connection to the Internet. data recovery problem. check the connection. using netflix app... in windows media center

Similar Questions

• Cannot display the error using Netflix page in Windows Media Center

  Hello I use Windows Vista Home Premium and Windows Media Center. I watched titles on Netflix in the past successfully in Windows Media Center, but today I get this error when I click to play a title:

  Cannot display the page. Windows Media Center cannot open the page.  Contact technical support for the program.

  And so here I am.

  I see all of the titles on my queue when I click on the Netflix icon, so obviously I am connected and connect, but cannot actually look at all the titles.

  Thanks for your help

  What is the error you get when you try to watch Netflix from the browser?
  What browser do you use?

  Go to start, all programs, Microsoft Silverlight and open Microsoft Silverlight.

  The tab of the Configuration window About, let us know which Version you have installed.
  Go to the Read tab, and then make sure that the enabled for playback of content protected.
  Then go to the Application Storage tab, select the Netflix web site from the list and then click on Remove to remove it. There may be more than one listed Netflix website, for each of them.

  After the changes, try once again, Netflix in Media Center and browser.

  You can also try reinstalling Silverlight by going to start, Control Panel, uninstall a program, select Microsoft Silverlight, and then click on uninstall and cross the guests. After uninstalling to joinhttp://www.microsoft.com/getsilverlight/Get-Started/Install/Default.aspx and reinstall Silverlight.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I tried to open Windows Media Center, but this message keeps popping up "you are connected as a guest. Windows Media Center requires a non-invite account. »

  I have problems with my account. I have a laptop with Windows 7 Home Premium, I tried to open Windows Media Center, but this message keeps popping up "you are connected as a guest. Windows Media Center requires a non-invite account. If you change your account type, contact the owner of this system. A similar message appears when I try to install the updates there are no other accounts on my computer and it still says I am admin.

  original title: ownership of account?

  Hello

  Have you made changes on the computer before this problem?

   
  It seems a problem with missing or damaged system files. I would suggest trying the following methods and check if it helps.
  Method 1:
  Let flow the Microsoft Safety Scanner and check if it helps.
  Microsoft security scanner: http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.
   
  Method 2:
  Run the scan tool (SFC) System File Checker and check if it helps.
  How to use the System File Checker tool to troubleshoot missing or corrupted system files on Windows Vista: http://support.Microsoft.com/kb/929833
   
  Method 3:
  Try to create a new user account and check if it helps.
  Create a user account: http://windows.microsoft.com/en-US/Windows-vista/Create-a-user-account  
  If the problem is resolved in the new user account, this means that the old user profile is damaged. Here is the link to repair a user account damaged: http://windows.microsoft.com/en-us/windows-vista/Fix-a-corrupted-user-profile
   
  Hope the information is useful.

• Where can I find the Roll Up 2 update for Windows Media Center Edition 2005?

  I'm trying to download Media Player Version 11 and it says that I need to first install the Roll Up 2 update for Windows Media Center Edition 2005.

  Hello

  Before installing Windows Media Player 11 on Windows XP-based computer, you must download and install the Update Rollup 2 for Windows XP Media Center Edition 2005 on your computer.
   
  Initially, download cumulative update 2 for Windows XP Media Center Edition 2005 from this link.
  
  Update Rollup 2 for the Windows XP Edition Media Center 2005 (KB900325)
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=12939
   
  Check out the link below to install Windows Media Player 11 on Windows XP.
  Windows Media Player 11 for Windows XP
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=8163
   
  For more information, see Help links.
  File Readme for Windows Media Player 11 for Windows XP
  http://Windows.Microsoft.com/en-us/Windows-XP/products/Windows-Media-Player/11/Readme
   
  Update Rollup 2 for Windows XP Media Center Edition 2005
  http://support.Microsoft.com/kb/900325
   
  It will be useful.

• Problems with Netflix Plugin for Windows Media Center

  I'd rather watch Netflix through my windows media center, since I can use a remote control, and I watch on a screen more great all in the comfort of my couch.

