Connection with a XP wireless adapter problems

PC crashed. "" After the file is missing or corrupted Windows\system 32\config\system. Ran the recovery disc, but now cannot access Internet.Using edimax nLite wireless dongle. Removed McAfee PC protection (Firewall), removed and reloaded dongle Driver.Removed again once and downloaded the new driver. Can see good signal from the router, but is unable to accquire network address. WPA2-PSK. Another PC and this laptop OK.

Everything that I can reset or is it wireless adapter?

Hello

Maybe this can help, http://www.ezlan.net/wireless.html

Jack-MVP Windows Networking. WWW.EZLAN.NET

Tags: Windows

Similar Questions

  • No connections avalible on windows 7 with a working wireless adapter.

    That's what happened. I was in a Skype call with my friend and we had a connection error after about 30 seconds. Immediately I thought that it was my internet because my internet was very uneven, lately. After resetting my router and comeing back upstairs, I had the No. are networks avalible on my screen. Initially I thought that the proablem lied through my system services application, because that's where I set the proablem last time I had this proablem. What I did after that was I have activated the service autoconfic wwan and wlan autoconfiguration service. Has nothing. According to what I've done, I went to control panel and pass to solve my adapeter wireless even if it has been enabled and connected. Then I went in my device manager and tried to update the drivers on my adapter wireless by uninstalling it and then put it back. Then I noticed that teredo tunneling Pseudo-Interface was defective. I went to check and saw that he cound not start and had an error code 10: cound device does not start. I went to google and learned how to turn it off, and I did. After that he appeared more in the Device Manager which is ok because I thought that it would fix the internet. He did not.before all this I did a before a "critical update" windows system restore but that also did not help. I started running out of options. Please help me.

    It seems to me, of course, that your wireless network card is toast, no matter what that says Device Manager.  However...

    I didn't ask and you don't mention what you use a wireless router.  Is it possible that the router configuration has changed to the Wireless-N only, Wireless-B only, or some other setting with no Wireless-G?

    Indeed, is it possible that your wireless router has its section wireless disabled or broken?  Do you have any other wireless device that you can use to determine if the router is working OK?  If possible, test with a device near your desktop (it sounds as if your router is at some distance away).

    MalwareBytes AntiMalware (free) is not an antivirus.  It's a scanner antimalware on demand/remover that is intended to be used with an antivirus program.  See https://helpdesk.malwarebytes.org/hc/en-us/articles/201861736-Does-Malwarebytes-Anti-Malware-replace-antivirus-software-

    Similarly, for Windows 7, Windows Defender is an anti-spyware program and not an antivirus (Microsoft makes things very confusing by reusing the same names for different products).

    If these two are security programs only you, your system is vulnerable, and you must install a real antivirus program.  Free offer of Microsoft - Windows 7 - is Microsoft Security Essentials.

    For now, I suggest that you run the ESET Online Scanner (free), but I don't think that malware is the cause of your Wi - Fi connection problem.

    D - Link does not appear to be any drivers for the Rev B of your adapter for what version that went Windows XP 32-bit.  D Link says that you should connect to the Internet using your wired LAN connection and get the driver right from Windows Update.  When you uninstalled and reinstalled the adapter using Device Manager, have you checked the box to delete the driver software?  If this is not the case, do it and then try to reinstall.  You need to be connected by an Ethernet cable in order to re - download the driver from Windows Update.  See http://www.dlink.com/uk/en/support/faq/adapters/usb-adapters/how-do-i-install-my-wireless-adapter-correctly-in-windows

    I doubt that D-Link updated its Wireless Configuration Utility for Windows 7, but if that was the case and that you use it, disable or uninstall (check Control Panel > programs and features).

    Other than the above, I'm sorry but I'm out of ideas.

  • Cannot connect to Virgin Media Home Hub with Atheros AR5007EG wireless adapter

    My brothers computer has problems to our Virgin Media Home Hub wireless conecting. I contacted Virgin Media Services customer and they say that the driver is the worng version. The computer has a driver adapter G series and we need a driver to adapter N series. What is the difference between the two, and where I could get the adapter driver series N of for the Atheros AR5007EG Wireless Adapter?

    I hope someone can help

    Hi Williams,

    Thanks for posting to the community by contacting Microsoft.

    The drivers are developed by the hardware manufacturer. I suggest you to contact the manufacturer for more information about the driver and support:

    https://support.Atheros.com/

    Let us know if it helps.

  • 1030 N wireless adapter problems

    Intel r centrino wireless N 1030 r is experienceing or related material of the problems driver.  Unable to connect to wifi.

    No problem with other computers on the same router. Have no problem with Ethernet on this computer

    I use a HP Clubhouse dm4-3050 us Entertainment Notebook PC. and using windows7, processor i5.

    Would be very grateful for any suggestions / recommendations.

    Try the Intel driver update site: https://downloadcenter.intel.com/download/24345/Intel-Driver-Update-Utility

    If this does not work, I literally take the message and assume the N1030 wireless is a failure.

    Solution: Buy a N 300 USB wireless device.  Costs about $20.  They work almost always better than one that is integrated, and they are portable.

