Connection of device to USB device?

Similar Questions

• Portege M800-106 the system freezes when I connect a device via USB

  When I connect a device through a USB port, the system hangs. This happened with any device even something that has been used before. Example - if I turn on the printer /plug in my Blackberry to synchronize the .laptop just going so slow that I have to do a reboot with the devices still connected to get the system working again. Running Vista. Any help please?

  Hello

  You see yellow exclamation marks in Device Manager? Maybe a driver isn't installed properly in the system freezes.
  In addition, I would try to remove the USB ports in Device Manager. After this restart your laptop and USB ports will be recognized again.

  Have you tried a BIOS update? If this isn't the case, you should do it. Before you begin the update, close all running programs and make sure that you are logged on as administrator.

  Last but not least try to reinstall Windows using the Toshiba recovery disc. It only takes a few minutes and then you have settings to factory again! :)

• I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel

  I use Windows 7 on a computer to which a printer is connected directly by a USB cable.  I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.

  Can someone help me with this?

  Thank you.

  See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/

  If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1

• How to display the list of never installed or connected storage devices

  Original title: list of installed storage devices

  Is there a way to get the list of already installed or connected storage devices?
  I know that I can use USB and USBSTOR branches registry for these purposes. Is there something like that for CD/DVD, HARD disk drives?

  I guess the device driver installation and connection events are recorded somewhere, but I don't know where to find this information.

  Sorry for my English.

  Hello

  You can check the link provided below for more information on what information appears in Event Viewer in Windows 7.

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  To the event viewer Windows XP Click on the link below.
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx

• Unable to connect to Device Manager

  I just bought this Clip + 4 GB yesterday for my upcoming birthday, I connect the device to the computer and my device manager will only read my Clip + not at all. I mean not even a usb detection or whatever it is. I downloaded the firmware and put the unit in and it says please plug in device player. I looked in the device via a right-click Manager and selecting manage desktop and which does nothing, it displays the listed device, but how come it does not appear as being read by my OS. IM using Win XP SP2. I have not the slighest clue what Im doing, I spent all morning trying to read messages from the forum for help and couldn't get a direct output to get an idea of what I'm doing. When I plug the device on my computer using the USB of the msg on the screen says 'writing '. Unlike my USB key, I can just plug it into the computer and it will say new detected device.

  Sigh, worst comes situation that I might as well return to the store that I bought. It's really pathetic, I spent 4 hours trying to get this thing to connect. Too much frustration.

  If you react like your USB, go into the settings > system settings > USB mode and select MSC manually.

  Connected in this way your computer "sees" as a similar storage device. You can simply drag & drop files from your computer to the music folder (you will probably need to tell Windows to "uncover" hidden folders & files) on your Clip +.

• When you try to synchronize my gpx mp3 model MW240BU, wmp says connect a device. It is connected and has previously worked.

  I have a lot of space on the mp3. This problem occurs with other mp3s as well. I can listen to MP3 music on the pc, I just can't sync because of the command "connect a device".

  Hi cwettin11,

  1 - is the device recognized in Device Manager?

  Method 1:

  You can try to connect media devices into the other USB port and check.

  You can check the status of the device in Device Manager. You can also try uninstalling and reinstalling the device and check.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  (c) in Device Manager locate the gpx mp3, right-click on it and select uninstall.

  d. restart the computer and check.

  You can also consult the manufacturer of the device and install the latest version of the drivers.

  http://www.GPX.com/store/p/690-MW240BU.aspx

  Check out the link:

  Updated a hardware driver that is not working properly

  Also check out the link:

  Set up a device to sync in Windows Media Player
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-device-to-sync-in-Windows-Media-Player

  Method 2:

  As other Mp3 devices are not recognized, you can try to re - register the files related to Windows Media Player.

  To do this, follow the steps below.

  a. Click Start and in the start search bar type cmd, do a right-click on the command prompt icon in the box programs and then click Run as administrator.

  b. at the command prompt, type the following commands and press ENTER.

  Type regsvr32 wmp.dll, and then press ENTER.

  Type regsvr32 jscript.dll, and then press enter

  Type regsvr32 vbscript.dll, and then press enter

  Restart the computer and check if the problem is resolved.

