Connection of a monitor HD Dell for Dell E310

Similar Questions

• Need help to connect the monitor to Dell Inspiron Dell

  I recently bought a laptop computer Inspiron 17R in order to reduce the use of my laptop Precision M6600. A Dell U2312HM monitor has been used precisely as a second monitor and I want to use with the Inspiron system newly acquired as a second monitor. The different video ports on both of these computers and I failed to get the monitor to work with the Inspiron. While the accuracy using an older VGA connection, the new Inspiron using a HDMI connection. To further complicate the issue, the monitor has several ports to connect to a source of video output, which includes the DisplayPort, DVI, VGA and ports for USB connections upstream and downstream, but not including HDMI. I used a DisplayPort to HDMI Cable adapter trying to to connect the Inspiron to the monitor, but could not produce an image on the screen of the monitor. This continuous monitor to answer correctly when it is attached to the precision via the VGA cable & port so I'm confused as to why I had no luck by attaching the monitor to the new system with the adapter DisplayPort to HDMI. How can the Inspiron 17R be connected to the monitor Dell U2312HM?

  Computer output HDMI cannot convert a monitor of DP (DisplayPort) using a straight through cable.
  What you have purchased is designed to do the opposite.
  Computer RFP out for monitor HDMI in

  Regardless of the port, you will get only ever 1920 x 1080 on the U2313HM. Return this cable. Buy a DVI HDMI to =.
  Computer output HDMI--> HDMI DVI--> DVI U2313HM Cable in

• How to connect an external monitor to a Dell Vostro 1500?

  What is required?  cables? See: the screen is black and the need to obtain files/photos to the computer.

  Hello

  You can connect an additional monitor to the laptop.

  To learn more about how to connect to an external monitor, please refer to: set up multiple monitors

  After the back if you have any questions.

• How to connect an additional monitor for the gateway all-in-one?

  Hello you all, I have a question I hope you a lot more smarter computer people can help me with. I have a friend who has a gateway all in one model #-ZX4931. It has a VGA port on the back. It has been also updated for Windows 10. I'm house sitting and dog looking for her in a few weeks

  I want to plug the additional monitor which by the way, it's a Dell (sorry) to work on a project I'am doing right now. I try to use the screen that she has on the All In One and I didn't like how my project came out looking

  I see on the back of its All In One, it has a VGA port. I Google several times and different words from Google, which told me that you cannot plug an additional external monitor for all in one PC, so I'm confused as to why there is a VGA port, if you couldn't plug the external monitor

  in any case, can someone please help me and give me details on how to connect an external monitor, in addition to its gateway all in one model #-ZX4931

  Looking at your specific model, I think you can try to connect an external monitor via the VGA port.

  Once you have connected the secondary monitor using the VGA port, press control + p and main Windows logo if you are able to extend or clone your desktop.

• Possible to connect an external monitor for laptop HP Pavilion dv4t-4200 CTO

  I have a HP Pavilion dv4t-4200 CTO Entertainment Notebook PC model # A1M02AV and it has a VGA, one port that resembles a cable port phone/broadband and one that looks like a USB port, but indented on each side down. I can even connect an external monitor? How will I know if I have more than 1 video card? In addition to the usual USB/headphone ports, I have not all ports. He says that my drivers are up to date... but I don't know even what I'm looking for. Do I need to install something or buy some kind of adapter?

  I'm trying to connect an external Dell montitor via the VGA port with a VGA cable. The monitor has power, but my laptop does not detect recognize them / it. However, when I plugged in the first time in, my laptop screen has shrunk in a square (vs the entire screen) so he acknowledged something... but nothing happened on the external monitor.

  I tried to detect through my display settings, but I have accidentally changed some display setting until the reception desk shows only 1 monitor, but not selected my real laptop screen or something or changed to be Monitor 2 (even if there is no monitor 1), so when I plug the cable into my laptop suddenly my desktop disappears and it's just a white background screen - and I cannot access the screen of the computer settings or whatever whatever... when the cable is disconnected this setting seems to be normal, so I can not understand how to fix it.

  Sorry, I don't know what I'm doing here - please help!

  Hello

  All Dell monitors are equipped with CD for the drivers. Your laptop may not know the monitor without its driver, it will not install automatically. Please check:

  Ringht click an empty space on the desktop,

  Click Customize

  Click on display

  Click on change display settings

  You can see the TWO laptop screen and external monitor in there, as shown in the following image:

  

  For the test, I put my Dell monitor is my main screen. If I can't see 2 monitors, you need its driver first and then check the cable.

  Kind regards.

• connection my heartbeat in my Dell XPS with Windows 8.1 connects not through they are paired

  Separated from this thread.

