directly into the modem, but even the computer couldn't get an internet connection.  Another call to AT & T and they reconfigure the modem to their end.  After 90 minutes and try everything they could, they have finally admitted defeat and told me that they could not solve the problem.

  However, after a fairly exhaustive search of this forum, seems to be two issues that many people is with Airport extreme.  One is that the modem (in this case a Motorola 3360) is perhaps not fully compatible with the airport.  The AT & T support person was not aware of this until I asked about it, so she did a quick search and was rather surprised to see that there is a lot of people having problems with the Motorola Modem.  She told me that they use no more Motorola modems but ship the 6200 of Netgear.  "All know issues?", I asked.  She sought and, to his surprise, even once, there was.

  So, first question.  Does anyone know a modem that is compatible with the airport or use one that they had to limit problems with?

  The second question prevailing seems to be with the IPv6 protocol.  Anyone know if there are problems with the AT & T IPv6 protocol and the most extreme airport?  I did not disable IPv6 yet to see if that helps.  I thought I'd ask here first.  Couldn't find anything on the AT & T site.

  When I return from the road (great place to go to get away from technology) I will make a new round of full power of all the components and try Setup again from scratch.

  Any ideas or suggestions would be greatly appreciated.  Miss all know profanity.

  Thank you.

  Any other relevant information: 6.3.1 the utility Airport, Airport Extreme 7.7.3, MacBook Pro running 10.8.4, modem Motorola 3360, AT & T high speed DSL, shoe size 11-1/2 wide.

  When you have configured the 3360 as a 'bridge', this would mean that the AirPort Extreme should then be put in place to provide the PPPoE connection service. The airports are not known for their reliability in this type of installation... no matter the type of modem that you can select, so I drop this method as a connection option.

  If you want to keep the 3360... and you have time to experiment... then you can set the 3360 to its original default settings and configure the router from the airport most convenient to connect using DHCP in router Mode of DHCP and NAT.  That will produce what is called a message Double NAT, but maybe it's not of concern on a simple home network, and Apple provides you with the option 'Ignore' the Double NAT, so the airport will display a green light instead a light orange blinking slow.

  You need to try this configuration for a few days to see if the Double NAT will be a problem or not, because it is not possible to predict the effect of a Double NAT on a network... you have to test a few days see how things behave.  If this configuration works well, for you, then you can leave it as what.

  Please note that I do not recommend this type of installation, just suggesting it as an option this work could , if you want to keep the 3360.

  How Double NAT affect IPv6, I can't tell, since I did not use att for several years, and I'm not familiar with their implementation. On wired, IPv6 works fine on the airport with Comcast and Time Warner.  We can provide these parameters for you if want, but have no idea how well... (or if)... they will work with ATT.

  If the installation of Double NAT does not work, your best option would be to go there and get a modem/router or gateway to ATT device and then set up the most convenient airport in Bridge Mode works correctly with the modem/router ATT.  You will turn on the routing of ATT function in this type of installation, but the airport can also produce a signal from the wireless network that you can use.  The modem/router ATT will also provide a wireless signal that you could use for guests, or disable the feature, if you do not need two wireless networks.

  This may also be the best option if you want to configure IPv6 as IPv6 of ATT service must be compatible with the modems/routers and gateways.

• Canvio Connect HARD drive - how to get 10 GB of storage with Mac icloud

  Hi I have a 500 GB drive HARD Canvio connect. I formatted to FAT32. In doing so, I have (I think) removed the pre-installed driver needed to get my 10 GB of storage free icloud. When I look at the toshiba site it says do not download here or you will get only 5 GB of storage instead of 10 GB. any suggestions how to get all of the 10 GB advertised on the box?

  Almost the same question, where is an answer?

• An operating system can be downloaded on a USB connected hard drive?

  The University I attend offers an upgrade of the Sytems operating through download. I want to upgrade to Windows 7, but do not have the capacity on the SSD drive in my notebook. This OS can be downloaded on the hard disk the new SSD when connected to my computer via a USB port?

  What size Flash drive works best?

• All my Airport extended expresses abandoned their Wi - Fi connection to my base station can the airport extreme.  In other words, the light goes from green to yellow flashing and I can't reconnect.  All ideas

  All my express airport extended (one for music, one for the printer and one to extend range) lost their connection at the same time.  In other words, they all went from green to yellow flashing.  I was not able to reconnect.  Any ideas on how to solve this problem?

