connection problems router WRT310N and wrt54gs * with DSL

Until I can return to my apartment and after IPconfig etc. returns I wanted to see if anyone has had the following problem.

I had a home wireless network set up with a wrt54gs v 5... I think it was BOM.

A few days ago I tried to get the network key for the new smartphone and my roommate kind of stupidly locked myself and disconnected my phone then my Office Wireless adapted. passing through the standard power recycles and resets all him remains disconnected in the apartment as well.

I have DSL through verizon, a toshiba satellite a135 with vista installed, all updates of drivers, and a westell 6100 dsl modem provided by my phone company.

highlights include:

(1) two nights now troubleshooting and browsing the forum. I have already exhausted simple corrections of linksys on his questions and help section.

(2) new router, I wanted anyway a new and estimated that he was the problem. So I bought a wrt310N, hung, and he now obtained, there no longer updated set of firmware

(3) internet connection is fine when I connect to my laptop directly to a dsl modem.

router 4) implements the home network wireless very well, but with no internet connectivity

(5) computer wired to the modem connects to the internet. wired computer for router modem does not connect to the internet. with two routers. If it connects not wired and wireless won't be better.

I'm getting a little tired and tired, not to mention, I didn't my XBOX live fix to remove the stress of working in a military office all day lol

everything seems to work until the router tries to connect to my dsl provider, at least as far as I can tell.

and I'll be on the phone/forums with my ISP as well to make sure that I am not he mess up simply forgetting to fill in an optional field with info mandatory lol.

so... help?

still, when I go home for lunch I'll post information and specifications of real hardware if someone a little more savvy I know what to ask.

Any ideas on where I'm wrong now?

Fixed issue...

in the end, it's a problem between the ISP's modem and the router that they helped me understand.

My DSL service had changed their service, so TRP was no longer how they did the connections. Automatic DHCP was the current form. Following configurations of router DSL online provided inaccurate information. I didn't have the time to check with the ISP until yesterday afternoon when I was finally able to make a phone call and clarify things.

We put the modem into bridge mode, checked some settings on the router, and then everything is back up now.

Tags: Linksys Routers

Similar Questions

  • Apple and Adobe fixed the problem of ink and slides with iPad 2 Air again! It's summer is really long!

    I wonder what the updates on the issue of ink and slides with iPad 2 Air, has been set yet! It's summer is really long!

    No - Sorry to say. But it loks like a case of death for me. We use all this money on paper and pens next time I will wait 1-2 years before trying to summarize fancy gadgets / hardware from Apple / Adobe - I'll stick to Wacom for sure.

  • How to configure a wireless router WRT310N at att westell DSL

    Are there instructions explaining how to connect my att dsl westell moden to my Linksys router.  I change to att comcast service providers.  My router worked with my cable model, but I can't configure it to communicate with the dsl modem.  Any help would be appreciated.

    You have said that you put westell in Bridge mode and configured the linksys for PPPoE, but also enter AT & T DSL username and password? The manual mtu value and change the 1500 to 1492?

    Call AT & T and ask them your DSL username and password. Then enter that on the linksys. Then change the Mtu value and power cycle everything and then you're done.

    Don't forget to make sure that you connect the Ethernet cable to the port of your Internet linksys.

  • HP 6100 on extended connection problem router wireless

    We have two printers a 8600 while one and a new printer 6100. My Office I use a mac OSX Mavericks on the network SSID 'Outhouse' my wifes machine is in another building with the 6100 and the extended network SSID "outhouse_EXT".  We both need to be able to print to other printers. His laptop that runs Windows 7 works very well and can print on both machines. However I can't print its 6100. In an attempt to discover his printer nothing comes.

    Any help greatly appriciated.

    Hi detaylor12,

    I understand that you have a 8600 Officejet and an Officejet 6100 and want to be able to print to each of them, but have problems. I'm sorry to hear that, but I'm absolutely going to do my best to help you!

    The latrines and outhouse_EXT that both appear as options of connection on your Mac? If they do, I think that's the problem. You must be connected to the same network that the printer is turned on in order to access it. When you want to print to the printer of your wife, you would have to make sure that your Mac is connected to the network rather than the Outhouse network as your printer and your Mac are normally on outhouse_EXT.

