Connector MagSafe 2 (the part that plugs into the computer) is getting very hot.

Hello! I have a MacBook Air (Early 2015) and when I load it, the plug that plugs into the laptop is very hot (I can barely touch). This only happens when I use the computer while I am it loads. When MacBook is in mode 'sleep' the plug only heat. Is this normal or something in my MacBook is broken?

Hello...

Make sure it is well ventilated > use and maintenance your Apple MagSafe adapter - Apple Support

Tags: Notebooks

Similar Questions

  • IPhone 6 s - Phone was black screen after loading the next day and then the botton House had very hot as it burns! Cannot open my Iphone more.

    Hello. I tried to load my 6s IPhone last night and then when I woke up, the screen went black and I can not activate more. After some time, the home button gets very hot to a point that I can't touch him more. I tried to go online to find a solution and apparently, tons of users / owners have the same problem! Surprise, nothing to do a large part of this topic in the community online own Apple. This problem of search in google and it is like a burning question online just like the home button.

    Why?

    You can see this topic on another thread.

    Re: My iPhone 6 sec Home button is really hot and the unit does not light

    Didn't that happen since last year, and hundreds have already posted.

  • My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way?

    My old iphone 6s is completely broken, it does not or registry that it is connected when plugged into a computer. I'm able to recover photos from the SIM card with an adapter USB SIM card or through any other way? I also do not save anything with AllAccess, icloud, or through my computer as you would with a digital camera.

    The photos are not stored on the sims, sorry.

    You can always try the Recovery Mode, little to lose at this point. If it doesn't, I suggest taking it to an Apple Store for testing.

    Recovery mode:

    Turn off your iOS device.

    Plug charge cable to the computer only (not to the device yet).

    Open iTunes on your computer.

    Hold the button to power on your device and do not let go.

    Plug the cable into the device while keeping the power button.

    Wait for the computer to detect the device and wait that he eat.

    Restore as New first, then restore sauvegardΘ if you wish.

    https://support.Apple.com/en-us/HT201263

  • As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." How should I do?

    Original title: Rundll error help

    As that I start my computer I get the error message "Rundll: error loading C:\windows\idoroyuyevev.dll the specified module could not be found." -What it means and how to fix it?

    It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.
    I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.
    These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.
    Here are the detailed instructions that protect you and solve your problem in the 'right' way.
    There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
    A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
    It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
    Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
    So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

    You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

    If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
    If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
    Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
    . There is no cancellation or exit without saving the option in regedit.
    Here is a link to a popular registry backup tool:
    You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
    Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
    When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
    The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
    Scroll through the list and look for a boot entry associated files in the error message.
    If you can't find on the connection tab, look in any tab.
    You can also click file, search to search for logon, or any tab for all or part of the name of the element.
    Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
    Given that your system has or has had an infection, follow up with this:
    Perform scans for malware, and then fix any problems:
    Download, install, update and do a full scan with these free malware detection programs at:
    Malwarebytes (MMFA): http://malwarebytes.org/
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
    They can be uninstalled later if you wish.
    Restart your computer and solve the outstanding issues.
  • My iphone does not appear as a device in itunes when plugged into my computer, how can I solve this

    My iphone does not appear as a device in itunes when plugged into my computer, how can I solve this pls help

    https://support.Apple.com/en-us/HT204095

  • whenever I re - start the computer I get this error: could not load the file nta0104.dll.

    "original title: NTA0104.dll.

    whenever I re - start the computer I get this error: could not load the file nta0104.dll. How can I fix?

    HM

    Hello

    Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If the error persists after scanning use this program to out startup

    This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  • Satellite A300D - fan turns very hard and the laptop gets very hot

    I was wondering if someone could point me in the right direction as what to do with the overheating problem that I currently have with my A300D. I had the laptop for less than a year, it is still under warranty but I don't know where to go or what to do to fix it.

    The problem: about two months ago, I noticed the fan turns very hard and also the laptop gets very hot. Now it runs so hot the laptop shuts down completely. The heat being driven out of the laptop is so hot! burn your my infact.

