Connectivity USB not detected at all on 1132 MFP

Hello, I'm trying to understand this... the 1132 MFP turns on and works as a copier but it is not at all detected

via a USB connection. Plug and unplug the USB cable do not produce any reaction from the PC either.

I have replaced several USB cables, change of the USB ports on my computer nothing happens.

Everyone is in a similar situation?

I think the USB module is turned on the printer, but any feedback is much appreciated!

Thank you

Hi bleduri,

I can't wait to hear that you have questions.  What is the exact model of the (M1132 MFP Laserjet, Deskjet) printer?  Given that the PC does not respond when you insert the USB it is possible that the PC port or printer is defective, but it is also possible the problem is with conflicts of USB or software related issues.  Please follow the steps in the following link to isolate if hardware is defective, other or software device conflicts are listed as being the issue. Click here

I hope this helps!

Tags: HP Printers

Similar Questions

  • USB not detected at all

    Hello world

    New to the use of VMWARE, but I'm doing a project. Since I use a 64-bit operating system and I need a 32-bit I use virtual machine to run windows XP.

    I have read many topics and continuously see people saying ' go to vm > settings ", and I'm completely confused to where it is. I have looked through my computer for him and do not understand what people point also.

    My camera is the MSP430 and it is detected on my windows 7 64 bit, but it fails to connect to my xp. Previously, he has worked perfectly well, but suddenly, he refuses to work. On my tab devices, one who is stuck, I have that sounds and cd disk to network. Previously, he showed my key USB and my MSP430.

    If anyone can give me direct instructions to solve this problem, it would be great.

    Thanks in advance!

    Edit the vmx file and set the values to 'true '.

    and while you're busy - also fix your browser - it does not display file extensions properly

  • Before left SS USB not detected & gt; Model: 20-a220l & gt; Series of PC all-in-one HP Pavillion 20

    Dear concerned

    My PC: Model: 20-a220l > HP Pavillion all-in - one PC series 20,.

    Operating system: WIndows 7

    AV - SS USB not detected by any modem or USB key left right back side - USB 2.0 work.

    Rgds/Khalili

    Hello:

    You can have a TI USB controller.  See if this driver USB3 works...

    http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=CP-104401-1&cc=us&DLC=en&LC=en&OS=4063&product=5192630&sw_lang=

    If this driver does not work either, please complete the following steps so I can know what model USB3 controller motherboard in your PC is using.

    Go to Device Manager, find the other devices category, then click on the USB controller needing drivers.

    Then click on the Details tab in the upper part of the window USB controller.

    Now, you see a drop-down list of property and it is set by default to the Description of the unit.

    Drop down on it and select the second item in the list (Hardware ID).

    After the first string of characters you see in the window.

  • I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

    I keep getting the "this connection is not approved" in all the sites when I use Firefox on windows laptop 36.0.1 8. How can I overcome this.

    Hi vijaysampath, please make sure first that the date, time, and time zone are set correctly on your system. If this does not solve the problem (or it is already set correctly), a possible solution depends on different factors:

    • What is the error code indicated under Technical Details on the error page?

    in case the error code is equal to sec_error_unknown_issuer, please try to add an exception on the bottom of the error page to verify the certificate, as shown on the attached screenshot:

    • What information about the issuer of the certificate contain?

    Please take these two pieces of information. Thank you!

  • Intermittent problem "USB not detected" Genius Traveler Laser 315 mouse.

    Original title: the USB mouse not detected

    -------------------------------------------------------------------------------------------------------------------------------------------------

    My problem is this: I have a Genius Traveler Laser 315 mouse which I brought last summer and it worked perfectly on my laptop. Recently I bought a new laptop, on which the mouse no longer works.
    The problem is very awqward, because the behavior of the mouse on the new laptop is completely random: repeatedly he actually worked perfectly when it is plugged-, but most of the time (e.g. After restart of the operating system or unplug the mouse and in him plugging back) it didn't. This behavior is even more strange, because on my old laptop and several others, the mouse still works perfectly.
    My opinion is that the problem is with USB drivers or a mouse, but when I tryied another mouse and disk external DRIVE on the new computer laptop, they both worked very well. I even copied oriented drivers on my old laptop to the new usb, hoping that I could solve the problem in this way, but the result was the same (on two laptops, the OS is Windows 7).
    Another possibility is that one of the sons of the mouse cable was broken, but I passed that, too, because I've tried twisting the rope as much as I could while he worked on the new laptop and it has always worked well.
    The USB on the new laptop computer Sockets all work (I tried all).

