Connection persistent abandonment on Tecra R10 with 3G integrated modem

It of all the day repeating abandonment of the wireless Internet on my Tecra R10 Win7-32 running.
The Wireless Manager detects the full signal all the time and the failure is repeated according to almost regular pattern each time take a minute or two and cela seams occurs only when the modem is idle and never during downloads.

Does anyone have an idea?

Hello

Can you tell me where you are? What operator do you use?
You are able to test the remote connection instead of via the Wireless Manager? Same problem?

Dialup Howto:
http://APS2.toshiba-tro.de/KB0/HTD9C02RX0001R01.htm

Tags: Toshiba

Similar Questions

  • BIOS update failed on Tecra R10 with Windows7

    Hello

    I have problems with the update the BIOS of my Tecra R10J. The current version is 1.4, and I want to upgrade to 3.0, so I downloaded from the Toshiba web site the good file named "P006Cv300.exe" 2009-11-04 released. It is an update of the BIOS online in a real session of Windows 7. Simply right click the compress exe, click Run as admin and that is all, but... for me, he said:
    * "[Error] the start of the service was abandoned. The user doesn't have administrative privileges. "

    See below:
    http://perso.Orange.fr/100Mo/bioserror.jpg

    I tried with:
    -closed AV, firewall, etc...
    -turn off UAC
    -Run as administrator
    -Tried with another admin account
    -Safe mode (update of the bios doesn't support safe mode)
    -lead the local administrator session

    No change. Always the message "user lacks administrative privileges."
    Need help please, found nothing on Google (similar but not resolved Bios problem!)

    Thank you

    Hey ignore them,

    As Akuma has already written the added value Package must be installed for BIOS update for the BIOS to read system information correctly. Besides, the VAP is needed for special functions such as the FN keys so it must be installed.

    It would be interesting to know what is happening with the factory settings. I guess that your computer laptop wasn t ship with Windows 7, but with Vista and you should try it with Vista.

    Welcome them

  • Tecra R10 - Summers - you happy?

    Hello

    I think buying a Tecra R10 with integrated graphics. I read a few reviews on the net, and they look quite good. However, I want the user experience of the users of the real world.

    Are you satisfied with your Tecra R10?
    It runs too hot?
    The build quality is as good as Toshiba sells?
    How about the screen?
    No other complaints?

    Finally, it is easy to open for cleaning?

    Thanks for your help!

    I set a place for a friend and had a play with it for a few days, and I am very impressed with the R10.

    Are you satisfied with your Tecra R10? Yes, the performance and the quality is amazing (this is the SSD model so the start time are blistering fast :))
    It runs too hot? No, the CPU base and effective magnesium keeps cool.
    The build quality is as good as Toshiba sells? The build quality is similar to my Tecra A9, which feels solid and well designed, quality of the materials.
    How about the screen? The screen is a new type of LED, which has the better contrast than normal FL Tube screens. I am satisfied with the picture quality.
    No other complaints? Honestly I can't think of a thing wrong with it. I think to buy one myself.
    Finally, it is easy to open for cleaning? There is a door on the base of the laptop where you can access and clean the radiator. I wish my Tecra A9 had this feature.

  • Where is the location for SIM in Tecra R10?

    How to install or change 3 G SIM card in Toshiba Tecra R10 embedded 3 G Modem?
    Where is the SIM card slot?

    Thank you best regards &,.
    Rui

    Hi mate

    Not all units of Tecra R10 supports the 3G module!

    Which Tecra R10 - xxx you have exactly?

  • Tecra R10 - TrueSuite Access Manager doesn't work with IE8

    Fingerprint software does not start after you install Internet Explorer 8 in my Tecra R10 TrueSuite Access Manager stops working that is when I open a site that requires the login/password.

    I've updated the TrueSuite Access Manager to the latest version 2.5.28.0 but the problem remains. From the console to access the password Bank Manager the program stops responding.