    Give that a try and let me know if it helps

  • Problems to recognize and sync with the smartphone Blackberry Q10 with PC

    Thanks in advance to all.

    My BB Q10 was not reproduce my calendar and added duplicates to my contact list whenever I have synced.  So, I uninstalled their software thinking Backberry link I re-install and solve the problem.  Now my PC does not recognize the phone (I tried the 'activate fix mass storage) and BB tech support says that I need to install a "div" ("you must contact Windows to request assistance on their part on the .msi file that your computer needs.") in order to download and re - load in the BB Link software.
    I know that the problem comes from my PC because I connected the phone to my wife and it was immediately recognized, and you are prompted to install the BlackBerry link.
    I know I'm a fossil with Windows 7 and Blackberry, but any help would be appreciated. Thank you

    Like so many people, I had a nightmare trying to connect my Q10 and before that a Z10 for LINK.  After reading a lot of posts become completely disillusioned, until I found a post on the opening of the control panel/Device Manager and see if BB Q10 was listed and had a yellow triangle next to it and then try to reinstall the drivers.

    So I plugged my BB to the computer with a USB cable

    Open panel / but Device Manager there is no device listed outside the "RIM Mass Storage Device."

    What made me think...

    With the always-connected BB, on BB, I opened the settings / storage access and disabled USB mass storage.

    On the control panel / Device Manager, immediately "RIM Mass Storage Device" icon in the taskbar, a window and disappeared popped up saying "search drivers."

    This has changed then automatically to "Install drivers" and "Finish."

    In Control Panel / Device Manager a new device popped up in the area of 'No' called 'peripheral network RIM.

    Then I opened the link and it is immediately connected to my BB Q10...

    Then I went there immediately disconnect and link back to the Q10 spilled the USB Mass Storage 'OFF '.

    Certainly, there is a bug here...

    I lost several hours tinkering with this whole process, and it's a nightmare of flashing.  While this may not work for everyone, I hope this works for some of you...

  • Problems in CS3 and AS3 with embedded fonts

    Hello. I recently downloaded the trial version of CS3 to test. I am an experience AS2 developer, and have 10 years of C, C++, c#, Java, PHP... programming experience on MAJOR projects starting before flash.

    I tried to use a font embedded in AS3 with a dynamically created textfield. I tried all the examples of ActionScript 3.0 Cookbook from O'Reilly. They suggest using the [Embed] metadata tag, but quite honestly it doesn't do anything in CS3. I got the size selected report option, and it clearly shows by the size of file that the police is not present in the SWF file.

    Then I tried to do like I did in Flash 8. There still no luck. My TextField exists, but it is simple no rendered police... Here is my piece of code.

    In my library, I have a symbol called arialBold. In the connection settings, I have "Export for ActionScript" checked and "Export in first frame" checked. The class is "arialBold" but I wonder if it's true? and the Base class is 'flash.text.Font.

    I tried all the variations I could think. I have to do something wrong. You can find my file here:

    http://www.newcommerce.ca/AS3/fonttest.fla

    Thanks for your help! You can solve this problem, I would be very happy!



    Well, that's the way it was supposed to work, but I think what integrate coding Flex 2 and does not work with actionscript 3.0.

    Here's something that works: embed a font as you did for a.s. 2 and give it a class name (say _comicSansReg). You can then use:

  • Intermittent connection problems migrate SIDHistory and new domain

    Hi all

    Wondering if anyone ahs met it. We have migrated the users and workstations of an old domain (domain A) and included their old sid in the SID History attribute for access to resources. We have also double ACL'd users and groups into action (just in case SID History has failed).

    Once done with the migration, we have added a GPO security policy in the new domain (domain B) to deny local logon to the Domain (domain A) domain users group old. That would give us enough time to finish with server migration while ensuring that users do not connect you with their old domain credentials.

    What's happening at random, from time to time is that a user in the new domain will receive a logon denied error. The error indicates "you cannot connect because the method of login, you use is not allowed on this computer. For more information, contact your network administrator.

