connection internal dummy

Similar Questions

• Two servers to connect internal using the virtual machine even in a swimming pool?

  I was deploying a pilot here VDI environment.  Working with the deployment with the planning guides, most things went smoothly.  However, in practice (and by the guides and information online) I learned that ultimately it works best to have two individual servers to connect internal (not replicated). a dedicated to access internal only, and the other coupled with a security server in the DMZ.

  My question is, can a system (physical workstation w / agent or VM) live in a resource pool manual for two managers of internal connections?  What is the best way to manage a scenario in which a worker would use a specific virtual machine during the day (and thus the internal connection manager), verus remotely using this same VM?

  Also, when you have a connection to Server 2, should a 2nd database of events created in SQL, or if it can share the same database of events?

  Thank you!

  sketchy00 wrote:

  However, in practice (and by the guides and information online) I learned that ultimately it works best to have two individual servers to connect internal (not replicated). a dedicated to access internal only, and the other coupled with a security server in the DMZ.

  Lol this is not correct. For a mode environment that supports both internal and external users, it is true that you should have one or more servers dedicated to the internal connection and one or more dedicated for external, but they should all work as a replica group. for example, to install the first as a standard instance and others as a replica instance. In this way, users can access the same pools they are internal and external, administration can be performed only once on the entire environment.

  Architecture and planning guide is a good reference.

  http://pubs.VMware.com/view-50/topic/com.VMware.ICbase/PDF/view-50-architecture-planning.PDF

  In particular, look at the diagram page 61 that shows this. All 4 connection servers are in the same group of replicated, then it will have been installed as a standard and others installed as replicas. Of course, you don't have to have 4 unless you have HA needs, you can have just two and so without balancing the load, but in all these cases, the connection servers share the configuration via the replication data.

  I hope this helps.

  Select this option.

• ORA-00257: archiver error. Connect internal only, until that releases

  Hi all
  
  From the connection to my 10g database, I encounter the error ORA-00257: archiver error. Connect internal only, until released by.
  
  How to connect internally and to solve this problem step by step.
  
  Kind regards
  Stephen

  Dollongo wrote:
  Hi all

  From the connection to my 10g database, I encounter the error ORA-00257: archiver error. Connect internal only, until released by.

  How to connect internally and to solve this problem step by step.

  Kind regards
  Stephen

  Your disk space or the flash recovery area is full, delete the old archivelogs or backup them and then perform

  rman target /
  crosscheck archivelog all;
  delete expired archivelog all;
  

  or connect with sqlplus

  sqlplus "/as sysdba"
  show parameter db_recovery_file_dest_size
  alter system set db_recovery_file_dest_size=
  alter system switch logfile;
  

• Can I eject my usb devices connected internal SATA hardrive...

  OK we know that when you plug in a usb flash drive, you can click on the usb icon in your taskbar and then eject the device... Well well my internal sata HDD my OS running on shows in this list as well! I think it's a bug. Just a thought.

  Hi, the fireballs
  I don't know if this is a bug or not, but it is interesting.
  I think that I him would NOT eject just in case. He'll probably just a mistake.
  But as I said, I wouldn't do it. It could make your system unbootable.

  If you want to report to Microsoft and see what they say, I included a link to a site for reporting something 'interesting '.

  http://connect.Microsoft.com/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• VPN remote access - no network connectivity internal!

  Hi Experts,

  I understand that it is a very common problem when considering the implementations of IPSec VPN for remote access using Cisco VPN Client. But for the last six months, I have tried to configure remote VPN access to as many sites customer and gets stuck to the top with the same question!

  -The remote VPN Client connects, authenticates successfully to the local user database (to make things easier, I used the local user authentication), the tunnel is set up (I could see the exit of the isakmp #show her as a AM_ACTIVE ). So I think that the parameters of encryption and authentication for Phase 1 /Phase 2 should work because the tunnel is having successfully established

  -Now comes the question, no connectivity to the internal network. I tried all the possible solutions, that I could find online.

  1. the most common problem is NAT - Traversal not active

  -Compatible NAT - T with the time default keepalive of 20

  2. None of the configurations NAT to exempt remote VPN traffic

  -A ensured that Nat configurations not present in configuration and internal network 192.168.1.X VPN traffic networks VPN 192.168.5.X /192.168.10.X being exempted NAT

  3-Split tunnel configurations

  -Reconfigured Split tunnel access list configuration Standard access list expanded (although not required as a Standard access list is more than enouugh, if I'm not mistaken) to allow traffic selected from 192.168.1.X for 192.168.5.X/192.168.10.X that will create routes on Client that allows users to simultaneously access VPN resources and access Internet VPN client. The Tunnel from Split network group was added again to the group policy.