    Anyone has any advice they could offer me.

    Thank you
    James

    Hi James

    You wrote that you have the laptop less than a year, so my question is this is already cleaned it?
    The laptop needs to be cleaned every 3-4 months and I do this every 3 months. Whenever I do I m wondering how much dust out and after this procedure the portable is a lot cooler.

    Here's an interesting article from Toshiba on this subject:
    http://APS2.toshiba-tro.de/KB0/HTD7A01ZZ000AR01.htm

    Compressed air spray is really useful and you should check it out yourself! ;)

  • My MBP 2012 gets very hot on the bottom on occasion.   He also seems to be slow at times especially at the beginning of the session.  I ran a check and here's what I got back 11/4HDD/40000000 SATA (0,0).  Any help on what's going on?

    My MBP 2012 gets very hot on the bottom on occasion.   He also seems to be slow at times especially at the beginning of the session.  I ran a check and here's what I got back 11/4HDD/40000000 SATA (0,0).  Any help on what's going on?

    a quick search brings us to recent threads = the essential so that "SSD or related connection.

    https://www.Google.com/search?q=4HDD%2F11%2F40000000+SATA+%280%2C0%29+site%3Aapple.com& ie = utf - 8 & oe = utf - 8 #q = 4HDD/11/40000...

    Mac Laptops: Apple Hardware Test may report alert 'HDD' - Apple Support

    ...

    ... If the message in addition to the other problems related to the drive to solid state (SSD) or Flash storage disk, go to an Apple Retail Store or contact Apple's Service Providerwith the computer.

    ...

  • After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed.

    After you start the computer, I get the error msg: "ProfileCnt.Exe has encountered a problem should be closed" can someone help me?

    Hello

    Some research suggests that ProfileCnt.exe belongs to a wireless card or

    Ethernet card.

    Work using the boot minimum troubleshooting to identify the troublesome program,

    then uninstall/reinstall this program.

    331769-how to perform a procedure to clean boot (XP & Vista)
    http://support.Microsoft.com/kb/331796

    Alternatively, looking for C:\Program Files for the file ProfileCnt.exe can tell you

    What program is involved.

    Don

  • my computer acer aspire v5 installed windows 10 of its own accor is about 2 weeks. Today the taskbar has disappeared from the bottom of the computer, I get message error system-2018375670

    my computer acer aspire v5 installed windows 10 of its own accor is about 2 weeks. up-to-date as the taskbar has disappeared from the bottom of the computer, I get the message error 2018375670 system, which can do it, I can't access anything on the computer

    Hello

    Here is the Vista Forums, you send messages to.

    Vista doesn't do not part of the update free Windows 10, so 10 would not settle.

    The free update is for 7, 8/8.1 and 10.

    See you soon.

  • When I turn on the computer, I get this message - COM + Event System has stopped working. How can I activate this return?

    I had virus protection total defence installed. This occurred immediately after.

    Hello

    Thanks for your answer to my question. I was about to start step 2, by performing a boot minimum when a message pops up informing that 2 programs were slowing down my computer and also to stop because they were also running. Ironically, these programs I've ever used has appeared on my computer advertising protection against viruses and to speed up the computer.

    I did not purchase the license if it comes to start up all the 3 or 4 days telling me that my computer is slow.

    I uninstalled both programs, which I won't mention for obvious reasons and the event system Com + message did not return after the computer has restarted 3 times. Apparently, the problem has been resolved, but I will continue to have oversight. If the problem returns I'll restart and inform you about the results.  Thanks again for your expertise. guavaridgemb

    Thanks for posting your question in the Microsoft Community.

    I understand that when you turn on the computer, you get an error message indicating that COM + has event system stopped working. Correct me if I'm wrong.

    I imagine the inconvenience that you are experiencing. I will certainly help the question of fixing.

    Please follow the steps and check the question below:

    Step 1:

    Check the event viewer for the logs of error from the links below.

