Connection to the wireless network printer

Similar Questions

• 4 iPad unable to detect the C4599 already connected to the wireless network printer

  Hi all, I have a C4599 All in One Printer. I have just set up successfully with a WiFi connection to my router / modem network (infrastructure mode). There is no error message and I can print from a variety of laptops Windows (XP, Vista and 7). I loaded the HP eprint app on my Ipad 4 but it can not detect the printer. Note that the HP site says that this printer is compatible with the App ePrint.

  A second and possibly related is that I recorded with the HP eprint service website but I can't get the code or e-mail address for my printer. I can't find any way to turn it on the Web Services on the printer? (The HP site says this should be under Setup > wireless to the printer, but it is not.) There are only options to turn on/off the wireless, testing the wireless and print the wireless network and printer settings (which are all OK > PASS or information).

  Any ideas?

  Thank you

  With the update that has been done to the ePrint application, some of the old printers lost the ability to use this application to print from. The printer would not print directly from the iPad to the printer either. This is a feature called AirPrint. When you have the possibility to use AirPrint, he must place the unit on the same network as the printer, pull up a photo, press the action button on the iPad and then select print. The iPad will then give an option of the printer to print from if there is more than one printer capable of of AirPrint on the network.

  The printer cannot produce a code to register and save ePrint due to the age of the printer. Printers that have the ability of ePrint are a majority of those who have been in production in 2010 and later versions. A few Photosmarts who have the ability to use ePrint AirPrint are the 7520,6520 and the 5520. To learn more about these printers, see this link here.

• HP Officejet 4620: Office Windows 10 connects to the wireless network printer but do not print

  I have a HP Officejet 4620 all-in-one that I try to use with my desktop computer. The printer has been added to my home network, and I added the printer to my computer via the tab "Devices" Control Panel settings, but when I try to print, nothing happens. The printer icon appears in the bottom right of the task bar that says the printer has "0 documents pending. Strangely, another computer in the office at home, also running Windows 10, can connect and no problem printing to the printer. I tried to install/reinstall the drivers, reset my computer, reconnect with and without a cord USB, and none of this helps. Any ideas on how to solve the problem? My computer was running on Windows 7 until this month when I updated for Windows 10, so I don't know if it's part of the problem or not.

  Hi @leopleuridon,

  Welcome to the Forums of HP Support!

  I see that you are unable to print to your printer HP Officejet 4620. I'd be happy to help you with this. Looks like the driver is damaged.

  The software and the driver could have gotten corrupt, so we will need to remove it and reinstall.

  First of all. Please follow the steps in this guide:

  • HP printers - printer problems after upgrade to Windows 10
  • Run Windows updates, keep your computer current with updates for Windows.

  If the problem persists, follow these steps to see if you can solve the problem.
  Let's start by cleaning up your computer.

  • Cleaning disc in Windows 10.
  • Perform the clean boot in Windows 10 / 8 / 7.
  • Use the System File Checker tool to repair the missing or damaged system files. It's always a good idea to back up your data before proceeding.
  • File system check (SFC) analysis and repair system files & DISM to fix things that are not SFC.

  To properly remove the printer and drivers, follow the steps in this Post by my colleague @X-23.

  • I hope this helps. Please reply to this message with the result of your troubleshooting. I can't wait to hear strings attached good luck!

• B110A connects to the wireless network but no PC connection

  Hi Forum,

  I just bought a new HP Photosmart B110A printer range. I got set up with my Belkin wireless router. It is successfully connected. I could set up printing webservice as well. The printer is offline and I could also print a document by sending an email to the email address for the printer configuration. This means that the printer is connected to the wireless network and the internet.

  However, I can not connect to this printer from my PC connected to the same wireless netwrok. When I open the HP Solution Center, it displays the message "disconnected wireless.

  When I connect the printer via USB cable, I am able to connect to the PC and impressions as well fire.

  Can anyone help please?

  Kind regards

  Amol

  Download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&jumpid=ex_r4155/en/hho/ipg/forum/network_diag/

  What did he say?

• HP envy laptop laptop 15-ah150na: loses the connection to the wireless network device I had not only portable for 2 days

  Loses the connection to the wireless network sometimes directly after that the computer is turned on at other times after 5 min and sometimes after an hour.  No other device I have loses the connection to the wireless network.  Help, please.

  Hello @fairgame,

  Thank you for visiting the Forums from the HP Support! The forums are a great place where you can find solutions for your problems, with the help of the community!

  I understand that you have a problem with the WiFi and wanted to help you!

  First of all, try to review the next steps, offered by community member @Great-Christine-Tree:

  First of all, we have a step by step guide to guide you through the process of diagnosis here:

  HP PC - troubleshooting Internet and wireless network

  A second option is to try the following steps:
  Powercycle the network:
  1. turn off your laptop.
  2. unplug the power to your router.
  3. disconnect the power to your modem.
  4. wait at least 45 seconds.
  5 reconnect the modem and wait for it to come back online.
  6 plug in the router and wait for it to come back online.
  7. turn on your laptop and test your connection.