    Plug your new wireless USB device and let Windows install its own drivers, disable the built in N1030 one.

    Control Panel, network and Internet, network sharing Center, change the adapter settings

    Right-click on the N1030 and choose disable.

  • HP 350 1: laptop wireless adapter problem

    I have problems about to connect to a wifi network. Sometimes my laptop does not show available wireless networks, even if I'm sitting next to the wifi router.

    If I try to connect to the wifi, when an available network, the brand wireless on windows bar notification area spots turns into a red cross mark and say cant connect to available networks list netwok.the will also emply.and shortly after, once again it shows there's available networks.

    This happens again and again.

    If I run 2 or 3 times convenience store network, sometimes it connect to the network.

    So now, I have to perform network troubleshooting whenever I connect to a wifi network.

    If I turnd on wifi on shutdown of laptop, it takes a long time (about two minutes) to start windows.

    If the wifi turned off when stopped, computer laptop startup kill 30 seckonds.

    I tried driver re install, driver updates.but it does not work.

    Please give me a sollution.

    model-hp 350g 1

    wireless adapter-Ralink Wi - Fi adapter 802.11bgn RT3290

    driver version - 5.0.46.0

    Windows 8.1 company

    I think that you have tried them all... new driver, uninstall and reinstall... what else can it be? Maybe delete and physically to reinsert the card wireless, but if you do you could also stir this thing and put in a real wifi for $5 card.

  • Connection with the Apple ID server problem

    iCloud on my ASUS ZENBOOK can not connect.  It always returns a connection error message: there is A PROBLEM CONNECTING WITH THE APPLE ID SERVER.

    My laptop is an ASUS model UX303L (64-bit) running Windows 10 Home, Version 1511.

    Key points:

    (1) I have connected to my very well through several iPhones iCloud account, multiple iPads, an iMac and another ZBOX PC running the same version of Windows 10.  (Confirms that it is not a problem of "User" with me trying to use the wrong password).

    (2) from my laptop problem, I can connect to the internet fine iCloud - Chrome and Firefox version by.

    (3) I have the latest version of iTunes on the laptop, which starts very well and logs in my iTunes store (.. .in the Australia).  [This is interesting, because I guess that both iTunes and iCloud connect to the same server Apple ID to check the details].

    (4) I made sure that Windows is completely up to date, and that my office 2013 is also entirely up-to-date, with a full stop/restart of the laptop to make sure that nothing is installed in half.

    (5) I uninstalled iCloudand reinstalled from a new download.  Did not help.

    (6) before the iCloud upgrade to the latest version there is + 2 weeks (I'm now on the 5.2.1.69 Version), iCloud worked perfectly, including the good synchronization of Outlook calendar and favorite contacts on different browsers.  I want to try and reinstall the old version - see if that restores me to my nirvana earlier, but I couldn't find anyway to do.

    Suggestions as to best 'next steps', I can take would be highly appreciated...

    I have exactly the same problem... is there any help for us?

    So far, I've been forced to use Windows 7

  • Satellite A500-1GL - card wireless adapter problem

    Hi all

    I had a problem with the card wireless on my laptop for months and have no idea how solve more.

    Basically, the wireless card seems to go through phases does not turn on. One day I can boot up my laptop and it works fine, then the next day it won't work. The wireless button on the front of the laptop is turned on but don't turn on the red light.

    In the past, I've managed to get over this by several reboots the laptop (until he decides to work) or reinstall flash, wireless etc. drivers card drivers. However, none of these things today seem to be making a difference.

    The worst, it's that there is no continuity with when it does not work and how it is fixed (sometimes reboot once fixes it, other times reinstall drivers fix it and so on).

    For this reason, I assumed that this may mean that there is some sort of hardware failure? But if I run the laptop in safe mode, the wireless still works without any problem.

    Someone has an idea what is happening?

    Any help would be appreciated,

    Liam

    Hello

    First of all I would like to know what system you are using and if you have tried to recover the laptop to factory settings in the past.

    The point is that these issues are mostly related software and could be solved by resetting the system.

    However, I think you know that the wireless network card can be turned on and off using the FN + F8 key combination.
    Have you tried this combination in the past?

    Second, you must check the WLan card status in Device Manager.
    The point is that problems of card driver WLan, Wlan card doesn't would be not listed correctly in Device Manager. So this should be the next step.

    Where the Wlan card is listed correctly, I assume that the driver is installed and working properly.

  • Network with DSL and wireless setup problem

    I use two number of script and lan proxy... NW its Internet connects only via script... no more connection with lan numbaer, I checked dsl. the amount of the fine... Help, please... also

    Give me some advice on, dsl, wireless configuraion in switches

    Kind regards

    Mohammed

    Used Google...

    http://www.Google.com/#hl=en&&SA=X&EI=gbX-TJTwBsWclgfevL29CA&SQI=2&ved=0CBMQvwUoAQ&q=DSL+, + wireless + configuration + in + switches & spell = 1 & fp = e18ec2db23988f7d

    --
    Gina Whipp
    2010 Microsoft MVP (access)

    Please post all responses on the forum where everyone can enjoy.

