Similar Questions

• Cannot connect to itunes connect comes up with your ID apple is not enabled for itunes connect (2002)

  Cannot connect to itunes connect comes up with your ID Apple is not enabled for itunes Connect (2002)

  What did you do

• Latency with Garage Band 10.1.0

  Hi all new here.

  so please forgive me in advance by the lack of understanding about the functioning of a community.

  I just bought an iMac:

  system: OS X el 10.11.2 captain

  Processor: 3.1 GHz

  memory: 8 GB

  I have a problem with Garage band (10.1.0).

  The computer is brand-new, but I have a problem of latency (delay) when recording my voice into the microphone.

  the microphone is just plugged directly into the headphone (the only one).

  I don't find much in aid of GB on latency.

  I am very grateful if anyone can help

  Thank you very much

  Fab

  Hi fabianadellave,

  Welcome to the communities of support and thanks for your question.  I understand that you have latency when recording from an external microphone in your new iMac.

  1. The first thing I would say is to unplug your external microphone and any external audio devices and test using the internal microphone on your iMac.
  2. Then check the settings System Preferences > Sound for your Microphone (input) and speakers (output).
  3. For this test, make sure that the input device is set to mic internal (built-in)
  4. Make sure that the output device is set on internal speakers (built)

  In Garageband, recording a vocal track without effects.

  1. First, create a new project.
  2. Use the Audio - recording using a microphone or line input as a model for the project.
  3. Make sure that there are no effects like echo or delay active.
  4. Arm the track (planned for the record), and then click the record button and write down a few sentences.

  When you reproduce the return track, you hear any delay?

  Fabianadellave, if you have a chance to try this test-first of the hardware in your computer, please reply back with the results. In addition, if you can answer these questions, it would give us a better understanding of your unique situation.

  • What mic do you use?
  • You have an audio interface, you can work with rather than plug the microphone directly into the 3.5 mm headphone?
  • You use an adapter on your external microphone to this input of size?

  Once we confirm that the internal mic works as expected, then we can turn your external microphone.  For best results, use a microphone that has an XLR cable.  Plug the XLR cable into an audio interface that connects to the USB port of your iMac.

  Take a look at these resources for the voice recording in Garageband:

  The user of GarageBand 10 - audio guide

  Before recording audio

  You can record your voice, an acoustic instrument, or any other sound using your computer's built-in microphone or a microphone connected to your computer. You record sound from a microphone on an audio track.

  Before you start recording, do the following:

  • Connect a microphone to your computer and make sure the microphone is turned on and functional.

  • Connect an electric guitar to your computer and make sure that the guitar works.

  • Select the audio track you want to record to, or Add an audio track. Be sure to set the input source, the input volume level and follow-up of the piece.

  • Set the project bit depth, which is the number of digital bits that each sample contains. Record at a depth of 24 bits is recommended for most situations and is the default setting.

• Grant instruments that are connected to your system for you ensure that your external instrument records are tune without instruments software, samples or existing records in your project.

Set the input source for the track

1. Select the range that you want to use, and then click the Smart Controls in the control bar.

2. Click the Inspector button of in the menu bar of smart controls to open the Inspector of intelligent control.

• In the recording settings section, click on the button enter to switch between a pair of stereo input channels and a mono input channel, and then choose the source from the context menu of the entry.

  

Adjust the input for the sound source volume

1. Select the range that you want to use, and then click the Smart Controls in the control bar.

2. Click the Inspector button of in the menu bar of smart controls to open the Inspector of intelligent control.

3. In the section recording settings, adjust the recording level.

   

You can also select the automatic level control checkbox to automatically adjust the recording level. He lowers the level to prevent feedback and raises the level too low.

Hear your microphone or your instrument that you play and record (monitoring)

Do one of the following:

• Click the control button in the header of the track of the track that you want to use.

• Select the range that you want to use, and then click the control button in the record of the Inspector of intelligent control settings section.

  

You can also select the feedback Protection checkbox to avoid the Larsen effect while you play.

Create tracks

You add tracks to a project to keep your recordings, loops and other materials. When you add a track, you can choose the track type, format, input source (for audio) and output. The options in the dialog box new track vary depending on the type of circuit that you create.

The new track appears in the area of securities.

Create a new track

1. Do one of the following:

   • Choose track > new track (or press Command-Option-N).

   • Click on the button Add a track above the track headers.

2. Select the type of track in the upper part of the dialog box new track.

• For audio tracks, choose the input source from the context menu of the entry.

• Do one of the following:

  • To turn on monitoring audio tracks: check the box "I want to hear my instrument that I play and record.

  • To enable recording of audio tracks: check "prepare new audio tracks for immediate registration.

  • To change the input device: below the context menu entry, a line of text displays the current input device. Click the arrow next to the text, and then change the device in the Audio preferences panel.

