Connection with the WRT610n problems

I can't get a wireless connection at all with my new router-WRT610 and my wired connection keeps Goin ' in and out... Any suggestions?

I called and they understood. Comcast don't suport dual band wireless and so he got all blocked up. I have

Tags: Linksys Routers

Similar Questions

  • is "is there a connection with the server problem", in El Capitan

    Hi guys,.

    I've tried to sort myself but up to now no joy... :-(

    I'm under El Capitan on a MacBook and for weeks I need to install a specific program through CDROM connected with my old Mac Mini (Tiger) via my WiFi use it as a hard drive external.

    Everything worked fine, but then I get this annoying message "there was a problem connecting to the server...". »

    So far on:

    1. the service of Mac Mini is not listed in the connection points

    2. the Mac mini is no longer connected to my network

    It seems that this message has something to do with my iCloud service, I tried to unplug and deletion and fixed but as soon as I have reactivated iCloud began to burst once again.

    Any suggestion?

    Thank you

    Sebastiano

    Have you tried to remove the software that you have installed as instructed by the developer?

  • connection with the printer problem

    Since the evolution of the router, I can not connect with my Epson printer

    Hello

    1 Windows operating system is installed on your computer?

    2. What is the full and exact error message?

    3. what happens when you try to connect to the printer?

    4. What is the brand and model of the printer?

    Method 1:

    I suggest you mention the link and check if it helps.

    Problems printing and printing errors

    http://support.Microsoft.com/mats/printing_problems/en-us

    Also check out the link for the drivers and support of Epson:

    http://www.Epson.com/cgi-bin/store/support/SupportIndex.jsp

  • Connection with the Apple ID server problem

    iCloud on my ASUS ZENBOOK can not connect.  It always returns a connection error message: there is A PROBLEM CONNECTING WITH THE APPLE ID SERVER.

    My laptop is an ASUS model UX303L (64-bit) running Windows 10 Home, Version 1511.

    Key points:

    (1) I have connected to my very well through several iPhones iCloud account, multiple iPads, an iMac and another ZBOX PC running the same version of Windows 10.  (Confirms that it is not a problem of "User" with me trying to use the wrong password).

    (2) from my laptop problem, I can connect to the internet fine iCloud - Chrome and Firefox version by.

    (3) I have the latest version of iTunes on the laptop, which starts very well and logs in my iTunes store (.. .in the Australia).  [This is interesting, because I guess that both iTunes and iCloud connect to the same server Apple ID to check the details].

    (4) I made sure that Windows is completely up to date, and that my office 2013 is also entirely up-to-date, with a full stop/restart of the laptop to make sure that nothing is installed in half.

    (5) I uninstalled iCloudand reinstalled from a new download.  Did not help.

    (6) before the iCloud upgrade to the latest version there is + 2 weeks (I'm now on the 5.2.1.69 Version), iCloud worked perfectly, including the good synchronization of Outlook calendar and favorite contacts on different browsers.  I want to try and reinstall the old version - see if that restores me to my nirvana earlier, but I couldn't find anyway to do.

    Suggestions as to best 'next steps', I can take would be highly appreciated...

    I have exactly the same problem... is there any help for us?

    So far, I've been forced to use Windows 7

  • Failed to save the system or create the image of the system, error: the problem occurred while trying to connect with the VSS writers (0 x 80042318).

    Original title: cannot backup Windows 7 system.

    When I try to back up the system or create the image of the system I get the following message, the error was detected in the Volumn Service VSS (Shadow Copy) the problem occurred while trying to connect with the VSS writers.  Verify that the event system Service and the VSS service are running and look for errors related to event logs. (0 x 80042318).

    Hi bernardolahoustino,

    Please keep us informed. Please let us know the State of the question, so that we can help you further.

  • Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Can not connect with the Adobe server to upgrade the PS. Tried with fiervall and the router and called my provider. She is also only CC there are problems!

    Check your hosts file.

    help for that and other adobe.com sure common connection problems read, http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html

  • I can't create a new site of catalyst for business with Dreamweaver CC 2014. The error message states that Dreamweaver cannot connect with the server, try again later. How can I solve this problem?

    I can't create a new site of Business Catalyst with Dreamweaver CC 2014 (Mac). The error message states that Dreamweaver cannot connect with the server, try again later. In addition, I am also unable to load remote site Business Catalyst created previously as it says that there is something wrong with my user name or password. However when I put my password and press to test the connection, he said that it has connected successfully. What is wrong and how can I solve this problem?

    Thank you

    Thanks for the reply, however it seems to work again after I removed some unused Dreamweaver sites in the section "manage sites" in Dreamweaver.  It may have been a conflict of name or something.

    Concerning

    Adrian

  • Very slow connection on the WRT610N

    I bought a brand new WRT610N recently but didn't experience any improvement in speed, therefore began to study a little.

    I have a broadband cable, 30 Mbps connection.

    Cable modem is connected to a network adapter.

    An another output-power adapter is connected to the WRT610N

    now, when I connect my laptop through the router (wired or wireless makes no difference), my (upc speedtest) speed is about 5 Mbps.

