Connectivity to the Satellite M30X USB problem
Hello everyone,
I have a problem with the USB to the Satellite M30X connectivity. I purchased a M30X and had problems with connecting devices of differnet in one of the USB ports.
I tried to solve his problem and but nothing resolved.
Goodbye, Meier
Hello
Rudi is right. There is a new update of the BIOS and it should solve the problem of USB.
Tags: Toshiba
Similar Questions
-
EPC2203 modem cannot connect to the Mac via USB?
I searched all threads and you can't find something to solve my problem.
My ISP sold me the modem Scientific Atlanta EPC2203 cable recently. I can't connect it to my Mac (10.5.7) via ethernet no problem at all. But I can't get a connection via a USB port. The modem operating manual mentions for Mac OS X USB connectivity, but does mention all the details on how to establish the connection: we talk about the installation of PC drivers. Supplied with the modem installation CD only applies to the PC, it seems that I have to take extra steps such as installing a Mac driver? I couldn't find the Mac drivers adapted on internet, then I start to think that this modem is not simply done to connect to the Mac via USB?
Any help is very appreciated.
To make your Modem work with USB connectivity, you must install the Modem drivers on your computer. You can try to search for the Drivers that works on the MAC computer or else you can contact the support Tech Atlanta, because they can let you know where you can find the drivers for your Modem. Or well you googled around and you can find the drivers for your Modem which are Compitable MAC.
-
How to redefine the keyboard of the Satellite M30X?
Can someone help me to redefine the keyboard of the Satellite M30X?
Unfortunately my mother tongue (i.e. Polish) widely uses the right Alt to produce some unique signs. There are many schools, but I prefer to use thumb to press. Unlike other laptops that I used this key on my current Toshiba is far right, making it impossible to strike by the thumb. There is an empty key right next to the space bar. In my setup, it is equivalent to--------, and I want to make another right Alt.
Thanks in advance
Witold
Hello
As much as I know there is no possibility to redefine the keys on the keyboard. The only thing that allows you to redefine is the keyboard input language. This option, you can find in Control Panel under regional and language options.
Good bye
-
A few questions on the upgrade of the Satellite M30x 154
Hi all
I plan on upgrading my Satellite M30x-154.
I was wondering if you guys would like to know before upgrading if the things I want to buy this would work.I would change my Hitachi 60 GB for a Seagate 100 g (link following) would this work?
http://www.ebuyer.com/product/131274I have BIOS version 1.90.
I intend to install Vista on it. I'll be able to use an OEM copy?
I currently have 1 GB custom memory Idleness I plan on implementing to 2 GB inside
It still works fine?See you soon
Robert KnightHello
1 upgrade HDD. I think it will work because some models of satellite M30X was also built with 100 GB directly from Toshiba.
2 OEM Vista will not work because the OEM of Vista version needs a special BIOS for activation (BIOS for VISTA). You can install it but needs activation after a few days.
3. the satellite M30X is 2 GB max memory, which means that it is possible to install strips of memory 2 x 1 GB... but I can't say if Crosiar memory will work but normally they work. The original partnumbers memory for a 1 GB module is 1024Mo PC2100/PC2700 (PA3313U-1M1G)
I hope this will help you.
CU
-
How to generate a call via mobile phone connected to the pc by usb
Hello
Comment on the call of the UN peut-on generate via mobile phone (nokia6680) connects to the pc by usb from labview?
I have installed "nokia PC suite". is possible perhaps-this one starting from the palette "Connectivity/library and executable" start this app and automatically generate a call to a predefined number? It sounds complicated and ca me don't think so that it works...
Apparently these are the commands that allow a cell phone from a PC of Girardon. Y ' there way to use a hyperterminal type program pay to try their hand and then be able to use the VISA features in labview? Pour the moment, I don't see how start. Ports of HyperTerminal manages the communication with RS232 type but comment Girardon the USB Installer takes it a soft pour mobile phone USB connection behaves as a virtual RS232 port?
I have seen comment importer a dll in labwindows on another project but we must have the description of the dll, the functions name pay to use. In this case, I have all this.
Thanks if qq can help me car the, I'm blocking (I saw that there were messages on this topic but ca don't allowed me to establish a communication with the phone outside the nokia PC suite software).
My but is send an alert by such pour a data acquisition application that runs on a computer laptop not connect a network of the United Nations.