  • To change the output device: drop-down menu below the exit, a line of text displays the current output device. Click the arrow next to the text, and then change the device in the Audio preferences panel.

• Click on create.

  The new track appears in the area of securities, and the library opens so you can choose a patch for the track.

  

Hope that helps...

• Why some devices (like the PS3) connects through the 5 Ghz band? (EA3500)

  Just installed a Linksys N750 (EA3500) router (WAN - LAN Configuration).

  I have set the two broadband networks: 2.4 Ghz and 5 GHz with different SSID and different WAP/WAP2 staff mixt.

  While some devices display correctly the two networks, I am facing problems with the 5 GHz band and wonder if it's the breath of some sort of failure:

  -My iPad offered the two signals and allow me to define the 5 Ghz band, but it is showing the weak signals and stall when loading Web pages; as soon as I put it instead on the 2.4 Ghz band, (standing at the same place, of course), what's up, excellent signal.

  -J' have a Mac Mini and the location of the PS3 side by side.  The Mac Mini seems to work perfectly in both bands, 2.4 or 5 - excellent signal. However, the PS3 has failed his test of connection and indicates that the signal is not noticeable on the 5 GHz. But connect as a wink on the 2.4 Ghz band.

  -Got on and off voltage signal of 5 GHz on a laptop; connected to 2.4 Ghz, everything works perfectly.

  -iPhone 4s: I can't even see the SSID of 5 GHz, but I get the 2.4 so Guess account...

  So I'm tempted to conclude that some devices can not just keep up (?) to connect on 5 GHz...  But... a PS3? ... Huumm... (but true: PS3 came out in 2006...)

  No logic to this?

  Thank you

  Rob

  There are devices just wireless which are not turned on or is not compatible to work with a network of Ghz band. The WiFi feature may not be up-to-date or limited to only work with a network of 2.4 Ghz. In your case, you might want to check with Sony so PS3 can be updated to work with a network of 5 GHz.

• Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  Why has my connection AirPort Extreme recently stopped with my Tablet Android and Windows 7 laptop, but connects very well with all Apple devices?

  What exact model of AirPort Extreme do you have? Either have your tablet or laptop Win7 been updated recently? They were both able to connect before and not now OR they were never able to connect? Can the laptop Win7 access Internet when connected by Ethernet? One of these devices have problems connecting to other networks Wi - Fi?

• Cannot connect Portege R200 with desktop PC on wireless network

  Hello

  I'm happy with newly acquired Tosh Portege R200.
  Successfully connected to the router and the internet, wifi.
  Changed the name of r200 and define your work group name so that the other PC will be detected - be they - and Tosh arise also under my network places, it does.

  So all hunky dory... until I tried to access the laptop on the desk, at which point WinXP threw a password request.
  And here's my question: since no password have been defined on the Portege (XP clean re-install) for all users or administrators what IS THE PASSWORD?

  Yours in hope and waiting oh great sage over there...

  Hello

  I have no idea what password you need, but usually, you have to set the right permission on the folder that you want to share on the network.
  I connected my two computers (both with Win XP) with a crossover network cable.
  Then I put the same name of working group on both computers and manually assigned IP address; IE: 192.168.50.1 and 192.168.50.2
  Then, I selected the folder-> properties-> sharing tab.
  Here you can set the permissions.

  Using the WiFi network, you must set the option for * Ad-hoc network.
  This allows you to use a connection from computer to computer.

• Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this probl

  Asslam o aliakum. I have a problem with itunes 12.3.2 it is not downloaded the 10 windows and when I connect m iphone with itunes and want to update to 9.2 says please download itunes new version for ios 9.2... help me with this... How to solve this problem.

  Greetings Dani56777,

  Thank you for using communities Support from Apple!

  I understand that you run Windows 10 and you must update iTunes to the latest version so that your iPhone will be recognized when connected. I do not know if you receive an error when you try to update iTunes or not.

  If you need information on how to update iTunes, please follow the instructions in the following link.

  Download the latest version of iTunes for Windows - Apple Support

  If you receive an error or alert, you can consider removing iTunes and all of its associated components and then reinstalling fresh iTunes on your computer. That would give you the latest version of iTunes. If you need execute this process, please follow the steps described in the following article.

  Remove iTunes Control Panel and its associated components

  Use the control panel to uninstall iTunes and software components in the following order:

  1. iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4. Hello
  5. Apple Application Support 32-bit
  6. Apple Application Support 64-bit

  On some systems, iTunes can install two versions of the Apple Application Support. What is expected. If both are present, do not forget to uninstall both versions.

  Do these elements in a different order, uninstall or uninstall only some of them. This could have unintended effects. After you uninstall a component, you may be asked to restart your computer. Wait to restart your computer until you finish remove all components.