  Method 3:

  You can also scan files (SFC) system auditor to correct all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

• My new Sony Vaio PC does not recognize my Sony Handycam DCR-HC19E model. I have no installation CD. How can I connect two devices, please?

  Previously, I had a Fujitsu Amilo PC operating Windows XP Professional. I had no problem with these 2 devices of connection. Now, I bought a Sony Vaio PC

  Windows 7 Home Premium and it can not recognize my webcam. I bought a cable iLink (hama), but without success.

  What can I do, please?

  Hello

  Method 1.

  Connect the device, run the hardware and devices Troubleshooter and check if that helps.

  To open the Troubleshoot utility equipment follow the given link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  You can also check the updates available for your computer.

  Method 2.

  Install a USB device: http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

  Refer.

  You need to contact Sony support to get the disc because it contains software of camcorder. You should also check the camcorder manual as it contains instructions to enable the USB setting in the camera for it to get detected in Windows 7 computer.

  The KB article for the Sony camcorder is:

  http://www.KB.Sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C499324&sliceId=1&docTypeID=DT_KNOWLEDGEARTICLES_1_1&dialogID=553948590&StateID=1%200%20553950910

  Hope this information is useful.

• Why the memo does not play on a connected Bluetooth device device?

  Why can't I read my voice memos on a connected bluetooth device?

  What type of Bluetooth device? What happens when you try to read this memo?

• Twinning/incoming connection unpaired device

  I found an "abnormal" behavior I describe below:
  . Connect a headset BlueTooth on your computer.
  . Once it has been done successfully,
  . Disconnect the device (headset).
  . Then, remove the device from the list of devices on your computer.
  . Now try to connect your device to your computer FROM your device.

  -Online PIN code is requested, but the profile never appears in the
  List of computer devices and the connection fails.

  No information on this issue?
  Is there a something to do to make it work?

  This was found on Toshiba BlueTooth stack 4.20.08 (and previous 3.0.3)

  Hello

  I use BT 320 Plantronics headset with my laptop and I can tell you just that configuration is very simple and finished in one minute. Since then, I simply use Plantronics shortcut on the desktop and can use the headphones without any problem.

  I put t know why I should remove device from the connections list. If I do that I have to configure the connection whenever I want to use.

  . Then, remove the device from the list of devices on your computer.
  . Now try to connect your device to your computer FROM your device.

  Sorry, but this way of using peripheral BT is for me unusual. When BT device on your laptop is enabled start Bluetooth settings and create the new connection. Every time when I want to use the BT headset, I do follow the steps:
  -Device of BT and activate BT on the laptop
  -Double-click on the shortcut created to BT headset
  -Portable contact BT and I must press helmet itself to establish a connection
  -After made this sound on the laptop are completely disabled and every sound produced on the laptop I hear BT headset only

  All that s! I can't launch connectivity BT headset JUST to center of notebook BT (BT settings double click on the BT symbol in the taskbar).

• Impossible to connect incompatible devices. Please update all obsolete devices

  I recently got the trio kit with two DM100 and the wireless controller.

  Linksys Easy Link Advisor (LELA) does not install the controller, but it could be manually installed with most of the features.  (under windows xp 64)

  For the moment, I get the error "failed to connect incompatible devices. Please update all outdated devices' when I try to link my areas named player1 and Player2 for mode of the game.  When you view the details they show versions of different firmware (1.7.3 and 1.23.31).  I tried to update, but they appear as completely redrawn in LELA.

  How can I force an update of the firmware? I did a search, and the help file has been of no use. There is also no download available.

  For the next gen of linksys acoustic equipment, how about a webconfig/telnet standard where I can set a static IP for the wired connections and wireless?  Finally, I hope to launch wireshark and see how it works, because the system is cumbersome in its current state.

  Basically, leave it turned on, connected to the internet over the weekend.

  Another user also mentioned:
  You can force the update to occur by using the Media Center software.
  1 open media center software
  2. the mouse on the window of the player DMP-100 and made right click for the menu
  3 select all to see the current version of the software and the option to update.

  I did, and it updated... eventually.  Took a day to the next (> 3 hours), and there was no feedback / recommended user that the command has been received/treaties/completed.

