Connection of unit 2.1.2 to 9.1

Hi all

We intend to improve our 2.1.2.1000 - 380 connection of the unit of MCS to UCS 9.1.

Current MCS server is MCS-7815-I3

I need to know the path I follow to upgrade.

Can I install the same unity version 2.1.2.1000 - 380 UCS connection, restore it from MCS & level to 9.1?

If Yes, what is the upgrade path it must jump from 2.1 to 9?

If not then what is the alternative?

Kind regards

No, you can not install nothing underneath 8.x on NGC
You upgrade to 7.x, and, is that you keep the upgrade up to 9, or you use COBRAS

Read the RNs for all info and upgrade guides, everything is on ORC

Sent by Cisco Support technique iPad App

Tags: Cisco Support

Similar Questions

  • MP3 player is not recognized by the computer, the unit will not charge and transfer of content said to connect the unit.

    Original tile: Mp3 player will not charge

    All of a sudden when I plug my MP3 into the usb port, the computer does not recognize the device.  It will not load and transfer of content said to connect the unit and it is already plugged.  The player will load on another computer.  The mouse that is connected works very well. Help!

    Hi LaurajmWR,

    Good to know that you are able to resolve the issue and thank you for sharing the information.

  • I have to cancel my membership, I connect from United Arab Emirates

    I spent an hour or more trying to cancel a subscription to my account and because I connect the UNITED Arab Emirates, one of the countries this cancel membership online through online is not supported. In addition the No phone or chat option is appearing and only this forum option.

    PLEASE ADVISE!

    Screen Shot 2015-08-19 at 3.08.19 PM.png

    In order to cancel the order, please contact customer service

    You can use: http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

    For more information on cancellation: cancel your creative cloud membership

  • For connecting the unit time zone difference

    Hello

    We have used CUC located in GMT + 2. But we have a lot of users worldwide who have access to their voicemail this CUC. Let's say a user who's in Washington (UTC - 5) goes to voicemail, then he gets a wrong time stamp. Difference is about 7/8 hours.

    What is the solution to locate the time settings while accessing voicemail. Or counsel for solving this problem. Thank you

    Hello

    have you tried to set the zone schedule corect for these in the configuration of the mailbox of the user.

  • Connection of the UNIT with CUCM integration

    Hello

    Can someone please advice me on the underside, I CUCM (PUB + 1 SUB) cluster and node stand-alone 1 CUC.

    need to know the best Cisco recommended configuration

    1.0 order of AXL servers (what should we put 0 - PUB or SUB)

    2.0 tftp and order serever CUCM under port, (PUB, order SUB) group settings

    Please advice

    Thank you

    Purna

    Axl Server always be PUB and SUB.
    Pub - 0
    Sub - 1

    TFTP server must first be Sub and PUB.

    Sub - 0
    Pub - 1

    This is the best way and the recommended method to configure / integration with CUCM with connecting the unit

    Sent by Cisco Support technique iPhone App

  • Satellite C55-B929 - unable to connect to the WiFi hotspot

    My laptop cannot turn into a wifi hotspot

    I want to know if there is a solution?

    It will be really useful. Several times I tried, but I failed

    You have problems to connect to laptop computer at a special WiFi hotspot or his is generally not possible to connect the unit to any WiFi?

    What private WiFi at home?
    You try it?

    Just a note: there is a lot of discussion on WiFi workarounds... and that's why I recommend you also check the category 'Wireless questions' here in the forum

  • HP Officejet 6500 A Plus E710n: HP connected connection

    I want to configure the printer on a Hotspot of Straighttalk. Is this possible?  Message of the printer is that it cannot connect to the network.

    Want detailed instructions, like what would be given to a newbee.

    Hello @rhousman45,

    Welcome to the HP support forums. I understand that you want to connect your Officejet 6500 has more on a Hotspot.

    This would be very similar to the printer connected to a wireless network.

    Follow these steps to connect the unit to your WLAN 802.11 wireless network.

  • How to connect by Satellite L300-110 to the TV?

    I'm sorry. Help me

    I have the Satellite L300 110.
    I want to connect to the TV.

    Is this possible?
    What should I do?

    Hello

    As much as I know the laptop supports only port external monitor (RGB port)

    You may be able to connect laptop external monitor using a VGA cable but no TV.

    There is no available port TV out then I guess you won't be able to connect this unit to the TV

    Good bye

  • How can I connect my Satellite L510 (no HDMI) to SMART TV

    Hi all

    I'm not very tech savy and have recently bought a smart tv. I'm trying to connect my computer to the tv.

    However, I don't seem to have a port hdmi on my computer. After reading the manual, I seem to have a vga port.

    Counsel on how to connect the 2 (what kind of adapters or cables, I'd need) is greatly appreciated.
    Thank you

    If your computer supports only the VGA port, you will not be able to connect the unit to the TV HDMI port s.
    In this case, please check TV ports and probably you could connect the laptop to TV s port PC (RGB) input (if available)

    I put t think that a VGA adaptor HDMI would work because it is not possible to send the signal (analog) VGA to HDMI (digital) signal.

    I think that you would need special converter, but these devices are not cheap

  • I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. Hard restarting does not help, neither do not connect the camera to MacBookPro. Any ideas?

    I just ran the last update for my iPad and now it just continuously reboots to the black screen with the Apple Logo. I left plugged in all night and still no change. Hard restarting does not help, neither do not connect the unit to aMacBookPro. When I do this, iTunes complains that it can not connect because the iPad 'expires '. Now it is disconnected, but I can't turn it off. Even close the lid will not extinguish it. Any ideas?