    The only reason why I think that the new users in the domain are denied would be SID History, but am not sure. Anyone know why this is happening?

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • Problem router Cisco and Checkpoint VPN

    Hello

    I couldn't establish vp from site to site between cisco and checkpoint. Can you please check the logs?

    Thank you.

    * 29 sept 08:17:22.627: IPSEC (sa_request):,.
    (Eng. msg key.) Local OUTGOING = Y.Y.Y.Y:500, distance = X.X.X.X:500,
    local_proxy = 192.168.222.0/255.255.255.0/256/0,
    remote_proxy = 10.0.10.0/255.255.255.0/256/0,
    Protocol = ESP, transform = esp - aes 256 esp-sha-hmac (Tunnel),
    lifedur = 3600 s and KB 4608000,
    SPI = 0 x 0 (0), id_conn = 0, keysize = 256, flags = 0 x 0
    * 29 sep 08:17:22.631: ISAKMP: (0): profile of THE request is (NULL)
    * 29 sep 08:17:22.631: ISAKMP: created a struct peer X.X.X.X, peer port 500
    * 29 sep 08:17:22.631: ISAKMP: new created position = 0x88AD1AB0 peer_handle = 0 x 80000004
    * 29 sep 08:17:22.631: ISAKMP: lock struct 0x88AD1AB0, refcount 1 to peer isakmp_initiator
    * 29 sep 08:17:22.631: ISAKMP: 500 local port, remote port 500
    * 29 sep 08:17:22.631: ISAKMP: set new node 0 to QM_IDLE
    * 29 sep 08:17:22.631: ISAKMP: (0): insert his with his 88AF7D94 = success
    * 29 sep 08:17:22.631: ISAKMP: (0): cannot start aggressive mode, try the main mode.
    * 29 sep 08:17:22.631: ISAKMP: (0): pre-shared key found peer corresponding X.X.X.X
    * 29 sep 08:17:22.631: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
    * 29 sep 08:17:22.631: ISAKMP: (0): built the seller-07 ID NAT - t
    * 29 sep 08:17:22.631: ISAKMP: (0): built of NAT - T of the seller-03 IDexit
    Router (config) #n
    * 29 sep 08:17:22.631: ISAKMP: (0): built the seller-02 ID NAT - t
    * 08:17:22.631 Sept. 29: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
    * 08:17:22.631 Sept. 29: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM1

    * 29 sep 08:17:22.631: ISAKMP: (0): Beginner Main Mode Exchange
    * 29 sep 08:17:22.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:17:22.631 Sept. 29: ISAKMP: (0): a Packet.o IKE IPv4 send

    * 29 sep 08:17:32.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:17:32.631: ISAKMP (0): increment the count of errors on his, try 1 5: retransmit the phase 1
    * 29 sep 08:17:32.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
    * 29 sep 08:17:32.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:17:32.631 Sept. 29: ISAKMP: (0): sending of a CPVPN IKE IPvaccess lists