• Can connect ATA device wihtout VOIP provider

  Hello

  I want to connect two devices ATA SPA3102 and PAP2T to different countries by internet wihtout using the VOIP service provider. Appeal to other countries to the PSTN.

  Help.

  Check out this link

  BACK TO BACK

• Unable to connect new devices to the network

  I have a WRT610N which does not allow me to connect all devices to the wireless network. He is a recent problem I was able to connect new devices before. Devices on the wireless network, those who have been on the network are able to disconnect and reconnect. That new devices are excluded. Went through the admin screens to see if something is wrong, but can't find anything. Any suggestions?

  Disable wireless security all the and try to connect with any temporarily.  Make sure that the MAC address filtering is DISABLED.  If you can connect now to go back and add the security on.

• BlackBerry Smartphones connect my device - but it seems connected

  I KNOW I'm doing something stupid, but I myself round have twisted in circles now and can not find my way.

  My BB on my pc can see all the apps I have on my phone and he can see my purchase history, but told me to connect my device. Do I need to connect it physically? Surely not!

  Why would he not see my camera - give me a hand please!

  Thanks for this info!

  I don't know what is the error you get on payment options, but if you share these error code or a specific error message that you get when you purchase then we can try to help you, you can also change your payment options if you need.

  I think you should read this knowledge, that can help:

  KB28715 : How to install apps from BlackBerry App World, with the help of a computer system

  KB26621 : How to change the method of payment in BlackBerry App World for BlackBerry smartphone or BlackBerry PlayBook

   

  Good luck.

   

• Fusion 6.0.2 - cannot connect virtual device sound

  Hello

  I recently updated my system to a new Mac Pro (MacPro6, 1 - coffee can style).

  I have a pair of speakers connected to the line out on the Mac Pro, and his works very well under OS X.

  I use VMware Fusion 6.0.2.

  However, I feel a particular sound problem in all my virtual machines of Windows.

  When I turn it on, I get a notice indicating:

  Cannot connect virtual device sound because no corresponding device is available on the host.

  You want to try to connect this virtual device whenever you turn on the virtual machine?

  
  

  No Yes

  
  

  
  

  If I click No., I wonder what is new in an infinite loop.

  If I click Yes, Windows starts and the sound works, except that it comes out of the internal speaker on the Mac Pro, rather than the speakers on the line output.

  I have several virtual machines of Windows (XP, Vista and 7), and this problem affects all the.

  VMWare tools is updated in all virtual machines.

  All of these machines were copied from my old Mac Pro, for testing, I decided to create a new virtual machine from scratch.

  I used Vista because I had this .iso at hand.

  At the end of the installation, after installation of the VMware tools and all the virutal machine had no noise.

  Windows has indicated that his material is installed and the windows volume meter shows visually playback of sounds (this small sound level meter), but there is no sound will appear.

  After cutting this new machine virtual and going in the settings, I noticed that he had missed at what soundcard put out of SERVICE.

  I turned on and when I turned it on I got the same message and the same problem as all other virtual machines.

  I also tried to edit the .vmx to show sound.virtualdev = 'es1371'but this disabled sound totally.

  
  

  I'm at the stage of ideas.

  
  

  For any help or suggestion would be appreciated!
  

  Most Macs have built in the input device, so they list a 'internal' microphone as the default selected the input device. The end of 2013 Mac Pro is not a built-in microphone, so by default, it will show "no input device found. VM Fusion 6.0.2 does not seem to take into account the case where there is no device found entry. I consider this a bug, but you can work around it by adding any input device. For example, the "headphone" in the back the Mac Pro is actually a pair of entry. If you connect a headset, as what is delivered with an iPhone, then it will be displayed as an input device and the merger will stop at throwing the error.

  I hope that VMware solves this problem in an update.

• I use Dreamweaver CS4 and can no longer connect to Device Central - can you help me with this?

  I use Dreamweaver CS4 and can no longer connect to Device Central - can you help me with this?

  Device Central was interrupted on 23 April 2012.

  http://www.Adobe.com/products/devicecentral.html

  And replaced with Adobe Edge inspect CC (for subscribers of cloud)

  http://HTML.Adobe.com/edge/inspect/

  Nancy O.