connection to the internet using time capsule

Similar Questions

• iPhone cannot connect to the Internet via time capsule

  I have a current execution capsule 7.7.7 time. IPhones in my house can't get internet service when it is connected to the time capsule. My iPad, I tap on it now, can get internet time capsule service. My Mac can connect. I restarted the capsule of time with my modem cable many times. My passwords are correct.

  I also have a smart Vizio TV that does not connect to the Internet. This is true with wifi and also with a wired connection to the time capsule.

  I don't know what the cause of the problem. Any help will be appreciated.

  He has worked in the past and now could not or never worked?

  Apple routers can sometimes decide autonomously switch to bridge mode. If your cable modem is not a router, you MUST have the apple router... TC in your case DHCP and NAT mode.

  If you have not done before you reset the TC at the factory and re-do the installation. Here are my recommendations.

  Universal factory reset

  Turning off the TC... That is, remove the power supply cord or the power at the wall outlet, wait 10 seconds... Hold the reset button... be nice... Turn on always even now in reset... and keep holding in for another 10 seconds. You may need assistance because it is difficult to hold in reset and power on. It will show the success quickly flashing led front. Release reset... and wait a few minutes for the TC to reset and return with the factory settings. If the front LED flashes quickly you missed and simply try again. The reset is quite fragile in these... Press the key while it is just click away and not more... I've seen people bend lever or even break. I use a toothpick as a tool.

  NB. None of your files on the hard drive of the TC are removed... This simply clears the settings of the router of the TC.

  The installer the TC.

  Then redo the configuration of the computer that you want to use for TM using Airport utility.

  1. the use of very short names... NO APPLE RECOMMENDED names. Without the space and pure alphanumeric characters.

  for example TCgen5 for the base station and the name of the TCwifi wireless.

  If the wireless is still an issue defined wireless names like TC24ghz and assigned the 5 GHz other name... eg.TC5ghz.

  Finally, use fixed channels in 2.4 ghz... try 11, 9 and 6, in that order.

  (leave the security for a few minutes and see if that makes a difference).

  For iphone and TV with problems in your Setup program ensure that the TC is NAT and DHCP... try to use a different such as google public DNS 8.8.8.8 and 8.8.4.4

  2. use all passwords also consistent with 1. but maybe a little longer. IE 8 and 20 characters of mixed cases and numbers... no alphanumeric non-caracteres.

  ** 3. If the TC is router, you can ignore this point. It is only a problem when the TC is bridged.

  If ensure that the TC is always the same IP address... you will need to do this on the main router using a dhcp reservation... or a bit more complex setup by using the static IP address in the TC.

  Ignore this point if you don't understand it... after the return if you drop questions.

  4. be sure that IPv6 is set correctly in the computer. IE link-local only for ethernet or wireless depending on whether you are using. Car is not good enough.

  Tell us which modem cable, you have, make and model please?

  The TC has problems with some popular brands... one of the SB series a modem port is malfunctioning.

• My verse ATT modem (non apple devices to use this modem} is connected to the ATT line, Time Capsule (iPhones, Macs Time Capsule use) via ethernet Uverse.) Non apple devices can collect data from iPhones or Mac using the time Capsule?

  My verse ATT modem ({use of devices not apple wifi of this modem} is connected to the ATT line, Time Capsule (iPhones, Macs use the wifi of the time Capsule) and connect to the Uverse modem via ethernet.)

  Both devices are set to the highest security and each uses separate passwords.

  Non apple devices can collect data from iPhones or Mac using the time Capsule?

  With a bit of work by someone who knows how to do such things, not Apple computers could read some files on the Mac if file sharing is configured on the network... devices non-Apple and... He knew the device passwords or administrator for Macs.

  Mac could also play the files on other Macs if file sharing has been implemented and the device password or admin was known.

  If you ask if a PC can read the files on the Time Capsule, the answer is Yes, without doubt, assuming that the PC knew the password of device for the time Capsule.

• I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using ethernet

  I recently got a laptop (Windows XP) that has wireless when I try to connect to the internet using a lan cable plug on my netbook (win 7 starter) that has wireless it gives me limited connectivity and no internet

  Hi evilcrebyc,

  Consult the following Microsoft articles and make sure that all settings are correct.

  How to configure Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/306126

  Troubleshooting Internet connection sharing in Windows XP

  http://support.Microsoft.com/kb/308006

• When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Unable to connect laptop (wireless) broadband

  Recently, I changed to wired broadband. When I try to connect to the internet using my laptop, I get an error code. He says that I'm connected to the internet, but I am unable to connect.