    * 29 sep 08:17:42.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:17:42.631: ISAKMP (0): increment the count of errors on his, try 2 of 5: retransmit the phase 1
    * 29 sep 08:17:42.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
    * 29 sep 08:17:42.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:17:42.631 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE...
    * 29 sep 08:17:52.627: IPSEC (key_engine): request timer shot: count = 1,.
    local (identity) = Y.Y.Y.Y:0, distance = X.X.X.X:0,
    local_proxy = 192.168.222.0/255.255.255.0/256/0,
    remote_proxy = 10.0.10.0/255.255.255.0/256/0
    * 29 sept 08:17:52.627: IPSEC (sa_request):,.
    (Eng. msg key.) Local OUTGOING = Y.Y.Y.Y:500, distance = X.X.X.X:500,
    local_proxy = 192.168.222.0/255.255.255.0/256/0,
    remote_proxy = 10.0.10.0/255.255.255.0/256/0,
    Protocol = ESP, transform = esp - aes 256 esp-sha-hmac (Tunnel),
    lifedur = 3600 s and KB 4608000,
    SPI = 0 x 0 (0), id_conn = 0, keysize = 256, flags = 0 x 0
    * 29 sep 08:17:52.627: ISAKMP: set new node 0 to QM_IDLE
    * 29 sep 08:17:52.627: ISAKMP: (0): SA is still budding. Attached new request ipsec. (local Y.Y.Y.Y, distance X.X.X.X)
    * 29 sep 08:17:52.627: ISAKMP: error during the processing of HIS application: failed to initialize SA
    * 29 sep 08:17:52.627: ISAKMP: error while processing message KMI 0, error 2.
    * 29 sep 08:17:52.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:17:52.631: ISAKMP (0): increment the count of errors on his, try 3 of 5: retransmit the phase 1
    * 29 sep 08:17:52.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
    * 29 sep 08:17:52.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:17:52.631 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
    * 29 sep 08:18:02.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:18:02.631: ISAKMP (0): increment the count of errors on his, try 4 out 5: retransmit the phase 1
    * 29 sep 08:18:02.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
    * 29 sep 08:18:02.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:18:02.631 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
    * 29 sep 08:18:12.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:18:12.631: ISAKMP (0): increment the count of errors on his, try 5 of 5: retransmit the phase 1
    * 29 sep 08:18:12.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE
    * 29 sep 08:18:12.631: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:18:12.631 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
    * 29 sep 08:18:22.627: IPSEC (key_engine): request timer shot: count = 2,.
    local (identity) = Y.Y.Y.Y:0, distance = X.X.X.X:0,
    local_proxy = 192.168.222.0/255.255.255.0/256/0,
    remote_proxy = 10.0.10.0/255.255.255.0/256/0
    * 29 sep 08:18:22.631: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:18:22.631: ISAKMP: (0): the peer is not paranoid KeepAlive.

    * 29 sep 08:18:22.631: ISAKMP: (0): removal of reason ITS status of 'Death by retransmission P1' (I) MM_NO_STATE (peer X.X.X.X)
    * 29 sep 08:18:22.631: ISAKMP: (0): removal of reason ITS status of 'Death by retransmission P1' (I) MM_NO_STATE (peer X.X.X.X)
    * 29 sep 08:18:22.631: ISAKMP: Unlocking counterpart struct 0x88AD1AB0 for isadb_mark_sa_deleted(), count 0
    * 29 sep 08:18:22.631: ISAKMP: delete peer node by peer_reap for X.X.X.X: 88AD1AB0
    * 29 sep 08:18:22.631: ISAKMP: (0): node-930113685 error suppression FALSE reason 'IKE deleted.
    * 29 sep 08:18:22.631: ISAKMP: (0): error suppression node 661004686 FALSE reason 'IKE deleted.
    * 08:18:22.631 Sept. 29: ISAKMP: (0): entry = IKE_MESG_INTERNAL, IKE_PHASE1_DEL
    * 08:18:22.631 Sept. 29: ISAKMP: (0): former State = new State IKE_I_MM1 = IKE_DEST_SA