    When I connect to the internet via cable to uplink on the router, I have 12 Mbps.

    When I connect directly to the cable modem, I have 28 Mbps.

    So, a big loss is caused by food taken thingies, I can get more quickly those who or stop using them at all. But what causes the loss of the router? All I can do about it? It shouldn't give me easily the 12 Mbit/s, it becomes itself?

    Any help appreciated.

    If connect you your computer to the WRT610N, you should be able to get on the same 28 Mbps you get from your cable modem.  Since you get only 5 to 12 Mbps wired, this suggests that there is probably a problem of basic configuration.

    (1) have updated the firmware on the router?  If so, after the update of the firmware, you reset the default router, and then configure the router again from scratch?  If you do not reset the router by default since the last update of the firmware, then please do it now and see if it solves your problem.  If you have saved a file of configuration of the router, DO NOT use it - you must configure the router again from scratch.  See "Reset to Factory Defaults" below.

    (2) using peer-to-peer (P2P) software?  If so, it is a known cause of slowdowns of router and disconnections.  The problem can occur even if you are not currently running the P2P software.  Stop using the P2P software.  It may take up to 5 days for your router erase from his memory.

    If the above does not solve your router, then proceed as follows:

    (3) Please indicate your ISP

    (4) Please indicate the make and exact model of your modem (not the WRT610N) number.

    (5) Please do the following test:

    Put your entire network.  Using an ethernet cable, connect your modem directly to your computer.  (Do not use the WRT610N for this test).  Turn on the modem and the computer.  Make sure you have an active Internet connection, then go ahead with what follows: (even if your Internet connection does not work, include this and move forward.)

    Go to 'Start' > all programs > Accessories > command prompt.
    A black DOS window will appear. Type "ipconfig/all" (with no quotes), and press the Enter key.   Copy all results in your next post.  To make the copy, highlight the results, and then use the keys copy (Ctrl-c) and paste (Ctrl-v) keys.  If your "IP address" does not begin with 192.168, then for security reasons, delete the latter half of your IP address.

    Reset to factory settings *.

    To reset your router by default, follow these steps:

    (1) turn off all computers, the router and the modem and disconnect from the wall.
    (2) disconnect all the wires of the router.
    (3) turn on the router and let it start up completely (1-2 minutes).
    (4) press in and hold the reset for 30 seconds button, then release it, then let the router reset and restart (2-3 minutes).
    (5) turn the router.
    (6) connect a computer cable to port 1 of the router (NOT to the internet port).
    (7) turn on the router and let it start up completely (1-2 minutes).
    (8) the power of the computer (if the computer has a wireless card, make sure it's off).
    (9) try ping on the router. To do this, click the 'Start' button > all programs > Accessories > command prompt. A black DOS window will appear. Enter the following text: "ping 192.168.1.1" (without the quotes) and press the Enter key. You will see 3 or 4 lines that begin with ' response to... ". "or"Request timed out". If you see "reply from...". ", your computer has found your router.
    (10) open your browser and point it to 192.168.1.1. This will take you to the login page of your router. Leave the user name blank and in the password field, enter "admin" (without the quotes). This will take you to your router configuration page. Note the version number of your firmware (usually found near upper right corner of the screen). Exit your browser.

    If you get this day without problem, try the Setup disk (or configure the router manually, if you prefer) and see if you can get your work and router configuration.

    If you can not ' response to... ". "in step 9 above, your router is probably dead. A report with this problem

    If you get a response in step 9, but cannot complete step 10, is that your router is dead or the firmware is damaged. Related to this issue.

    If you need additional help, please give the results of steps 9 and 10. In addition, if you receive error messages, copy them exactly, and report.

    Please let me know how things turn out for you.

  • Thunderbird does not connect with the server

    Another recent problem is Thunderbird does not connect with the server. I don't know if sent mail will go out, but I know I'm nothing receive. My internet connection works well for FF or another browser. I checked my settings and they seem OK. I checked the default settings in Win10x64 and they are correct. Any ideas?

    Although windows 10 is new for us all. How do solve you. I have other solution with very similar issues.

  • Does not connect with the e-mail server after update.

    Thunderbird ran an auto update yesterday. Then it just stopped working. It does not connect with the Comcast email server. An error message appears "Unable to connect" and "the connection was refused when attempting to contact live.mozilla.messaging.com. I don't want to uninstall and reinstall for fear of losing my emails and address book. How can we get Thunderbird set, there is no tool in the toolbar to enable the debugging and correction of program errors.

    I use Thunderbird version 38.1.0.

    Thank you.

    The problem solved itself, Thunderbird has just started working. I followed the thread suggested by Christ1 and found none of it applied. No malware, no browser, no certificate error security block. I did, however, in Thunderbird, under Tools/Options/General uncheck the button for "When Thunderbird launches, show the Start Page in the message box." I do know that if this helped, Thunderbird still do not access Comcast mail for hours after that, even with several stops and restarts.

