Connection to a TV with HDMI output with a Dual-Link DVI adapter

Similar Questions

• Connect new Macbook (USB - C) to dual-link DVI display?

  I have a new Macbook (12 inches, retina - love), with a single USB - C. I also have a (old) Apple Cinema HD Display that would like the dual-link DVI connector.

  How can I connect these two together?  It doesn't seem to be a combination of Apple adapters/connectors that will do the job for me.

  You must first of all the USB - C for HDMI av digital multiport adapter.

  http://www.Apple.com/shop/product/MJ1K2AM/A/USB-c-Digital-AV-multiport-adapter

  Then an adapter HDMI / DVI

  http://www.Apple.com/shop/product/MJVU2AM/A/Apple-HDMI-to-DVI-adapter

  Connect together and on the USB - C port adapters.  Then connect a cable to the HDMI DVI to DVI for the Cinema Display and the USB of the cinema screen to the av multi port USB - C USB cable.

• Monitor flicker with T500 with adapter dual-link-dp accell

  I have an external monitor from HP LP3065 30-inch, 2560 x 1600, I want to drive off my T500. I am now on my second accell display port to DVI double bond and still get power cuts monitor periodicals that last less than a second. At first I thought it was because of the insufficient power to the adapter supplied via the usb port, as pointed out in various places, so I got a usb high power with AC adapter Hub / CC. Did not help. Accell said it must be a problem of lenovo and that they had "reported" the question of lenovo. I exchanged the adapter for a new, just in case it might be a manufacturing problem, but the news is all the same. Has anyone got this configuration works correctly? If so, what dp-dual link dvi adapter are you using? Any special setting in your settings? I have the ATI Mobility Radeon 3650. All pilots are underway as is the BIOS.

  Thanks for the comments. I replaced the accell adapter with a displayport - double bond of HP adapter and it now works fine just with my HP LP3065 (flicker). Therefore the adapter itself was really the problem, not the monitor or the drivers.

• How to connect a Toshiba TL838 with facebook profile?

  How to connect a Toshiba TL838 with facebook profile?
  When I try to connect toshiba generate email with info and links for connect facebook with toshiba accounts places but when I click on the links I see only errors.

  _ * EDIT * _

  * Ok I flashed the QR code with my phone and now is connect :) *.

  Moderators please close thead

  Post edited by: junioreks

  > Ok I have flashed the QR code with my phone and connect now :)

  Thanks for sharing!

• U2713HM, max resolution with a laptop without DVI and DisplayPort?

  This is the type of response to a previous post with the same title.  However, the interface of the forum does not seem to allow a response on older posts, even if they remained unanswered and have customers.  Ho-hum. In any case, I discovered that I can drive the U2713HM using a simple HDMI cable to your laptop using the interface of view nVidia Control Panel (page 'Change resolution') property and setting a custom resolution to match the full 2560 x 1440. The trick is to use the Customize button and create a 'custom resolution' for the progressive 32 bits 2560 x 1440, use 'Automatic' and then drop the (Hz) refresh rate up to about 38 to 41 Hz. To find one that works and then keep trying new in 1 Hz increments until it fails. I'm at the wheel of a laptop Toshiba Qosmio, using its output using a refresh of 41 Hz. frequency something higher and display will not 'lock-in' to its native resolution HDMI (available only) the screen (normally connected by Dual link DVI to a desktop machine). So allow me to use the input on the screen switch to switch between my desktop PC and laptop. Works a treat!

  Just thought I would add that:

  This may be possible with a workaround to other problems of option cable - for example, poor quality or cables of big length - where the main problem is one of the supported by the cable or the type of interface bandwidth.  By lowering the refresh rate, you are lowering the bandwidth requirement.  For old CRT screens, it usually resulted in a significant - not so remarkable gradation with LCD/LED technology!  And don't forget that the eye can integrate cini-film at rates as low as 25 Hz!  Affecting the refresh rate of 30 to 48 Hz on a LCD/LED modern is now a viable solution for the problems of bandwidth of cable. Note, however, that all the problems can be addressed by here: for example, I got a cable from DVI single-link for which no stable frequency could be found (the monitor really need Dual - Link DVI - one with a full set of pines).

• W540 - display resolution double screen with cable DVI - D Dual Link

  I recently bought a W540 and connected to my Dell u3011 30 "monitor. I used the Dual Link cable DVI - D that came with the monitor and connected on my Dock Ultra. The maximum resolution I can get is 1920 x 1080? When I pass a display port cable I can achieve complete resolution of 2560 x 1600? Is there something I need to do to get the complete resolution of 2560 x 1600 with dual link DVI - D cable? I want to be able to connect 2 laptops to a normal screen and 1 entrance to port the screen so I need to be able to use the DVI cable on the 2nd machine while allowing resolution 2560 x 1600.

  Port DVI - D on the Ultradock is single link only.

  If you need DVI - D with double bond (i.e. 2560 x 1600) resolution, you need an active displayport to dual binding converter. StarTech makes, they should be about 80 USD or something in this region.

• HP laserjet 1200 using windows7, wired to the printer with a USB to parallel adapter

  HP laserjet 1200 using windows7. My computer has USB ports, but no parallel port, if the computer is connected to the printer with a USB to parallel adapter. Sometimes works very well, sometimes States printer system as ready, but do not print. Reboot hardware and upon restarting, I got a page to print. Next attempt to print updates the document in cue, but is right there - no error message. Finally, after several reboots, I managed to do print (have no idea how), but now I had to print 20 pages one page at a time. It will print no more than one page, even if I have to print the 20. Next time I start the computer I don't know if the printer will print. Do you need to use the same USB port each time, or are USB to parallel unreliable maps?