  • Share an internet connection with a card wireless at & t

    I have a simple network or 2 XP computers.  One of the computers has internet acess thru wireless from AT & T 3G card.  I would like to activate two computers, access to the internet through this card.  Many examples exist for the use of a DSL line or cable modem.  Y at - it a trick to make it work with a lisk wireless card it?

    Sharing a wireless card should work as a modem cable or DSL line sharing. Open the network connections folder (Start > Search > ncpa.cpl ), right click on the wireless connection and go to the sharing tab Boulder computer Maven
    Most Microsoft Valuable Professional

  • Connectivity with printer Epson wireless problems.

    Epson printer indicates that the wi - fi connection is excellent. The connection to devices also indicates that the signal strength is excellent. However, when I go to print it tells me that there is no wireless printer! This happens with the iMac, iPad and iPhone. This just started happening about 2 weeks ago.

    See if it works... In system preferences > printers and Scanners choose your printer and remove it from the list, and then add it back

    Get help to solve the problems of printer on your Mac - Apple Support

    https://www.Epson.com/cgi-bin/store/support/supDetail.jsp?useCookie=Yes & infoType = FAQ & oid = 209708 & prodoid = 63095161 & foid = 230405

  • I want to connect to multiple wifi networks, but with a unique wireless adapter?

    After much research on the internet I found a Virtual Wifi software that makes virtual adapters wireless with a single physical card. I download and installed this software but I don't know how to use it. There is no desktop icon or anything to change in my laptop.

    Can you please tell me some solution.

    I suggest you contact the software manufacturer for instructions on how to put up with your system.

    It should not be necessary buy additional routers.

    Eddieb

  • HP color laserjet cm2320nf mfp (ff3be2) can be networked with the USB wireless adapter?

    Howdy, first post here - rules of noob.  Search for as well as I could but have not seen this answered.  Recently, we changed the place of our home network router.  We cannot reach our hp color laserjet cm2320nf mfp (ff3be2) Ethernet cable not more.  You ask if we give a wireless (Wifi, no bluetooth) to USB adapter to the USB port of the printer, will be the printer network through it?  Sure it works on computers, but don't know if the printer will look network via the USB port.  In any case, the problem we are trying to solve becomes the printer on our network of origin when we can not connect it via Ethernet.  Thanks in advance.

    Thanks for the reply.  Yes, I thought that I understood that after doing some more than browse the Internet.  Just ordered the Ethernet of IOGEAR Universal for adapter Wi - Fi N.  Hoping that the printer will think it is plugged.  Should do based on what I've read.  Thank you, James.

  • T60 wireless adapter problem

    Hello world!

    I reinstalled windows on my T60 and had no problems with my Intel PRO Wireless 3945ABG adapter.

    After one day it stopped working. The little green light on, even if a press fn + F5.

    I tried to reinstall the driver, and it did not help. I tried to find any problem in its settings, but I couldn't. I ran out of ideas.

    Can you help me, please? Anyone who has ever met this problem or similar?

    Thank you!

    Oh, God! I'm so embarrassed!
    After all these tests and installation, uninstallation, resettlement and do the same thing again and again, I discovered that there is a switch for her. Sorry everyone, I have no excuse. Oh, I could have: I bought just 5 days ago.
    I thought Maliha was fn + F5, I didn't know that there was a real switch.

    I apologize once again!

    Thank you very much for your help!

  • Loss of connectivity with HP C7280 wireless

    I have a HP C7280 I connect wireless to several computers running Windows 7 Edition Home Premium.  All 3 computers, I often lose the connection to the HP printer and "remove hardware" and then "add printer" to return connectivity.  This does not happen with my printer Brother laser on the same home network.  Is there a solution to maintain the connection to the HP printer?

    Thanks in advance for any help.

    I am sorry to say that this is probably due to Win 7 64 bit.

    There are few things we can do to improve the situation, but eventually it can't be fixed:

    1. don't use WEP.  It is not secure and can be broken in about 10 minutes with the freeware.  In addition, it can cause problems of connectivity to printers.  Use WPA or WPA2 with a strong character 13 + password that you create.

    2. we will set a static IP address for the printer:

    -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
    -Enter the IP address in a browser to reveal the internal settings of the printer.
    -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
    -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). Yours is 192.168.1.100 to 192.168.1.149.  We will use 192.168.1.200
    -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
    -Let the gateway and DNS white. Click 'apply '.

    Now, stop the router and printer, start the router, wait, and then start printing.

    After that, you will have to redo 'Add printer' using the new IP address.

  • Intermittent connection with Cricket EC1705 Broadband modem problems.

    HARD TO STAY CONNECTED A WIDE CRICKET BROADBAND MODEM EC1705

    Hello

    1. What Windows OS version are you using?
    2. Were there any changes made to your computer before this problem?
    3. The internet disconnects frequently?
    4. What web browser do you use?
    5. You get an error?

    Try the methods and the resolution of problems in the following article.

    Windows wireless and wired network connection problems

    http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

    Also reference: http://windows.microsoft.com/en-us/Windows7/Why-is-my-Internet-connection-so-slow

    I hope this helps.

Maybe you are looking for