  It is a huge pain in the rear to have to use the browser Netflix program and must be implemented on the second monitor. So just by using the browser is not a solution.

  That being said, I can not play videos. On Windows Media Center, I open the Netflix plugin, log on to the account, access my instant queue, click on a movie, and then click play. It changes the blue background of the screen, and a small circle of spinning that tells it to load upwards. But then he just argued right out to the previous screen... which is description/options of the selected film (read, delete, find others like it).

  I tried various films of selections. I tried to disconnect and return signature. Restarted the computer. Even uninstalled and reinstalled the plugin from Netflix, BOTH the Silverlight program. No chance whatsoever.

  I contacted Microsoft and they are stumped on this. I was wondering if there is anyone here who had this problem and fixed.

  Hmmm well the problem fixed itself somehow.

  I tried to play a movie again today, and when I click on play, a windows media center style dialog box appears and asks something in the sense of knowing if I wanted WMC to access my netflix account. I clicked 'Yes', and it has loaded the film. I had not seen this before dialog box...

  So I pressed the back button and tried again to see if it was indeed fixed. Yes. I tried again and again with different movies... and it WORKED!

  I guess that the problem is not from my system, but rather netflix or something.

• When I try to open any program or file the only thing that opens is Windows Media Center

  * Original title: only the open Windows Media Center

  Every time I try to open a program or file, the only thing that opens is windows media cente.ive had set up a new account just to be able to use my lappie, I have no point of restord

  Hello

  You can check out the link below and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Try running the fixit and see if it helps:

  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us

  Hope this helps,

• The Electronic Program Guide (EPG) for Windows Media Center stopped display information guide

  The Electronic Program Guide (EPG) for Windows Media Center stopped display guide information beginning January 1, 2013 in the United Kingdom and Ireland.

  Microsoft is aware of the issue with the Electronic Programming Guide for Windows Media Center in the United Kingdom and Ireland.  We have identified the cause and have already deployed a fix for the United Kingdom.  A solution for the Ireland is being prepared and we will post an update when the problem is resolved.

  We apologize for the inconvenience to Windows Media Center users in these countries.

• Blue screen when you perform the search for live TV in Windows Media Center on the new Lenovo A700

  I just got my new Lenovo IdeaCenter A700 yesterday and have been busy setting up.  The computer is equipped with a built-in TV Tuner and I tried to put in place the TV on it so I could watch TV on my computer.  I have RCN for cable and a cable TV that gets first plugged into the decoder and then I plug the cable to the TV - so I just plugged this cable on my computer instead of the TV.

  I used the following Web site to set up using Windows Media Center - http://www.howtogeek.com/howto/9166/learning-windows-7-setup-live-tv-in-windows-media-center/.  After that I put in my zip code he sought the power of the signal or something and then I got a blue screen.  To restart the computer the information below has been MS. error message This happened to me twice.

  Anyone know how to fix this? Or otherwise, I just want to use my computer to watch TV on, and if I can do this other method other than Windows Media Center free I am happy to do.

  Please let me know if you need more information.

  ************

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7600.2.0.0.768.3
  Locale ID: 1033

  More information about the problem:
  BCCode: 4A
  BCP1: 0000000076E5FF2A
  BCP2: 0000000000000002
  BCP3: 0000000000000000
  BCP4: FFFFF8800AADECA0
  OS version: 6_1_7600
  Service Pack: 0_0
  Product: 768_1

  Files helping to describe the problem:
  C:\Windows\Minidump\102110-15849-01.dmp
  C:\Users\fennis\AppData\Local\Temp\WER-36941-0.SysData.XML

  Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:
  C:\Windows\System32\en-US\erofflps.txt

  This seems to be resolved now... it was maybe an update of windows, like when I rebooted my machine it updated automatically and after that he worked all of a sudden!

  Anyway, now it shows a black screen and no sound for all channels, but that is a different problem... and I'll look in to that.

  Thanks for your help.