JF
Finally, it runs. When the telephone connection after installing nokia pc suite and a usb cable, the phone appears like adding a virtual COM and another element: "Nokia 6680 usb modem cable. Select the line corresponding to the additional virtual COM port, in my case, it appears as "COM17. Configuration is easy: choose transmission speed (bps 9800 or else up to 115200bps, apparently the phone can detect the selected speed of the rate), 8 data only bits, no parity, no flow control. Then you can send orders to:
Xxxxxxxxx ATD. followed by the return to call a wagon phone (the phone number is xxxxxxxxx), at the end of the command is required to call (if there is a detected error 'NO CARRIER')
to send an SMS, send:
AT + CMFG = 1
AT + CMGS = "xxxxxxxxx".
then tape the message to send, followed by Ctrl-Z (ASCII code: 0x1A)
If you are interested in this subject, I advice allows you to start the test with hyperterminal or another program to easily implement a serial communication, and then implement in Labview. I guess the AT commands are a little bit different with other phones like Nokia.
Note: to send Ctrl-Z with Labview, right click on the array of strings in the scheme of hexadecimal code, then select Add 1A and re - click to print the normal code...
-
Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?
ampawase wrote:
Help on unit Photos and videos not Visible when connected to the PC via USB. I also tried to restart and reinsert the SD card but no response what happens each time I take pictures and try to transfer to the pc via USB please help to recover the photos suggest something?"A wireless connection with the mixture, use the file manager, hold Media Card - Photos - 'Shift' or ' Ctrl ' key - select thumbnails - right-click - Save slot - selecting a folder on the pc and save them.
-
How to register for an event when the device is connected to the PC in USB mode or sync
I develop application on blackberry with phonegap.
I want to hear event when the BlackBerry device is connected to the PC by USB MODE or sync.
I saw mediagallery and applications Filemanager showing the dialogue that the application cannot be used when connected to the PC in USB mode.
I want to display dialog similar to my request.
Can anyone please help on how to do it.I saw blackberry webworks API
public static Boolean blackberry.system.isMassStorageActive)
who says if massstorage is active or not.
But I can't keep on request this API every time. I'm looking for an API that gives me the reminder.
Can you please help.
On the side of Java, this can be done by implementing a FileSystemListener and the rootChanged method:
public void rootChanged(final int state, String rootName) { if (rootName.equalsIgnoreCase("sdcard/")) { if (state == FileSystemListener.ROOT_ADDED) { /* SD Card is available. */ } else if (state == FileSystemListener.ROOT_REMOVED) { /* SD Card is not available. */ } } }
I was not able to find a corresponding WebWorks API or API community well, so I think you need to create your own custom extension to implement this feature of the listener.
https://developer.BlackBerry.com/HTML5/documentation/using_javascript_extensions_1866976_11.html -
My cloud of Adobe installer is unable to connect to the animated. No problems with internet... Help, please
Hello
Thank you for using https://helpx.adobe.com/x-productkb/policy-pricing/activation-network-issues.html > and all the steps in "troubleshooting connectivity issues.
If necessary, and for any other question, click on through http://helpx.adobe.com/contact.html and so "open" Please use the chat, I to can I part had the best experiences. An employee of Adobe Preran I quote: the chat button is enabled as soon as there is an available to help agent.
Hans-Günter
-
Problems on the Satellite M30X 124
Hello
I have a Satellite M30X-124. He stopped the electric network load when the laptop is turned on. The battery seems to be OK and witnesses to support lights online when I play with the charge lead to the back of the computer. I tried another charger and it is certainly not the charger or the charging cable. The problem seems to be at the back of the laptop when the mainstream point of entry is.
I referred to this problem in the decision-making authorized Toshiba service and they believe the problem is the motherboard and I would like to replace it (they have not seen or inspect the laptop). The only problem is that the replacement of the motherboard is like buying a new laptop for high cost. Any ideas?
I believe that the problem must be that he connection between the charge lead and the entrance to the main power supply does not work and there may be something loose that can be fixed. I'd rather do something myself rather than spend a lot of money.Any ideas please.
Thanks for your help
AnwarHello
I wouldn recommend you do it by yourself, but could try. I heard that this phenomenon comes from a loose AC plug that must be welded to the card.
Here´s a site that should help you in your mission: http://www.irisvista.com/tech/If in doubt then I suggest you buy a new machine, rather than spending money for your old beautiful Clipboard. ;)
Welcome them
-
Windows vista on the Satellite A100-036 problems
Hello. I have a Toshiba satellite A100-036 laptop with windows vista home basic 32-bit, and I have the following problems.
1. they replace me the hard drive in a store. I don't have the Toshiba dvd recovery I used to format the windows. They told me that I can't use it more because the recovery of the disk partition is lost. If I want to format again what should I do?
