Connection Officejet 8500 for Apple AirPort Extreme

I have on two devices.  The airport has a network running running.  I plugged the Officejet 8500 at the airport with a network cable.  When you open AirPort Utility, he does not see the printer.  When you use the printer menu, I was not able to find the right method of connection to the network.

No, you can use (and use) Ethernet.  It's just that Airport utility didn't report it because it is not plugged into the USB port, which is good.

Now that the printer is connected to your network, download and install the latest version of the software for your printer from the "Support & drivers" link at the top of this page.

Tags: HP Printers

Similar Questions

  • Presario 2175US not able to connect to the radio after installing Apple Airport Extreme router

    Hi all.  I have a Presario 2175US portable computer that is running Windows XP SP2.  The wireless adapter is a Broadcom 802. 11b / g WLAN adapter.  We have recently installed a router Apple AirPort Extreme in our House, with a network WPA2 key, and while the wireless network is visible on my laptop, when I try to connect, it tries to connect for about 90 seconds, but fails.  Unlike other laptops that we have, it does not ask me to enter the network key before trying to connect.  If anyone has a solution to this problem, I would be very grateful.  Thank you.

    Thanks for the comments, Paul.  I am pleased to say that the problem was solved after I installed the Windows XP SP3.

  • Photosmart more B209a-m does not connect with apple airport extreme base station

    I use the B209a-m wireless with a netgear router OS6.  I just changed the Netgear to an apple Airport Extreme router.  All my other hardware connected successfully with the new router but the B209a-m says "no connection found."  I know the printer is well within the router.  I have reset the factory settings on the printer.  I've disabled the system and restarted.  None of this has worked.  Suggestions?

    Hello

    You should not connect it to the airport.

    You must connect the printer with a USB port on your Mac, then run the HP installation wizard.

    From there, you will be guided to provifde the details needed to establish the connection between the printer and Airport Extreme wireless.

    Once the process will be completed and set up the wifi connection you will be guided to unplug the USB.

    You must use a USB cable high speed standard, not longer than 2 m in length.

    The square end must be connected to the USB port located at the back of the printer:

  • Purchase of 3rd Apple Airport Extreme Base Station

    My current 2 Apple Airport Extreme Base Stations (the two 5th generation) are implemented as shown in the screenshot below.

    My fiber service (80 MB/s) is hard directly on an Apple Airport Extreme Base Station plugged into my home office (via an Ethernet cable that connects from the box of fiber on the outside wall of my house to this AE).

    While AE is hard wired to a 2nd AE in a separate building in my back yard (via an underground conduit of PVC).

    Wired connection that's not a separate Ethernet cable.

    Instead, my provider of fiber spliced in an existing telephone cable that already existed.

    Currently hard connected directly to that 2nd AE in the building separated (via Ethernet cable) are the following:

    My Dell Precision Tower 5810

    My Canon imageCLASS MF6160dw (all-in-one)

    Printer color of my Epson Stylus Pro WF-5190

    (Suite after screenshot)

    I am replacing a very old 30 "TV Sony with a 60" LED Smart TV & want to run an Ethernet cable from the AE 1st in my home office to the living room where will be the TV.

    My intention is to add a Roku at the same place than television.

    In addition, I want to increase my wifi signal in the room.

    I know that the Express is 1/2 the cost of the extreme, but will most likely go to the extreme. - If the extreme will give me faster speeds for my Roku and TV.  In addition, I like to have the additional ports available if I ever sign anything else.

    My fiber Service is 80 MB/s Up & Down, but I regularly receive about 96 +.

    80 MB/s is no longer offered by my supplier of fiber, but I'm grandfathered in.

    The available speeds are now 45 (?) with the speed of 100 Mbps.

    I think I'm really on 100 Mbps service.

    QUESTIONS :

    The 2nd AE has been "extended" EI from 1.

    Just as "extend" the 3rd AE?

    For speed best / highest in the living room, the most recent AE should be in the living room next to the TV & the Roku, or he would replace the 1st AE who is in my home office since it is one that is connected directly to the box of fiber on the outside wall of my house?

    Other recommendations will be greatly appreciated.

    The 2nd AE has been "extended" EI from 1.

    Just as "extend" the 3rd AE?

    Yes, either by connecting to the extreme 1... recommended, if possible... .or extreme 2nd... If it is not convenient to connect to the 1st.

    For speed best / highest in the living room, the most recent AE should be in the living room next to the TV & the Roku, or he would replace the 1st AE who is in my home office since it is one that is connected directly to the box of fiber on the outside wall of my house?

