Connection printer 3050 has to new airport extreme router

Similar Questions

• OfficeJet Pro 8000 Wireless does not connect to my new Airport Extreme router

  I've owned my Officejet 8000 Wireless printer for about a year and had no problems with it.  However, my old wireless router wasn't fully compatible Mac so I couldn't fix it with a password.  I now need a secure network, so I bought an Apple Airport Extreme router in December.

  Last night, I installed the router and it works fine on my iMac, my laptop and my iPhone.

  However, tonight, I'm trying to implement Officejet Pro 8000 with no luck.  I searched the posts here for 3 hours and am not finding the help I need.  Based on the other posts, I read, I describe my situation below.

  I am trying to set up the printer in my iMac Intel with Mac OS 10.6.4

  I'm trying to set up the printer with the installation wizard HP I just install the printer software.

  On the first screen of the wizard, it tells me that my device is not configured (I agree)

  Then I ask him to set up a wireless network.

  When I get to the network selection page, both my network AND my network of comments (that I let my neighbor use) are on the list with the full signal strength.

  When I click on my network and then continue, the HP installation wizard hangs and I have to stop, he.

  When I click on my guest and then network continue, I get the message that my network is not within reach.  (FYI, the printer is 10 feet from the router).

  I tried to power on/off the printer, the router and the computer at all different stages of the process with no luck.

  For my Airport:

  My radio is set to the most compatible choice

  MAC access control is not enabled

  Everything is WPA2 security

  'Use wide channels' and "Create a closed network" is unchecked

  The channel is set to 11

  I'm happy to try the "Add client in the network" thing I've seen on other posts, but I don't think that I have a front panel of the printer where I can start the "WPS" (don't know what it is) process.   If I do, it is not obvious and not in the HP manual.

  My ISP is Comcast (cable internet).

  I'd really, really grateful for the help!  Please let me know what I forgot to include information, and I will be happy to provide it.

  Thank you!

  OK to reset the printing system again, he may be blocked.

• Connection printer square with Hotspot and Airport Extreme

  Hello

  My family has a joint small pizza and I'm looking to switch our POS system instead. We do not have WiFi, so I was wondering if there is a work around to use the personal hotspot feature, set the AXE to "Join a wireless network" and then connect the printer to the back of the AXE to print receipts and also to use the cash register. This is the kit of POS of the place...

  https://squareup.com/shop/bar-restaurant-iPad-mini

  Maybe get WiFi would be the best solution, but I just wanted to see if this is possible. I have connected the AXE to the personal hotspot, but can not get the printer to be visible by the Setup program in the dashboard square app.

  Any suggestion is appreciated.

  Thank you!

  Your link does not work for me.

  You should be aware that Apple has removed 'join a wireless network' option... it no longer works in all utilities V6 later.

  Even if you use later hardware will not work...

  It works on older when equipment... It has an unpleasant effect...

  The airport becomes a silent client on the network... the ethernet ports have been disabled... the only access was wireless.

  I have connected the AXE to the personal hotspot, but can not get the printer to be visible by the Setup program in the dashboard square app.

  Nothing is plugged in by ethernet will work in this configuration. (USB might work if.)

  Apple authorizes the express be used as a wireless bridge. It is called client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

  However, you can buy any other brand wireless bridge... There is no reason in this situation to buy apple products.

• New Airport extreme can't see printer

  I have a new Airport Extreme with an external hard drive and printer, but all of a sudden the printer to stop working with a "printer not connected" message. The reader and the printer are connected through a powered USB hub. What is the problem?

  While keeping the USB hub powered in place, try to temporarily remove the hard drive and have just installed printer. Can you access the printer now?

  If so, it may be that the powered hub may not provide enough power or it is defective. If this isn't the case, temporarily connect the printer to your computer. It is accessible now?

• How do you connect a (very) old Apple Airport Express to a new Airport Extreme network?

  For Bob Timmons:

  I have 2 old airport expresses, an old and one even older. The network home fled the old Express (connected to a modem), who abandons the connection several times a week. The older Express seems quite dead. What I want to do is to increase wifi coverage in my house (no wifi in the kitchen or the 3rd floor). I buy an Airport Extreme to manage the network, hoping that it would provide wireless coverage in my blind spots. Then I could use the former, Express work next to my stereo to listen to the music of my iMac.

