Connection network Mobile problem

IPhone problem 6 (without lock supplier):

the phone loses the connection to the mobile network and cannot reconnect more - although in the coverage area of the network. remains in status "Searching" or "no network". Sometimes the settings menu-> carrier disappears as if it were locked provider.

you have any ideas on the cause of root?

Troubleshooting of the measures already taken, which do not solve the problem:

-Restart the phone

-extract and insert the Sim Card

-change the SIM (same vendor as a different vendor)

Troubleshooting steps already taken, that solves the problem temporarily (problem recurs after 3-5 days):

-reset settings network (settings-> general-> reset network settings)

-Erase content and settings

-reapply full of iOS (using recovery mode and iTunes)

rkopezky wrote:

IPhone problem 6 (without lock supplier):

the phone loses the connection to the mobile network and cannot reconnect more - although in the coverage area of the network. remains in status "Searching" or "no network". Sometimes the settings menu-> carrier disappears as if it were locked provider.

you have any ideas on the cause of root?

Troubleshooting of the measures already taken, which do not solve the problem:

-Restart the phone

-extract and insert the Sim Card

-change the SIM (same vendor as a different vendor)

Troubleshooting steps already taken, that solves the problem temporarily (problem recurs after 3-5 days):

-reset settings network (settings-> general-> reset network settings)

-Erase content and settings

-reapply full of iOS (using recovery mode and iTunes)

That said your carrier for you do not have access to their service?

is your iPhone carrier supported carrier?  Support of carrier wireless and features for iPhone in the United States and Canada - Apple supported

Tags: iPhone

Similar Questions

  • Connection network C7280 problem

    Hi, I changed my dsl provider to Comcast to ATT (also new router).  Printer, which worked fine, now does not connect again router.  New network appears, but after several attempts, Printer Setup Wizard indicates that it could not get a connection.  I ran a summary diagnosis on the HP and next to the line item "without filtering', the test lists"fail ".  -What it means and how could I solve this problem?

    Also the new router ATT (is the 2-wire model?) can have active filtering by MAC address. That would be a reason that "no filtering" failed on the wireless network Test report. If ATT gave you a Router 2 son, he has no doubt the encryption key (WEP key or WPA passphrase) preset. Generally, enter into the 2Wire (EWS) configuration page and enter the key into the 'custom' field has solved some problems.

    Although I am an employee of HP, I speak for myself and not for HP.

  • Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

    Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

    I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

    My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

    If someone could help on this - I would be very grateful

    Good news - update of my ongoing saga with this Belkin modem/router.

    Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

    So far so good

    Thanks for the help

    TREV Smith

  • Allow other users to connect through my internet connection of mobile phones.

    Quite simply, I'm setting up my xbox live to run through my internet connection of mobile.

    When I select the check box to allow other users of the network to connect through this computer's internet connection it turns off immediately, so is not enabled.

    I tried disabling the firewall etc to see if it limited the ability of sharing, but it did not work.

    Any information or help would be greatly appreciated.

    Hi Stewart,
     
    Please go through the article below which will help you to connect to windows live using your internet connection for your laptop.
    How to connect your Xbox 360 wired controller to a computer running Windows
    http://support.Microsoft.com/kb/906347

    Please also see the link below. This could help you.
    http://support.Microsoft.com/kb/978618

    If the problem persists, I suggest that question you post you to Xbox forums.
    Xbox support

    http://forums.Xbox.com/xbox_forums/xbox_support/default.aspx

     
  • Network Mobile blackBerry Smartphones

    My phone connects to another mobile network that I do not use throughout the day.

    I have a "Digicel" SIM card, but throughout the day the signal falls when I go I see the mobile network, I see "Natcom", another provider. It connects Natcom while I do not use this service here. I chose the manual connection, but the problem persists.
    Should I please?

    Charlesty wrote:

    It's a gift, it was purchased on Verizon, but I live in Haiti.

    We have 2 mobile network in Haiti: Digicel and Natcom. I a Digicel SIM card with this company that I subscribed. But the phone connect to automaticallyon

    You should have this problem to your mobile service provider. It can happen that your service provider has agreement with the Natcom and the place, where you belong / visit, homelessness Natcom signal strength is stronger then Digicel. Please report this problem to your service provider immediately.

  • Cannot connect Blackberry mobile access point using Windows computer.

    Original title: connection problem

    I use windows 8 on my hp15 and also a cell phone blackberry q10... I noticed that the hotspot from my phone does not appear on the windows network. but hotspot of the else phone shows and connects perfectly well and my q10 hotspot shows and connects on their own computer... any idea on what could be the problem?

    Hi Adam,

    Thanks for posting the query on Microsoft Community.