    Operating system: Vista Bussiness 32 bit
    Internet Explorer: 8.0.6001.18702
    TrueSuite Access Manager: 2.5.28.0

    Does anyone have an idea of the problem?

    Thank you.

    Hello

    Have you tested with IE7?
    Did this happen using the preinstalled Toshiba OS and Windows with IE7?

    If this n t happens using the IE7 while there may be a compatibility issue between the two parties; IE8 and TrueSuite Access Manager.

  • Tecra R10 - 10W - crashes with the nVidia display driver

    Dear Sirs,

    Two days ago, I bought my new Tecra R10 - 10W. I used the recovery disk to put Windows XP.

    However, I get a blue screen randomly. I turned on the 'Check' tool and I got: error of e/s in wmiaci.sys system. Error 20th in B9B8752F. I figured that the nVidia driver and uninstalled it. The problem disappear. But when I try to install on your site the appropriate driver: display - 20081110130507.zip the system blocks blue with the same error.

    Please help me.

    Hello

    Which is really strange, buddy

    Hmm, I think that before installing the display driver you must clean your system using CCleaner. This freeware tool removes the old driver files and cleans up the registry. Then, restart the installation of the laptop the latest driver on the official website of Toshiba.

    Furthermore, you also update the BIOS? You can find it on the Toshiba site too. :)

  • Tecra A10 with Intel WiFi 5100 running Vista 32 bit fails to connect WiFi

    Hello

    a whole new Tecra A10 with buildin Intel 5100 WiFi fails to connect to the Wlan router, using the pre-installled Vista Business 32-bit. Vista has always said: wrong password.

    Yes, Wifi hardware is enabled, of course. And Tecra WiFi OK MAC is stored in the config of the router. Also the WiFi settings were correct (wpa2-psk aes), corresponding to the Wlan router. Password WPA2 is 13 characters. Connect all the other machines with a Wlan successfully turns a working Wlan configuration and use of the correct password.

    I installed the latest driver on the Toshiba site - without success. I also installed the version of the driver from the Intel site will, too--without success. Doesn't matter what tool I used to connect, Vista itself, or the specific tool of Toshiba (Radar), choice to get an encrypted Wlan connection.

    WPA2 and WPA or WEP can be used. I can't get a Wlan connection when encryption is totally * disabled *! Currently, I use a * clear * Wlan to use this Tecra A10 in the network. Real gross and no solution for more than a few days.

    All other devices in the same network can connect the router Wlan with WPA2-PSK and WEP, no problem. Only the A10 / WiFi 5100 fails.

    Searching the Web I found really many reports all issue of WiFi with a WiFi 5100 devices, so it seems to be a generic material or / and driver issue.

    How can I correct this Wifi 5100 connect problem and use encryption WPA2-psk on Tecra A10 and WiFi 5100 with Vista? If this is not possible, I have to return this laptop and get another model with a working Wifi / Wlan Hardware.

    Thank you.
    -Thomas

    Hello Thomas

    Have you tried to connect your laptop to another router by friends or elsewhere?
    It is really strange that you can use any of the WIFI ciphers available.
    Have you tried to reboot your router?

    I have Satellite A300-1LI with the same card, WLAN, preinstalled with Toshiba recovery WXP image and I use it sometimes linked to the WLAN with WEP encryption.
    Have you tried to contact Toshiba or your local dealer for advice?

  • Problem with module 3G Tecra R10 - 10W

    Hello

    I got a new Tecra R10 - 10W a month ago.
    Until yesterday, the 3G module worked fine. This morning I got a blue screen on the end of Windows. After the computer restarts I heard the tone of conecting/disconecting some USB device several times. After the short survey, I found my 3G module enabling / dissabling every few seconds.
    In the control panel/phone options and modem, I found two modems broadband TOSHIBA is on COM3/COM4, 'away', or 'Non-functional '.
    I installed all the new software up to date, as it was shown on Toshiba TEMPRO, bur after that restart the computer got the same result.
    Later, I had Windows termination screen again.