  Remove any preconfigured network settings wireless then rescan to make new connection settings

  Hope this will do the needfull

  Please let us know

• Windows cannot connect to the Internet using HTTP, HTTPS or FTP. __This is probably caused by settings of firewall on this computer. __

  I recently installed the version of Norton, after that I was unable to use the internet, I thought it was the Norton firewall settings. After having playing with her for 30 minutes, I gave up and uninstalled Norton. I have disabled the firewall, I have reset the default settings. Here is the message I get when I run a diagnostic. A crazy thing is that I can connect to internet when I connected to this same computer as a guess.

  Please help me!

  Windows cannot connect to the Internet using HTTP, HTTPS or FTP.
  This is probably caused by the settings of firewall on this computer.

  Check the settings of firewall for the HTTP port (80), HTTPS port (443) and FTP port (21).

  Hi rhonda9937,

  1. what browser you are using to connect to the internet?

  It is not recommended to keep Windows Firewall disabled on the computer.

  This would happen if the ports are not open in the Windows Firewall.

  I suggest that you open ports in Windows Firewall and check if it works.

  How to manually open ports in Internet Connection Firewall in Windows XP

  http://support.Microsoft.com/kb/308127

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Unable to connect to the internet using Firefox or IE

  Unable to connect to the internet using Firefox or IE. I can ping other pc on my network home and can ping websites such as google.com. Other PCs on the home network connect without problems. Nothing has changed in the network or the configuration of IE/Firefox. The only change is that I have installed the update to Vista SP1

  Hello

  Stack TCP/IP Winsock settings in Vista has probably been corrupted.

  Journal to this page and scroll down, there are instructions for Vista.

  http://support.Microsoft.com/kb/811259

  Jack, MVP-Networking. EZLAN.NET

• After the HP update cannot connect to the Internet using my ISP wireless

  I have a HP Pavillion15 Notebook PC, Prod #: E7C83AV using Windows 8. Hp yesterday made an update, and subsequently, my computer does not connect to the Internet, using the same network wireless ISP.  Only way I can get Internet is to use the DSL unit to the computer USB cord.  I had a "Configuration for Invalid IP (106)"

  My ISP is still in my system with the same password, and I can't find any reason why it does not connect.  I have all the correct lights on my computer & the DSL unit.  I have not contacted my ISP, do not know what to say "After HP did an update, your service will not work?"

  Tonight I tried to get help from HP, big whoopie, even when I'm in warranty for 9 months, I was transferred to HP/SmartFriends, who told me that I had to pay for the assistance.  It won't happen!

  I don't know what to do now, I'm not very computer savvy and if HP won't help, do not know where to turn now.

  I'm fighting mad now!

  Someone please help.

  Have you tried to restore to previous work image?

• Problems connecting to the internet using the wireless network connection

  I can't connect to the internet using my wireless network connection. I had made the diagnosis and he stated that "the DHCP is not enabled for the wireless network connection. I had checked the DHCP, but it has been activated!... Someone would give any suggestion for me to solve the problem?

  Open the run command box by pressing Windows key + R, type services.msc and press enter . Search The Client DHCP and check if it is enabled or disabled. If disabled then turn it on and see if the problem still persists or not.

  Open the run command box by pressing Windows key + R, type cmd , and press enter . At the command prompt, type ipconfig/all and press ENTER. Now, check the IP address, default gateway, DNS etc. If you find all the information is correct, but you cannot yet access the Internet so if you connect the wireless network is secure or not. To determine the glance to the wireless network icon in the taskbar, then click on it. It will show you the available wireless networks. If there is a "yellow shield" present on the network icon, the network is not guaranteed, if there is no "yellow shield" does while the network is secure. In a secure network, you might have a "network security key. In this case try to disable the 'Network security key' option for this network. To do this:

  Open Control Panel , click network and Internet , click network and sharing Center , click manage wireless networks on the left.

  In the list select the wireless network and do a right click, select Properties, Security disable tab all options that is, in security type do not select no authentication (Open) and to the type of encryption , select none . You can also activate the automatic connection and SSID settings to further enhance connectivity, on the connection tab, click to select the "connect automatically if this network is in range " and "check boxesto connect even if the network is broadcasting his name (SSID) .

  For more information click here and see how you can determine whether a network is secure or not.

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-know-if-a-wireless-network-is-secure

  If the problem still persists, then check your firewall settings and make sure that the firewall is not blocking your Internet connection. Some software Antivirus has a built-in firewall and they block by default all unknown connection to the tightening of security.

  Try to restore Windows Firewall default settings. Open Control Panel click on network and Internet , click system and security , click Windows Firewall , click default settings .

  Hope this will help. Thank you.

  Arup Ratan Paul

• After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged as an administrator, but cannot connect to the internet using the standard account. How to fix this?

  After upgrade from Vista to Windows 7 Ultimate home, no problem connecting to the internet when logged in as an administrator,

  but unable to connect to the internet using the standard account.  I have the latest version of the Solution Explorer.

  How to fix this?

  Glad to hear it.

