Connection problem with the database, the closure of Flex Builder

Similar Questions

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• Connection problem with the satellite C660 - 24L

  Hello world

  I have a Toshiba satellite c660 - 24L running windows 7 and have had a problem with internet connection in the last two days.

  Marketing, the internet works very well for around a minute and then I lose the connection. The computer says still connected but the network map displays a problem between the computer and the Wi - Fi router. After that restart the internet works fine again, and then disconnects after ~ 1 min.

  A few times, the computer froze, and gave me a blue screen and memory dump, and then a forced restart.

  Computer behaving the same way when connected and disconnected from the mains.

  All other devices will connect to the router talk-talk with no problems.

  Any help is appreciated, thank you in advance.

  Lewis.

  Post edited by: lewlew

  Have you noticed a few problems if you use the local network connection?
  Original Toshiba WLAN driver is pre-installed on your computer?

  To be honest, it is not easy to say why this show is starting to happen so suddenly.
  Try to back up OS to an earlier time using System Restore tool just to see if the problem will still be there.

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• connection problems with the version 6.18.0.106

  Hello

  I have Windows XP and I have always used an earlier version of Skype, but now the old version is retired and I can't use it. So I download the new version 6.18.0.106, but this one has a connection problems. Every 4 seconds, I am offline and then online again for 4 seconds. My connection is OK and my provider does not block Skype calls. Is there anyone who knows how to fix?

  Try to uninstall the latest version and install the older version of Skype 6.14.0.104:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Problem with the upgrade to Flex 3

  I've recently updated for Flex 3 and an app I wrote with the beta 3 version, which worked very well does not work with the release candidate version. Most of the stuff has been cosmetic which I expected but a major problem is that the TileList info is not displayed.
  
  Code
  
  < mx:HTTPService id = "tempXML" resultFormat = "e4x" result = "onResult (event)" url =" http://rbdev.mysite.net/info_wrapper.php?url=https: / / {customer.text}.mysite.net/interface. php? action = showopen & amp; operation = showassets & amp; format = xml & amp; opstatus = crit & amp; name of user = {username.text} & amp; password = {password.text} ' / >}"
  
  < mx:TileList dataProvider = labelField "{_xlcMyListData}" = "fleet" left = "35" right = "15".
  width = "350" backgroundColor = "#000000" color = "#ff0000" fontSize = "27" borderColor = "#000000" columnWidth = rowHeight "315" = "50" themeColor = "#808080" fontWeight = "bold" allowMultipleSelection = "true" id = "TileList1" height = "0" y = "202" x = "178" / >
  
  < mx:Script >
  <! [CDATA]
  Setting the display of the TileList component
  Import mx.collections.XMLListCollection;
  
  [Bindable]
  private var _xlcMyListData:XMLListCollection;
  
  private void onResult(Event:ResultEvent):void {}
  var xmlResult:XML = XML (Event.result);
  _xlcMyListData = new XMLListCollection (xmlResult.. asset);
  }
  
  []] >
  < / mx:Script >
  
  
  As stated before the app displayed data before with flex2 and the beta of flex 3. Is there something I'm missing now?
  

  My call to the server was wrong. It wasn't a problem with flex.

• Bluetooth connection problems with the recent update of IOS

  I recently updated my iPhone 6s with IOS 9.3.1 update. Since then, my phone calls are inaudible in my car with my Bluetooth. I deleted the device in my car and turned off and restarted my phone, but my iPhone is not discover the Bluetooth in my car. Any ideas on a fix?

  Sorry, I can't offer a solution but I wanted to get this thread to keep up-to-date.   You aren't the only one with this problem.  I have an iPhone 6 s + and with IOS 9.3.1 update, calls I am doing in the completely distorted sound car.  Also appears that Bluetooth is disconnection/reconnection intermittently.

  Just found the problem today so I did not go through the process of removal of device re-matching, etc.

• Problems with the closure, by opening the Task Manager and Norton Internet Security. Help, please!

  Hello

  I have a HP Pavilion dv7 with Windows Vista Home Premium (64-bit). Until Monday, there is no problem whatsoever with my computer at all. I have not installed or uninstalled, whatever it be, changed settings, done anything differently with my computer. Suddenly it now "hangs" on the screen of closing down. I'll try to reboot or stop using the menu start, and it will stay on this screen indefinitely. Now, I have to manually turn off the computer. I spent on the Support page and studied the Performance issues, and all I get is I have Visual settings that interfere with closing... except my Visual settings have not changed in any way. In addition, I can not properly update my computer or do a system restore because the computer will shut down.

  In addition, the Task Manager will appear no more. I'll press ctrl alt del and nothing appears, just the green icon in the corner of the screen. If I try to right click, no response.

  I tried to do a full system scan in Norton Internet Security but she "leaves" scanning. It will scan correctly when I'm in safe mode, but it comes with no virus, trojan or other problem.