    * 29 sep 08:18:22.631: IPSEC (key_engine): had an event of the queue with 1 KMI message (s)
    * 29 sept 08:18:27.559: IPSEC (sa_request):,.
    (Eng. msg key.) Local OUTGOING = Y.Y.Y.Y:500, distance = X.X.X.X:500,
    local_proxy = 192.168.222.0/255.255.255.0/256/0,
    remote_proxy = 10.0.10.0/255.255.255.0/256/0,
    Protocol = ESP, transform = esp - aes 256 esp-sha-hmac (Tunnel),
    lifedur = 3600 s and KB 4608000,
    SPI = 0 x 0 (0), id_conn = 0, keysize = 256, flags = 0 x 0
    * 29 sep 08:18:27.559: ISAKMP: (0): profile of THE request is (NULL)
    * 29 sep 08:18:27.559: ISAKMP: created a struct peer X.X.X.X, peer port 500
    * 29 sep 08:18:27.559: ISAKMP: new created position = 0x85EDF1F0 peer_handle = 0 x 80000005
    * 29 sep 08:18:27.559: ISAKMP: lock struct 0x85EDF1F0, refcount 1 to peer isakmp_initiator
    * 29 sep 08:18:27.559: ISAKMP: 500 local port, remote port 500
    * 29 sep 08:18:27.559: ISAKMP: set new node 0 to QM_IDLE
    * 29 sep 08:18:27.559: ISAKMP: find a dup her to the tree during the isadb_insert his 88C1CE60 = call BVA
    * 29 sep 08:18:27.559: ISAKMP: (0): cannot start aggressive mode, try the main mode.
    * 29 sep 08:18:27.559: ISAKMP: (0): pre-shared key found peer corresponding X.X.X.X
    * 29 sep 08:18:27.559: ISAKMP: (0): built of NAT - T of the seller-rfc3947 ID
    * 29 sep 08:18:27.559: ISAKMP: (0): built the seller-07 ID NAT - t
    * 29 sep 08:18:27.559: ISAKMP: (0): built of NAT - T of the seller-03 ID
    * 29 sep 08:18:27.559: ISAKMP: (0): built the seller-02 ID NAT - t
    * 08:18:27.559 Sept. 29: ISAKMP: (0): entry = IKE_MESG_FROM_IPSEC, IKE_SA_REQ_MM
    * 08:18:27.559 Sept. 29: ISAKMP: (0): former State = new State IKE_READY = IKE_I_MM1

    * 29 sep 08:18:27.559: ISAKMP: (0): Beginner Main Mode Exchange
    * 29 sep 08:18:27.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:18:27.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
    * 29 sep 08:18:37.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:18:37.559: ISAKMP (0): increment the count of errors on his, try 1 5: retransmit the phase 1
    * 29 sep 08:18:37.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE
    * 29 sep 08:18:37.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:18:37.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
    * 29 sep 08:18:47.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:18:47.559: ISAKMP (0): increment the count of errors on his, try 2 of 5: retransmit the phase 1
    * 29 sep 08:18:47.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE
    * 29 sep 08:18:47.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:18:47.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.

    * 29 sep 08:18:57.559: IPSEC (key_engine): request timer shot: count = 1,.
    local (identity) = Y.Y.Y.Y:0, distance = X.X.X.X:0,
    local_proxy = 192.168.222.0/255.255.255.0/256/0,
    remote_proxy = 10.0.10.0/255.255.255.0/256/0
    * 29 sept 08:18:57.559: IPSEC (sa_request):,.
    (Eng. msg key.) Local OUTGOING = Y.Y.Y.Y:500, distance = X.X.X.X:500,
    local_proxy = 192.168.222.0/255.255.255.0/256/0,
    remote_proxy = 10.0.10.0/255.255.255.0/256/0,
    Protocol = ESP, transform = esp - aes 256 esp-sha-hmac (Tunnel),
    lifedur = 3600 s and KB 4608000,
    SPI = 0 x 0 (0), id_conn = 0, keysize = 256, flags = 0 x 0
    * 29 sep 08:18:57.559: ISAKMP: set new node 0 to QM_IDLE
    * 29 sep 08:18:57.559: ISAKMP: (0): SA is still budding. Attached new request ipsec. (local Y.Y.Y.Y, distance X.X.X.X)
    * 29 sep 08:18:57.559: ISAKMP: error during the processing of HIS application: failed to initialize SA
    * 29 sep 08:18:57.559: ISAKMP: error while processing message KMI 0, error 2.
    * 29 sep 08:18:57.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:18:57.559: ISAKMP (0): increment the count of errors on his, try 3 of 5: retransmit the phase 1
    * 29 sep 08:18:57.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE
    * 29 sep 08:18:57.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    Router #.
    Router #.
    * 08:18:57.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
    * 29 sep 08:19:07.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE...
    * 29 sep 08:19:07.559: ISAKMP (0): increment the count of errors on his, try 4 out 5: retransmit the phase 1
    * 29 sep 08:19:07.559: ISAKMP: (0): transmit phase 1 MM_NO_STATE
    * 29 sep 08:19:07.559: ISAKMP: (0): package to X.X.X.X my_port 500 peer_port 500 (I) sending MM_NO_STATE
    * 08:19:07.559 Sept. 29: ISAKMP: (0): sending a packet IPv4 IKE.
    Router #.
    Router #un all
    All possible debugging has been disabled

    The log shows main mode setup has failed.  See if this helps: http://www.itcertnotes.com/2011/04/ipsec-stuck-in-mmsasetup-and-mmnostat...