• In Windows Media Player. Installing the library: an essential part of windows media center is currently not available. Please restart windows media center.__Windows Vista, Home Premium, SP2

  In Windows Media Player. When I try to go to the library of configuration, I always get this error message:

  An essential part of windows media center is not available at this time.  Please restart windows media center.

  If I try to run Media Player directly, it won't start.

  I am running: Windows Vista Premium home edition, SP2

  I tried the admin, sfc/scannow command prompt and got this result:

  Resources Windows found corrupt files but was unable to remedy.  Details are provided in the CBS.log windir\Logs\CBS\CBS.log newspaper

  My computer does not let me even see this journal!

  right now I feel stupid... my computer is new and I had not registered, it still with HP so they had this locked feature.  I don't like it, but fixed it.

• The Electronic Program Guide (EPG) for Windows Media Center stopped ownloading/display guide information beyond October 24, 2014

  It seems to happen again.

  Today, COMICS Guide stops at October 24, 2014.  I expect it to be complete until October 29, 2014.  Any attempt to force a download is successful but only until October 24, 2014.

  Microsoft know about this?

  They do nothing to solve it - before I stop recording of all the favorite again TV show?

  How can I check this?

  Derek S

  Rahul

  Last night, all of a sudden the problem is resolved.  Thank someone at Microsoft who has done this for many Media Center users in the United Kingdom.

  concerning

  Derek

• The Electronic Program Guide (EPG) for Windows Media Center does not display an information guide from 22/03/2014

  The COMMENTS in the shows of the start/end dates of guide to 07/03/14 and parameters on 22-03-14, respectively.  It's like leaving the guide update after 3/7.  Please notify.

  It's working now.

• The mouse does not work in Windows Media Center and computer

  I have not any known cable (CTI broadband) and have no box ar place anything I can use WMC, after I put the display on the computer of long I can divide 2 monitors display (two). 1 monitor 1. TV. move WMC on TV (although) now I can't move the mouse on the screen. While WMC is in TV, the mouse still there I can't move it to the monitor to use it and watch TV at the same time. How can I watch TV and work on the computer at the same time?

  Hello

  This behavior is by design, Alt + Tab is the work around. If you think that it should be replaced, you can leave your comments on the following link: http://mymfe.microsoft.com/Windows%207/Feedback.aspx?formID=195

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Problem: Windows media Center Configuration connection to the digital cable box.

  I have HP Pavilion Elite with Windows Home Premium.  How do I get the library to accept the signal from the digital decoder (without additional I.R.).  The signal passes through fine using the S-video input, change channel with the cable, but 'Set up' box control requires I connect "I.R. Blaster (?) covering the cable box sensor which then beats command of other devices (television, etc.) using the cable box.

  Hi M.G.Nichols1945,

  What is the exact message that you receive?

  You can follow the steps mentioned below to setup windows media Center without using hardware IR (infrared):

  1. open Windows Media Center and go to tasks > settings > TV > Setup TV Signal

  2. click on Yes to the question that appears.

  3. click on the default settings in the wizard until you get to the option where it asks if you want to configure your signal automatically or manually.

  4 choose think I will manually configure my TV Signal

  5. Select antenna; Choose analog only antenna after you go through this return to TV settings and click Finish.

  6. now, you should have your installation center media without the use of IR material. You must use the cable box to change channels

  You can follow the instructions of the manufacturer of your computer to set up your Digital Cable Ready tuner. So that the Digital Cable Ready tuner receive cable content, your computer must be a specially identified Digital Cable Ready computer.

