Connection printer HP Photosmart C4500-serieis to the wireless router.

Similar Questions

• Printer HP Photosmart more B210 loses the wireless connection. with MAC 10.6 and Linksys router.

  From time to time my printer HP PSt + B210 indicates not 'online' in the window of the printer utility and do not print.

  I have spend hours to review what I did in th past and become confused.

  Should I start with the HP utility and make sure that my printer is listed only once in the queue (as is sometimes show 2 forms - for the same printer) OR should I stop MAC PB > router > Modem and then restart in correct, reverse order?

  Given that I need to choose "IP automatically...". ", I used Safari and put the 192.168.1.1 in the address bar and follow these steps, as already suggested.  What would be the clear measures to reconnect my HP printer status online? Thank you very much!!

  We will set an IP address of the printer:
  
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). You can find the beach DHCP from the router using its internal settings page or in its manual. Use the CD that came with your router or type the IP address of the router (ends para.1) in a browser.
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the bridge and the first DNS. Let the second white.
  -Click 'apply '.
  
  Now, stop the router and printer, start the router, wait, and then start printing.
  
  After that, you will have to redo 'Add printer' using the new IP address.

• Photosmart C4780 "cannot find the wireless router.

  OK so apparently I'm not as tech savvy as I like to think of myself. I just got a used C4780 and spent 12 hours trying to figure how to set up so that I can print wireless. I had zero luck with that.

  I read that the WPS connection method is more easy then I tried that first. After a few failed attempts, I tried to download the software for Windows 8 (as the disc that comes with it only goes to to Windows 7). I got the same error message 4 times (something Microsoft Visual C++ Runtime error), so I then tried the method of the PIN code. After several settings (with the help of my brother on the phone, so I don't really remember what I did unfortunately) just as many failures to connect and I gave up this process.  I printed the 'Network Configuration' Page and the 'wireless network Test report", but I don't have much of a clue as to what it now means. I don't understand what I am doing wrong or what I could do different. The thing that really stumps me, is that the test report said that the printer can't find my router, but at the bottom of the Configuration Page, it lists my wireless network...

  USEFUL/IMPORTANT INFO:

  -HP Photosmart C4780

  -Lenovo all-in-One 8.1 Windows 64 bit

  -router made by ARRIS and provided by my ISP (CableONE)

  -J' installed all the updates that are available for Windows

  -J' restarted the printer, computer, router AND several times

  -my wireless router is in another room, but not more than perhaps 20 feet away

  Side note: I have also a mini iPad... just throw it out there in case it might be a better tool to put up with... If you need to know something more to help me let me know! Thank you for cause in advance that I'm going stir crazy trying to figure this!

  JanessaMarie92 wrote:
  I went on the website of my ISP and discovered that I can't get a new router because of this little note...

  "Cable telephone Service is supported only on Arris modems rented your office of a cable or bought by http://yourbroadbandstore.com/solutions/cableone/."

  Copy + paste directly from their Web site.

  It's OK... you're using their product.  they can always put the Bridge mode.  Call them and tell them that you want to use your OWN router and they put it in Bridge mode.

  EDIT - Bridge mode just turns off the router part and use it as a modem only.

• printer photosmart-309 is not to find the wireless router

  printer photosmart-309 is not to find the wireless router.

  the wizard will search, then once outside.

  the radio is on.

  suggestions?

  Sorry, but your wireless radio is dead.  You can always connect via Ethernet to your router.

• HP photosmart 5520 cannot connect to the wireless router

  The printer has worked I went on holiday, and now it will not work. I have run the wireless network test, and it says "hp printer is unable to connect to your wireless router.  The wireless router is connected and works fine.  My hp wireless computer (windows 7) works very well.

  The structural 'found ssid network name' report, said down

  But "current configuration" has shown the SSID

  can anyone offer a fix?

  Help

  colleenmercy

  Hi colleenmercy,

  In the network menu, select default network.  This reset the current network settings and will help you reconnect the printer to the network.  You can use the Wireless Setup Wizard or reinstall the HP software to reconnect.

• Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Wireless printer not printing since the wireless router has been reset... Can anyone help. I can connect to the internet, now, just not the printer!

  Hi, Rlayhee,

  Printer brand/model?

  Start > Control Panel

  Select the Printers folder

  Right-click on the printer icon, then select open

  Are there pending print jobs

  If Yes, click on file > cancel all Documents

  Close the print queue and the printer folder

  Try printing again

  Start > right click on computer

  Select manage

  Select Device Manager

  Click on the + sign next to the Ieee... compatible printer (if any)

  Right-click on the driver and select uninstall

  Click on the + next to imaging devices

  Right-click on the driver and select uninstall

  Click on the + sign next to printers

  Right-click on the driver and select uninstall

  Click on the + sign next to Bus USB controllers

  Right-click on the driver and select uninstall

  Close the Device Manager

  Restart the computer to Windows to reinstall the drivers

  Go to the manufacturer's website and search for driver updates

  Try printing again

• What should I do if the wireless radio does not work and cannot connect to the wireless router?

