Similar Questions

• HP Pavilion DPGEK44 Gaming: HP Pavilion Gaming DPGEK44 connected via the monitor HP Pavilion 24xw - no sound

  The sound on my laptop works fine until I connect it via HDMI to a monitor HP Pavilion 24xw.  Then the sound disappears.  If I disconnect it, the sound comes back.

  I tried to go to the 'Sound' of the control panel section.  There are two options:

  Realtek High Definition Audio speakers

  HP 24xw

  The default value is Realtek speakers.  When I use the test installation my laptop plays the sound test.  I've updated to the latest version of the driver.

  If anyone can help with why where the monitor audio disappears from my laptop?

  Thank you very much!

  Hi @Cat999,

  Welcome to the HP Forums!

  I understand that you have problems with your HP Pavilion Notebook DPGEK44 game, when you connect the HDMI cable to a HP Pavilion 24xw monitor. I'm happy to help you!

  Please try the steps in this guide, Troubleshooting HDMI screen and sound Issues.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope this helps!

• Connection between the monitor and the Studio 1458 laptop seems broken

  After happily using my Dell Studio 1458 for a little over a year, all of a sudden my laptop screen went completely blank (not black, but a sort of grey empty) when I started yesterday. I have reset several times, I let it run and I heard the sounds of standard Windows startup. Since I assumed the laptop worked again very well, and I plugged an external monitor. I am now using the laptop with this external monitor and everything except the monitor to the laptop works very well.

  I can still go to "change screen resolution" and see the laptop screen correctly detected by Windows. I can turn it on by selecting "extend these screens. I can also change the screen resolution on the laptop screen. It's the same kind of gray white whatever I do. Of all this I conclude, there is nothing wrong with the drivers: the more likely culprit seems to be the link between the laptop and the screen of the laptop. Unfortunately I ran out of warranty three weeks ago so I don't know what are my options here. I started to disassemble the laptop to see if maybe I could plug a cable loose once more, but I got cold feet at halfway when I remembered that I had saved not properly all my files.

  Any ideas on how should I proceed?

  Thank you

  Johannes

  This would mean it's time to start trying new parts - cable first.  If that does nothing, try a new inverter (if the screen is CCFL).  If it's backlit by LEDS, try a new screen.

• mouse acts weird on Windows 10 when it is connected to the monitor extern

  Hello

  I have a weird problem, when I connect my macbook pro to an external monitor. I am running Windows 10 Pro. The problem only occurs when I close the lid of the laptop. The mouse starts to act up, it applies random clicks. Have more strange is that it stops after 5 minutes or so do. However, if the cover is open and I'm working on two screens, then it is normally.

  Do you have an idea where to start go if I want to solve this problem?

  Thank you!

  You should probably ask at the Microsoft support site.

• Can I use to connect to the monitor external hdmi

  Can I use the HDMI port to connect to an external monitor while shooting video with my EOS 7 d? In addition, this monitor can be a 1920 X 1080 HD monitor? I would need to get a mini HDMI cable DVI, but want to make sure, that it would not harm the camera before trying.

  Thanks in advance!

  Hello HowardLane,

  Yes, you would certainly be able to use the EOS 7 d HDMI output to connect to an external monitor.  While a studio monitor is usually used because of their qualities of accuracy and calibration of color, any monitor with a HDMI terminal input would work.  This will not harm the camera.

• Need help to connect the monitor to Dell Inspiron Dell

  I recently bought a laptop computer Inspiron 17R in order to reduce the use of my laptop Precision M6600. A Dell U2312HM monitor has been used precisely as a second monitor and I want to use with the Inspiron system newly acquired as a second monitor. The different video ports on both of these computers and I failed to get the monitor to work with the Inspiron. While the accuracy using an older VGA connection, the new Inspiron using a HDMI connection. To further complicate the issue, the monitor has several ports to connect to a source of video output, which includes the DisplayPort, DVI, VGA and ports for USB connections upstream and downstream, but not including HDMI. I used a DisplayPort to HDMI Cable adapter trying to to connect the Inspiron to the monitor, but could not produce an image on the screen of the monitor. This continuous monitor to answer correctly when it is attached to the precision via the VGA cable & port so I'm confused as to why I had no luck by attaching the monitor to the new system with the adapter DisplayPort to HDMI. How can the Inspiron 17R be connected to the monitor Dell U2312HM?

  Computer output HDMI cannot convert a monitor of DP (DisplayPort) using a straight through cable.
  What you have purchased is designed to do the opposite.
  Computer RFP out for monitor HDMI in

  Regardless of the port, you will get only ever 1920 x 1080 on the U2313HM. Return this cable. Buy a DVI HDMI to =.
  Computer output HDMI--> HDMI DVI--> DVI U2313HM Cable in

• Dell U2413 monitor connected to the number of HP laptop

  Successfully, I connected my Dell U2413 monitor to my HP laptop and used as a large monitor screen.

  I understand that the monitor is not built in speakers, but when I run a video on my laptop, my laptop speakers do not work either.

  Can someone enlighten me as to why this is happening?

  You don't mention how the laptop is connected to the monitor, but if you use HDMI or DP, the audio is transported from the laptop through the screen. Then connect speakers to the audio output jack of green monitor. If you don't want to use it, go to the audio settings of the laptop and go back to the audio from the laptop.

• Satellite L850-1v0 - alert "Cable not connected" when external monitor OFF

  Hi all

  I have a portable Satellite L850-1v0.
  My monitor is an A.c.e.r X233H
  Windows 8

  I have the setting 'Disable the display' 5 minutes.

