Connection problem - the difficulty trying to connect two wireless computers

Similar Questions

• You can use the x 86 version and the x 64 version on two different computers

  I have a key/installation of Windows 7, which can be used for installing the x 86 version or the x 64 version. Could I use the x 86 version and the x 64 version on two different computers?

  Hi hgcxngv,

  No - not at the same time.  A key is an installation by the license agreement (regardless of the size of bits).   Is excluding the special manufacturer or license multiple keys which normally applies to companies and I am sure that you would know if you had a since they would cost much more to buy and were more difficult to obtain (if you remember).

  You can install by using 32 bit on a computer and then uninstall it from this computer and install the 64-bit on the other or vice versa (although you'll probably need to use the help of phone to activate the second time since the automated process will most likely perceive it as an attempt to both facilities and reject and you will need manual for past this problem).

  The foregoing does not apply to OEM licenses that cannot be installed on computers with they came, live and die with this computer (even if the key would have worked on each version, perhaps in order to simplify things for the manufacturer).

  I hope this helps.

  Good luck!

  Kosh

• the difficulty trying to sunc a sky caddie

  I'm trying to sync a sky caddie and have difficulty there contacted technical support which tells me that I have a microsoft down the loading problem. I'm trying to sync a sky caddie and have difficulty there contacted technical support which tells me that I have a microsoft down the loading problem.

  Need some help here! got to play golf!

  Hi jwrichter,

  ·         You get the error message?

  ·         What happens when trying to synchronize the game?

  ·         He has already worked?

  Follow these methods.

  Method 1: Perform a clean boot to see if there is a conflict of software like the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click on restart to restart the computer.

  Method 2: Update the latest drivers to display/graphics.

  How to manage devices in Windows XP

  http://support.Microsoft.com/kb/283658

• How to connect two wireless laptop to an unsecured internet connection

  me and my friend. We have detected a wireless network of neighborhood, it is able to connect, but I can't

  How to connect wirelessly

  MR. PHILIPPE,

  Make sure you have your wireless card install correctly on your computer. If you have a laptop then you have a wireless card already in the machine.

  That's all need you. Go to start > Control Panel > network connections, here it takes a current wireless connection. If no, you must install you wireless drivers from the manufacturing of the Wireless card in the computer. (Linksys, Netgear ext...)

  Please rate me upward if you find my post helpful. Thank you!

• Force the VM to use the wired ethernet port instead of wireless

  Hello

  I use ver 9 workstation.  I have my host computer (win 7 64 bit) connected to our network of offices using the connection with wireless computers.

  I use a windows xp based virtual machine image that connects to devices of 3rd party via the ethernet port wired in Bridge mode.

  Is there a way to force the workstation on the use of only the cable connection and don't EVER try to connect via the wireless?

  At the moment I have to disable the wireless for the workstation to access cable port, if the without wire is activated, so you may not see anything on the wired port...

  It also causes headaches with ip address conflicts (3rd devices use the same IP range as our network of offices) if I don't have the VM running and wireless power.

  Any help or advice would be appreciated

  Tim

  Use the virtual network Editor to bind to the target adapter for VMnet0 and set the NIC of the virtual machine to use connected by a bridge.

• Problems with Easy Transfer - trying to connect two computers using a USB link adapter

  I am trying to connect two computers using a USB link adapter, a computer running Windows XP under Vista, I installed the "Easy Transfer" software provided with the adapter link on the computer running XP without problem. I am able to transfer files from the computer to Vista operating, but cannot transfer the XP machine - select 'Advanced Options' to check what files can be transferred I receive the error "an error of analysis of the data on your system, windows Easy Transfer will be closed. Any ideas what I can do, any help would be greatly appreciated.

  http://support.Microsoft.com/kb/928634

  How to use Windows Easy Transfer to migrate files and settings from one Windows computer to another Windows Vista-based computer

  Above is the recommended way to do it.

  See you soon.

  Mick Murphy - Microsoft partner

• Failed to save the system or create the image of the system, error: the problem occurred while trying to connect with the VSS writers (0 x 80042318).

  Original title: cannot backup Windows 7 system.

  When I try to back up the system or create the image of the system I get the following message, the error was detected in the Volumn Service VSS (Shadow Copy) the problem occurred while trying to connect with the VSS writers.  Verify that the event system Service and the VSS service are running and look for errors related to event logs. (0 x 80042318).

  Hi bernardolahoustino,

  Please keep us informed. Please let us know the State of the question, so that we can help you further.

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Connect two VMs via the connection to the local network using VMWare Player

  So this topic can be posted already, but I'm at the end of the roll, trying to find a solution. I have VMWare player installed 3.1.4 on an enterprise_x64 of Windows 7 system. I configured two virtual machines: OS1 comments: Red Hat Enterprise Linux Server 5.5_x64 and OS2 comments: WIndows 7 Ultimate_x64. I need the Linux server to act as a database server in the system environment, that I am creating. The Windows 7 VM will be the client PC. The Linux server is configured to be it's own DHCP server, so ideally the client PC connects to the field of tht and also follow the Linux server IP address.