2. whenever I turn on the laptop touchpad scrolling does not work. I go to control panel > mouse and it shows me this message: "unable to connect to the score. synaptics device driver. If you have installed another pointing PS/2 device driver please uninstall the synaptics driver by clicking on the Yes button. You must then reinstall your device pointing to your external device driver again. You want to uninstall the synaptics driver now? "I click on no and once it works again and the synaptics pointing device icon reappear in the taskbar. If I restart the laptop, it still does not work and I do the same things.
3. whenever I turn on the laptop the bluetooth does not work and the bluetooth icon does not appear in the taskbar. I have to go to Device Manager, uninstall the driver, go to control panel > bluetooth local com and it works again. Whenever I turn on the laptop I have to do this.
4. everytime I turn on the laptop the Security Center is turned off and I put in market or the automatic updates are disabled and I have to turn them on.
5. sometimes it does not install the automatic updates and it shows me Error 8000FFFF.
Could someone help me? Thank you.> 1. they replaced the hard drive in a store. I don't have the Toshiba dvd recovery I used to format the windows. They told me that I can't use it because the recovery of the disk partition is lost. If I want to format again what should I do?
If you have the Toshiba recovery disc in the past, you can use it as part of the new HARD drive. The Toshiba Recovery disk would fix the laptop back to factory settings, which means that you have installed Windows system, Toshiba drivers and additional software.> 2. The touchpad scrolling does not work everytime I turn on the laptop. I go to control panel > mouse and it shows me this message: "unable to connect to the score. synaptics device driver. If you have installed another pointing PS/2 device driver please uninstall the synaptics driver by clicking on the Yes button. You must then reinstall your device pointing to your external device driver again. You want to uninstall the synaptics driver now? »
> I click on no and once it works again and the synaptics pointing device icon reappear in the taskbar. If I restart the laptop, it still does not work and I do the same things.
Go to the page of the Toshiba UE driver and download the driver for the Synaptics touchpad. Install the touchpad driver and reboot the laptop. Usually, this should solve your problem.> 3. Whenever I turn on the laptop the bluetooth does not work and the bluetooth icon does not appear in the taskbar. I have to go to Device Manager, uninstall the driver, go to control panel > bluetooth local com and it works again. Whenever I turn on the laptop I have to do this.
It's strange. Usually the BT should work if the BT stack has been installed correctly. Please note that you must activate the BT using the fn (FN + F8). This combination turns on and the WiFi also. So make sure you did it correctly.
> 4. Whenever I turn on the laptop the Security Center is turned off and I have to turn it on or automatic updates are disabled and I have to turn them on.
Please check this: [turn auto update or disable | http://windows.microsoft.com/en-us/windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=windows-vista]
> 5. A few times it does not install the automatic updates and it shows me Error 8000FFFF.
[0x80000FFFF error code when you download updates on a Windows Vista-based computer: http://support.microsoft.com/kb/946414/] -
Power on the Satellite Pro 3000 problem
Wives Satellite S3000 has developed what appears to be a power problem
Last night it started indicating that he doesn't have the power of the DC input... This seemed to be a fault of internittent stirring casued DC input light to return cable. Taking the DC Jack off main cable, I discovered that one of the two pins was broken.
Is out today and bought a new 5.5mm/2.5mm DC Jack and reconnected thinking that everything would be OK... but there is no response from the laptop... the DC input light does not come on and neither does the indicator "charging battery".
A multimeter indicates there is 19v DC decision-making.
It seems to me that there may be an internal power problem. Otherwise there may be a problem with the power with respect to the current delivery.
A battery totally buggered may this "non-response"? I expect the laptop to operate on DC power regardless of the internal State and secondary battery.
Ideas appreciated... will see if I can alternative power source and try it before resorting to delve into the bowels of the thing!
Thank you
Hello
> A battery totally buggered may this "non-response"? I expect the laptop to operate on DC power regardless of the internal State and secondary battery.
The laptop should run without battery. If the adapter is ok and if it was connected to the laptop, then it should be possible to start the machine.
If the laptop does not start, then it must be a hardware problem.
But believe me; It's not easy to say what exactly is the problem.Maybe you bought only a bad power adapter that is not compatible with the Sat Pro 3000?
Or maybe there is something wrong with the electronic power supply on the motherboard?
Who knows? :| Only the technician who checked the laptop can provide an exact error diagnostic. -
Satellite M30X starting problems
Hello!
My Satellite M30X doesn't start normally more. When I press the power button, it turns on, the fan starts, but nothing happens. Or sometimes it takes almost 5 minutes before then the Toshiba logo appears, it begins in place.
After that, I sometimes get a message that the Smart HD feature has detected a failure in my HD. But not all the time.
I have Linux and Win XP on my hard drive. When I use Win XP, it starts normally, then after a few minutes, I get the BOD with message IRQL_NOT_LESS_OR_EQUAL. Or sometimes, the system just hangs. If I boot mode safe, everyting works fine.