    Please let me know what is the problem and how to solve?

    Best regards

    Hello

    Something seems to be confused at the top on the system
    Maybe it was a new update reported by Tempro. Who knows.
    Always is it that there is an error in device (3G) in Device Manager

    I think you should simply remove the 3G (high-speed modems) module from the Device Manager and reboot the laptop.
    After the new reboot the operating system should recognize the deleted devices and should install it again
    In most cases, it helps to solve these problems

    But if you're not going to succeed, I recommend uninstalling the software from the 3G module, then you must clean the BONES and the registry with a free cleaning tool (i.e. CCLeaner).
    Reboot several times to ensure that everything has been properly cleaned and finally try to reinstall this software again

    Mate good luck

  • Tecra R10 - 10J: BIOS update abandoned "this computer is not supported.

    Hello

    My laptop is a Tecra R10 - 10J PartNumber PTRB1E-00D002FR, 1.40 BIOS version 11/13/2008.

    I recently bought and installed two modules of 4 GB RAM (8 GB). Enter the BIOS setup, I found 8 GB. Windows 7 64 bit also detects the 8 GB, but uses only 3.80! MemTest and diagnosis of CPU - Z are good for all of the 8 GB. I went from RAM modules from one location to another, but nothing has changed. If I replace a module of 4GB by a 2 GB memory, Windows 7 uses 5.80 is going well. Same result as any module of memory of 4 GB or slot I use.

    I suppose that problem comes from the BIOS. The 1.40 version does not support memory mapped IO functionality.

    So I followed the instructions on "http://fr.computers.toshiba-europe.com/innovation/?download_drivers_bios.jsp?" to find the last good package to update BIOS for Tecra R10 - 10J. I downloaded and ran the BIOS310?. exe, but received the error message "this computer is not supported"?

    Can someone tell me how to upgrade my BIOS or did someone has a better idea to activate the full 8 GB of RAM support?

    Thank you for all!

    Axel Limousin

    Hello

    You must install the VAP (value added package) or if this package is already installed, you must reinstall/upgrade to update it.

    Disable the Antivirus software and disable things of security such as firewalls etc.

    Hope that you're lucky...

  • Don't you entering video using Skype on Tecra R10

    Hello

    I do not receive incoming video on Skype, even when connecting to another pc on the same local network.
    The snapshot works very well, so the connection is there, and my own miniature video is also correct.

    When I resize or move the window of Skype I get a mess of windows that overlap doesn't refresh, so for me it wrong to suggest in the Intel 4500MHD video rendering.

    I tested several PC, ISP, networks, Skype 3.8 and 4.0, and the constant is the Tecra R10.
    The drivers are up to date with own drivers of Toshiba (7.15.10.1527). Anyone has the same problem?

    See you soon,.
    Tiago

    OS: Vista Business 32-bit SP 1

  • Tecra R10 - 10J - BSOD if I use WiFi

    I have a new Tecra R10 - 10J. I installed Windows XP directly with the recovery disc, so I never used Vista.

    At the beginning I had problems getting 3 G to work, it is now OK. But I have another question unresolved: Blue notebooks accidents or restart randomly when I'm connected via wifi.

    I did three things to run:
    -upgrade to the new version of BIOS, which is: 1.50
    -updated the last driver WiFi found on the website of intel: Intel WiFi Link 5100 AGN driver 12.4.3.9 version
    -J' have also disabled in Device Manager the ability for the system to border/shock the wifi device (I found these tips on some forums because of driver Intel WiFi Link 5100 is not not reliable).

    It seems to me that theses stocks have made things better. Blue screen are less frequent but they still happen. I also thought, there may be a conflict with the 3G device, so I have alwals turn off 3G using the shortcut when I'm on wifi. However, it crashes from time to time.

    I'm beginning to wonder if there may be a hardware problem?

    Thanks for help.