    Try the following. It seems yo may have to let the battery drain is completely:

    - iOS: do not respond or does not light

    -Also try DFU mode recovery mode post-test

    How to put iPod touch / iPhone in DFU "Karthik doodles."

    -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

    -Try a different cable

    -Try on another computer

    S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

    Shop Apple Store - Genius Bar

  • How to connect the Qosmio G20 156 to DTT2200 sound creative

    Can someone recommend the best way to connect my G20-156 sound creativity works 5.1 desktop theater DTT2200. This was connected to a PC so I think a card external sound would be via a USB port, but is this the best way and that model?

    Hello

    I put t know what cables and what made the 5.1 support desktop theater DTT2200 but the Qosmio supports headphones with S/PDIF out.

    I use the headphone jack on my satellite to connect the unit to the stereo.
    I use a cable with a connector on one end and RCA connectors (red and white) 2 on the other end of the cable.
    The two connectors, I connected to HiFi and taking helmet.

    I think you can also try to use the same way to connect external speakers for the Qosmio.

  • Motorcycle G USB to PC connection problems

    Hey there, for a few days, I have my motorcycle G 2nd GEN (XT1068) and it has been working fine until recently. Today I tried to connect the unit on my Windows 7 PC via the supplied USB cable to transfer files, but it seems like a no-go. I installed the Motorola Device Manager, but the PC is still unable to recognize the device. Both in MTP and PTP mode. It is said that is a driver for XT1068 is missing or that of MTP/PTP. I downloaded some kind of package to PSG by Microsoft support, but it does not solve my problem. In addition, Windows does not automatically find the drivers. Activating USB debugging in the options of developer mode makes no difference. Any help would be appreciated.

    Thanks for posting back. This is something that you would never think to look.

    If you can mark your solved answeras or respond, it may help someone else.

  • Linking only to 10 Mbps Gigabit network connection

    T61 765 - C29

    Intel 82566MM Gigabit Network Connection

    With wired ethernet connection the unit should only connect at 10Mbps (according to my Linksys hub).  Even my old T41 (as well as all the other PC on my network and the hub, including using the same port), connected to 100 b/s!

    I looked at the device settings and it came with "autodetect" to "link speed & duplex.  I tried to substitute and set it to 100 Mbps, but then it would not be to 'talk' to everything, even after a reboot.  The driver version is 9.7.251.0.

    So for now I use my connection (54Mbps) wireless.

    Any ideas on how get the 100 Mbit/s active / work?

    Jon

    Check your Ethernet cable for continutity on all eight wires.

    Gigabit Ethernet requires all drivers 8 to be continuous between the two ends, otherwise the Ethernet connection at both ends will automatically return to a lower speed.

    See you soon,.

    Bill

  • BlackBerry Smartphones cannot connect to the device during synchronization

    Hi, first of all I'm new here so if I ask a question who responded... Sorry... could not find when I tried. ;-)

    I have a Bold 9000 with Desktop manager 4.7 and Vista SP1 on my desk.

    When I try and sync Outlook it gives me the following message... "unable to connect to the device. Please make sure that the device is connected. I can display media files etc in the Office Manager, but fail to synchronize? any ideas?

    Thank you

    Connect the unit to a main usb on the back of the computer and try again, let me know.

  • Sony MW600's should be connected to my computer laptop windows 7 but does not work as it should

    I got a bluetooth headset MW600 from Sony that is working well for my mobile. Got a Dell Studio 1558 laptop

    with windows 7 (64 bit) OS installed.
    I was able to connect the unit to my laptop after some teething problems, but once connected, when I try to play music
    (WMA or VLC or REAL etc.), he plays on the laptop speaker. Funny thing here is that it works as a remote control, (able to play
    and pause, etc. to the front using the bluetooth headset). but is not playing music in trendy on headphones.
    Need to mention when he connected first of all, I got a message like "not found driver" for the bluetooth for windows device.
    Then I tried to update the Microsoft Bluetooth Enumerator and got the message as "Best driver already installed" which is
    funny to me, since it is a driver of 2006.
    I 'google' suggestions and found a driver 315 MB from a source as 'Marked' as 'Fixed' in another Forum
    but I don't want to go unless I have no other options.
    then you can suggest me good info that would help me.
    PS: Please don't suggest not all Web sites of information for me, since I worked for the technical support for 3 years as well
    I know, how information 'google' or 'bing', but just let me know if there is another way to solve this problem.

    I got a bluetooth headset MW600 from Sony that is working well for my mobile. Got a Dell Studio 1558 laptop

    with windows 7 (64 bit) OS installed.

    I was able to connect the unit to my laptop after some teething problems, but once connected, when I try to play music
    (WMA or VLC or REAL etc.), he plays on the laptop speaker. Funny thing here is that it works as a remote control, (able to play
    and pause, etc. to the front using the bluetooth headset). but is not playing music in trendy on headphones.
    Need to mention when he connected first of all, I got a message like "not found driver" for the bluetooth for windows device.
    Then I tried to update the Microsoft Bluetooth Enumerator and got the message as "Best driver already installed" which is
    funny to me, since it is a driver of 2006.
    I 'google' suggestions and found a driver 315 MB from a source as 'Marked' as 'Fixed' in another Forum
    but I don't want to go unless I have no other options.
    then you can suggest me good info that would help me.
    PS: Please don't suggest not all Web sites of information for me, since I worked for the technical support for 3 years as well
    I know, how information 'google' or 'bing', but just let me know if there is another way to solve this problem.

    Two things:

    (1) make sure you have the best/full software driver for your Dell internal bluetooth device.

    2) go into the sound control panel and change the playback to bluetooth headset device.

Maybe you are looking for