  4 enabled Perfect Forward Secrecy (PFS) /Disabled

  . It may be an extra charge, it has been disabled / enabled

  5. the road opposite Injection

  -Ensured that a temporary reverse route has been injected to the routing table by allowing the reverse Route Injection to insert automatically the temporary static routes to the remote tunnel using the command set reverse road networks

  A few more interesting things were noted:

  Encrypted and Bypassed packages found when a continuous ping started the ASA inside the interface.

  No decryption happens of the VPN Client, which means that there is no answer back from the network traffic statistics.

  Decryption and packages are found be increasing when I try to ping of the IP address to the customer (192.168.0.10) has published the SAA. But on the SAA, I'm not back any response and showing as? . So that would mean that there is communication of ASA to the customer via the VPN tunnel while no communication is happening from the internal network to the customer

  

  The entire configuration is shown below

  ASA Version 8.2 (1)
  !
  ciscoasa hostname
  activate the encrypted password of AS3P3A8i0l6.JxwD
  2KFQnbNIdI.2KYOU encrypted passwd
  names of
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  address IP X.X.X.X 255.255.255.0
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  passive FTP mode
  access-list extended SHEEP allowed ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0
  ST1 list extended access permitted ip 192.168.1.0 255.255.255.0 192.168.0.0 255.255.255.0
  pager lines 24
  asdm of logging of information
  Outside 1500 MTU
  Within 1500 MTU
  IP local pool testpool 192.168.0.10 - 192.168.0.15
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0 access-list SHEEP
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Route outside 0.0.0.0 0.0.0.0 X.X.X.X 1
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA authentication enable LOCAL console
  AAA authentication http LOCAL console
  the ssh LOCAL console AAA authentication
  AAA authentication LOCAL telnet console
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  http 0.0.0.0 0.0.0.0 inside
  http 0.0.0.0 0.0.0.0 outdoors
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-3des esp-md5-hmac FirstSet
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  Crypto-map dynamic dyn1 1jeu transform-set FirstSet
  Crypto-map dynamic dyn1 1jeu reverse-road
  dynamic mymap 1 dyn1 ipsec-isakmp crypto map
  mymap outside crypto map interface
  crypto ca server
  SMTP address [email protected] / * /
  crypto ISAKMP allow outside
  crypto ISAKMP policy 1
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 43200
  Telnet timeout 5
  SSH 0.0.0.0 0.0.0.0 outdoors
  SSH 0.0.0.0 0.0.0.0 inside
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.10 - 192.168.1.132 inside
  dhcpd dns 8.8.8.8 4.4.4.4 interface inside
  dhcpd allow inside
  !
  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal RAVPN group policy
  RAVPN group policy attributes
  Split-tunnel-policy tunnelspecified
  Split-tunnel-network-list value ST1
  the address value testpool pools
  dk Z6zukyDvwVjP7o24 encrypted privilege 15 password username
  sv i1gRUVsEALixX3ei encrypted password username
  tunnel-group testgroup type remote access
  tunnel-group testgroup General attributes
  address testpool pool
  Group Policy - by default-RAVPN
  testgroup group tunnel ipsec-attributes
  pre-shared-key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  !
  global service-policy global_policy
  context of prompt hostname
  Cryptochecksum:48f0863a70b8f382c7b71db0b88620fe
  : end

  ----

  Could you please help me identify where I'm going wrong. Its been a long time I have trying to figure out but nothing seems to work! ;-(

  Help, please!

  Thank you

  ANUP

  (1) pls replace the tunnel ACL ACL standard split as follows:

  no extended ST1 192.168.1.0 ip access list allow 255.255.255.0 192.168.0.0 255.255.255.0

  access-list allowed ST1 192.168.1.0 255.255.255.0

  (2) add icmp inspection:

  Policy-map global_policy

  class inspection_default

  inspect the icmp

  (3) Finally, I add the following so that you can test the ASA inside the interface:

  management-access inside

• Connection internal drive Bay multimedia input usb dislodged the HP Pavilion m9350f?