  I tried all the options of networkign for each virtual computer, but no sem to create this type of connectivity. How to configure the network settings in VMWare Player to make two virtual computers can communicate with each other via a virtual network? (Communication with the host pc is not necessary)

  The short answer is to manually install the lack vmnetcfg.exe, Editor of virtual networkand configure VMnet2 without DHCP and host vNIC and then configure manually each virtual machine network adapter to use Custom VMnet2.

  The longer answer has already been given so many times that you should be able to find detailed directions, however...

  To install the lack vmnetcfg.exe, virtual network editor, run VMware-player-* .exe-e c:\vmptmp go to a command line and then in the c:\vmptmp folder, locate the file c:\vmptmp\network.cab and extract (double-click on the .cab file) vmnetcfg.exe (virtual network editor) file in the working directory of VMware Player usually ' C:\Program Files\VMware/VMware Player ' you can create a shortcut to it and place it with the shortcut of VMware Player if you want to access more easily to her.  This utility is not installed by default is however necessary to turn off the automatic bypass on VMnet0 if the system is multihomed and two or more physical host from the NETWORK adapter is active or you want change VMnet1 and VMnet8 subnet addresses or additional VMnets.

  The you must manually change the configuration of each virtual machine's .vmx file in Notepad, change an existing parameter and add another.

  Change:

  ethernet0.connectionType = "nat"
  

  TO:

  ethernet0.connectionType = "custom"
  

  Add:

  ethernet0.vnet = "VMnet2"
  

  Note: Regardless of connectionType ethernet (n) shows it should be changed to "custom".

  Be sure also to Machine virtual are stop, not suspended and VMware Player is closed when you edit the .vmx config files.

  Here are some pictures to show.

  Here in the VMnet2 virtual network Editor is selected and is how it should be if you what to use your own DHCP server and the host does not have a vNIC.  You can change the IP address as a result of your needs.

  

  Here's the value VM card network NAT settings.

  

  This is what network settings Virtual Machine map will look like after you change the configuration of the Virtual Machine's .vmx file to use Custom VMnet2.

  

  BTW if you replace the Machine network card virtual settings through the user interface customized by something else then you will need to manually edit the .vmx config file to retrieve.   With VMware Workstation, you do not need to manually install the virtual network editor and should not manually edit the .vmx config file as the custom list box is still present and shows all VMnets to select from.

• connection problems the new computer mobile printer

  Hi ive boaght a new laptop and im trying to connect my wireless printer but its request for a security key he never asked me for 1 on my old laptop

  Printer model number?  She asked the security key is your routers password SSID for a wireless connection.  This information is in your router that only you have access to.  Under the wireless tab, you should find your SSID, and then the password.  Consult the manual of your itinerary.

• Is this possible? Two wireless printers identical (HP3050) connected to the laptop even?

  Hello

  I just bought a HP 3050 all-in-one and wishes to buy a home. Before I do, I was wondering if it was possible to connect two same printer on different wireless networks.

  Thank you

  Andy

  Ok. Then, you need to use the CD on the desktop of your wife and the daughter cell phone to set up.

  With you, laptop computer home and work when you want to print, you just select the printer you want to use, depending on your location.

  Best regards

  ERICO

• I want to connect two monitors, but there is only a single port VGA on my PC. How do I plug in the other?

  Only a single port VGA on my PC

  I want to connect two monitors, but there is only a single port VGA on my PC. How do I plug in the other?

  Friday, June 22, 2012 14:19:44 + 0000, CSAChi wrote:

  I want to connect two monitors, but there is only a single port VGA on my PC. How do I plug in the other?

  You must buy a second video card or replace the one you have
  with a card that takes in charge of two monitors.

  Ken Blake, Microsoft MVP

• I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  network cable unplugged wiundows xp

  I'm unable to connect to wireless modem, the message's problem is the network cable is unplugged got new cable still

  Hello Verashanley

  Since how long did begin?
  You have added a new software or hardware to the system?
  If the issue took place recently then you can try the system restore.
  How to perform system restore in Windows XP.
  If you have recently added anything to the system (hardware or software), then remove.
  If the system restore does not then check in Device Manager and verify that the network card is considered and no errors appear.
  To open Device Manager, click Start, and then click Control Panel. Click performance and Maintenanceand then click System. In the hardware tab, click Device Manager.
  Check the type of network card you have and that you try to update the drivers from the hardware manufactures Web site.
  Also, check the connection for the network adapter. Do you see any physical damage. When you plug the NIC saw all the lights on the network card lights up? If not, then you can deal with a hardware problem and need to contact the manufacture of the system and see about obtaining the card replaced.
  Let me know the results. Thank you.

• If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

  If I have two modems in the same office... windows xp can combine two connections at higher speed dial... my question is can I do the same thing for the dsl if I have two lan cards?

  Hi cliffwho

  You can fill with connections to the LAN. However I recommend you read this first to understand what it is that you do. I hope this helps.
  http://TechNet.Microsoft.com/en-us/library/bb457038.aspx

• How to connect and configure two wireless routers to provide the same connections across large areas?

  I have a big long House and prefer to use two wireless routers EA4500 to remote points to offer the same connections from one end to the other.

  How to make this wise (?) configuration

  @jcousie

  You can cascade two of them. Follow the steps on this link.

  Ann_18678
  Linksys technical support