  What should I do if, during the installation of my c309a Photosmart Premium printer all in one, which I am trying to install a wireless connection, I get an error message that the wireless radio is not working?

  Solved by turning the radio off and then on new wireless.

• Photosmart C6180 cannot detect the wireless network

  I have a Photosmart C6180 for over a year, and until recently it connected wireless very well.  But since a week ago, it can't detect the wireless network.  I turned off the printer and wireless router several times each without success.  The "Wireless Setup Wizard" running on the C6180does not help. Watch simply screen printer "looking for... wireless router. "indefinitely, until the function Cancel.  The wireless router is about four feet from the printer, in a direct line of sight.  In addition, I have wireless Internet access using the same router and continue to do this successfully, then the router itself works.  Recently I have updated the firmware on the router as well (after the beginning of this problem).  Running the network Test report wireless on a 'PASS' C6180 returns for "Radio on" but a "FAILURE" for "use of Radio". The radio broadcasts as "about" section of the Menu Radio wireless network.  My router is a Belkin Wireless G Router model F5D7230-4.  The printer prints very well with a wired connection, but wireless connectivity has been a key reason behind my purchase.  Any suggestions greatly appreciated.

  Sorry, but your wireless radio is dead.  Its time for a new printer.

• HP 5530: Printer does not recognize the wireless router

  Printer worked so well. Moved and changed via AT & T Uverse and printer HP 5530 network will not recognize the wireless router information. I uninstalled the printer from my ASUS laptop and tried to reinstall nothing doesn't. The cd supplied with the printer woould check not the printer again. The printer is less than a year. I don't know what is happening. Can you help me solve this problem?

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• I received a message on my laptop computer that says not able to connect to the wireless router.

  I received a message on my laptop that says could not connect to the wireless router and it make reference to section of the knowledge base Microsoft 87112 for more information.

  I think you have transcribed the number incorrectly.  I think that the article you want is this one: http://support.microsoft.com/kb/871122

• Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer is located and ready to install, I get a PnPx device then error

  Error 0 x 00000643 error when you try to install a Kodak wireless printer. When tried to install the wireless printer, wireless printer is ready to install I get a PnPx device Microsoft authorization. Runs like it is installing then error is presented. I tried fixit did not work... Frustrated

  You could settle on a previous installation. Try this:

  Go to your device manager and see if you have an old installation of the printer and right click Uninstall. You can also check if there is an old facility of the printer in Control Panel, printers, right click and delete it. Install the printer using the Add Printer Wizard. If it fails again with the same error, go to Device Manager right click on the name of your computer, click on "Scan for harware changes". He must find the printer and install it. Now you can check your printer if its work. If this does not work, please indicate your model of printer on your next reply.

  Open the Device Manager
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Device-Manager

• Connect Windows Vista to the wireless router

  installed the wireless router. How to connect my computer laptop tosiba windows vista to use without being plugged >

  Click Start, connect to, select your wireless router, click on the 'Connect' button below.

  I hope I could help

• Photosmart 6510 does not have access to the wireless router.

  I get the hardware address to ip assinged that begins with 169 and not the ip address of the network of 192.  Was told by HP support yesterday that he had to do with my pc services at startup it prevents access to the network.  My pc has to do with anything?  The printer is independent and should be able to access the wireless router, all my other wireless devices has no problem with this printer.  Sometimes I can get it but can't always, what is the point of a wireless printer, if it cannot operate as a?  Someone at - it a way to ensure that my printer gets ip address, it must without having to start everything each time?

  No, this router should work perfectly.  There are a few settings on the router that are important:

  1. ensure that the 802.11 g mode, with 802.11n is fine, but 'g' must be present.

  2. make sure that the name of the wireless network is broadcast.

  3. don't use MAC filtering on the router.

  4 set the channel of the router on 11.

  5. make sure that the router firmware is updated.

• HP Officejet Pro 8500 has more: impossible to reconnect to the wireless router

  Have had the printer for four years. Has been connected to the wireless router earlier today.

  When I try to set up the connection again, he asks for a WPA key.

  He never did that before, just asked the network password.

  From bottom of router WPA, it matched correctly, get the error message saying "authentication failure".

  Several attempts, same error.

  Reset setting factory (menu) wireless - no change.

  Restarted printer - no change

  Restarted router - no change

  Hello

  WPA key is your network password.

  Kind regards.

• Mac Lion will not configure Deskjet 3050 a to the wireless router. Have installed software HP 3 times.

  My Deskjet 3050 series J611j was ooriginally configured with Mac OS Snow Leopard. I have since installed Lion (10.7.3). I inadvertently reset the default printer and it stopped connecting with the wireless router.  I installed the new software HP Lion but when I go through the installation, after that I tell the printer to connect to the router, I get a message saying that the device is not connected to the computer and connect with a USB connection. But it is connected with a USB cable.

  I fixed it by pulling on an old PC and launch the CD. Who got up the printer on the wireless. from there, I could finish and connect with the Mac.  Thank you.