  However: the new airport utility shows but does not interact with my work Express. If I buy one extreme and put in place, how I can add the Express network. I downloaded 5.6.1 (and launcher) Airport utility, but don't know if I can use 6.3.6 to implement extreme and 5.6.1 Configure Express.

  Any thoughts on this would be welcome.

  Sorry, I forgot to ask: even if the Airport 6.3.6 utility on the iMac refuses to 'see' the Express, would be the iPad method you mentioned work with an older Express?

  The model numbers of my expressed are:

  work: A1084

  a death: A1264

  Well, if A1264 is dead, it is the end of the discussion on this model.

  A1084... assuming it works... could probably be used for AirPlay, but the A1084 calls this AirTunes.

  The A1084 is at least 9 years old, probably older and the average useful life of an AirPort Express is about 3-4 years. It is amazing the A1084 to work at all, but school drop-outs you see now with the Express indicates that it is heading for the South, he may not be around much longer.

  If you want to try using the A1084 Express, it can be implemented and administered using an older version of AirPort 5.x on a Mac or a PC utility. No matter which version of AirPort 6.x...or.. utility. AirPort on an iPhone or iPad utility may NOT be compatible with the A1084 Express.

  If you are considering a new AirPort Extreme... and... or buy at Apple, so you have one day 14 return privilege on the product, if it will not do what you want, you can return it for credit or a return.  The older A1084 expected to collaborate with the new AirPort Extreme if you spot a version 5.x of AirPort on a Mac or a PC utility to configure the product.  But... saying "should work" is not the same thing as saying "work"... then it will be one of those moments where you won't know how well... or even if it will work until you try.

• Can I use old time capsule for storage only with a new airport extreme (standard want latest HQ)?

  I have a time Capsule elders (802.11n). I would like to know if I can still use this time Capsule only as a network storage device, if I decide to build my network with a new Airport Extreme (802.11ac). If I can do that, how would I set up the network to continue automatic backups with a router to update?

  To do what you want, the new AirPort Extreme 802.11ac would be installed as the "main" network router The time Capsule would be connected to the AirPort Extreme, using a wired Ethernet cable connection, and the time Capsule should be configured to run in bridge with the service Mode Wireless off.

  Any Mac you want to save in the time Capsule would need to have Time Machine preferences on each Mac adjusted to ensure that the time Capsule has been set as the target for backup.

  If you decide to add the AirPort Extreme, post back for more information at this time, if you need installation instructions step by step.

• New Airport Extreme

  I want to Exchange my old AE for a new on my PC using windows 10. Unfortunately, Airport utility does not pick up my new AE to allow me to do something with it.

  Any help would be appreciated thanks.

  Windows cannot be used to install and configure the current version of the AirPort Extreme. You will need a Mac running a current or recent operating system or an iPhone or iPad to configure and administer the AirPort Extreme.

  Of the product from Apple on the AirPort Extreme:

  

  Once you have created the new AirPort Extreme and operating a PC should be able to connect to the network generated by the airport wireless.

• New AirPort Extreme and 802.11ac configuration

  Greetings,

  I'll install a new new AirPort Extreme instead of my old Time Capsule gen1.

  Like many people here, I have a combination of features b/g, n and ca.  I want to make sure my end of 2013 iMac connects optimally via ac.  It is in the line of fire of the new router in 25', so it should be in a good location, if all goes well.

  My question is if I have to just put up an SSID and let devices their own switching group; or experienced here people recommend a SSID separated for the strip of the 5 GHz for ac and n devices?

  Thank you!

  Dave

  Start with normal default values.

  That is to say the band permutation is left to the Mac and SSID is the same on both bands.

  If you then find that the Mac makes the wrong choice... a real possibility. And it's important for you... Then assign the SSID on 5 GHz a different name.

  217Mbps is expected to reach a speed at 2.4 ghz and which probably exceeds the speed of your internet with a margin far... (you need at least 2 x the speed of wireless internet to follow, IE if internet is 100 Mbps Wireless should be 200 Mbit/s at least because of half duplex wireless nature). If you have several items that some should be forced to 5 GHz, which can control...

• connect the hard disk drive to airport extreme

  I have Airport Extreme running.

  I have connected a HARD drive to the Airport Extreme, but do not see the device of the HARD drive in the Finder

  How to map iTunes to play music files devices HARD drive to play music?