    I know that the simple solution is to buy another mouse, but rather what's wrong with it (or my new laptop) to spend the money to replace a mouse I know it's functional, because I feel that this money would be lost, I have no guarantee that the new mouse work (if I wanted to buy a new (, I'd still go for a genius) and, for that matter, I would be really happy if I could solve this annoying problem.

    If you have an idea where is or where could be the problem, or how could determine to hit or where I could get more help, I would be grateful for any comments.

    More details that might be useful:

    -on all laptops I tried the mouse of the operating system is Windows 7 Ultimate (and my old BONES and my new laptop was installed on the same CD)
    -the old laptop (on which the mouse works) is an Acer Aspire 5630
    -the new laptop is a Dell Inspiron N5010

    -------------------------------------------------------------------------------------------------------------------------------------------------

    OK, sorry, this is the mail that I sent to the support of the engineering team. But it provides a good background.

    I tried all the 'classic' fastening means (I'm not really sure, but I think that I also reinstalled windows AFTER seeing the problem)

    Any ideas? Thank you!

    EDIT: I mean REALLY not detected, not even as an unrecognized device by the "undetected".

    I have tried them all. The only strange thing that happened was when I opened the mouse: strangely, he started working beautiful (I disconnected and reconnected it several times and it has continued to work). Of course, the miracle did not last, but at least now I'm sure that there is a problem with the sons of the mouse - I think that one of them might be slightly broken somewhere inside the mouse, or immediately after the release of the cord there. Now, the question is why is my new laptop the only one who refuses to detect the mouse.

    The new most plausible problem is far beyond the scope of this forum, I'm going to look elsewhere, but I thank you again for your time and patience!

  • Key USB not detected by the computer.

    Original title: Cnmemorysoftware

    If I put in my Spaceloop by CnMemory; I don't find them in my PC computer.
    So I can't work between the hard drive and the stick.

    Hey Manfred,

    Thanks for the reply and my apologies for the previous post helped you.

    1. did you try in another computer and see if the problem still occurs?

    2 have you tried another USB port?

    3. other USB devices connect properly?

    Please follow the methods to solve the problems of connectivity USB in the computer:

    Method 1:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/

    Method 2: Uninstall the USB drivers:

    1. Click the S tart button
    2. Select Control panel
    3. Open Device Manager
    4. Expand USB controllers
    5. Right-click on each USB drivers and select uninstall
    6. Restart the computer

    Reference article

    Install a USB device

    http://Windows.Microsoft.com/en-us/Windows7/install-a-USB-device

    Please post back with the result. If the problem is still not resolved, we will be happy to help you further.

  • Keyboard USB not detected

    My old PS2 Keyboard was fine, but whatever I do my computer does not detect my new Microsoft USB keyboard at startup. I get the error message "keyboard error or no keyboard present".

    I currently have two keyboards on the go, one to start the computer and the other to type with. It's stupid.

    Any help would be welcome, even if I don't know I missed the obvious solution.

    Alan

    -If I understand correctly - your problem is that, until Windows starts, your USB keyboard is not detected?  After that it starts - it is, and it allows you to type?

    If the answer is Yes - your problem may be a simple BIOS setting (nothing to do with Windows) or a lack of support for USB devices at startup.  Can't tell without knowing more about the computer (brand/model of the system as a whole or the motherboard - depends on whether it is a third level machine (Dell, IBM, HP, etc.) or a system of fragmentary, put in place by you or a friend/etc.)