    Until the next problem...

  • Hai, my ipod shuffle when it is connected with the computer, it flashes organge light.  If I don't take no light

    Hai, my ipod shuffle when it is connected with the computer, it flashes orange light.  If I remove without light and music.  Even I kept connected all day with my laptop for charging.  But without success.  Is it possible to change the battery?

    If the shuffle still appears in iTunes when you connect, you can try to do a restore using iTunes, where the cause is a software problem.

    Use iTunes on your Mac or PC to restore your iPhone, iPad or iPod settings - Apple Support

    If the problem reoccurs after the restoration, it's probably a battery worn.  Need soldering skills to replace yourself, and iPod shuffle (with the exception of the 1st generation) is very small.  Not easy to work on.  This web site has repair guides

    https://www.iFixit.com/device/iPod_Shuffle

    and parts are available from sources like eBay.

    Apple 'serve' the shuffle, if it's the 4th gen (current type).  Rather than change the battery of your device, you get a replacement unit.  According to this document, out-of-warranty fees are $39

    Pricing of the Service - The Apple iPod Support

    NOTE: If your shuffle is less than one year of the date of purchase, it is under warranty.

    The retail price of a brand new 4th gen iPod shuffle, with new headphones, docking cable and warranty of one year is $ 49.

  • Satellite C660 WIFI does not connect with the channel 1 of the router

    Hello

    I have this problem for several months. I connect my laptop with the D - link DIR-615 as a WAP browser.

    I can't remember, but the fact is that I can't connect more with channel 1 of my WAP.
    Connection with the other channels is no problem.

    Other laptops or the available have no problem connecting to channel 1.
    He's tried a recovery, remove and reinstall the driver for my WIFI.

    All know what to watch?

    Kind regards

    Jacky Deschepper

    Where have you changed channels settings: within the router or the wireless network adapter?
    Is that it s any laptop you are using. It s always a matter of the WLan card that is integrated.

    Usually, you can change the Wlan card settings in the properties.
    Go to Device Manager-> Wlan card-> right click Properties-> Advanced tab
    Here, you would be able to change the available settings.

  • Skype cannot connect with the latest version?

    Hello there guys. I got the error "Skype cannot connect" with the latest version? I tried to reinstall Skype, so that delete my Skype folder in %AppData%, it did not work, I have to do? I tried to log in with your new account, still no luck? How can I sign in Skype... ?

    So I just fixed my problem by installing win 8.1 Pro 64 bit hehe Thx for the help anywayz.

  • Re: Portege Z30: Fingerprint software does not, the connection with the sensor fails

    Hello to you all,.

    I have a great fun for you guys. If you're curious, it's here...

    I just bougt garage a portege Toshiba Portege Z30t-A-126 PT24CE-01400HFR
    Nice machine but SSD is too small, so I changed the original SSD 256 to a 512.

    Reinstalled Win7 completely without any pb.

    Just a pb in fact: the footprint software does not work.
    When I hliant, it fails and says "unable to connect with the sensor.

    In french "fingerprint recognition."
    Unable connect the sensor.

    But when I check the Device Manager computor it says that everything is in place and ongoing execution, validity (WBF) (PID = 0010) sensors works very well and the latest version of the driver is installed.
    (I downloaded the form driver toshiba Web site.) The name of the driver is fp - sw - 20140115084521.zip)

    Then? What's not?

    I spent hours searching the web and tried everything I could. Reinstalled a thousand times the drivers, software, tried other drivers... But there is no way that I can fix it.
    It's really annoying...

    Can someone help me please? Have you an idea? I'm stuck...

    Thanks in advance. :-)

    Hello

    This issue of the fingerprint has been described in another thread.
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=81261

    You should be able to solve the problem installing the chipset driver.
    Another user said, an installation of Proset Ethernet drivers/software was necessary to get the problem resolved. But to be honest that I put t think that missing Proset utility would cause the question

    However, check it out.

    Your comments would be appreciated

  • Satellite M30X-129 loses connectivity with the external USB device

    I have a problem with my laptop that has regularly been do worse and I can handle is no longer!

    Whenever I work with external devices via USB ports (all kinds of devices but my external hard drive Smartdisk CrossFire and my iPod in particular), after a certain period of time (sometimes minutes, sometimes hours) the laptop loses connectivity with the device.

    If happens to be listening to the music, download photos from a camera or laptop computer for the ' net or sync of the iPod, the connection is cut off, turning off the device and I have to start all over again!

    I'm almost at the point of launch of the laptop by the window, so any help is most welcome.
    Thank you
    Abderrahman

    Hello

    This happens also with the external USB mouse?
    This occurs if the power adapter is plugged or only if the laptop running on battery?

    In-hubs properties > Device Manager USB root-> power management
    You will find the option called allow the computer to turn off this device to save power.

    I would recommend the brand and disable this option.

    Maybe it helps.

    By the way; When do you update the operating system? I think that it s there long time, perhaps some system files or registry entries are corrupted or a 3rd party application affect the USB functionality?

Maybe you are looking for