  So in essence, I tried everything I can think of to fix my computer nothing works. It was working perfectly before this week. I have no idea where to go. Any thoughts?

  Thanks in advance,

  G

  Hello

   

   

  Method 1.
  First check to see if there are external devices attached to the computer, if so remove and check.

   

  Method 2.

  Step A.

  Start your computer in safe mode and check if it starts.

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

   

  Step B.

  If it starts on the desktop in safe mode and then set your computer to the clean boot and check if it starts successfully. If it starts successfully can be a third-party application or service is causing the problem. We can use the approach 50 / 50 to narrow down the root cause of the problem.

  
  See the article below for instructions on how to start your computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

   

   

  Method 3.
  I recommend to run the restore of the system in safe mode and check if it works very well.
  Reference:
  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions
  Note: If you use system restore when the computer is in safe mode, you can not undo the restore operation. However, you can run System Restore again and choose a different restore point if any.

   

   

  I hope this helps.

   

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Problem with the Installation of Warehouse Builder repository

  I try to install OWB 11.2 on a database of newly installed 11.2 on a German Windows 7 x 64 machine. When I start the Repository Wizard I get a 40% increase and the line 'Element SeedData.XML 99% use' Message: Die Eigentumerinstallation of the Warehouse Builder - Workspace EIB Benutzer OWBSYS nicht been ausgeführt wurde. INS0017: Installation der Seed-Daten nicht been. INS0029: Fehler bei der Installtion. The last lines of the log file are:
  
  principal. TaskScheduler timer[5]20100928@16:05:41.041: 00 > oracle.wh.repos.pdl.mcm.MCMUtils.executeStoredProcedure(MCMUtils.java:59): {call SnapshotTrigger.syncAssociationTables}
  principal. TaskScheduler timer[5]20100928@16:05:41.041: 00 > oracle.wh.repos.pdl.mcm.MCMUtils.executeQuery(MCMUtils.java:130): WVW: point sp registration
  principal. TaskScheduler timer[5]20100928@16:05:59.059: 00 > oracle.wh.service.impl.assistant.ProcessEngine.display(ProcessEngine.java:2110): Throwable = INS0017: Installation der Seed-Daten nicht been.
  principal. TaskScheduler timer[5]20100928@16:05:59.059: 00 > oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:1476): [executeOwbReposOrRuntime]: error occurred during the sowing OWBSYS. = Java.lang.Exception exception: INS0017: Installation der Seed-Daten nicht been.
  principal. AWT-EventQueue-0[6]20100928@16:06:00.000: 00 > oracle.wh.ui.jcommon.WhButton@26cd2192: WhButton setLabel rtsString = OK
  principal. AWT-EventQueue-0[6]20100928@16:06:06.006: 00 > oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:1476): open before "UnSuccessDialog".
  principal. AWT-EventQueue-0[6]20100928@16:06:06.006: 00 > oracle.wh.ui.install.assistant.wizards.AssistantWizardDefinition.display(AssistantWizardDefinition.java:1476): open the UnSuccessDialog...
  principal. AWT-EventQueue-0[6]20100928@16:06:06.006: 00 > oracle.wh.ui.jcommon.WhButton@26cd2192: WhButton setLabel rtsString = OK
  
  Before I run the Repository Wizard, I started the scripts:
  
  @C:\Oracle\product\11.2.0\dbhome_1\owb\UnifiedRepos\clean_owbsys.sql
  @C:\Oracle\product\11.2.0\dbhome_1\owb\UnifiedRepos\cat_owb.sql TS_OWB_REPO
  @C:\Oracle\product\11.2.0\dbhome_1\owb\UnifiedRepos\reset_owbcc_home.sql C:\Oracle\product\11.2.0\dbhome_1
  alter user identified by password owbsys account unlock;
  change owbsys_audit user identified by password unlock account;
  
  I also tried installing from another machine and also started the script
  @C:\Oracle\product\11.2.0\dbhome_1\owb\UnifiedRepos\remote_owb_install.sql C:\Oracle\product\11.2.0\dbhome_1\
  but the result is the same.
  Where is my mistake?

  I found my mistake. The space was too small :-(
  He had only 20 MB instead of 200 MB I wanted to give him. Somewhat strange. After I increased the tablespace to 200 MB, I got the following message in the Repository Wizard.

  INS0005: Tablespace TS_OWB_REPO hat nicht der freien free zum Installieren der owb_repository_owner? -Objects. ES are 0 bytes space available freier. Es sind 262144 bytes required. Raise Sie die Grosse of the Tablespace, wahlen you are a different Tablespace aus oder.

  even if the tablespace was totally empty. After I put the tablespace to "autoextend on ' the repository Builder completed without errors even if it used only about 150 MB to 200MB.