    --
    Martin Stanley
    --

  • Not detected at all IDE drives

    OK, because of my most recent thread, I was forced to pull a 3.5 "IDE HDD in my office in an enclosure for backup. The backup went perfectly, no damage detected in all. Then, I pulled the IDE cable in the Office for the CD player because he got in the way of the installation of the HD. I pulled by plastic, not the Ribbon. He slipped effortlessly, and the installation of what I had done several times previously worked perfectly. Until I started, that is. The computer has done is the automatic test sequence, but I noticed that the CD players and HARD disk are missing from the list of installed devices. I have no other devices, so I went into the BIOS to be sure. Synthesis system said, all IDE drives were "not installed". All cables are firmly in place, has not changed in the BIOS except the boot sequence. I need to install Windows on this HARD drive, I can not do because the CD player is also out. Help, please!

    Wow I feel stupid. Ribbon IDE frayed.

  • speakers are connected but not detected! Help, please!

    I tried to plug in my sound souround in my lap. Well the wires accidentally touched something and then there is a loud noise, of course, we were surprised & so after numerous attempts, trying to have his surround for the computer, we couldn't hear anything so I gave up & just connect the speakers to the computer again in the tower. Well we couldn't hear anything now! I tried to watch a movie and NOT of HIS! We tried pluggin helmet & still nothing! & now even if the speakers are plugged and his saying that the speakers are not detected even if their plugged in! But if I check the sound I can see that the lines for the volume are moving up and down, but we can't hear anything! so I called a computer tech and he said that sometimes the sound is changed well I changed the sound and he was trying to detect the speakers, but it is still saying that nothing is plugged into the Speaker Jack when they are! Computer Savy not so much need help please! Blow something?

    Hello

    The steps in the article would solve that problem.

    No sound in Windows
    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Also, try to use the same system on another computer sound and check if it works well.

    Let us know the status of the issue.

  • Internet connection are not detected

    Hi, I switch from win xp to 7. After the installation of acrobat 8 made, I had the problem during the activation. Can't activate error msg "INTERNET CONNECTION NOT DETECTED". Please help solve. Thank you.

    If you use the 32-bit version, you can be in the best chance. It seems like a lot to win 8 is similar to Win 7 (I know it's probably debatable) and several people reported to work on Win 7. If you haven't tried with the record as an administrator and by disabling antivirus during installation, you may be successful. However, you have apparently installed. There may be some changes to the operation of the internet on 8 to win and who will be, but this isn't something I'm good. If you are not in a hurry and stop regularly, maybe some people will be accompanied by suggestions.

    AA7 and before, the main problem with Win 7 was the failure of AcroTray. I hope some people will be here soon.

  • A Wi - Fi connection does not detect the Satellite L40-139

    Hello!

    I have a problem with the WiFi connection on Toshiba L40-139 Windows XP Professional
    I have all the drivers for this model of the site.

    Also Intel PRO/Wireless 2915ABG: 9.0.4.39 adapter has been installed.
    But during the installation there was an error "could not install the driver.

    If it detects a Wi - fi card by Device Manager
    When I try to connect to the Wi - Fi network, I got a message that it's not all Wi - Fi devices on my laptop.

    Help, please!

    Hello

    As I m wrong not the L40-139 PSL40E does support Atheros 802.11 wireless network card g.
    And that's why you should use and install the Atheros Wlan card driver!

    In addition, you must perform a BIOS update.
    According to some feedback here in the forum, the BIOS update to solve some problems of WLan.

    Check it out & good luck

    Good bye

  • Equium material P200-1ED wireless not detected at all...

    Hello

    You have a problem with my parents computer laptop and I cannot for the life of understand me.

    The wireless on the laptop disappeared completely. It was working fine last night and since then to turn it on this morning, it didn't work. The are no wireless connection in the Connections window and in the Device Manager, nothing is found. Windows is not saying there is a material must be installed and I can't find the drivers to uninstall.

    I tried to install the latest drivers and still nothing was found. Few at the front of the laptop to turn on the wireless or disable control IT. By pressing fn and F8 (the wireless function key) does nothing no more.

    , Someone has any idea how to solve this problem? Any help will be greatly appreciated.

    Thank you very much.

    Hello

    If WLAN adapter is not listed in Device Manager, it means malfunction wlan. The best way to check whether it is hardware or software/driver associated is to restore the settings from the factory with a recovery disk. If she did not always appear, you must contact the service center for repair or buy the usb wifi dongle.