  I got my PC back from "That Chick" computer for the video card GE Force faulty repair and connection hard drive of personal media on my HP Pavilion m9350f Bay PC came off in transit (i "give he's the center of repair a break).  When I plug it on the motherboard for the internal USB connection back in?  the electric connection is OK only the small connector 5 pins for the usb connection that is on the motherboard hangs inside the case, I might refer to "The Computer Chicks", but tha would be cos on another $ 100.00 of service and shipping costs, and if I knew where on the motherboard, it will I could plug it in me.  Thank you if you could send me a picture or a motherboard layout where it happens I would be very grateful.

  Richard W.

  Check this: http://support.hp.com/us-en/document/c01421635

  Normally, this Pocket drive USB headers are connected to the motherboard via the 'F_USB1' or "F_USB2" but I see a different type of USB plug labeled "F_USB3' through 'F_USB6', so it can use one of these check the plug to check the connection type

  BTW: Scroll to the tab layout of motherboard on the linked page and click on it to see where the plugs are on the photo page layout I'm talking about.

• Archiver error. Connect internal only, until that releases

  Hello
  I have Oracle 10 g on HP UX instaled. When I connect to it as sys I get no error. But when I login as another user (WEB_EDTOR) I get the error "archiver. "connect to internally only until that releases. I quried SET * OF V$ RECOVERY_FILE_DEST. I know the SPACE_LIMIT is 4070572032, SPACE_USED, space_rec AND NUMBER_OF_FILES are all 0. What could be the reason for this error? Thanks in advance.
  
  Published by: Mikail October 20, 2011 22:41
  
  Published by: Mikail October 20, 2011 22:49
  
  Published by: Mikail October 20, 2011 22:57

  After more than a few things here

  (1) the output of the query below

  Select name
  floor (space_limit/1024/1024) "size MB"
  ceil (space_used/1024/1024) "used MB"
  v $ recovery_file_dest
  by name
  /

  Which is physically free space to mount point? Because the views are logical...

  (2) SQL > archive log list

  (3) SQL > show parameter db_reco

  Expiry of logs archiving or expired backups?

  RMAN > delete all. expired archivelog

  Thank you.

• Re: Toshiba Stor.E Basics 1.5 TB, USB 3.0 - about connection internal

  Please how can I know if inside the drive is sata native or with USB soldering on the circuit board?

  My model is: HDTB115EK3BA

  Thank you.

  Hello

  Unfortunately, the Toshiba STOR. E BASICS - BLACK 2.5 specifications page "-1.5 to provides no details on the controller, but in my view the inside of the box, you will find a common SATA 2.5 which is connected to a controller HDD USB SATA."
  http://www.Toshiba.EU/hard-drives/portable/store-basics/hdtb115ek3ba/

  You can also try some freeware like HDDscan for example tools to scan the HARD drive and get more details.

• LJ Ent m601: LJ Ent m601 PCA connect internal.

  Does anyone know if connector J2002 (top of the Exchequer, just under the USB connector) should be something related to it?

  My service manual says 5 connectors to disconnect to change the Board but I saw 4.

  And in most cases (as for the DC controller) if there is an empty connector the manual mentions that.

  If anyone knows that there should be 5 cable 5 connectors please help me find whre who 5th going to if I can try to find it in the printer.

  Thank you

  Dan

  Hello

  J2002 connector cable is designed for HIP (M602 and M603) models only the Pocket Hardware integration.

  Sound off for printer 601.

  Concerning

  HP.

• * fat * ORA-00257: archiver error. Connect internal only, until that releases * bold *.

  Hello
  
  I get this investment very error in 10G. My 12 GB Flash recovery area size. 10G I found there are a lot of files to archive log generating. Why this is the case, is it possible to minimize this log files.
  
  This makes me to have a single resource to monitor this log files. Please help in this regard.
  
  Thank you and best regards,
  
  Delphine K

  There will be 4 or more "automatic" jobs you'd see in DBA_SCHEDULER_JOBS

  AUTO_SPACE_ADVISOR_JOB
  FGR$ AUTOPURGE_JOB - this one probably is not running
  GATHER_STATS_JOB
  PURGE_LOG

  (for example query: {color: #ff9900} select job_name, run_count, last_start_date, last_run_duration from dba_scheduler_jobs order by 2;) {color})

  A job can be disabled with
  sys.dbms_scheduler.disable exec (' '< owner >'.) "< job name >"');

• is the power connector of 9642XT NI SBRIO J3 negative terminal internally connected to Terminal and mounting holes

  I have a SBRIO system with an isolated supply

  http://www.NI.com/PDF/manuals/375052c.PDF

  It is said on page 15, all connections of Earth GND D AI, AO, connected internally to the earth terminal.

  the negative terminal of the power of the J3 connector is also grounded internally?

