Connection to the Web (KSOAP2) service error

Similar Questions

• Unable to connect to the web proxy/services

  Unable to connect to the web proxy/services used for officejet pro 8600 as well as using verizon fios actiontec router.  I tried wireless and ethernet.  Connectivity seems good.

  Resolved.  Port forwarding blocked by another application of verizonwebcamera problem.

• Can 'connect to the Web (proxy) service.

  Hello
  
  I use JDev 11.1.2.3.0 and the integrated WebLogic server (10.3.5.0).
  I am trying to deploy a Fusion Webapp (ADF) which needs to connect to an external Web service (so it is not in my local network).
  I use a proxy and I entered all the information in the boot parameters in my WebLogic (Tools > Preferences > Web & Proxy) and successor to the power of Attorney 'Test '.
  But when I try to log into my webservice (so when start my weblogic and deploy my application), the webservice does not even get my connection request.
  I'm I missed something? Or is it somehting wrong with the settings of my laptop?

  http://StackOverflow.com/questions/120797/how-do-i-set-the-proxy-to-be-used-by-the-JVM - try this add the implementation for your project options

• Unable to connect to the web services server

  Unable to connect to the web services server.  It is a common error that you might see if you try to enable web services.  If you receive this message, try the following steps.

  For Officejet printers

  1. open the internet browser type printer IP address.

  2 should bring you to the status of the printer page.

  3. Select the tab network at the top.

  4. left side select IPv4 under wireless.

  5. under DNS address Configuration select manual DNS server.

  6. for favorite enter 8.8.8.8

  7. for alternate enter 8.8.4.4

  8. Select apply. You can get a warning saying that this could break the connection which is very good.

  9. turn the printer off for about 30 seconds and then try to enable web services.

  For Photosmart printers

  1. Enter the printer's IP address in a browser.

  2 Select the network at the top of the page.

  3. on the left, select network.

  4. Select Network (IP) address

  5. select manual DNS server

  a. manual Preferred DNS should read 8.8.8.8

  b. alternate DNS server should read. 8.8.4.4

  6. Select apply you could get a fair warning select OK

  I hope this helps!

• problem connecting to the web services server

  I tried to download the latest updates of software/firmware for my all-in-one HP Photosmart Prem C310a.

  I can't get updates or activate Web Services because it still gives me the error message "problem connect to the web services server.

  I tried everything in the section of the Web of HPs site including connection via WPS - unsucessfully problems.

  I understand that you have found impossible to connect to the server error message on your printer. I would first disconnect the router and the printer for about 1 minute. I would plug the router first then the printer. I would then try to enable web services. If not successful, and you get the same error message. I'd follow these steps.

  1 obtain the IP address of your printer
  a. This can be done by pressing the icon on the printer wireless.
  2. Enter the printer's IP address in a browser.
  3. Select the tab network at the top of the page.
  4. on the left, select network.
  5. Select Network (IP) address
  6. select manual DNS server
  a. manual Preferred DNS should read 8.8.8.8
  b. alternate DNS server should read. 8.8.4.4
  7. Select apply you could get a fair warning select OK.

• air application connects to the web service although swf don't

  Hey there,

  I will try and be brief. We built a kiosk application in flash builder a pure as3 project. When we went to convert it into an air application all seems fine except for two issues. one is that we cannot use the Security.allowDomain("*"); Tagus. not much we comment on this possibility, but when we do we cannot connect to the web service that we use. Here is the error msg that we get:

  URL http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid = 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  ioErrorHandler: errorProductId: WebApplicationException

  ioErrorHandler: currentTarget: Error #2032: error in workflow. URL: http://api.macys.com/v2/catalog/product?prodid=559529 & prodid = 586262 & prodid = 442702 & prodid = 5 39030 & prodid = 444331 & prodid = 593389 & prodid = 102435 & prodid = 519743 & prodid = 357571 & prodid = 128285 & prodid = 407708 & prodid = 209799 & prodid = 417917 & prodid = 498705 & prodid = 131858 & prodid = 597478 & prodid = 142166 & prodid = 470687 & prodid = 584020 & prodid = 167015 & prodid = 75190 & prodid = 432111 & prodid = 481224 & prodid = 549755 & prodid =. 483429 & prodid = 414178 & prodid = 596422 & prodid = 385591 & prodid = 226280 & d = 142163 prodi

  Here is the error of charles:

  < error >

  < > 103 errorCode < / errorCode >

  types of arguments < message > Incorrect or combination < / message >

  < errorDetail > WebApplicationException() < / errorDetail >

  false < success > < / success >

  < / error >

  now, if we run just the swf file it connects very well. the only reason I need this app to be in a wrapper of the air is so that I can remove the print dialog box. otherwise, I'd create just an exe file.

  any ideas would be great!