  • Problem of color and Lag with Flash.

    Hi, I have this very annoying problem with flash. The photos below show what I mean by the problem of the color and the video shows the offset. I have impression projected both videos to show you how to receive. I've included links for you to see the video.
    youtube.jpg

    Without even looking at the video, I guess you can see that there is something wrong already, to compare watch them the vid.

    Link to the video (Yotube)

    youtube2.jpg

    This is the worst that a video is already well that sometimes I get a green screen instead of a video

    Link to the video (Yotube)

    The problem of Lag, I sometimes have with videos (I have recorded my screen):

    Link to the video (Yotube)

    PLEASE NOTE:

    • I tried to reinstall or uninstall the flash player (I used adobe flash uninstaller)
    • I also experienced a two errors while watching a video. the video card (Nvidia GeForce 8500 GT) gave my windows 7 (32 bit) an error and the screen flashed but I then recovered but the video does not.
    • I think there could be a problem with my monitor recent update and also the use of two screens. Maybe the graphics card just cannot be considered.
    • I checked the different browsers and the same thing happening even IE9 HTML5!

    Try turning off hardware acceleration.

  • Problem of sum and group with MSSQL


    I'm a quiet complex query after users entry form. The result looks something like this (data simplified, useless and truncated fields)

    cat_id | producttext
    -------------------------------------
    1002 | Parma ham
    1013. Bordeaux
    5006 | Parma ham
    1005. Something
    1002 | Another product of Kat 1002

    As you can see the first and last record have the same cat_id.

    What I want ultimately is to know the percentages of products in the same range (1001-2000, 2001-3000...)
    and the percentage of products in the same chat (such as 1002)

    I do this simply by a subquery on every Beach, see attached code (query1).
    The problem is I don't need only the cat_id but is dependent on the language name.

    I can get it with the query as (see query2) but, it used to function if the FROM is another query. It only works if I choose a real table.

    All advice what to do different?

    What I really want ultimately is a table like this:

    2 1002 Fleisch
    1 1005 Beilagen, pasta, Reis, Konserven
    1 1013 great






    This have I done.
    I do the join in the 'base' didi - query.

    Thank you

  • connection of switches cisco and hp with gbic

    I have a new Cisco 2960 x and an existing HP 2910al. I am OK with the set up, I have the hp interface and Cisco all the time with copper but this is the first that I had with fiber. I know that Cisco switch will a Cisco gbic (can move only with service not taken into charge-transmitter/receiver) and HP will want a Gbic hp (new Hp operating system only works with HP Gbic).

    So here's the question, Cisco Gbic and Hp Gbic of interconnection? I guess Yes, but want to ask before you buy and know that they don't.

    As long as they are of the same wavelength (like SR to LR to LR or SR) Yes they do.

  • VS2012 problem of configuration and deployment with scatter chart

    I've recently updated one of my programs of VS2008 to VS2012.  I also had Measurement Studio 2009 and upgraded to 2013.  Since Microsoft dropped its installation and deployment in VS2012, I'm looking to use Flexera Express to create an installer.  My app contains a form that contains a scatterplot graph control that must be deployed on both Win7 and XP computers.  I tried to force the compilation to .NET framework 4.5, but that only supports XP.  I demoted the .NET framework down to 3.5.  I noticed that I had to change the references OR whenever I changed the .NET framework.  I only had references to the NationalInstruments.UI, NationalInstruments.UI.WindowsForms and NationalInstruments.Common.  When I build the installation it requires me to explicitly declare the redistributable packages.  So I chose the package OR Measurement Studio Windows Forms Support and automatically selects the load at the time of Design and common User Interface Support (dependencies I guess).  But after I create this version of installation and install it on a system, I get the following message when you attempt to initialize the scatter chart control:

    Could not load file or assembly 'NationalInstruments.UI, Version 8.9.35.246, culture = neutral, PublicKeyToken = 18cbae0f9955702a' or one of its dependencies.  The system cannot find the specified file.