    Hello

    You also update the driver 3G or only the WiFi driver? I think you should try to update this driver too.
    Check the Toshiba site for an update!

    And can you please send the exact code of BSOD? This is very useful to identify what is the cause. In addition, you can search on the Microsoft KB for this code.

    I hope I could help a bit.

  • Tecra R10 - 14 d - 3 G Internet no longer works after update drivers

    I have a Tecra R10 - 14 d with 3G modem PTRB3E internal Ericson F3507g and I did an upgrade to 3G and Wireless Manager 5.6 modem drivers at 6, and after that I upgraded loss of internet access.

    The upgrade was without any error. The Wireless Manager connects successfully to the internet, but internet provider does not work.

    I tried to find previous versions of Wireless Manager and drivers to downgrade Toshiba without success. Just found the latest version that causes this problem.

    What is there? The new version may not be compatible with my computer?

    Thank you best regards &,.
    Rui

    Hello Rui

    You have downloaded this driver from toshiba support page?
    Have you tried to roll back OS to an earlier time using System Restore tool?

  • Tecra R10-120 - issue 3G

    I have a laptop Tecra R10-120, which comes with windows vista or XP.

    The 3G connection worked well in these systems, but I now have a general version of windows 7 installed on my laptop with drivers downloaded from the toshiba site.

    Newspapers in the 3G sim card and the fine network, but when I press the button to connect, it tries to connect for a long time and then disconnected said.
    Toshiba Wireless Manager is configured as the network provider said that it should be (or so I think).

    Can someone help me?

    Hi mate

    Please check this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=55312

    Maybe this will help you because it's also useful for the other guy

  • Tecra R10-111: cannot install the Wireless Manager

    Hey guys,.

    don't know why, but when I install the Manager wireless on my Tecra R10-111 Wireless Manager can be started, but not a second later, the program ends. The only option I have is to accept and put an end to the program press OK.

    I have two versions of win7 on my laptop.

    1 is the original version of Toshiba Win7 OEM, who has been on the laptop.
    --> Here, it works without probs
    --> All updated etc.

    2. is it a full Version of Win7 bought and downloaded in a microsoft store.
    --> Here it doesn't work anymore!
    --> All updated etc.

    Earlier Versions of the Wireless Manager has worked in two partitions with Win Vista and for some time, I remember that he has worked with both versions of Win7.

    What is the problem with that? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

    Any suggestions?

    See you soon
    Australia

    > What is it with this? Toshiba has to provide updates and drivers that work with any version of Win7 and not only with the OEM Toshiba.

    Do you think that it is a problem of the tool?
    This seems to work on Toshiba pre-installed OS, so it cannot be a question of tool!

    Maybe a part of the software is missing on the MS Win 7 own

    Have you installed the update of Firmware for 3 G Module?
    This Firmware update is necessary to obtain more stability in your 3 G connection with your Ericsson 3 G module.

    Have you installed the registry patches that are available on the page of the Toshiba driver?
    Do this!

    Good luck

  • Tecra R10 - 10W - CMOS battery error and the next mistake of bios password

    I have some old Tecra R10 - 10W

    Aftert long in the cupboard, it says CMOS battery error and after charging I can't start on the old password (bios) system.

    How to reset the password of the bios and is also required for cmos battery and I can do it myself?

    I thank...

    You can change battery cmos your np for bios pasword use google auto, I hand a mini hp with the same problem and initiated a program that has been reset using error code when it is inserted the wrong password 3 times into the line, then I used the error code in the program and got the password restarted hp and password inserted now is job bp. Do I have also an old tecra and difrend problem with it, everything in good standing sims but used laptop start first ferry, after several restarsts shovs splash screen, then runing bp, restarted again, same story, it restarts several and then is runing again, leading with outside the same monitor thing, ideas?
    Here is the link for your problem and sulution: http://dogber1.blogspot.com/2009/05/table-of-reverse-engineered-bios.html

Maybe you are looking for