    Locate the extreme new... which has a much better arrangement... wireless antenna where it provide the most benefits to nearby wireless devices.

    Otherwise, you might want to consider renaming your airports, because the current device names far exceed the recommended length name a 26 characters max, including spaces. Keep the name short and simple wireless network as well... and to avoid special characters in the name... as an apostrophe, a sign dollar, asterisk, etc..

  • ARE remote with Apple Airport Extreme router wireless

    Hi all! I'm controlling my DA5800 STR using the Remote ES app but neither my iOS device sees the receiver OR my Sony Android Tablet S. So I figure it must be the network set up. I use a cable modem Motorola connected to an Apple Airport Extreme via an ethernet cable. The receiver is connected to the router, as shown in the manual.

    I'm doing something wrong here?

    Thanks in advance for any help!

    Hello Sandiegodom,

    Please check the network settings on the receiver ARE and confirm that the 'external control' is active, as well as the "relief network" that will allow the application ARE the 'waking up' the unit from standby mode.

    Also check that your phone is connected to the same wireless network, and IP addresses of the phone and the receiver are in the same subnet / IP Range. UpNp must also be enabled in the settings of the router.

    If you have verifed that these settings are correct, then the question is perhaps with the router where it does not send data to the local discovery of uPnP network devices. A simple power reset or resetting the router will sometimes force the router to send back data and should fix the problem if that is the case.

  • SG300 combination with Apple AirPort Extreme

    Hello

    I recently bought a SG300 series switch. I want to connect my internet connection in a port of the switch and connect my Apple AirPort Extreme in the switch. So I want that all my other ports on the switch to be put to rout by the airport. Connection Internet and airport to the switch gives you access to the Internet for all wireless clients connected to it. But no switch ports can ping from the airport.

    How can I configure this as simple as possible?

    What I've done so far is to switch the L3 and nothing else. With nothing has changed from the default settings, I was expecting unrestricted access between ports, but appears not to be the case.

    It's my first time, so I expect that it's probably a simple problem.

    I hope someone can point me in the right direction.

    Thank you in advance.

    FR. Lars

    Lars salvation,

    I don't know what is the idea behind connection WAN and LAN to SG300. Is it because you have a single switch, but would need two?

    Also I am not aware how the airport works. Not NAT?

    To add a static route you must navigate Configuration IP--> IP--> Routes IPv4 interfaces and management

    Destination must be 0.0.0.0 IP prefix also 0.0.0.0 if this static route so to access internet.

    Kind regards

    Aleksandra

  • HP Photosmart C4795 with Apple Airport Extreme Wireless router - cable PC problem

    Hello

    I searched, but I can't quite find an exact match for my problem.

    I have a new HP desktop computer running Windows 7, and I attach it to my wireless router which is an Apple Airport Extreme.  I have attached my HP C4795 printer to the USB port on the * router *.  In theory, the USB key should pass through, so that the office will think it's a printer "connected", while also allowing us to print remotely from our laptops (via the router).

    Unfortunately, while portable computers can print wireless very well, the * office * Guard 'lose' the printer, thinking that it is in offline mode.  Even when it shows 'online' (after my relocation via "Add a printer"), still error-out print jobs.

    Can someone help me understand how this works?  The printer works fine, btw, if I disconnect the USB cable between the router and plug directly to the PC, if it isn't something directly with the printer or the desktop, but rather the * combination * of running through the Apple Airport Extreme router.

    Thank you

    Terry

    Thank you, once again, Jim.

    I think I have stumbled on the solution.  I did a reading online on Apple application 'Hello', and how he felt necessary for Apple devices, like the airport, knit with device sharing.  I forgot that the installation of the airport disk had said something Hello installation, but I discovered on my Wired HP Win 7 PC menu programs, called 'Hello Printer Utility' or something, and I launched it, selected the C4795 in the dialog box, and all seems to be put in place (i.e. the printer suddenly showed as 'online' and I could print from my desktop wired as well as wireless laptop).

    Success!

    Thanks for all your help on this.  Now, all I need is to get my WD My Book external/sharing the hard drive to work as well!  Unfortunately, I do not see here a "Hello Hard Disk Utility", but I feel somehow that morning will be the answer.  I just understand it.