  Remove and reinstall iTunes and software for Windows 7 and later versions - Apple Support components

  Have a great day!

• Cannot install my printer/error message-unable to create the object print dell v505, that the printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Original title: cannot install my printer error message

  I am trying to install my printer to dell v505 from the factory disc and get this error message: failed to create the object print dell v505 printer is not compatible with a polcy enabled on your computer that blocks NT 4.0 drivers (1930)

  Any help, need a lot.

  Hello

   
  1. what version of Windows are you using?
  2 did you the chnages in the computer before this problem?
   
  I would suggest trying the following methods and check.
   
  Method 1: Run the fix, install the printer and check
  Diagnose and automatically fix problems printing and printer
  http://support.Microsoft.com/mats/printing_problems/
   
  Method 2:
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719
  Method 3: Install the printer in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.
  http://support.Microsoft.com/kb/929135
  Note: Please, go to step 7 of the Kb to maintain the computer to normal startup.
   
  You can download the latest driver for your printer from the link below.
  http://www.Dell.com/support/drivers/us/en/04
   
   
  You can also check:
  Printer driver is not Compatible if a policy is enabled on your computer.
  http://support.Microsoft.com/kb/282011
   
  Error message when you try to connect to a printer in Windows Vista: "the printer driver is not compatible with a policy enabled on your computer that blocks NT 4.0 drivers.
  http://support.Microsoft.com/kb/931719

• 8620 HP: HP 8620 connects to Internet with WiFi

  After reading several posts I couldn't 8620 HP to connect to the internet using a wired connection.  This wired connection had no problem with printing or scanning to multiple computers on my network.

  I tried different solutions to make the wired connection to the Internet work:

  • Static IP address
  • Printer Firmware updated
  • Port forwarding (Port 80 for working on my router; could not do error reportef as duplication?)
  • Setting clock
  • Disable IPv6
  • Multiplle restart the printer and the router

  Then I tried to use wireless (WiFi) connection.  It worked.  Now, I really prefer to use the wired connection.

  If it helps I have a Linksys router e4200 with current firmware.

  Please help me make the wired (Eithernet) to connect to the internet.

  Thank you

  DocCottle;

  Thanks for your reply.  I solved this problem by printing two reports "HP Network Configuration";  One eithernet and wireless.  Then I compared the two differences because I know that it worked on wireless and not eithernet.

  The only difference between the two was DHCP making for the wireless and wide for a wiring.  As I assigned permanent IP addresses on the router, I guess that DHCP is fine.  I have change the wired / eithernet connection DHCP... Now it works!

  It seems strange to me, that was the question, but I'm glad everything is working now.

  Thanks again for your help and pour this solution into your bag of solutions when your help others.

• Unable to connect Bluetooth speakers with Windows 7 system

  Dear experts,

  I have a laptop HP Pavilion DV7-2014TX running Win7 Ultimate.

  I just bought a new Bose Bluetooth headset. I tried for 2 hours to try to pair it with my phone, but my laptop is not all bluetooth devices.  I tried as much as I know, but I'm out of ideas. The only thing that I think now is that my laptop is old enough that it is no longer compatible with the version of bluetooth on my helmet.

  Any help would be welcome, thank you.

  George

  Original title: Bluetooth

  Hi George,.

  Thanks for posting your query in Microsoft Community.

  I understand that you can not use headsets Bluetooth of Bose enabled on Windows 7, but I would like to learn more about the issue in order to provide you with better assistance.

  1. You are able to connect and use another Bluetooth device on this computer?
  2. You did it any significant hardware or change software on the computer before this problem?

  The question may arise due to the incompatibility with the Bose headphones Bluetooth driver. Then I suggest that you try the following steps Diagnostics to find out the root cause, apply patches, and check if the problem persists:

  Method 1:

  Try to follow the steps in the following link to resolve the problems with Bluetooth devices:

  The problems with Bluetooth devices

  (Note: article also applies to Windows 7)

  Method 2:

  If method 1 does not work, try to run the patch that is available in the following link and look for the question.

  Bluetooth devices do not work correctly on a computer that is running Windows 7

  Method 3:

  Alternatively, you can try to check if the Bluetooth support service is running.

  1. Click Start, type services.msc in the Start Search and press ENTER.
  2. In the list of services, double-click the Bluetooth Support Service.
  3. Change the startup to Automatic type, then click Start to start the service.
  4. Click on apply and then click OK.

  Trying to connect Bluetooth speakers with the computer and check if the problem persists.

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

• Connection problems SSID with several VLANs

  Hi all

  I'm having a little problem getting a device to associate with an access point and enter an IP via DHCP on a particular SSID. This access point has two VLANs, with two different SSID configured. The configuration is locked. For some reason I can't connect to 2 SSID on my wireless device, but the SSID works very well. I see authentication through the newspaper, so I know that the pre-shared key is correct, but may not enter an IP address (which makes me think I have a problem in the bridge group). Any thoughts?