  However, when the laptop off the screen I get a small box that bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  If I connect the monitor to my other machine it turns off fine and do not show this message.

  How can I get the laptop to turn off the display correctly?

  Thanks in advance
  Richard

  > when the laptop off the screen I have a small box which bounces around the screen stating "Cable not connected". The monitor is connected via the VGA port.

  The message appears because the signal to the external display was interrupted because of the setting: turn the display off.

  > If connect the monitor to my other machine it turns off fine and does not show this message.
  I think that the other computer/laptop supports another graphics card and so this message does not appear.

  Satellite L850-1v0 support and use of the 4000 Intel HD Graphics intern, who is part of the processor Intel® Core i3 - 3120M and this graphics card shows these alerts

• monitor turns off not by the switch at the top. power cord seems loose at the back of the monitor. just need a

  I have a hp w2338h monitor, running Windows 7 and I am unable to turn off the monitor through the top switch. The power cord seems loose in its connection to the monitor. Do I just a new cord or something else is necessary?

  Thank you.

  Hello

  Try to push the power cord firmly upward.  It should not move when it is completely inserted.

  Try a reset of the monitor. Unplug the power cord from the monitor and hold the power button of the monitor for 30 to 60 seconds. Plug the monitor back in and it lights up.

• Connection of the Macbook Pro to 2 monitors Dell

  According to me, I've looked everywhere and can't seem to find the right adapter to connect my Macbook Pro (mid-2012) to 2 24 Dell monitors | E2416H at work.

  My Macbook Pro:

  OS X El Capitan

  10.11.5 version (15F34)

  15-inch, mid-2012

  Processor 2.6 GHz Intel Core i7

  NVIDIA GeForce GT 650M 1024Mo graphics

  Connectivity to Dell monitors is DP (DisplayPort) or VGA.

  I really appreciate any assistance that can be provided.

  Thank you.

  Reed

  Get two port to display the mini display port cables and plug the ends displayport on the monitors and the ends of mini displayport ports Thunderbolt on the MacBook Pro.

• HP laptop - 15-f233wm: external monitor connected to the HDMI port has video but NO sound

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  Ernie4576 wrote:
  

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  By adopting the option monitor MHDI PC/AV Pc mode will solve the problem, I use a unit screen color Samsung TYPE model / MODEL: C27F591FD (N).

  The device playback option on the care of the portable property are all set to default, Intel C27f591 display sound card works fine!

• HP w2207h monitor: HP monitor crashes if connected to the Mac Mini

  My w2207h monitor works fine connected to 2 computers. A Dell laptop connected with a cable HDMI and a Fujitsu PC connected with VGA cable. I spend between the 2 with the menu key of monitors and the function 'change the video input '. However, I just buy a Mac Mini and connected via HDMI but now, pass the VGA to HDMI causes the monitor to crash/power down. Even the light around the power button goes off and nothing works. To relight the monior screen, the only way is to disconnect the cable from power for a few minutes. The monitor works with an another old laptop connected via HDMI as doeas the Mac Mini connected to an old television set. I thought HDMI HDMI was, but this monior dislikes my Mac. Any ideas?

  Thanks for the information Dunidar. A long session, running tests with Apple confirmed that this monitor does not work with Mac Mini. The only solution was to buy a new monitor :-(

• The second monitor connected to the Satellite Pro A100 "disconnect" himself

  Hello

  I use my laptop - Satellite Pro A100 (PSAACE) - with a second monitor with no problems until I did an upgrade to Windows Vista. After installation, the second monitor starts to show problems, i.e. that works intermittedly. Every 5 seconds or so the monitor "unplug" itelf and caps again. I hear the (UN) plug sound when she did this and the two displays flickers during this period.

  Can someone suggest a solution to this problem?

  Concerning

  I put t know what can be the problem but it sounds like the connection problem. Make sure that the monitor is connected correctly. Also try to test it with another external monitor. Is perhaps the cable or connector defective.

• Tecra A10 - 1LL - connection with the external monitor

  Hello

  I have a problem with my laptop Tecra A10.

  When I connect to an external monitor to the laptop I have to manually switch the screens because external shows nothing. When I disconnect the monitor I have to pass the screens manually with FN + F5 because the internal display shows nothing.

  My old laptop (Tecra A9 (PTS52E-0E702NGR)) is the poster automatically whenever I connected or disconnected an external monitor.

  Anyone has an idea why the A10 light automatically as the old notebook? Maybe it's the only spot in the preferences of the display driver that I don't see right now. :-)

  Hi SilverWizard,

  What happens if you try to switch on the external monitor using the options of display driver, or that this combination of buttons don t work?

  As wrote Al - eX you must update tools from Toshiba to get the keys FN working again. Everything can be downloaded here:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  It's working now?

• Can I use the Thunderbolt on my Mac Mini port to connect external studio monitor speakers?

  I have a set of technical Pro monitor speakers that use Bluetooth to connect to the Mac.  However, I don't like the way they sound on Bluetooth, and I prefer not to use the headphone jack to hang them either.  Is there a a way to connect them using the Thunderbolt ports or USB ports?

  http://www.TPRO.com/collections/monitor-speaker/products/powered-Bluetooth-USB-s tudio-monitors-mb6000

  Here is a USB audio

  http://www.Amazon.com/GP/product/B001MSS6CS?PSC=1 & Redirect = true & ref_ = oh_aui_deta ilpage_o02_s00

  There are the dock thunderbolt which have audio connections as well as other ports too:

  http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/