    If I understand correctly, you are unable to connect the mobile access using Windows computer point. Don't worry, we will help you with the question. It could be matter of settings.

    Manage the network and other utilities mentioned in the link below and check if it helps.

    Why can't connect me to a network? :

    http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-8

    Also try the other steps in the link below.

    Mobile broadband from end to end:

    http://Windows.Microsoft.com/en-us/Windows-8/mobile-broadband-from-start-to-finish

    For reference:

    http://BTSC.webapps.BlackBerry.com/BTSC/ViewDocument.do?externalId=KB31857&sliceId=2&DOCTYPE=KC&noCount=true

    http://docs.BlackBerry.com/en/smartphone_users/deliverables/55574/mes1342811963579.jsp

    I hope this helps to solve the issue. If the problem persists, get back to us. We will be happy to help you.

  • If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch

    If my software update of the Appstore stops to say 1.3 GB of 6.4 GB due to network etc problem it back once again to 1.3 GB rear or all the way from scratch.

    Hello Anshul230499,

    Thank you for using communities of Apple Support.

    If a download was interrupted in the Mac App Store, then whenever you have new Internet download should then restart.

    If a download application is interrupted

    Once an Internet connection is restored, your purchased downloads should restart automatically. The Mac App Store may warn you that there is a problem with the download and ask if you want to restart downloads. Confirming will restart all pending downloads.

    Download time may vary according to the size of the file and the speed of your Internet connection. See this article on purchases made on iTunes Store for more information on the time to download large files.

    Troubleshooting the Mac App Store

    Take care.

  • Connection network satellite L655-121 always shows 'disconnected '.

    Model: Toshiba Satellite L655-121
    OS: Windows 7 Home Premium
    NETWORK card: Atheros 8152 - 1.0.0.36 driver version (also tried 1.0.0.26)

    connection network always shows 'disconnected '.

    I tried the following:
    -straight cable connection from the laptop to the router - no link
    -crossover PC-to-phone cable connection = no connection
    -used work cable from the printer to the router and the laptop to router - no link
    -changed (tested) cable and router port - no link

    also a linux distribution installed with shows the installed NIC but his are not all RX or TX packets
    diagnosis with toshiba used cable connected - message was "cable can be damaged or not connected.

    all other tests I should try/run before going to the Service Center Toshiba for repairs, and how long they can hold my laptop for repairs - the whole motherboard must be replaced?

    Are you using 64 bit OS originally that you got with your laptop?
    Have you noticed this problem from the beginning?

    Card LAN listed and activated correctly in Device Manager?

    When you connect the LAN cable is green LED on?

  • F20-137: Bluetooth does not work if connect my mobile phone

    I recently bought a F20-137 for my son and when I hack with her at Christmas bluetooth apeared in configfree, but today I decided to try and connect my mobile phone via bluetooth and there is no bluetooth option in configfree where it should be according to the configfree help file.

    It's like bluetooth is not yet installed.

    someone knows how to solve the problem? I tried to look for drivers for my model of laptop bluetooth stack, but it was not available on the toshiba site and configfree versions I found on the toshiba site are and build older than the version already installed.

    Hello Luke

    According to the specification for F20 - 137 the unit doesn't have Bluetooth. To be sure to check if you can find the label of BT in the lower corner.

    It looks like http://support.toshiba-tro.de/KB0/FAQ35007I001WR01.htm

    Good bye

  • I can't connect the mobile phone as GPRS bluetooth modem

    MSI Wind U100 laptop (toshiba bluetooth module is built in)
    MS windows XP Professional SP3
    Toshiba bluetooth stack 6.30.01

    I can't connect the mobile phone as GPRS bluetooth modem. I tried to connect certain phones. But all the time the same problem:

    After finding mobile phone in the list of available devices, notebook coonects him. But at the same time, "coonecting COM 40 failure, try again".

    I've read about this problem in the user manual, but I am not understand, how to solve a problem.

    PS Sorry for my bad English

    I recommend you take a look at the next document if it has never worked before:
    "How to set up GPRS DUN via Custom Toshiba Bluetooth Stack Mode"
    You can find in the section "how to resources" from the following Web site:
    http://APS2.toshiba-tro.de/Bluetooth/

  • Satellite Pro 6100: Bluetooth - how to connect the mobile phone

    I already have a satellite pro 6100 with the bluetooth software on. I tried to connect to my mobile phone without success. The problem seems to be with the laptop rather than the phone.
    How can I connect successfully. I have to update the new drivers? I bought it refurbished 3 years ago and I'm just getting round to the use of bluetooth!