  If the problem is resolved, mark the message as response, then it'll be useful for people with similar/identical problem.

• Smart blackBerry phones CONNECT to the INTERNET using WI - FI

  One can tell me how can I connect to the Internet using a wi - fi only connection.

  much thanks

  

  On your device, go in manage connections > Mobile network and turn the POWER off (click on the box to disable the connection to your mobile phone network).

  Then, go to Options/main settings > advanced > browser and set it to the Hotspot and SAVE.

  Now, go back to the browser and if you are connected to a WiFi router or a hotspot, you good to go.

• Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

  Original title: Auntie Photon

  Hi all

  I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

  Help, please.

  Hi Varun,

  Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

  Please help me with the following information related to this issue:

  1. You have installed the required software on your computer which came with Auntie Photon?
  2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
  • Press Windows Key + X.
  • Select Device Manager.
  • Check if there is no error or exclamation point under Auntie Photon.

  This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

  Please follow the steps mentioned below:

  Method 1: Run the hardware troubleshooter

  The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

  1. Press Windows key + W on the keyboard.
  2. Type the Troubleshooting in the search bar and press Enter.
  3. In the Troubleshooting window, click show all in the left pane.
  4. Click hardware and devices.
  5. Click right on material and devices and and select run as administrator.
  6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

  If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

  Method 2:

  Note: Make sure that the Auntie Photon dongle is plugged.

  Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

  1. Press Windows key + X on the screen.
  2. Select Device Manager.
  3. Expand the network adapter and right click on driver and select Uninstall.
  4. Restart the computer.
  5. Windows will automatically load the drivers.

  Step 2:

  You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

  Windows Update: frequently asked Questions

  You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

  Please answer us on the State of the question to help you further.

• Satellite L20: Unable to connect to the internet using mobilephone & dongle BT Mecer

  Hi all

  Mine is an edition of Satellite L20.
  I recently installed XP Professional Service Pack 3. I connect to internet using my USB cable with my Sony Ericsson C702 (use the phone as a modem).

  Since there is no bluetooth built into my laptop.
  So, I bought a Mecer bluetooth dongle. I installed the bluetooth software. Can I transfer data between my laptop and my mobile phone via bluetooth.

  Now the problem is I can not connect to the internet via bluetooth. I opened my bluetooth IVT software and paired my laptop and mobile computer. Then I opened my Sony ericsson suit and looked for my mobile finds, my mobile and still once he pairs with my cell phone and when he tries to connect with my mobile phone its shows "device cannot be detected, try again." I tried to reconnect, not matching and pairing it several times, but no use.

  I also found one thing, just after it displays "Device cannot be detected," a pop-up message "SEPCSuite.exe has encountered a problem and closes the window with options."
  1) send to microsoft
  Including 2) send.

  What can we do to fix this problem?

  No idea...?

  See the website of your provider of Bluetooth software to help. This forum is for Toshiba Software only.

• My windows xp does not connect to the internet using the host card

  I recently reinstalled windows xp, the windows disk. When I plugged my homeplug (Edimax HP-2003AV), that it does not record that I have nothing plugged, it is an old computer, but still works very well, please help with this!

  Hi AaronEastman,

  ·         You get the error message?

  Follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not still in safe mode, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow the section How to configure Windows to use a Normal startup state of the link to return the computer to a Normal startupmode.

  After the clean boot used to resolve the problem, you can follow these steps to configure Windows XP to start normally.

  (a) click Start, run.

  (b) type msconfigand click OK.

  (c) the System Configuration Utility dialog box appears.

  (d) click the general tab, click Normal startup - load all services and device drivers and then click OK.

  (e) when you are prompted, click restart to restart the computer.

  Method 2: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Follow the steps in the article.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  How to reset the Protocol Internet (TCP/IP)

  http://support.Microsoft.com/kb/299357

• Unable to connect to the internet using Google or Windows Live Mail access

  I have an Acer laptop with Windows 7.  Every time I have to connect to the Internet via Google, or attempt to access my emails on Windows live mail, it takes forever to connect to the time and the high bar always notes that Windows does not.  Please notify.  This happens only in the last year, no problems prior to this.

  What type of connection Internet?

  What Antivirus utility do you use?

  This happens in other web browsers?

  If you are on a wireless connection, try switching to a wired connection and try the download.

  Click Start, type: cmd

  Right-click on cmd, and then click Run as administrator

  At the command prompt, type the following:

  ipconfig/release

  then

  ipconfig/renew

  then

  ipconfig/flushdns

  leave the command prompt

  Click Start, type: folder

  Press enter

  Delete the contents of the temp folder

  Restart the computer and try to download again.

  If the problem persists, try resetting your router if you are connected to one.

  Turn off the router, unplug it, wait 10 minutes

  Plug it in again, power up once again

  Reconnect the Ethernet cable

  Try to access these web services again.