  Also, I tried both a trunk port and an access port on the switch that is connected to the access point. With both, I can connect and enter an address IP of the VLAN 20 (SSID 1), but not to VLAN 10 (2 SSID).

  SSID dot11 1

  VLAN 20

  open authentication

  authentication wpa key management

  WPA - psk ascii 'key '.

  !

  SSID dot11 2

  VLAN 10

  open authentication

  authentication wpa key management

  Comments-mode

  WPA - psk ascii 'key '.

  Bridge IRB

  !

  !

  interface Dot11Radio0

  no ip address

  no ip route cache

  !

  algorithms for encryption tkip encryption mode

  !

  encryption vlan 20 tkip encryption mode

  !

  encryption vlan 10 tkip encryption mode

  !

  SSID 1

  !

  SSID 2

  !

  antenna transmit right

  straight reception antenna

  root of station-role

  Bridge-Group 1

  Bridge-Group 1 block-unknown-source

  No source of bridge-Group 1-learning

  unicast bridge-Group 1-floods

  Bridge-Group 1 covering-disabled people

  !

  interface Dot11Radio0.10

  encapsulation dot1Q 10

  no ip route cache

  Bridge-group 10

  10 bridge-group subscriber-loop-control

  Bridge-group 10 block-unknown-source

  No source of bridge-group 10-learning

  No bridge group 10 unicast-flooding

  Bridge-group of 10 disabled spanning

  !

  interface Dot11Radio0.20

  encapsulation dot1Q 20

  no ip route cache

  Bridge-group 20

  Bridge-group subscriber-loop-control 20

  Bridge-group 20 block-unknown-source

  No source of bridge-group 20-learning

  No bridge group 20 unicast-flooding

  Bridge-group 20 covering people with reduced mobility

  !

  interface FastEthernet0

  no ip address

  no ip route cache

  automatic duplex

  automatic speed

  !

  interface FastEthernet0.10

  encapsulation dot1Q 10 native

  no ip route cache

  Bridge-Group 1

  No source of bridge-Group 1-learning

  Bridge-Group 1 covering-disabled people

  !

  interface FastEthernet0.20

  encapsulation dot1Q 20

  no ip route cache

  Bridge-group 20

  No source of bridge-group 20-learning

  Bridge-group 20 covering people with reduced mobility

  !

  interface BVI1

  192.168.0.210 IP address 255.255.255.0

  no ip route cache

  Default IP gateway 192.168.0.1

  1 channel ip bridge

  Thanks for your help!

  Your bridge-groups do not have the tail. You have 10 VLANS mapped to bridge-Group 1 on the FastEthernet interface but mapped to bridge-group 10 on the radio just remove the bridge Group 1 of the main radio interface and apply it to the subinterface dot0.10.

• [Apple Watch] I can match with leather band aluminum case?

  I can match with leather band aluminum case?

  On the site, I can not select leather band if I choice an aluminum case.

  Hello

  All Apple Watch bands will be adapted to any Apple Watch of the same size of the case (42mm or 38 mm).

  When initially buying Apple Watch, it is only possible to buy preconfigured case and band combinations. All available options are detailed in the Apple Online Store:

  • http://www.Apple.com/shop/buy-Watch/Apple-watch

  Additional tapes can be purchased as separate accessories:

  • http://www.Apple.com/shop/watch/bands

• Can I connect my iWatch with my iPad?

  Can I connect my iWatch with my iPad?

  N ° Apple Watch can only be paired to an iPhone 5 or above.

  iPads are not supported.

  Apple Watch - technical specifications

• Can connect to Skype with a single account, but not with the other

  I am able to connect to Skype with my own login but not with the credentials of my friend on his pc. I can however connect with her details as well as mine on my pc?

  You need to upgrade your Internet Explorer to the latest version of IE8 for Windows XP.

  http://filehippo.com/download_internet_explorer_xp/

• Satellite L20-101: could not connect my TV with the svhs

  Hi guys,.

  I have a problem.
  I have a L20 - 101 and I can't connect my tv with my toshiba svhs output.
  I reinstalled the drivers for the motherboard and videography, what can I try?
  Thank you

  Okay, it looks like a really not nice problem.

  So, how do you try to switch to the TV? You have the possibility in your display properties, but not the machine * recognize * the TV? You also have the FN + F5 key combination to change the display, have you already tried?

  And regarding your display drivers (including vga you? nvidia or ati?)

  You can take a look here to find the latest drivers to work for mobile platforms:

  http://www.laptopvideo2go.com/
  http://www.OmegaDrivers.NET/

  Good luck buddy