Connection problem with the satellite C660 - 24L

Similar Questions

• Wireless connection dropping on the Satellite C660-195

  Hello

  I recently bought a new Toshiba Satellite C660-195.
  However, I have problems with the wireless connection. When I bought the laptop, it was full of all the annoying and resource hungry programs Toshiba install there. I have reinstalled Windows on the laptop, just install the drivers and software, I wanted and needed. I have problems with the wireless to stay connected. I can detect wireless networks and connect to that I want to be on, I have to add is a connection at home (I'm not fly: P).

  However, the continuous wireless connection down, becoming 'limited' as it says in system tray icon but then turns back on and the process just keeps spiraling on, on and off.

  The wireless I connect works quite well using Xbox consoles, at first I thought it might be the router but after that a second thought if found the wireless on the Xbox is fine then I surely can't be the case? The laptop is Windows 7 64 bit

  Thank you

  Luke

  I wish people would read all the postings first before creating always new posts on the themes that have been already published in the forum:
  Check this domain:
  http://forums.computers.Toshiba-Europe.com/Forums/Forum.jspa?forumid=30

  Update driver Wlan www.realtek.com.tw and disabling power saving for WLan would solve you problems.

• Problem with the Satellite Pro 2100 and new modules of RAM

  Hello

  I have a Toshiba Satellite Pro 2100 and I have a problem with the memory upgrade.
  My notebook of startup only if a plug-in module to a ddr, but if I insert the two modules IN CC led orange flashing start when I try to turn on the pc. The stop led not blinking unless I take out the battery and the dc adapter.
  Here is the code of the modules:
  KTT3614/256 (original)
  KVR266X64SC25/256
  256 MB pc2100 both.
  Starting the PC with any of them, as well as the modules are both compatible.

  Any ideas?
  (Sorry for my English but I'm Italian: D)

  Post edited by: DaK_TaLeS

  Hello

  the second location of memory perhaps is the problem.
  Try to start with a module in the second slot, first an empty slot.

  Good bye

• OfficeJet 6600 - reports HP Connect "problem with the printer.

  I just bought an all-in-one OfficeJet 6600 and immediately installed on my MacBook Pro. Installation went smoothly, and I used it for scanning and printing. I am very happy. However, I noticed that HP Connect reports "Issue with printer." Well, it worked fine, so I ignored the error and continued to work.

  Tonight, I have installed the printer on a Windows 7 laptop. At HP Connect, it is always now reports "Problem with printer." That's it - no further details and no symptoms of any kind of problem. How to diagnose the 'problem' and how to fix it?

  Hi there, I know this may seem illogical, but I wouldn't worry too much about the problem with the printer State message in connected HP. I saw myself sometimes, and I was able to print successfully from a mobile device to the printer which connected HP indicated that there is a problem. Have you tried to send a job by using either the application mobile ePrint or to the e-mail address of printers for the printer in question?

  On the Windows 7 machine, you can also download and run the HP print and Scan Doctor to confirm there is no problem with the connection to the computer on which is installed the software of the printer or the printer hardware. Be aware, however, that the application is compatible with the Windows operating system only, so you cannot run it on the Mac computer, but unless you are having problems printing from Mac to the printer, there is no reason to suspect that anything is wrong.

  Hope that makes sense, but post comes back with other questions.

  Best.

• A few problems with the Satellite U920T-100

  Hi guys,.

  my girlfriend ordered a Toshiba Satellite U920T-100 about three months ago and she had problems with it since. We're not quite sure what causes because they seem to happen randomly.

  The questions are:
  -It starts, but it freezes at the Win8 connection with a blue screen (a rather hot blue, no blue screen of death)
  -It starts not at all, only after a few attempts
  -It will not stop
  -It freezes all by organizing files (for example copy of files from A to B, but not yet large amounts of files)

  New: these questions seem to be completely appearing randomly, I wasn't able to reproduce them in any way.

  Also: WLAN connectivity is really bad.
  The laptop is not able to find networks, while my laptop has no problem with it.
  And when he finds them and connect, the connection be lost - once again: no idea why.

  That surprises me the most, because in tests and comments that I've read that connectivity has been praised everywhere.

  I have reset factory?
  Run through some specific tests?
  Or is is hopeless, because there are so many problems with it?

  I'd appreciate your help!

  Hello

  > I should factory reset it?

  I think you should do that because the issue described can be related to system problems, but also hardware problem (HARD drive for example). The resumption of the factory allows you to check if its software or hardware related problem.