  Turn off the power to the adapter:
  1. open Device Manager. (Win Key + R > type devmgmt.msc > OK)
  2. expand the network adapters.
  3. right click on the Ethernet adapter / wireless, and then click Properties.
  4. click on the power management tab.
  5 remove the check mark next to allow the computer to turn off this device to save power.
  6. click on OK.
  7 test cycle.

  Reset the TCP/IP settings on your PC:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh int ip reset resetlog.txt" without the quotes and press ENTER.
  4 restart your PC and test.

  It can also help to reset the winsock catalog:
  1. go to your start screen/menu and type CMD.
  2. right-click on the command prompt icon and select run as administrator.
  3. in the window that opens type "netsh winsock reset" without the quotes, and then press ENTER.
  4 restart your PC and test.

  Reinstall the NIC drivers:
  1. download the drivers from here , but do not run them again.
  2. go to your Start menu/screen and type Device Manager.
  3. expand network adapters.
  4. right click on the wireless adapter and choose uninstall.
  5 install the drivers downloaded in step 1.
  6. restart your PC and test.

  Test an ethernet connection:
  Explicit. Test if the problem persists on a wired connection to the adapter hardware troubleshooting wireless can be directed to the appropriate areas.

  Test another connection:
  Many people excluded their home network as a problem if another device working on the same network. Networking is not as simple as that. Each device interacts differently with your router or modem and it is impossible to exclude the settings for this device until the laptop has been tested on another network.

  If these steps do not resolve the problem, try this document published by Microsoft for network management issues: wired and wireless network problems. You can change the operating system with the drop-down list in the upper right of the document.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution', this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great day!

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Impossible to connect to the wireless network when the wireless Internet is filled to connect to the Local network

  I tried to fill the connection between my laptop Wi - Fi and an ethernet cable LAN via the connection to the Local network for my xbox 360. However, when the connections passed the wireless connection would show that it is disconnected and would not reconnect. When I tried to repeat the process sometimes the same thing happens sometimes it says that it is still connected.

  However, be that as it may, both times I could not load any page of the website from my laptop and xbox connect any.
  How can I create a network bridge and get the wireless internet to connect please?

  Any help to fix this would be appreciated,
  P

  This Microsoft Knowledge Base article might help: bridge may not work with a Non-Promiscuous Mode network card .

  If not, I recommend to delete the network bridge and enable sharing of Internet connection on the wireless network connection. Boulder computer Maven
  Most Microsoft Valuable Professional

• Wireless network adapter cannot connect to the wireless network

  When I start my PC HP TouchSmart it does not recognize my wireless network.  It says wireless network adapter cannot connect to the wireless network and the details said network adapter "Local network connection * 16 ' does not work properly. The strange thing is that if I leave my computer for a few minutes, then restart it twice, it recognizes the network and starts working. Frustrating is that I have to do this everytime I turn on my computer.  It takes at least 10 minutes of starting and restarting my computer before it will recognize my wireless network.   Any help?

  Go to the website of the manufacturer of your router > make sure you have the latest Firmware in Vista for it.

  Go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > look for it last network adapters Vista drivers > download/install the.

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-adapter-problems

  Troubleshoot network adapter problems to Microsoft link above.

  Try without commitment TCP/IPv6:

  If you still have internet connection probs, one thing to try is the separation of the TCP/IPv6 (which is done by going to network connection > right click > properties > it uncheck > OK.)

  http://digitalmediaphile.WordPress.com/IPv6-how-to-unbind-from-a-NIC-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• PC cannot connect to the wireless network

  Windows Vista and office computer HP.  The use of the Airport Extreme.

  All other computers in the House can connect to the wireless network.

  The Vista machine declined the connection Wireless intermittently for the past two weeks.  Tonight, he lost it completely.  When I click on "connect to network" in the network control panel - I see the wireless network.  But when I click on connect, I get a message that Windows cannot connect to this network.

  I changed the password on the Airport Extreme and rebooted, it.  Wireless usb on Windows machine the device works correctly, by checking through the properties box.

  For example, Vista machine is recognizing the wireless network, but does not connect. Why not?

  I'm ready to throw the computer out the window!

  Hello

  Check the PoodlesAway solution to the same issue here:

  http://social.answers.Microsoft.com/forums/fi-fi/vistanetworking/thread/d4fa044e-8C41-4D8D-a4b1-82ee9ff556ac

  ======================================

  Apple Airport may be your main problem - did you check its firmware?

  Read these
  http://osxdaily.com/2009/09/01/how-i-fixed-my-dropping-wireless-airport-connection-problem-in-Snow-Leopard/

  http://reviews.CNET.com/8301-13727_7-10331876-263.html

  ======================================

  Actually try updating your driver and disabling the network logon.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
  manufacturer of system become your backup policies).

  Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
  updated drivers.

  I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
  are almost always old, and you can search drivers manually as needed.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ------------------------------------------------------

  Make sure you know the details of connection to your wireless router - SSID and password.

  You lose connection when you do and have to redo your logon.

  Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
  lower left click on merge or delete network locations - REMOVE all instances of your network (and the
  others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

  -----------------------------------------------------

  Check this box:

  Strange problem with Internet under Vista
  http://www.catonett.com/blog/archives/194

  Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
  http://support.Microsoft.com/kb/928233/en-us

  ----------------------------------------------------

  And:

  Network connection problems
  http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows 7 taking a long time to connect to the wireless network

  When I try to connect to the wireless network, it takes about a minute or two.  I didn't have this problem until I updated my card wireless about a week ago.

  Thank you very much.  I think I solved the problem.  I didn't have this problem until I updated my card with the latest wireless.  But I uninstalled the new and re-installed version, and that seemed to solve the problem.

• Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  Problem of not seeing list drop-down connection to the wireless network when checking connections network - pc windows 7.

  I just installed a Belkin modem-router - which went well. Can I connect WiFi gadgets etc. I can also connect to the internet via a network cable to my pc. I also installed a belkin usb wireless adapter and in Device Manager, says it is enabled and works.

  My problem is, I have no way of choice get a WiFi PC to display in the list (from the notification area) and cannot get the pc to give me options to create a wi - fi connection. The more I get to try to do that is "unexpected error"!

  If someone could help on this - I would be very grateful

  Good news - update of my ongoing saga with this Belkin modem/router.

  Got the pc to see wi - fi now. It turned out to be the Zone Alarm! As the router has a firewall, I uninstalled Zone Alarm completely. Also, I went into the properties of belkin usb and checked it was the most recent drivers, it does not so I installed them.

  So far so good

  Thanks for the help

  TREV Smith

• How can I disable 'O2 connection manager' to automatically connect to the wireless network?

  Original title: I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection

  I have a program installed in my computer 'O2 connection manager' it automatically connects to the wireless network, I need to disable the connection to the network.

  Hi John,

  I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

  If you do not O2 connection manager, you can disable it to connect to the Internet or you can uninstall the program and check the issue.

  You can follow the steps in the link below.

  Uninstall or change a program:
  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  I would say O2 you back for more information in the links below:

  http://www.O2.co.UK/business/support

  http://community.o2online.IE/

  I hope that the information above helps you.

• HP Deskjet 2540: My printer cannot connect to the wireless network (SSID is not found)

  Hello

  I have a HP Deskjet 2540 printer that is configured to print using the USB cable, and I have no problem printing through it. I just bought a router (D-link DWR116) and I'm trying to set up the connection to the router wireless to my printer. When I use the printer setup & software and select the option "convert a connected USB printer wireless", I can choose to enter into the setting of the printer access the router automatically or manually. These two will come with the same problem where the program is my name SSID of the router successfully but then failed to connect to what the SSID is not found.

  It comes on it comes up with the error message:

  Question: You have manually entered the name of the network (SSID) cannot be found.
  Solution: Check that your wireless router is powered. When to manually enter the name of your network (SSID), make sure you enter exactly including upper and lower case and spaces.
  ============================================================================================

  Which is meaningless because it came with the SSID earlier and I chose what options the wireless network available. I tried to manually enter the SSID, but after entering the password for the router, the same error message appears.

  Help, please.

  Thank you

  In fact, I solved the problem. Something about the wifi light on the printer. It can not be flashing, I don't know what the blue light flashes on the wofo of the printer, but I don't think that it means that the wifi is on.

• HPC8180 printer connects to the wireless network, after upgrade firmware to the router wireless

  My HPC8180 has been wireless since I bought it some time ago.  I recently had to upgrade the firmware on my router wireless of Netcom NB9W and since then my HP will not solve for the wireless network.

  I run the wizzard of wireless network on the printer, select the correct SSID and enter the WEP key according to the instructions.

  It will then not connect.

  Print the summary I have says that it passes all except:

  No filtering = Fail

  Connected = do not run

  Signal strength = very weak (which is strange because it is about 10 feet away from wireless router).

  Other networks detected matching your network name (SSID) = No.

  Summary says:

  Network Name (SSID) altnet (correct)

  Address IP = not applicable

  Configuration source = not applicable

  Communication mode = Infrastructure

  Authentication type = open system

  = 64-bit WEP encryption

  I have NOT activated the mac address filtering

  Any ideas?

  Your router appears to be a DSL modem-router.  Those who can be difficult to connect to.  In addition, WEP can be problematic and is no longer a measure of security.  WEP can be broken in 10 minutes approximately with the freeware on the internet.

  We will do three things:

  1. replace the WPA or WPA2 encryption.  You can make your own password.  Do 13 or more characters, numbers and uppercase and lowercase letters.

  2 reset the default settings on your printer network (configuration > network area).

  3. attach to the router in this way:

  Sometimes the DSL providers have more control over the router like the printer.

  -Unplug the phone line from the router
  -Cut the power to the router, wait 30 seconds, then turn on the power.
  -Go through the normal process of the printer connected to the device (wireless configuration wizard)
  -Now to find the IP address of the printer (it should be on the self-test printout), type it in a browser.
  -On this screen, you will find a tab management network, then on the left wireless, then the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you know what it is, set an IP address outside this range but not exceeding 254 (the last number of the address).
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Let the white gateway and DNS
  -Finally, connect the telephone line, restart the router and the test.