  Thank you

  OK, found the problem!

  When we built the as3 project and we implement web service calls, we used post from get we caused problems. We have been connecting to a service of qa so that may have something to do with it. In all cases, we have changed the headers in the air application to get and it seems to work fine. Why would he works in the SWF and not the air who knows, but there are go!

  Thank you

  Jorge

• The Web Acceleration Client error (513) - internal error of the Web acceleration Client has detected an internal error that caused the connection between the accelerometer of the Web

  The Web Acceleration Client error (513) - internal error
  The Web acceleration Client has detected an internal error that caused the connection between the customer to accelerate Web and server acceleration Web to be broken. A new attempt of the web page may correct the problem.

  I get this error at all times when working in the ancestry.com Web site. I have to reload the page on almost every search I do on this Web site. It is the site of the ONLY I get this error message, can run uninterrupted for several hours on other sites and never get this message. I talked to the people at Ancestry.com support and they did 2 recommendations: turn antivirus (did not help) or switch to another web browser. I tried both 11 IE and Chrome Version 31.0.1650.63 m and I have no problem with either of these 2 browsers this error.

  Is there a problem with the way Firefox and ancestry.com communicate?

  Hello byron.lewis, many site problems can be caused by corrupted cookies or cache. To try to solve these problems, the first step is to clear cookies and cache.
  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• When running Disk Management, get the error - failed to connect to the virtual disk Service.

  When I run the Snap on the local server disk management, I get an error message in the status bar: unable to connect to the virtual disk Service.

  Thanks, I have tried these things and nothing has solved the problem.  Here's what I did:

  (a) check the VDS service was manual and failures later per second are 'take no action '.
  ANSWER: Yes to manual and following, second has not changed to "restart the service" of "non-action".
   
  (b) sfc/scannow as administrator
  ANSWER: the System File Checker has found no problem (program reported no problem and findstr/c: "[SR]" on CBS.log doesn't have the list of issues)

  (c) restore to a previous system restore point
  ANSWER: I have tried restore points several more early, each of them failed

• Error - 'Auntentication with the server failed. Family Tree Maker software does not connect on the Web dashboard.

  Original title: Family Tree Maker does not connect on the Web dashboard.

  My Family Tree Maker 2009 does not connect to the Internet comes up with the message which is cannot authenticate the server, but it tells me that my version is up-to-date.  He has always worked so far? Comes with the following message if I try to do anything that involves the net.

  "Auntentication with the server failed.

  Hi HelenTL,

  You did changes to the computer before this problem?

  If you have any software security & firewall installed, disable them temporarily and check if the problem persists.

  
  Note: check to allow them back on the computer after you complete these steps.

  Hope the helps of information.
  Please post back and we do know.

• I plugged a Linksys router for my Hewlett Packard desktop computer, it shows that it is connected with great resistance, but it won't let me connect to the web.

  I connected the router to my computer desktop Hewlett Packard, it shows that it is connected with great resistance, but it won't let me connect to the web. I also have a mid/fi through Verizon set up on this computer, but I have recently installed Magi jack more and it uses far too much data for the MiFi. What should I do to fix this?

  Hello

  ·         What is the error message or the error code that you get when you try to connect to the Internet?

  ·         What is your Linksys router connected to an Internet service provider?

  ·         Were there any changes made to your computer until the problem occurred?

  ·         What version of the Windows operating system do you use?

  Click on the link below.

  http://Windows.Microsoft.com/en-in/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  To solve the problem related to the Magic jack plu and MiFi Verizon:

  I suggest you to contact Magic jack support. See the link below.

  http://MagicJack.com/customercare.asp

  Contact Verizon support. See the link below.

  http://support.verizonwireless.com/CLC/

  Provide us additional information. So that we can help solve you the problem on your computer.

  Hope this information helps you.

• WANT to 114 does not connect to the Web server

  Have installed a 114 WANT, everything works except for the webservices - wireless eprint etc.

  I tried everything-

  1 re-install services - error cannot connect to the web server

  2. Update - error cannot connect to the web server

  3 give the static IP address

  4 restore the default settings

  I have an internet connection on all computers.  Can someone give me a hint on how to get Web services to work?

  Hi sbenzie,

  How your printer is currently connected to the network? Via Ethernet or wireless? What is your current router / network configuration? That shows your printer because it is the IP address? What happens when you try to launch applications?

  Not yet given the information above, here's what I would try.

  I suggest to reconnect the printer to the network by running the Wireless Setup Wizard and attempt to restart the web services. If this is not enough, you may change some DNS settings in printers EWS (built-in web server) to do this, put the IP address in a browser window on your PC.