  Your first step is always power off the entire network... what... and then restart in good order.

  Modem... Wait 2 min

  Main router... Wait 2 min

  Extenders... Wait 2 minutes.

  Printer and other clients... wait that see everything toward the top.

  If this fails, then you need to find how the network is down... Connect the modem to the computer by ethernet... didn't you internet... If Yes... then try to the main router... If so, try again the next step... When you find the scene of the breakdown, reset it to factory and redo the configuration.

• External SSD hard drive not detected by Airport Extreme/Time Capsule

  Hello everyone, I have the following problem:

  Framework

  -J' bought a 1 TB Samsung SSD 840 EVO internal media.

  -He is locked in a case of badges and used as an external hard drive

  -J' have an Airport Extreme (5th generation)

  -J' have a Time Capsule (4th Gen)

  -My MBP detects the SSD external hard drive when it is connected to the USB port and works fine

  Problem

  -I connect the external SSD hard drive to the USB port on both TCapsule and AExtreme, but the HD is not detected directly (USD and with powered hub of USD)

  -HD was formatted as OS x journaled Extended

  -J' tried smb and cifs via 'connect to server', but does not work.

  Any help will be greatly appreciated.

  Juan

  Unfortuantely, Apple did not update the firmware on the USB key (it is still 2.0) port on their routers for a number of years.  As a result, new USB 3.0 drives may or may not work with airports.

  Yes, we know that USB 3.0 is supposed to be backward compatible with USB 2.0 in theory, but theory does not always work in practice.

  If your drive is formatted as Mac OS extended (journaled)... also called HFS +... .and you have tried the drive with and without a USB hub powered and the reader will not be displayed with you check using the AirPort Utility disks tab... then you have one of a number of readers who do not work with routers from the airport.

  I just checked a new LaCie USB 3.0 drive I have here. It works perfectly with a Mac, but it appears not at all when I connect it to the USB port or a powered new AirPort Extreme or new Time Capsule directly, or by using a USB hub.

• Can I use an AirPort Extreme to add wifi to wired devices?

  Essentially, I would use an AirPort Extreme as a wifi adapter WITHOUT using it as wireless access point. I really just want to access my wireless internet and distribute the connection via Ethernet.

  For more context, I have a time capsule airport connected to my modem fiber. Time capsule does a great job of the town house with wifi coverage. However, I have a couple of components in my home theater, who are not able WiFi (DVD player, older game system, etc.). I got to have an AirPort Extreme, so my hope is to use an Internet for these components. I would have preferred that she not also "extend" the wireless network and contract my all along (I know this isn't the end of the world, I just useless expansion of the range so there is no reason for me to enter the equation or more wifi signals bouncing around the House).

  I searched a bit and encoder table extend network via wifi or the creation of a network of travelling, but I have not found a way to have the extreme put in place to receive the rebroadcasting wifi without her signal. It's something I can do?  In the circumstances, any other suggestions for setting this up that doesn't involve running one cable Ethernet or the purchase of additional equipment?

  Thanks in advance!

  I would use an AirPort Extreme as a wifi adapter WITHOUT using it as wireless access point. I really just want to access my wireless internet and distribute the connection via Ethernet.

  This would work... IF... the AirPort Extreme has been implemented to extend wireless network provided another router from Apple. Which would mean that the AirPort Extreme also would act as a point of access Wi - Fi.

  It does NOT at all if you try to connect to a third-party router wireless AirPort Extreme wirelessly.

  Ironically, an AirPort Express can be configured to do exactly what you want using either a router from Apple or a third-party router as the "primary" router If two ports Ethernet on the Express are too few in number, you can add an Ethernet switch to create more connections.

• How to connect two external HARD drive satellite and the same printer?

  Hello

  I have now two laptop Toshiba Equium.
  What is the best way to connect them so that they can access the same external hard drive and the same printer?

  Thank you

  Hello

  I guess the two laptops are in the same network; Home LAN or WLan. Right?
  I this case I recommend you connect HARD drive and printer to one of the portable satellite.

  Then you can share the HARD drive and the printer with other cell phones on the LAN.

  You could add the network permission to others, and in this case the other participants of the network would be able to share the printer and HARD drive.