    Well, the Bluetooth software has been installed on your laptop, BUT the question is:
    Your group has installed Bluetooth card?

    AFAIK the Bluetooth is an option available on this unit. You must check the Device Manager and check the bottom of the unit if the Bluetooth label has been placed.

    I think that you cannot connect your mobile phone because BT is not available.

  • Satellite C660 - connection Wi - Fi problems

    Hello

    I have the Satellite C660 with windows 7 64 bit which continually lost the wifi connection. The problem has been compounded in recent weeks. It takes the point a is the only one to connect with a network cable.
    I updated the driver for the current version 1005.23.622.2011 without success. All our other laptop have no problem with the wifi connection.

    Can someone help with this problem of frustasting before I go out a buy a wireless dongle?

    Wayne

    Hello

    Have you noticed this problem with an adapter connected to your laptop computer or power supply battery only?

  • HP 750 055xt: clean install / desire / network driver problem

    Want to 750-055xt. Bought as a refurb. SSD is small, so I put more in and did a clean install with Windows 7 Professional.

    Internet - network driver problem does not connect and I see that the drivers are missing. I tried searching the site, but I can't find the driver.

    It's not a hardware issue because I can put the other drive and it works fine.

    I am struck an impasse with the search tool. I need to copy the driver on another computer to move.

    All of the suggestions.

    Thank you.

    Hello:

    Page for your model motherboard plug indicates that there is a CG-RTL8151GH-Realtek gigabit ethernet card.

    See if the W7 directly from Realtek driver works - 3rd driver on the list.

    http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=13&pfid=5&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  • Router C4780 wireless network belkin problem

    I have a C4780 which worked well for several years with at least 2 previous routers. I have a Belkin AC1800DB have changed recently and now unable to connect to the router (laptops are connected wirelessly to Belkin WPA2 network without problem).

    When I run a network of C4780 test report it says local networks are detected (including Belkin WPA2) but shoes FAIL against network name SSID found. Similarly the wireless Assistant from the installation disc, the list of available SSIDS for the connection is empty. C4780 both Belkin have WPS, but this does not work in mode button or Pin.

    Because the problem is to find the SSID for all networks I do not think that his associate Belkin (just strange that the problem occurs at the moment I change the router).  But as the C4780 connected perfectly to my previous router, that I do not understand why I now this problem of wireless network connection.

    Any advice much appreciated.

    Try this.   Configure the router to a wireless channel fixed as 1, 6 or 11, never 'auto '.   'Mixed' mode, try now.

  • Network Configuration problem

    Hello:

    Since last week, when I click on an icon, for example, the Page Home/Windows 7 does not come on the screen.  Instead, warning to appear at the top of the screen saying... Problem with Internet connection or Network Configuration problem.  After 5 minutes, or later, however, the screen came, but it is very slow to open web pages.

    This problem occurs most often during the night, however for the last two days, sometimes also during the day.

    Until this problem started out of blue, wireless connection with Comcast was very smooth-ride,... instantamously the homepage of popping up.

    Hints on this would be greatly appreciated.

    Thank you

    This sounds like a problem with your Comcast service. In the United Kingdom, I would suggest that you run a speed test on your connection speed. You can get no doubt do the same wherever you are. While it could be the quality of your line, the calendar offers it's the volume of traffic from when children arrive home from school until they go to bed.

    You could compare notes with other Comcast customers.

    http://forums.Comcast.NET/

    Hope this helps, Gerry Cornell

Maybe you are looking for

  • How to UN-restrict the movement of the regions to take

    The use of Logic Pro 10.2.3, I want to spend an excerpt from a plug to another track (which is not in the same folder to take). This is the procedure I use: Make sure the quick slide is off Cuts in the region to isolate the part I want to spend Drag

  • Upgrade to Vista Business downgraded to XP 7

    I recently bought a laptop HP Compaq 8710w comes with Vista Business downgraded to XP Professional. I ordered my upgrade kit, as I understand it will take to do me a clean install. My question is, I will receive a copy at retail of Windows 7, which a

  • Change LabVIEW code when executing

    Hello world! I'm quite new in LabVIEW and I have a question. If I change a code while it is running will there be problems? This code is a measure automation code, and I really don't want to screw up the measures. Thank you Edit 1: the code is in a s

  • No KeyPress triggered if the mouse button is held on the control

    Hi all I am trying to catch the outfit/auto repeating keyboard inputs at the same time I'm clicking on a slide ring switch, to change the direction of the slide of entry as a Shift key.  (actually, I would like to use the SHIFT key, but apparently no

  • 2d28ca: computer laptop hp 2000 drivers

    looking for drivers for the network controller (1) Please next, pci (2), (3) thank you sm bus controller device