    Thank you

    Terry

  • Apple Airport Extreme and new FIOS router - problem

    Hello, I have an Apple Airport Extreme 802.11n base station, which worked well with a Comcast router.  When you set up with Comcast router, I set the router to comcast to bridge and the Airport Extreme has done all the work as the main router. When I switched to Verizon FIOS today, I get the typical mistake of NAT double (that I did with the Comcast before configuring the router to Comcast to bridge).  However, the tech support guy FIOS said that was not an option, so he set up my Airport Extreme in bridge - router off mode mode.  This really live to the top incoming access using SSH, Timbuktu or the Apple screen sharing, given that I can't assign fixed IP addresses to the computers on my network and can not use the Airport Utility Network Port settings to open "pipes" for a particular computer.  In addition, I'm more comfortable using Airport Extreme, rather than things FIOS. Someone at - it other than enter Comcast suggestions?

    I did a search and didn't see a post on this in the discussion forum.  Thank you

    What is the brand and model of your router Verizon? Verizon provides you with administrator access to it to allow you to make changes?

  • WAG160N and an Apple Airport extreme

    I recently bought an Apple Airport extreme, and in order to use the guest account, I need to disable DHCP and NAT on my WAG160N settings and allow extreme settings. Otherwise the extreme is in bridge mode and therefore doesn't let me create a guest account.

    Could someone tell me please what settings I need to change in the WAG160N so that it acts as a modem only and not a router.

    Thank you

    You can't disable NAT on the WAG unless you go to fashion of the bridges, which means that it becomes a simple modem. You cannot use the wireless on the WAG, nor anything else. In bridged mode, you configure Airport Extreme as main router connecting to PPPoE (or whether you need from your ISP).

    Switch mode bridge on the main configuration page.

  • How to connect the keyboard for apple tv wireless?

    How to connect the keyboard for apple tv wireless?

    If you mean the 4th generation new Apple Tv, you cannot currently. It does not support keyboards at this time.

    If you mean the 3rd generation Apple Tv:

    Use a keyboard Apple Wireless with your Apple TV (2nd or 3rd generation) - Apple supported

  • Lost the power supply for my airport extreme!

    I lost my power cable for my airport extreme (House move!) where can I get a new one?  Online?  Thank you.

    Is your AirPort Extreme in shape as a 'tour', or you have one of the old versions "flat or square"?

    If you have the version "tower", a standard power cord "of eight" of any place of e-procurement would work very well. Radio Shack stores usually have in stock... but they probably won't have white.  Take the airport along to test fit in the store.

    If you have the old version of flat or square, you will need to purchase food and the power cord as a unit. Better go online for this.

    http://www.Amazon.com/genuine-EADP-20BB-supply-Airport-extreme/DP/B00AAQ3JE8

  • HP OfficeJet L7780 802.11 g - why it cannot find my Apple Airport Extreme?

    I bought a HP officeJet L77380 all-in-one printer/fax, etc. It is designated in 802.11 g I turned the radio network / wireless 'on '. When I choose Network/Wireless Wizard I get a rotating cursor and the message «Search» router wireless... "and he never finds anything. "I chose my Airport Extreme Radio Mode Setup: 802.11n (802. 11 b / g compatible). It still does not work. Help! And a Happy New Year in this Discussion Forum.

    I downloaded and reinstalled the current driver.  It works fine when it is connected to the Airport Extreme, even via an ethernet cable.  I posted this to the talk of HP and they told me to contact the Apple Support! (this shows how useless this company may be!).  I also spent an hour on the phone with HP support and it turns out that they put me thro' for their expert XP and there weren't available Mac technicians.  Well - it's Saturday night!

    Just to be clear, you're saying your L7780 is unable to discover your network wireless printer Wireless Setup Assistant?

    BTW - I run a 802.11n Airport Extreme wireless router at home and my HP wireless printers work fine.

    I would like to see the report of internal connectivity of the printer.  Press the < configuration > and <># keys simultaneously.   Analyze the report on a memory card, copy it to your PC and post the image here.

    The connectivity report will give me details about your wireless network and the networks in the region.

    Also, what other wireless devices you have connected to your network?

    Best regards / Jim B

  • How do you connect a (very) old Apple Airport Express to a new Airport Extreme network?

    For Bob Timmons:

    I have 2 old airport expresses, an old and one even older. The network home fled the old Express (connected to a modem), who abandons the connection several times a week. The older Express seems quite dead. What I want to do is to increase wifi coverage in my house (no wifi in the kitchen or the 3rd floor). I buy an Airport Extreme to manage the network, hoping that it would provide wireless coverage in my blind spots. Then I could use the former, Express work next to my stereo to listen to the music of my iMac.