    Y at - it a redistributable package I'm missing?  I tried to add the base components for the execution of Measurement Studio, but get the same error.

    I tried to use Wix, but ran out of patience, trying to figure out this one.  Any help is greatly appreciated.

    In general, when controls utilities deploying Measurement Studio you refer to this documentation for the required dependencies for the merge modules:

    http://digital.NI.com/public.nsf/allkb/6677098983C36F9086256CFE007F457A?OpenDocument

  • connected to my laptop and TV with vga cable, but cannot get the picture to TV

    VGA cable and pc selected on my tv, double vga mode click and drag from the laptop to the tv screen but nothing happens

    Could not get the image on the tv at all

    Help, please

    was soon, I solved the prob

    went to the nvidia Control Panel by right-clicking on the desktop and select multiple monitors

  • Connection adapter WMP54G problems for router WRT310N

    I just bought a new router (WRT310N) and now I have a problem connecting my Wireless PCI adapt (WMP54G) of my basement count to this router. The light on the adapter is turned off. I use Windows XP on my basement computer. When I right click on the connection wireless network and go to 'View available wireless networks' I see my home network listed. This is a secure (WPA) wireless network. When I click on to connect to the network, I have to type the network key, what I'm doing. Then he said "Please wait while windows connects to the ' * 'network, wait for the network..." ». After that, it tries to connect for about 2 minutes she stop trying and I am not always connected to the network. No one knows what might be wrong. Yet once the required to the WMP54G card account does not shine.

    Figured it out. Had to update the driver for the card WMP54G.

  • Router connection problems

    Hello
    So I'm having a problem, very frustrating to connect to my router. I can't connect to my router using the ip or routerlogin.net address after a certain period of time. If I restart my router, I can connect without any problems, do everything that I do and everything is fine, but it seems that after a while, can I connect my router delay and then I go to the page... I get a "This Page is not available" in Chrome.

    I tested with Chrome, Firefox Safari (on Mac and PC, 2.4 and 5 ghz connection, as well as directly connected to the router). I also tried the same settings on an IBM computer, including using IE

    Internet seems to work very well, (I can even ping the default gateway), but whenever I create a new virtual machine on my test server, I need to assign a static IP address and need to connect and hate that I have to keep rebooting my router must.

    Y at - it a setting or something escapes me?
    Thanks in advance for any help.

    Hi Andy -.

    Hard reset seems to have worked. Thank you!

    For the curious:

    The first thing that happened the router would be looking for another router on the network. Have not found an and proceeded to reset the router to factory specifications.

    Once that came, I restored my previous settings that I saved while I still had access to the router.

    Always curious, he has established for the last month when I tested my olde 3700 (who, by the way, works fine behind a router AT & T in my other House - and a lot more range and speed than the AT & T.)

    -Chuck

Maybe you are looking for

  • Wireless printer does not

    my wireless printer has stop working with my macbook pro

  • need to install 2 instances of Thunderbird on 1 machine so have e-mail for 2 people

    My wife uses her laptop for businesses. Its battery is dead and she's need to access his mail from my machine until the arrival of its new battery. I've seen discussions on separate profiles, but don't like this option. We want two completely separat

  • Installer error 1001

    I can't install the software of any type be it a downloaded file or a cd. The codes I get are: InstallUtilLib.dll error 1001 MSI install exception occurred error 1001 The dll error more often. I don't have much luck with trying to find a replacement

  • any window color

    the background color of any window, I opened is simply green how can I change the default language that I have Windows XP I tried via the control panel - desk top etc. but olein is wrking

  • Download Open Office - is not possible with Windows 8?

    Hello I tried to download free Open office, but the computer says no to this, it is not possible in Windows 8. Are there other free Word and Excel I can download? I Don t need all applications of MS Office, only Word and Excel. Also - when I tried to