  This should start the integrated Web server. In SAP, select the network on the network tab, select 'network '.

  Then select "network address" (IP). Do not change the IP configuration at the top. Go down under "DNS address configuration"and select 'Manual DNS server'. " Under manual DNS server, enter (an 8 in each box on the first line) 8.8.8.8 and 8.8.4.4 on the second line. Press the button 'Apply' at the bottom.

  Now try to connect to Web Services again.

• Unable to connect to the VMware Research Service - the SSL certificate verification failed

  Hello world

  to implement the new vCSA 5.1 but I get an error when you try to connect via browser Web Client.

  "Impossible to connect to the VMware Research Service . https://xxx.xxx.xxx.xxx:7444/lookupservice/sdk - The SSL certificate check failed. »

  I've found this KB

  http://KB.VMware.com/selfservice/search.do?cmd=displayKC & docType = kc & externalId = 2033338 & sliceId = 1 & docTypeID = DT_KB_1_1 & dialogID = 423540040 & StateID = 1% 200% 20423538503

  The manual/work around seems to be a lot of work for me and perhaps this will cause other problems in the service due to problems of certification :/

  I also think that this cannot be the solution for a whole new vCSAppliance...-_-

  I am also able to go to https://xxx.xxx.xxx.xxx:9443 / admin-app

  is it correct for the device?

  You need to regenerate the certificate for Server Appliance after change of IP/hostname.

  Visit this link: http://www.virtual-blog.com/2012/09/failed-to-connect-to-vmware-lookup-service/

  Also, the admin/management interface is https://: 5480

  Lack of credentials [root/vmware]

  HTH

• GR 11, 2 has no connection with the web

  I can connect to sqlplus and do everything and also with sql developer.
  But if I try to connect to the web interface to...
  
  https://MacBookPro:1158 / em
  
  or sqlplus with the '... @orcl ' option.
  
  It does not connect.
  
  At the command prompt, the error is:
  ORA-12154: TNS: COULD NOT RESOLVE THE SPECIFIED IDENTIFIER CONNECT
  
  In firefox, the error is:
  Firefox can't establish a connection to the server macbookpro:1158.
  
  This has happened recently, because I connect OK
  Some time ago, sometimes I had to go to the windows services Panel
  and do the activations here to work, but I do not remember
  what I did to make it work yesterday and today it no longer works.
  
  When I run the listener status, it says...
  Service "orcl" has two instances
  one is 'ready' status, the other in the State "unknown."
  and
  service 'orclXDB' has only one instance "ready".
  
  I don't know what is the oraclr_connection_data link in the file below, tnsnames
  I don't know how it appeared, or how its configuration.
  I just deleted it and then when I ran the listener
  condition only the orcl instance that is in the 'unknown' State appeared.
  Now I have the files as they appear below (with two connection strings).
  
  Someone knows something about it?
  
  I recently installed ORACLE WITH ODAC .NET DEVELOPMENT
  (Oracle Data Access Components) for use with visual studio 2010,
  who installed a new directory of client on my hard drive, but I could
  connect to the web interface after that, but I suspect it may have
  something to do.
  
  I'm using oracle 11 g 2 = windows 7
  
  Also, can someone explain to me on the lines... (see "tsnames.ora" below)
  
  PROTOCOL = IPC
  KEY = EXTPROC1521
  SID = CLRExtProc)
  (PRESENTATION = RO
  
  I understand these weird lines in my configuration
  so I can have some control over my oracle installation. I don't
  understand the existence of the oraclr_connection_data, I do not know
  If I can remove it.
  
  Thank you
  Gabriel
  
  
  = tsnames.ora =.
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )
  
  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 127.0.0.1)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )
  
  = listener.ora =.
  
  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  #(SID_NAME = CLRExtProc)
  (SID_NAME = orcl)
  
  (ORACLE_HOME = C:\app\Oracle\product\11.2.0\dbhome_1)
  #(PROGRAM = extproc)
  #(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
  )
  )
  
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  #(ADRESSE = (PROTOCOL = TCP) (HOST = 172.16.23.104)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = MacBookPro)(PORT = 1521))
  )
  )
  
  ADR_BASE_LISTENER = C:\app\Oracle

  GabyPR wrote:
  I can connect to sqlplus and do everything and also with sql developer.
  But if I try to connect to the web interface to...

  https://MacBookPro:1158 / em

  or sqlplus with the '... @orcl ' option.

  It does not connect.