On Linux, the system freezes after 30 minutes of use.
I'm tempted to think that I just need to reformat my HD (I have a 100gig HD of Fujitsu), and everything will be fine. I have to try again. And also once again, on Win XP Safe Mode, everything works very well - I can't even use WLAN, and I am writing this same post! But if it's just a software or an OS problem, why not not my laptop start normally? I mean, why is that sometimes it does not start at all (the Toshiba logo does not appear), and I have to turn off my phone and turn it back on so that it works. Sometimes it is not boot at all, no matter how many times I try it turn on and off. The power on light comes on, fan will start, then fan turns off, light is always turned on and nothing happens. Or it could be caused by a faulty hard drive? Is that why it sometimes does not start at all? But if it is the HD, why is there not a problem in Mode safe?
It is so weird coz it wasn't a problem before, and he appeared out of the blue.
Any help will be appreciated! Thank you in advance!
Hello
To me, this looks like a hardware problem. I think it works in safe mode because other such graphics card device drivers are not loaded.
As I know the IRQL error also occurs if the blue screen of death appears on the screen. I think that it us something wrong with the graphics card or the memory modules.
I think you should ask the AEP from Toshiba for help. -
Image stretched on Samsung 16:9LCD connected to the Satellite M100 TV
Hello
I'm fighting for work reasons why my 40 "lcd will only show a stretched image when I connect my Satellite M100 via the vga output. Two weeks ago, I watched movies in the proper resolution and proportions to use your TV as extended desktop. Now, for some reason the image is a stretched 16:10. All drivers are up-to-date and work.
I even updated the firmware on the tv. This problem started when I got the M100 a out of the box state using the recovery cd.
Any help would be greatly appreciated. Thank you. Ross.
I tried changing the settings as much as I could find with no luck. Connect the s-video cable gives me the same problem.
If I watch TV in 4:3 mode, the image looks good.
Samsung is a bunch of useless w ##kers and continue to give me answers auto.Any help or advice would be great.
-
BIOS reset to the Satellite M30X
Hello
I own a Satellite M30X and its start not more after soldering a new D/C. It turns on and the fan starts to operate. But the screen remains black and after 2 seconds, the fan stops and everything is frozen (can not turn off by pressing the power button). I hope that I can't solve the problem by resetting the BIOS by the hardware.
Is it possible to do?
> after soldering a new take D/c
And who did this work? You or your provider? -
TCP/IP VISA RESOURCE (connection to the LAN) vs USB?
I wonder if I should increase the number of USB ports, I have on my workstation or add a USB hub, or TCP/IP Lan connections can be as fast as USB connections? The first time, it seems that when you use the local network connected insturment that the answer is much slower when it is USB connected, but my workstation has sufficient TCP/IP and not enough connections USB ports.
Thank you
Kellen
Personally, I have no trust USB. I had too many problems with it. Cables randomly edge. Cables move around and that is why it is 'new '. In a dedicated test rack that just sits there, it's probably fine. But you should definitely use a good powered external hub.
But I prefer to go on the road to LAN, especially if you have LXI compliant instruments. There is just something about the connection to your device via a web browser to make sure it's working properly. And all you need is a good Ethernet hub and you can connect to a ton of instruments. If you're not going this way, have the instruments on their own small network with fixed IP addresses. It will make your life much easier. If you need the computer on a corporate network, it is fine. Just make sure you have 2 Ethernet ports.
Yes, USB has a lower latency. When the flow of data, LAN can play catch-up (at least with Gigabit). There are advantages and disadvantages to both options.
Maybe you are looking for
-
Don't tell me that I don't know how to ask a question. I don't really have. My question is, is there someone or something out there that can make me my music on my new computer? I had everything buy once in the past. I'm not inclined to do it aga
-
Groups Yahoo emails do not show the name of the sender
When you receive emails from my Yahoo Group address "' displays only the name of the group without the sender's name. This just started happening in the last days.
-
I can't see the time of full custody on missed call...
When I have a missed call I can't call time. Only a part of it is on the screen. It will show "December 4, 10:" I can't see if it is am or pm. I need the timestamp to my work. Any Suggestions? This is also true when I view the history of calls for th
-
Satellite P300 - keyboard going crazy
Hello! I have a Satellite P300, and my motherboard broke out weeks.I picked it back this morning, but since the repair, I have a little problem: The keyboard has a numeric keypad, separate, which can turn with the NumLock key.When the num lock is act
-
Hello im eddie I just want to know if its good to leave your pc up-to-date all the time before u closed the windows updates? because a lot of people told me it is not good for my pc. theres many things u do not need or things that enterupt your pc is