  • Cisco connect does not detect not not previously configure router?

    I tried to reinstall cisco connect on a new computer because my old is broken. I downloaded the software from cisco connect to my router model. In the manual it says that he would invite me that my router has already been put in place. However, I did not receive a command prompt, and he continued to try to set up the router again. I cancelled all upward and I don't know what to do. Should I go and set up again? Are there risks in addition to losing the settings and passwords?

    Thank you! -In exodus

    Hi InExodus,

    What is the model number of your router? He invites you the router is already set up, it asks you a username and password? Coz if it ask you this question. You can simply enter the key ssid and the security of the router, and you should be able to continue with the set up. But it will help if you post the exact error message or error code...

    Thank you

  • Connected USB not accessible when file system

    Hello

    We are developing an application for BB 4.6 and we meet a strange error when the BB is connected to the desktop via USB software.

    Our application downloads files from the internet and stores it in the "file:///store/home/user/app_dir/". We check if this directory is already created with:

    file = (FileConnection) Connector.open (localPath, Connector.READ_WRITE);

    If (! file.exists ())

    create dir and the rest of the code...

    When USB is connected, we always get a "IOException: file system error (1003)" on the line "Connector.open.

    Forums for research, we found that this error may be related to the SD card, but the dir refers to the memory of BB, so we do not understand why we are getting the error.

    We noticed that when the USB is connected, the function 'Explorer' in the multimedia menu option shows a message asking the user to disconnect the USB cable to see the files.

    Is this a normal behavior when the USB is connected? If this is the case, is there a standard way to alert the user about this situation?

    Many thanks in advance,

    Kike

    1 only one source can access a system of files at once.  If the microSD card or local storage is used by your PC (via USB), it will be accessible from the smart phone BlackBerry itself.

    You can check this by trying to navigate in this area of the application of media on the BlackBerry smartphone.

  • Satellite L500-247 - mouse USB not detected

    Hello

    I have a Satellite L500-247, Windows 7. Long ago, I tried to use a USB mouse and it worked (plug-and-play) without problem. Yesterday, I tried to do the same thing and I tried 3 USB mouse, but no one works with me. I don't even get the window that says new hardware found. I plug in the USB mouse and nothing happens. I tried to put them into the other USB port, but also the same problem.

    I can plug in the USB and the laptop can detect it smoothly but with the USB mouse, the story is different. I don't know why :(

    I think that there is a problem in the USB voltage or sth like that!

    Can someone help me!

    Hi laith12,

    Probably there s something wrong with USB drivers or something, but I doubt s it s a hardware problem USB ports because USB key will be detected

    Did you install additional software or the USB mouse driver? In some cases they could make problems with USB devices so I n t install the mouse software and a USB keyboard.

    What you can do is to remove the USB ports on the Device Manager and restart your computer. Try also updating the driver from the official website of Toshiba chipset.

Maybe you are looking for

  • 41 of Firefox crashes, FIrefox was crashing at startup from the 40.0.3 updated

    Crash ID: bp-fceb36ed-dad2-4eab-9836-687df2150928 HelloAfter update to Firefox 40.0.3 several weeks back, Firefox would crash at startup. I uninstalled Firefox, reinstalled FIrefox (now with version 41), this is updated to Windows (Vista 64-bit), sho

  • module no longer works

    For a while now, I use an add on / extension temporarily blocking sites on the blacklist of procrastination loading combat immediately. But recently it has stopped working. I tried to restart firefox and disabling and then re-enabling the add-on, but

  • I have Firefox 7.0.1 and want to move forward and back more than one page at a time-how to fix this?

    I used to have 6 of Firefox that allow me to advance or go back more than one page

  • Crashed hard drive file recovery

    Hello I am pulling data from a hard drive crash (Windows XP works badly to the point that MS support could not fix).  I had a pretty basic install, Office, iTunes, some other applications. Other than Outlook PST files, are there other data file impor

  • Containment of the AP

    Need for Clarification The function of containment AP can't on 4.2 CUWN be automated so that it includes APs of thugs who are advertising your SSID or is it a manual process. The new engine of mobility Cisco IDS/IPS system service that automatically?