  Usually, all the problems of software (System) could be solved by the recovery process. Hardware problems would continue.

  From my point of view, the recovery of the system is the first step, you should try to solve the problem.
  In case this is not enough, a hardware problem (RAM or HARD disk) is possible, and given that the laptop is still under warranty, I recommend you contact the service to check the unit.

  Hope my advice might help you a bit

• Some problems with the Satellite A210 - 11 p

  I bought my laptop Satellite A210 - 11 p in September last year, but over the few months Ive had some problems with it.

  1. it seems to be overheating to the point of not being able to touch the bottom of the laptop whose total stop me use it as a laptop. Is - this usual?

  2. the screen turns off after approximately 2 minutes after the connection.

  3. any ideas where I can buy a new charger?

  Can you help me?

  Thank you
  Mike

  1 could be an accumulation of dust in the radiator. An FSL can remove it for you, or you can blow with a can of compressed air.
  2 power settings? Perhaps the Toshiba Power Saver is set to decrease intensity when loading in the system tray.
  3. I think an ASP can sell you a.

• The Internet-related problems with the Satellite A300-177

  Hi - I was wondering if anyone can help?
  I just got a Satellite A300-177, however when I connect it to the internet (I tried broadband wireless and mobile) images and low resolution is pixelated. I think that sometimes happens, but there is usually an option on a laptop to remedy (to do with disabling the option of your laptop, save images low resolution to run faster) however this particular model does not seem to have this option (as tested by our technician COMPUTER)!

  Please can someone tell me if they have the same problem before I return it because I like really this laptop apart from that!
  Thank you!

  This part of the operating system or Internet Explorer option? This option does not for me because I never noticed anything like that.
  I also believe that the COMPUTER technician knows the difference between the responsibility of Toshiba and Microsoft. If this option is part of the operating system or THE Toshiba has nothing to do with this and you should check the Microsoft Knowledge base to see if there is a report thereon or similar problems.

  If you find more on this topic please let us know.

• Problems with the Satellite A665-11Z

  Hi all!

  I have problems with my laptop, the problem occurs for the most part, any time.
  (start cold upwards) on the screen with the AC is plugged and the battery to connect, the laptop stops receiving power and battery light flashes orange. I re plug the AC several times and this until the battery dies

  which gives it a while it stops then when I play a game (Team fortress 2 to be exact or ETS2) play for about 15-20 minutes until the same symptoms recur...

  I replaced the DC Jack inside the motherboard and the problem persists,

  I have baught a new real charger from ebay

  I also have repasted CPU incase of heating, but is not the issue, as it happened on a cold start upward on the screen it just completely cut to connect.

  I also installed windows 7 ultimate sp1 and update all readers
  I just installed windows 8 pro and updates installed etc.

  I removed the battery of the laptop to see if that was the problem, but it still happens, but obviously there is no battery in the laptop just turns off completely without blinking light orange on the sign of the battery

  The battery is weak it holds for 10 minutes at full load, but this isn't the question why the laptop shuts down with the charger because I removed and still...

  anyone has any idea what it is? :(

  Thank you

  I agree with you that isn't related to malfunction of the accumulator.
  The laptop should work correctly even if the battery isn't inserted.
  That's why I think there must be something wrong with the motherboard or the part connected to the mobo

  However, its really hard to talk about possible troublemakers, because he could make almost any part that affect the functionality of the laptop.

  In the case where the motherboard is affected (a kind of power provide electronic malfunction) repair will be expensive affair because the new motherboard is one of the portable computer expensive parties.

• CONNECTION PROBLEMS WITH THE ROUTER (NETGEAR) - no problem with the provider of speed as it has been checked__

  • Programs you have problems with - very slow connection with all pages
  • Error messages - on the profile of my son is unable to connect at all with the error message
  • Recent changes made to your computer - windows 7 but added meeting the problem before this
  • What you have already tried the problem - claimant contacted no problem with their connection

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hello

  Reinstall the NIC drivers
  Reset the router and check.