  Hey renradd!

  Unfortunately, in addition to the adapters USB can be unreliable. Only a new printer, I don't know what it will provide you with a fix for this problem. You can try a different card if you have one, but if it still does not work, I would look for in a printer capable of supporting your computer.

  I hope this helps!

• I have a NVidia GTS450 with HDMI output. When I connected it I had sound & vision. After the first time that I turned off the desktop computer sound options just told me THAT HDMI is not connected?

  I am running Vista Home Premium 32 bit. It does not seem to recognize the connection although it is really connected and one / v amp is running. I get the desktop on the HD TV but no sound.

  Hello

  By default the Vista transmits no sound on HDMI output.  To change this to change the settings in the control panel.

  Note: This will turn off sound from speakers or normal audio output on the laptop.  To get that back, you will need to reverse this process.

  a. click on the button 'start '.

  b. click on 'control panel '.
  c. with the control to the "Control Panel Home" Panel, click on 'hardware and sound '.
  d. where it says 'Sound' in green letters, there are three options below that are in blue, click on "manage Audio devices.
  e. This will bring up a window titled "Sound".
  f. on the tab 'Read', he has listed the sound options at your disposal. It should read "peripheral digital output (HDMI)" click on it.
  g. There should now be a checkmark on this option.
  h. the sound should play through your HDMI connections to the TV.

  No sound in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Tips for solving common audio problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Satellite L500-13F connected to the TV with an HDMI - no sound on the TV cable

  Hello! Sorry, my English is bad.

  I have a problem, I tried to connect my laptop with TV via HDMI, but
  reading on laptop rather than TV sound...
  In Manager Realtek HD I found no "Options for HDMI output.

  Please, which suggests what should I do?

  Hello

  Have a look here, maybe it helps you:

  http://en.kioskea.NET/forum/affich-79711-laptop-sound-on-TV-with-HDMI-cable

• Satellite U400-11U: no sound with HDMI output

  Hi all

  I am the proud owner of a model of satellite U400-11U PSU40E running with Windows Vista.
  Recently, I tried to view a video on my TV. To do this, I used the HDMI output of the laptop connected to the TV.

  I took care to connect the cable to the TV and only after to the laptop.
  Then use the quick access key (Fn + F5), poster image on the TV.
  Unfortunately, there was no noise.

  After some googling, I discovered that I needed to activate the HDMI audio output via the control panel of the sound.
  Unofrtunatly, when viewing, I have found no output Audio HDMI, but only speakers and another exit (whose name I forgot--sorry).

  I tried to update the video and HDMI audio drivers (I noticed that there is a HDMI audio driver in the perpipherals system, which was considered 'work' of Vista), but it changed nothing.

  So, what can I do to activate the audio output over HDMI?

  Hello

  Please see this FAQ from Toshiba:
  http://APS2.toshiba-tro.de/KB0/TSB9401B00001R01.htm

  You will find an instruction how to solve this problem... it s about Qosmio G30 but I think it should work on U400 too...

  The point is that you must set the S/PDIF audio output by default!

  And don t forget to RESTART the laptop after the change was made.

  See you soon

• A2109 2 problems with networking and an HDMI output

  I had an A2109 for Christmas and have 2 occurring of questions that I need help on.

  1. I was never able to get the HDMI to work. I tried 2 different cables, as well as 2 different TV and when I plug the microphone to the Tablet and the TV, my TV cable don't say no signal source. I got this tablet specifically for the HDMI output and flash support, so I can watch sports on the internet on our main TV.

  2. in the last week or so when I wake up in the Tablet, my apps does not connect to the internet. In the taskbar it shows that I am connected to the network. I open up chrome and you get a DNS error. To solve this problem, I turn off the Tablet and then turn it back on. This happens whenever I wake up.

  I've not being updated to JB again because I don't want to lose the capabilities of Flash

  As I have a follow-up has been able to solve these two issues.

  HDMI: the cables, I bought two bad ones were apparently. I bought another and that he had "snap" in as well and the TV started to show what was on the shelves. How lucky I am with this one?

  Network: Restarted my router and after a few days there were no problem.

• I am trying to connect a Macbook Pro with Retina display for a new monitor Dell Ultrasharp 3014. I tried to connect via HDMI and DVI cable supplied with the monitor but the monitor says "no cable dvi - d".

  How to connect a Macbook Pro with the (just bought) Retina display for a Dell Ultrasharp U3014's new? I tried to connect with HDMI and DVI cable supplied with the monitor but the monitor says "no dvi - d" cable. I never tried to do that before so I'm lost.

  Use a mini-displayport cable. Connect to one of the ports Thunderbolt the MacBook Pro to ultra-compact monitor entry.

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• Connection to the TV with an HDMI cable

  I have a HP G60 laptop with Win7. When connecting to a TV with a high-definition HDMI cable, all I get on the TV screen is my screen background image. No icons, no cursor, nothing. It worked the last time I tried it about 6 months ago.  The graphics settings are like a "expanded" monitor, which puts only annoys me anything.

  try to use the Intel® driver update utility you may need new drivers of HD.