  I have a system mounted on a box aluminuim, which owns the land on the Earth, and also the supply, which is used to power the sbrio gives voltage isolated, but now if the negative terminal of the J3 connector has an internal connection with the holes and the spade of Earth, how can I use my isolated power supply with the negative terminal is not connected to the ground its main power supply the connection output not the soil Earth domain controller.

  I can't open my system sbrio jury at that time to check directly.

  can you please help if negative - ve terminal J3 power connector is connected internally to the ground lug and mounting holes.

  Thank you

  Hi Freemason.

  I think I just you send an email in this regard, but to confirm, Yes, connector J3 is connected to earth ground in-house. You should still be able to use your power for the sbRIO.

  Best,

  Dan N

  Technical sales engineer

  National Instruments

• IPSEC VPN crossed/Uturn problems internal net connections

  I have an ASA 5505 I connect remotely.  I use it as a remote IPSEC VPN with crossed/uturn to allow me to surf the Internet with my IP address.

  I can't access one of the internal computers on my home network.  I was able to do it successfully in the past on an older IOS SAA, but I am now on a new ASA 8.2 running (1) and I am unable to connect internally.

  I would like to connect my Slingbox and Tivo which is my home.  I tried to ping the boxes and no luck.  In the past, when it worked I was able to ping devices.

  I enclose my config.

  Thanks in advance.

  Jon

  Jon,

  If you are able to PING 192.168.1.1 VPN client, it means traffic reaches right inside the interface of the ASA.

  Now, the ASA must forward packets to 192.168.1.6 when received.

  Follow these steps:

  Just add the keyword to the outside

  to this statement:

  NAT (outside) 1 192.168.2.0 255.255.255.0 outside

  Try again. If this does not work, make sure that the only NAT statements you have are the following (you can copy and paste):

  permit ip 192.168.2.0 access list NAT0OUT 255.255.255.0 192.168.1.0 255.255.255.0

  permit 192.168.1.0 ip access list NAT0IN 255.255.255.0 192.168.2.0 255.255.255.0

  no global (inside) 1 interface

  NAT (inside) 0-list of access NAT0IN

  NAT (inside) 1 192.168.1.0 255.255.255.0

  NAT (outside) 0-list of access NAT0OUT

  NAT (outside) 1 192.168.2.0 255.255.255.0

  Federico.

• Discovers the connection Broker (the same external and internal DNS) URL

  I am trying to determine if its possible to connect internal broker who resolves internal view.compay.com (10.1.1.10) and say a security server located in the DMZ that resolves itself into view.company com (199.10.10.10).  Is it possible to keep this view.company.com for both?  At the moment we just solve internally to desktops.company.com, but I am trying to determine how it would be possible to use the same in both.

  You can have the will of the URL to the same name.    We have our internal DNS pointing to the name company.view.com and then from outside company.view.com resolves to our security server.

• Help to connect two virtual machines to internal network

  Hi all

  I have 9 of VMware Workstation, and I installed two identical WinXP VMs. I put them both on the same custom netowrk (VMnet3) setting. In the virtual network on my Win7 host editor I updated VMnet3 'Host-only (connect VMs internally in a private network)', and I have left empty the box "Connect an adapter to the virtual host to this network".

  What I'm trying to do is to connect the two virtual WinXP only between them, a small connection internal, so that a VM could ping on the other virtual computer, but cannot connect to my Win7 (real internet) host.

  Now both show WinXP that they are connected (the icon of the internet with two small screens is there), and they both have an IP assigned. However, does not ping one of them to another IP address.

  Any ideas?

  Thank you!

  Jonathan

  Firewall is turn on the Windows XP machine?

• Should we use the same data source for the internal connection and Save Point?

  Hello
  
  Configuration of AM has an internal connection location db, adf - config.xml has also a Save Point db connection parameter, should we are all set to the same source database of the system or should create us a separate data source that is used only for the connection internal db AM of Save?
  
  jdev: 11.1.2.1
  
  Thank you very much!

  Hello

  its everything to you and you have security concerns if the backup point is registered with the business data.

  Frank