  I have a similar problem connecting my beats of my Dell XPS with Windows 8.1. They are matched with my computer, but it does not connect. Whenever I hit the button to connect, it just eventually times out. I made sure that my headphones are on and through this article to make sure that everything was set up properly, but in vain. They work great with all the phones that I've matched with so far.

  

  Hello

  Please contact Microsoft Community.

  I would like to know the following information so that we can help you further.

  • What is the model of the computer?

  Please follow the method below and check if it helps:

  Please, try the steps in below link by Nirmal S replied on 12 November 2013.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-hardware/after-upgrading-to-Windows-81-my-Bluetooth-device/bf6c7155-65CB-4874-B683-330e8bfbe9c8

  Also I suggest to install the drivers from the manufacturers website, follow the link below.

  http://www.Dell.com/support/home/us/en/04/product-support/product/XPS-12-l221x/drivers

  For your reference

  http://Windows.Microsoft.com/en-CA/Windows-8/why-isn ' t-windows-conclusion-device

  Hope this information was helpful and let us know if you need more assistance. We will be happy to help.

• Can I connect a Bluetooth monitor and bike cadence monitor simultaneously for 5 s iPhone

  Can I connect a Bluetooth monitor and bike cadence monitor simultaneously for 5 s (iOS 9.2) iPhone?

  Hi thepaulbarlow,

  Welcome to the communities of Apple Support! I'm sure we can help you with your question. In general, the iPhone should be capable of supporting multiple Bluetooth devices, as described in the following article:

  Manage the health data from multiple sources on your iPod touch, iPhone, or Apple Watch - Apple Support

  If you have any questions for matching one or the other device, you can find information and the steps in the following article useful:

  Get help to connect a secondary Bluetooth device with your iPhone, iPad or iPod touch - Apple Support

  See you soon

• HPE HP8 1360t DVI connections and two monitors

  I recently bought a new HP8 HPE 1360t directly from HP.

  I finally got around to get set up last night. I like almost everything about it, EXCEPT to try to figure out how to make it work with two monitors.

  Before buying, I contacted HP sales to confirm that this model could support two monitors in extended mode, which means that Office spans both monitors, giving me two times the workspace.

  I have two monitors (1908FP) Dell that I got as part of a severance package from my last job (Yes, I know what you think) and down them as two monitors with the office in extended mode. They have both connected via DVI to a MOLEX splitter. They seem to be of DVI - D Single Link.

  At the back of my new computer, there are three DVI ports:

  -one on its own and it is DVI - I Dual Link (photo below)

  -both grouped together and on the side. one looks like DVI - I Dual Link and the other DVI - D Dual Link

  When you configure the workstation I naturally just assumed to connect all the cables DVI mail of my monitors for each of the two DVI ports on the side. Nothing happened.

  I removed then each of them to test it on its own. Still nothing.

  Then I plugged into the port at the top, and it worked. But it has only a single port.

  So I went back and tried the other in each of the two and went to the panel display and but it does not recognize the second monitor.

  At this point I don't know what to do. They told me this computer supports two monitors, but I don't see how it's done if neither of the DVI low ports to work.

  Is there anything else I should do? Or have I not those who simply do not work?

  I am running Windows 7 family Premium 64-bit (Service Pack 1), Direct X 11, and the graphics card is GeForce GT 630.

  If it means anything NVIDIA control panel says my card and monitor are HDCP and it does not find the second monitor when I use setting up the functionality of multiple screens.

  I would be very happy for any help and advice.

  Thank you.

  Lee

  This model uses a card mother IPMMB-FM (Formosa). The built-in rear I/O below;

  

  (5) - DVI - I (digital and analog output) and DVI - D (digital only)

  When the computer is equipped with a dedicated graphics installed in slot PCIe x 16 card, this motherboard integrated DVI outputs are disabled. The only connections that you can use are those on GT630 discrete graphic card. This card must have at least a DVI and an HDMI output. Please post a photo of the back of your computer, centered on the graphics card. You may need to use a HDMI-DVI adapter to connect the second monitor.

  Please send Bravo

• HP touchsmart sleekbook 15 - connect an additional monitor

  I just opened my HP Pavilion Touchsmart Sleekbook 15 and I want to connect a 2nd monitor to stretch my office. I have a Dell monitor that I used for a year or two with a VGA connection. There is no standard vga port on my new Touchsmart.

  How can I connect it?

  Hello

  HP Pavilion Touchsmart 15 Sleekbookis a series of many models and their products, what is yours? The following (HP Pavilion TouchSmart 15 -b153cl Sleekbook) model only has HDMI port

  http://support.HP.com/us-en/document/c03685093

  That's why you need HDMI VGA conveter such of the following part to connect to the VGA monitor

  http://www.Jaycar.com.au/productView.asp?ID=AC1638

  Kind regards.