  For more information, see the link below:

  Set up a TV signal in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

  TV on your computer: understanding signals TV and TV tuners
  http://Windows.Microsoft.com/en-us/Windows-Vista/TV-on-your-computer-understanding-TV-signals-and-TV-tuners

  Solve problems with watching TV on your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• When you try to set up my Tv Tuner in Windows Media Center, I get this error message: "TV Setup has encountered a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. »

  I have a HP m8034n pc with a tuner Hauppauge WinTV HVR-1600 NTSC/ATSC Combo.  The pc came with Vista and Windows media center worked great just with the tv tuner.  I upgraded to Windows 7, December 2 and fail to put in place my tv with WMC tuner.  The recorded shows that I had before the upgrade to Windows 7 appear and play without problem in WMC. I used the hardware diagnostic tool that is installed on my pc to control the Tuner, and during the test, I can see fine TV stations.  This unit is compatible according to microsoft Windows 7. I have the latest driver and tried to uninstall and reinstall. I ran Windows Update and everything is up-to-date. After that WMC checks tuners, it says:

  screen A___
  WMC has discovered the following:
  Analog cable (1 Tuner)

  Other tuners or TV signals were detected but will not be configured.
  (Show details)

  Is this Setup correct and complete?
  o Yes, configure TV with these results
  o no, show more options
  ________________
  When I click on show details, it is said:

  screen B___
  No TV Signal
  If a TV signal should be present, check your signal for following tuners connections and try again:
  Hauppauge WinTV 418 BDA Tuner
  ________________
  There is another question, because he does not list my correct tv tuner. I click, so I'm now on A screen again.

  When I click Yes, set up TV with these results,-(for the analog option Cable(1 tuner), I select my cable service is, and then click Next.) It then displays a confirmation of analog cable and my cable provider, I click Next again and the error message "installation TV met with a serious problem. Click Finish to exit, and then try again. If this problem persists, restart Windows Media Center or the computer. "appears.

  I even tried to set up the signal manually and on the confirmation screen, I click Next, and get the exact same error.

  I would really appreciate any help and if more details are required, please let me know.  Thank you!

  -Doug

  I don't know what happened, I left my PC off overnight and planned reformatting today. But I decided to give him another chance. Instead of saying the tuner was not available. He showed me a static snow image strong, as he was trying to use my Analogue tuner. In fact, it is supposed to use the composite input for my cable box. I re set my TV signals, and now everything works well again. Its strange because I reboot half a dozen times last night and it's never worked. Leaving the PC turned off for the night must have done the trick, I guess.

• Can share files with the XBox 360 to Windows 7, but unable to connect to Windows Media Center

  I reinstalled my system of exploitation of 64-bit Windows 7 to Windows 7 32 bit and reinstalled the documents to the user and the location of the program on a separate hard drive data. I was able to add both my XBox 360 on Windows Media Center Extender at least 15 times before that, but it's the only time wherever I reinstalled with 32-bit and moving the location of the documents to another drive (even if I still have them settle there but just by changing the location under properties after the operating system is installed).

  When I try to add the Xbox 360 as an Extender, it goes up to like making up the 'contact' on the Xbox loading screen, but then the Media Center on the PC says something in the sense of "Windows Media Center has encountered an error... »

  Anyone can shed some light on this situation?

  Hello
   
  You can try to reset Windows Media Center, see these steps.
   
  (a) click Start
  (b) open the Control Panel, then programs and features.
  (c) click on "Tor disable features of Windows of the URN"in the left pane.
  (d) develop "multimedia functions", uncheck "Windows Media Center". Click 'Yes' to continue and click OK to exit.
  (e) and then restart the computer.
   
  Once the computer is restarted, perform the following steps.
   
  (a) reopen 'or turn off Windows features turn on'. Enable features. "Windows Media Center". Restart the computer.
  (b) launch Windows Media Center, initialize program.
   
  Check if the problem persists.
   
  See also:

  Windows Media Center Extender: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/Windows-Media-Center-Extenders-frequently-asked-questions

  Use a Windows Media Center Extender

  http://Windows.Microsoft.com/en-us/Windows7/use-a-Windows-Media-Center-Extender

  Tips for solving problems with Windows Media Center Extender Setup

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-Setup-problems-with-Windows-Media-Center-Extenders

  Optimize your home network for Windows Media Center Extenders

  http://Windows.Microsoft.com/en-us/Windows7/optimize-your-home-network-for-Windows-Media-Center-Extenders
   
  Check if it helps.