  At the command prompt, the error is:
  ORA-12154: TNS: COULD NOT RESOLVE THE SPECIFIED IDENTIFIER CONNECT

  In firefox, the error is:
  Firefox can't establish a connection to the server macbookpro:1158.

  Two errors that are not related. TThe web connection uses http to connect to an agent on port 1158, and this agent is which then connects to the database. The sqlplus connection uses tcp to send a link request to the listener on (probably) port 5121.

  "It does not connect" isn't a useful error message.

  ORA-12154 means that there is no entry for the db requested in your tnsnames.ora file. Please visit http://edstevensdba.wordpress.com/2011/02/26/ora-12154tns-03505/

  This has happened recently, because I connect OK
  Some time ago, sometimes I had to go to the windows services Panel
  and do the activations here to work, but I do not remember

  
  what I did to make it work yesterday and today it no longer works.

  When I run the listener status, it says...
  Service "orcl" has two instances
  one is 'ready' status, the other in the State "unknown."
  and

  The UNKNOWN simply means that he owns a registration because you told your listener.ora file. The LOAN is due to registering with the listener instance.

  service 'orclXDB' has only one instance "ready".

  I don't know what is the oraclr_connection_data link in the file below, tnsnames
  I don't know how it appeared, or how its configuration.
  I just deleted it and then when I ran the listener
  condition only the orcl instance that is in the 'unknown' State appeared.
  Now I have the files as they appear below (with two connection strings).

  Someone knows something about it?

  I strongly suggest to start here: http://edstevensdba.wordpress.com/2011/02/09/sqlnet_overview/
  >

  I recently installed ORACLE WITH ODAC .NET DEVELOPMENT
  (Oracle Data Access Components) for use with visual studio 2010,
  who installed a new directory of client on my hard drive, but I could
  connect to the web interface after that, but I suspect it may have
  something to do.

  I'm using oracle 11 g 2 = windows 7

  Also, can someone explain to me on the lines... (see "tsnames.ora" below)

  PROTOCOL = IPC
  KEY = EXTPROC1521
  SID = CLRExtProc)
  (PRESENTATION = RO

  I understand these weird lines in my configuration
  so I can have some control over my oracle installation. I don't
  understand the existence of the oraclr_connection_data, I do not know
  If I can remove it.

  Thank you
  Gabriel

  = tsnames.ora =.
  ORACLR_CONNECTION_DATA =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  (CONNECT_DATA =
  (SID = CLRExtProc)
  (PRESENTATION = RO)
  )
  )

  ORCL =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP) (HOST = 127.0.0.1)(PORT = 1521))
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = orcl)
  )
  )

  = listener.ora =.

  SID_LIST_LISTENER =
  (SID_LIST =
  (SID_DESC =
  #(SID_NAME = CLRExtProc)
  (SID_NAME = orcl)

  (ORACLE_HOME = C:\app\Oracle\product\11.2.0\dbhome_1)
  #(PROGRAM = extproc)
  #(ENVS = "EXTPROC_DLLS=ONLY:C:\app\Oracle\product\11.2.0\dbhome_1\bin\oraclr11.dll")
  )
  )

  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  #(ADRESSE = (PROTOCOL = TCP) (HOST = 172.16.23.104)(PORT = 1521))
  (ADDRESS = (PROTOCOL = TCP) (HOST = MacBookPro)(PORT = 1521))
  )
  )

  ADR_BASE_LISTENER = C:\app\Oracle

• down loaded more recent firefox and now it does not connect to the web.

  Just did the new down load and restarting the Fire Fox cannot connect to the web.
  No problem before this new version.
  IE works fine. Chrome works very well.
  Only fire fox does not.

  You get this error message.

  See also article Firefox cannot load websites, but can other browsers .

• asked when selecting printer password to connect to the Web - 5530th

  "When I select ' printer connect to the Web ' the first thing I get is a problem with the sites security certificate message.  Then a message "i.e. explorer.exe 10.0.0.5 server is asking for your user name and password."  The server indicates that it is from admin. "What password he seeks.  My administrator password does not work.  Any ideas would be most appreciated Win8.1 64-bit, Toshiba laptop

  There are two ways we can know who is responsible for the error, restore the default settings of the printer network, or try a different web browser.

  It seems to me that the built-in Web server opens in Internet Explorer. In order to have the Embedded Web Sever open in another browser, you open Firefox, Google Chrome, etc. On the printer, press the wireless icon and it will show the IP address.

  In the other open browser, type printers I.P address in the address bar. It should load the page you had before with the tabs at the top. See if the password is always asked for.

  If the above fails, the menu on the front panel of the printer, press the wireless icon, and then default network. Connect the printer to your network and then try to load the built-in Web server (be it office or enter the I.P icon).

  Let me know the results.