    However: the new airport utility shows but does not interact with my work Express. If I buy one extreme and put in place, how I can add the Express network. I downloaded 5.6.1 (and launcher) Airport utility, but don't know if I can use 6.3.6 to implement extreme and 5.6.1 Configure Express.

    Any thoughts on this would be welcome.

    Sorry, I forgot to ask: even if the Airport 6.3.6 utility on the iMac refuses to 'see' the Express, would be the iPad method you mentioned work with an older Express?

    The model numbers of my expressed are:

    work: A1084

    a death: A1264

    Well, if A1264 is dead, it is the end of the discussion on this model.

    A1084... assuming it works... could probably be used for AirPlay, but the A1084 calls this AirTunes.

    The A1084 is at least 9 years old, probably older and the average useful life of an AirPort Express is about 3-4 years. It is amazing the A1084 to work at all, but school drop-outs you see now with the Express indicates that it is heading for the South, he may not be around much longer.

    If you want to try using the A1084 Express, it can be implemented and administered using an older version of AirPort 5.x on a Mac or a PC utility. No matter which version of AirPort 6.x...or.. utility. AirPort on an iPhone or iPad utility may NOT be compatible with the A1084 Express.

    If you are considering a new AirPort Extreme... and... or buy at Apple, so you have one day 14 return privilege on the product, if it will not do what you want, you can return it for credit or a return.  The older A1084 expected to collaborate with the new AirPort Extreme if you spot a version 5.x of AirPort on a Mac or a PC utility to configure the product.  But... saying "should work" is not the same thing as saying "work"... then it will be one of those moments where you won't know how well... or even if it will work until you try.

  • Can't the connection time machine to my airport extreme

    Initially we have only got a PC and got the AirPort Extreme Wi - Fi.  We now have a Mac and I can get the WiFi to work with the extreme but I can't get the backup part to work.  I don't know if it's because we already have a network in place or not, but when I enter Time Machine my Time Capsule is not appear:

    I need to create a new network?  I'm just very confused and would appreciate your help.

    The names which assigns Apple can become confused. For example...

    Time Machine is a Mac software that is used to back up data on the Mac on another hard drive.

    A Time Capsule is material... specifically, it is a router wireless ( AirPort Extreme) that has a built in hard drive that can be used as a destination for the backup.

    The AirPort Extreme is material... specifically, it's a wireless router only... but a hard drive can be added to a USB port on a new version of the AirPort Extreme to create a destination for the backups. If you do not have the new AirPort Extreme... (it has the shape of a tower)... you must have a separate USB hard drive connected to the AirPort Extreme, if you want to save the files on your Mac.

    Thus, in order to go in the right direction at the beginning, should first confirm if you have an AirPort Extreme... who's a router only... or if you have a Time Capsule... who's an AirPort Extreme with a built-in hard drive.

    On your Mac, open Finder > Applications > utilities > AirPort Utility

    Hold down the option key when you double click on the image to your Apple device

    The model you have will be displayed

    What is it?

  • Apple Airport extreme

    Windows 8.  Airport Extreme 4th generation.  Extreme is connected and running, but the Airport utility is not open.  Message is «You need Service Pack 1 Windows 7»

    You can check with Apple and see if they have a package updated for Windows 8 Airport utility

    I hope this helps.

Maybe you are looking for

  • My speakers to ear crackling.

    So I got my phone on 21/09/11 local verizon store. He developed a bad crackle inside the ear today. Volume was about 60% its never been used at max volume because it was strong enough. Now the crackling because his inferiors and 100% flight remain di

  • More then 10 to an array of integers

    Well, I want to do the following... I have a number (more great then 10). Suppose I got number 4327 now I want as fast as possible to change the figure at a table with the values [4,3,2,7]. I thought that one of the solutions (which is possible also

  • Update.inf and crypotographic service error when executing Windows Ipdate service pack.

    Original title: Problems with SP1a and SP2 update.inf... Help, please Currently the computer that I am trying a SP1 is installed and it won't let me install SP1a or SP2... I have to do before installing SP3... both the SP1a and SP2 gives me an error

  • Popup of Z10 disable BlackBerry asking to install BB link connecting to USB port car Z10

    Hello my car has a built-in USB plug that I use to load my Z10. Unfortunately, as soon as I connect the phone a dialog box appears on the phone asking to install BB link - which is obviously not possible. There is a button to close the dialog box, bu

  • FlexVPN: How can I tell my guests to use VPN?

    Hello I created a site to site VPN using FlexVPN between two hosts. I can see the VPN is established, I can end to ping. However, when I ping to - end through loop fixes which I set up for my test host. I don't see this traffic through the VPN. Traff