• Tecra Z50 - need to connect two external monitors

  I think to buy Tecra Z50, but one of the features that I need is the ability to connect two external monitors.

  Is it possible to have a monitor connected to the HDMI and a VGA (with computer laptop lid closed)?

  * Hi-speed III Port Replicator is not an option, because it is not available in my country (Croatia).

  Hello

  I don t think you will be able to connect two external monitors to this laptop using HDMI and RGB port at the same time because of different types of signals.

  The RGB/VGA port supports analog signal.

  The HDMI port provides the digital video output and when the external monitor is connected to the HDMI port the device is set to HDMI.

  > * Hi-speed III port replicator is not an option because it is not available in my country (Croatia).
  What of the Dynadock? Its an external device connected to the s for computer laptop USB port.
  It supports own graphic unit and you can connect to another external monitor such Dynadock 2nd.

• Satellite C650 - external monitor turns on for about 2 seconds

  Hey

  I want to connect a digital diamond (I think Acer) external moniter for my Toshiba Satalite C650 and it lights up for about 2 seconds then black flshes again. I tried to lower the resolution and 12 pins cable is tight it flashes just black. He never does on my TV...

  Guys do you have an idea what could be wrong?

  Hello

  What cable connection/use exactly to connect the external monitor?

  I would recommend the first connection cable before you turn on both devices. Then turn on the external monitor first, and then for laptop. Normally it automatically detects the external display. If this isn't the case, you can use the FN + F5 key combination to move from a monitor.

• Cannot connect HP ZR30w monitor to HP p6120a

  Plugged my new monitor to my PC with a VGA to DVI converter, but it won't work.  What happens and what else can I try?

  > connected my new monitor for my PC using a DVI VGA Converter
  What is a converter or adapter?
  VGA2DVI-D is always difficult.
  StarTech for example offers no:
  http://EU.StarTech.com/AV/converters/video
  
  You can update your graphics card or try a like usb adapter:
  
  http://www.EVGA.com/products/PDF/100-U2-UV19-tr.PDF
  http://www.Amazon.com/Kensington-universal-multi-display-adapter-black/DP/B002F9NSMQ/ref=pd_cp_e_1
  
  They will use your current graphics device.
  
  HTH
  C.

• How to connect the external monitor to Satellite T130-C17?

  It has a HDMI port on my laptop and I would use it to connect to a monitor...
  The monitor supports DVI and VGA...
  So I thought that buying a VGA-HDMI would do the trick...

  Unfortunately, when I plug it almost doesn t do something...
  I want to use the monitor as my monitor 3rd btw. That's why I want it on the HDMI port.
  The resolution isn't really a problem for me because I put t want to do something great graphics on it anyway.

  For me, it makes sense to use the HDMI Cable DVI and not to use the VGA port.

  This third monitor is a little strange to me.
  You want to connect two external screens/monitors to your laptop satellite?

• Connect a second monitor to ATI Radeon HD 5570

  Hi, I just got my HP Pavillion Elite PHE-360z and it works great so far.  My question is that I have two monitors that I would use with the card.  The first monitor is hooked up okay using the DVI connection.  However, the card has also 2 other slots and I don't know what kind of cables go inside.  Looks like it is HDMI and don't know what the other is.  I have a simple cable VGA to my screen else I want to connect to this card, but do not know how to do it.  Any advice would be appreciated!

  Tim

  This article should help you with the connection of two monitors.

  Another your monitor handles other types of connection next to the VGA?

  The video for the HPE-360z 5570 card has DVI, HDMI and Display Port.  You must also have a VGA to PC adapter.

  A Display Port to VGAshould get the VGA signal to your second monitor.  I have not tried this type of adapter.

• Connect an external monitor to an Equium L10-300

  Hello

  I wonder if someone can tell me how to connect a Viewsonic external monitor to a laptop Equium L10-300?

  I unplugged the screen and when I got to reconnect again I got a message "No signal input" on the monitor. I sent the manufacturers of screens that said I had to turn on the laptop, wait for Windows to load, and then press and hold the function key, while pressing F10. There is nothing! Before that, they said that I needed to press the feature key followed by the key with the monitor symbol F on it, it doesn't work anymore!

  Can someone help me out here?

  Thank you

  Jodie

  Hello

  The laptop supports a port external monitor (port/VGA RGB port).
  You need a VGA cable to connect the external monitor to this port of s for laptop.

  After that, use the FN + F5 key combination to switch to the external video output
  All that s

  If the buttons FN n t work then you must install the utility of the European driver Toshiba page shortcut

  PS: I assume you are using Win XP
  You can also do this:
  Right click on the desktop
  Choose Properties
  Has chosen the last settings tab
  Choose Monitor 2 and check extend my Windows desktop on this monitor

  Welcome them