• Connection problem with the database, the closure of Flex Builder

  Hello

  I developed a web page that connects to a database, reads data and it shows on the screen. I use HTTPService to connect to a php server that supports MySQL data. Everything is OK when I run the Flex Builder web page, but when I run the page doing double click on the file released .html the connection fails and the program generates this error:

  [RPC Fault faultString = "" error #2028: file:///Q:/2009-08-05-1330FinalFrontEnd/bin-release/FrontEnd.swf SWF file with Local file system cannot access Internet URL http://localhost/Test2/Test2.php. "faultCode ="InvokeFailed"faultDetail ="null""]
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal: call ()
  at mx.rpc.http.mxml::HTTPService/ http://www.adobe.com/2006/flex/mx/internal: call ()
  at mx.rpc.http::HTTPService/send()
  at mx.rpc.http.mxml::HTTPService/send()
  in FrontEnd / submitLabelsQuery)
  in FrontEnd / updateLabels)
  in FrontEnd / ___FrontEnd_SetEventHandler5_handler)

  Does anyone know how can I use the web page without using Flex Builder?

  More information:

  I use Flex Builder 3 to the development of the web page and WampServer 2.0 for the connection with the database.

  Thank you

  Onditz

  Hi Onditz,

  Previously, I also faced the same problem when working with Php as the Backend, the problem is that Flex does not call your PHP page

  It is the way I solved it to export your Flex Project at Flex Release Build.

  Right click on the export of project---> Flex project---> Release Build---> copy all the files on your server where all of your PHP files are and then call the application from the browser

  http://localhost/test2/sample.html. »

• Connection problem with the second monitor, macbook pro 2014, OSX El Capitan

  There are a few threads describing problems with two monitors, but I have not found a match.

  I like for the operating system ask login password once the lid is closed, no matter how much time has passed (even for a moment). Also, I work with a dual monitor. However, when my macbook is plugged into the monitor and I close the lid, the macbook don't disconnect but spends just primary monitors. Understand that this could be a feature and not a bug, I tried to unplug the monitor before closing the lid. But the OS seems not to realize that the monitor has been disconnected, and when I close the lid he didn't ask me for my password once that I reopen it. Does it also if I wait a bit (i.e. one minute) after disconnecting the monitor, but not if I wait a while (or 15 minutes), well that I've not enough highlighted how long is necessary so that it starts locking on my closing the lid. He does it with different monitors, so I doubt that it depends on the particular monitor. In both cases, I used the HDMI port.

  This is quite annoying, because I need to be able to disconnect safely in a short period of time, and I was not able to find a workaround on mine. Everyone knows this? Thank you for any help or advice.

  Emilio

  You might have invoked indevrtantly this obscure 'functionality' of MacOS. Read the article and see if you do these things:

  Use your Mac laptop to view closed with an external display - Apple Support

  .

• Someone at - it problems with the Satellite Pro C650 battery?

  Any other owners have problems with their batteries?
  Even when completely loaded - then unplugged and not on internet, I get less than an hour out of her life.

  Has been using MS Word in the last few days - and had to plug the laptop in an hour!

  Hello

  We need to change and optimize battery usage settings.
  This is possible in power management.
  You can decrease the screen brightness and can change another option which is located in the Windows 7 power management.

  The point is that the battery depends on its use for laptop and you will still notice different battery due to the use of different software and different settings working time.

• connection problems with the version 6.18.0.106

  Hello

  I have Windows XP and I have always used an earlier version of Skype, but now the old version is retired and I can't use it. So I download the new version 6.18.0.106, but this one has a connection problems. Every 4 seconds, I am offline and then online again for 4 seconds. My connection is OK and my provider does not block Skype calls. Is there anyone who knows how to fix?

  Try to uninstall the latest version and install the older version of Skype 6.14.0.104:

  http://download.Skype.com/MSI/SkypeSetup_6.14.0.104.msi

• Problem with the Satellite A300D - 14 p

  Hi all!!

  I have problem with games Test drive Ultimate and Need for speed pro street, when I press the button run, don t car, when spending the same time, car will lead, then I run the button, but my car don't stop at the same time, then the car stops! When I play this games keyboard button will stick, but when I work or play other games, my laptop works properly!

  Maybe that's the problem of processor, and I need to update drivers...! What do you think?

  I look at my CP CPU load is 100% the two core, when I play this game!

• Problems with the Satellite A-210 camera

  Hello. I have a problem with my webcam, sometimes it's not ok. Sometimes I can use in the Messenger, but sometimes show me a problem and I can't use it. Display a message as I am using the camera in another program but is not fair. Can you help me? If is posible, response in Portuguese or Spanish, my English is terrible. Thank you. Antonio

  Have you already installed Vista SP1? Help with questions web cam.

  But let me ask you, what is the exact message when windows says that the camera is already in use? Perhaps you might find on the other program that way.