  The drive must be formatted in FAT16, FAT32 or Mac OS extended (journaled) and may need its own supply. If these criteria are met, use the connection to the server command in the Finder Go menu to access.

  (141910)

• I just installed an airport extreme router and WiFi works, but the status light still flashes.

  I just installed an airport extreme router and WiFi works, but the status light still flashes.

  Open airport utility... Click EI... and see what the cause of the problem. It will give the list of questions on the summary page. Click on each of them and he will offer you even solutions.

  for example the firmware needs to be updated... nothing major... or DNS is wrong or double NAT...

  Without our crystal ball, we do not know what is the issue.

• connect an old Belkin router to a new Airport Extreme

  Connect my old Belkin N300 router to my Airport Extreme new would have any advantage to do?  What would be the benefits?

  I would only do this if you have any questions using the router Apple on say a PC or a customer who don't will connect easily to the AE directly.

  You must connect by ethernet... and configure the Bellkin in mode Bypass WAN... Just google that... unless it of a very recent model and has WAP mode built in.

  What question first of all of your problems. If you need help post again with the why so we have an idea how to do the installation.

• Can I connect wireless and wired to the Airport Extreme even? My House has plaster walls that inhibit the signal and I move to my office.

  I have a good Wi - fi network at home using an Airport Extreme and Airport Express, but am moving my office on the other side of the House. The walls are plaster that inhibit the signal. Can I connect another Express to my extreme via an Ethernet cable for the office. I still maintain the wireless network. Thanks for your help.

  Yes, it's the right way to do things.

  Only the express will not extend the wireless... you create a wireless network of the same name and security settings... This is called roaming network.

• Airport Extreme router's Express is connected by wire, East of 1 Gbps ports on switch it extreme on 100Bt now?

  Hi all

  In my house, the extreme is connected to a fiber modem 250 / 250 MB/s and I plugged a time Machine as an Express via CAT6 UTP. All serve as a router and provide 2.4 and 5 GHz wifi on the different floors of the House. Just a question: Express has 2 ports ethernet 100BT, Extreme and Time Machine have 3 1000BT Ethernet ports. The extreme switch mode back all 100BT because of the Express ports?  Because that would explain the downgrade in the port on the extreme speed after that the PS3 has been used connected to the Express.

  

  The extreme switch mode back all 100BT because of the Express ports?

  No.... but any device connected to the Terminal AirPort Express will have a maximum speed of 100 Mbps. So, if you connect a 1 000 compatible device to the Ethernet port on the Express, it would appear as a device of 100 Mbps on the network as the Express is limiting speeds.

  So, if you want a device that is capable of 1 000 Mbit/s to have 1 000 Mbit/s speed on your network, it will have to connect to AirPort Extreme or time Capsule.

• Internet connection with XP Pro SP3 and Airport Extreme - possible only Internet with no secruity, WEP - "status is always acquiring network address.

  IMac seen the router and connected flawlessly, Sony Vaio however under secruity always gives me "absorbing the network address", I was looking around and heard xp pro sp3 has problems with wpa2 so I changed the settings for wep on apple Airport extreme and it STILL does not work. If I have no secruity that it picks up the signal from the internet and everything is fine. I tried to update the drivers for the wireless LAN card already, any input would be great

  SOLVED... apparently xp pro sp3 has problems with wpa2, it refuses to connect. I went to settings on extreme airport secruity but wep was not an option, I had to click on OPTION on my MAC keyboard, then click the settings secruity and wep is there, so I removed all the "preferred networks" and restarted the process 'learning' on the vaio and everything's fine. Thanks for all the help, I can get some rest tonight

• Presario 2175US not able to connect to the radio after installing Apple Airport Extreme router

  Hi all.  I have a Presario 2175US portable computer that is running Windows XP SP2.  The wireless adapter is a Broadcom 802. 11b / g WLAN adapter.  We have recently installed a router Apple AirPort Extreme in our House, with a network WPA2 key, and while the wireless network is visible on my laptop, when I try to connect, it tries to connect for about 90 seconds, but fails.  Unlike other laptops that we have, it does not ask me to enter the network key before trying to connect.  If anyone has a solution to this problem, I would be very grateful.  Thank you.

  Thanks for the comments, Paul.  I am pleased to say that the problem was solved after I installed the Windows XP SP3.