• strange problem with the database link

  Hello world
  
  I have a strange problem with the link of database in Oracle 11 g Express Edition;
  There are two computers: computer-server and the client computer. Tnsnames.ora are the same on both computers IE.
  
  CT =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  )
  (CONNECT_DATA = (SERVICE_NAME = XE)
  )
  )
  
  I created the database link:
  
  Create database link zdalny
  Connect to < user_id > identified by < password >
  using "CT".
  
  Customer cannot connect with server when I do not use above the command. But when I change 'use' for using "krzysztof:1521" or by using "krzysztof" or "server IP:1521" - everything is ok.
  
  Why I ask. Because in all the materials that I read about Oracle command with the help of "CT" should work correct. But there is no. Do you know why?
  
  Thanks in advance and apologize me for my English.
  
  Rgds
  Krzysztof

  Here's the tnsnames of your server, but to connect to the oracle server db (any client or to another instance of db oracle), you must install oracle client.
  However, in your condition, you want to connect the DB1 Oracle OracleDB2 using a link db, I'm right? In this case you should always set the entry in the tnsnames.ora
  To verify that you can connect to Oracle DB2 from DB1 Oracle, you can use tnsping in the command line.
  In your case

  c:\tnsping CT
  

  Krzysztof Szymaniak wrote: CT =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = krzysztof) (PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = XE)
  )
  )

  Check your tnsnames entry in the machine, you are trying to connect to. And check if the tnsping is successful.
  Sometimes the error message says not everything, which means that you need to troubleshoot yourself and learn from the experience.
  Always in the opposite case, refer to the documentation.

  See you soon.

  Published by: Spongebob December 14, 2011 09:30

• Sierra Siri, «I have some problems with the connection...» »

  Guys,

  I just installed Sierra on my MacBook Pro (retina, 13 inches, early 2015) version 10.12. I can't get Siri at work, the app tracks, he hears what I'm saying, but after awhile, he returns with two messages, both on the screen and verbally "I have some problems with the internet connection. Please try again in a moment. "&"Sorry, I'm having problems with the connection. Please try again in a moment. »

  Any ideas?

  Thank you

  N

  It's a network problem.

  Check the proxy settings that blocks maybe, or a firewall.

  System Preferences > network > Advanced (for your current connection) > Proxies

  Something there?

• Siri does not (problems with the connection)

  Hello

  I installed macOS Sierra yesterday. Everything seems to work fine, except Siri. With Siri I always get an error message "I am having some problems with the connection. Please try again in a moment. ». But this seems to appear every time. The network connection works fine, I can't access the Internet without problem.

  No idea how solve the problem?

  I use an iMac (27 inch, mid-2011). Internal microphone is connected, I also see the 'waves' change while I am speaking.

  Concerning

  Thomas

  Hey, thochstrasser. Thank you for using communities of Apple Support.

  It seems that Siri is reluctant to make his debut on your iMac after upgrade to Mac OS Sierra. I want to make sure that you get the benefit of this new feature on a Mac.

  1 try safe mode if your Mac does not start -even if your iMac to market, safe mode makes sure it starts successfully.

  2. How to test a question in an another user account on your Mac - since this is most likely a software problem, test to another user will indicate if it is right to your user account or throughout your system.

  3. use Time Machine to back up or restore your Mac - if it seems to be systemic, the next step should not cause problems. But it is always better "to have" a backup to the "need".

  4. on OS X Recovery - the issue as part of the operating system, reinstall should do.

  Have a great weekend!

• Siri having problems with the connection.

  Hello

  I have an iPhone 6 Plus, 64 GB with IOS version 9.3.3 (G 13, 34) and the carrier is Vodafone.

  I have problems with Siri, feel when I asked her a task (research or appeal), after a few seconds of waiting, the answer is always "sorry, I have a problem with the connection. Please try again in a moment. »

  I have the right connection with Internet with WIFI and 4G data stream.

  I did reset network settinjg, but I don't see any improvement.

  Please indicate what I can do and if it's a common problem with the iphone 6.

  Thank you!

  CC

  After the reset of the iPhone ("home" button and close button for 10 seconds, with the iPhone connected to the computer), Siri works!

  I am concern I have to do this reset every 2-3 weeks if I need services of Siri...

  Good luck to all of you who have the same problems with their iPhone of hares!

  CC

• Problem with the network connection security

  When I try to view certain websites, I get an error message that says: "there is a problem with the security of your connection Metwork. In addition, a friend just sent me a copy of an e-mail that was sent to him. Apparently, someone must have hacked into my email account, has obtained my contact list, created an e-mail account using my name and sent e-mails to people on my contact list.

  How can I fix the problem with the warranty of my network connection, and what I can do on the pirate e-mail contacts list?

  Can you give an example of the websites that you see this 'error' on?