    Open Event Viewer:

    http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer

    What are the information in event logs? (Event Viewer):

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

     

     

    Step 2:

     

    You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

    To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

     

     

    How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8:
    http://support.Microsoft.com/kb/929135

    Note: You must follow step 3 of the article mentioned above to recover your computer to a Normal startup after you complete all the steps.

     

    Step 3:

     

    Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

    http://www.microsoftsafetyscanner.com/

     

    Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

     

     

    Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly.

     

  • the screen is often very hot.

    My computer Vista Deskstop, the screen gets very hot and hurts College the screen due to the hot flashing my body.

    If your screen becomes so hot that it makes you feel uncomfortable, then you almost certainly have some sort of serious hardware problem. That level of overheating can be a fire hazard, so I strongly recommend that you unplug the power supply of the PC screen / and get them looked at by a professional repairer.

  • Whenever I use the computer, I get the message "install new updates"

    The most recent 2 Win7 security upgrades/downgrades are on my computer. I checked.

    Whenever I use the computer, I get the message "install new updates"

    How to set the flag that says I have miserable things?

    Thank you

    Trevor

    Original title: upgrades

    Hello Tworg,

    Thank you for the update on the question and sorry for a delayed response.

    If your Windows Update history shows that .NET Framework 4.5.1 is installed successfully. If troubleshooting says ' registration for the service is missing or corrupt... not fixed "then you can try the methods provided below and see if help."

    Method 1

    I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article.

    How to reset the Windows Update components?

    http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways

    Method 2

    If after performing more high question method persists try to follow the steps described in the following Microsoft article methods.

    Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

    http://support.Microsoft.com/kb/2509997

    Registry warning : This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    You can use the following link to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756/

    Important:

    Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

    I hope this helps. If the problem still persists, post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Thank you.

  • When I restart the computer, I get 2 boxes of RunDLL error appearing

    Hi guys,.

    When I restart the computer, I get 2 RunDLL error boxes that appear.  They do not seem to affect the performance of the computer, but they must mean something.  If I need, where can I get the new?

    Descriptions of the errors are...

    RunDLL
    THERE WAS A PROBLEM STARTING
    C:\USERS\ROSS\APPDATA\ROAMING\C_28595R.dll
    THE SPECIFIED MODULE COULD NOT BE FOUND

    RunDLL
    THERE WAS A PROBLEM STARTING
    C:\USERS\ROSS\APPDATA\ROAMING\pegibbfcm.dll
    C:\USERS\ROSS\APPDATA\ROAMING\pegibbfcm.dll IS NOT a VALID WIN32 APPLICATION

    I am running Windows 7 and my last update was KB2709981

    Thank you

    Ross_911

    Hello.

    Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
    1. after the download is complete, select autoruns & right click on it
    2. click on "extract here".
    3. on the extracted files, click "autoruns" application select it & right click and click"Open or run"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
    4. what which is complete, Open or run "autoruns".
    5. in the opened window, click 'all'.
    6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
    7 right-click & click delete & ok

    He helped?

  • During playback of a DVD on the computer I get good picture & sound of desktop speakers, trying to watch DVDs on adjacent TV, I get good picture but sound no., why?

    Can someone please help
    When playing a DVD on the computer, I get good Sound & picture on ajoining tv, I get a good quality image but no sound
    Concerning
    Darryl

    Sorry for this smithassoc

    Try this:
    Click Start, go to control panel and click on switch to Classic view at the top left if necessary, and then click sounds and Audio devices. You will then be presented with the options sound and Audio from your computer, click the Audio tab and select HD Audio (this can be named differently depending on the type of video card you are using) as default device and click ok.
    I guess maybe I should have asked, what video card are you using? As long as your video card supports audio HDMI then change the default audio device should solve the problem. If the video card is not taken support HDMI audio, then you need to connect the sound card to TV via one of the audio, the sound card options.

Maybe you are looking for

  • Tecra M9 - problem of extension Nvidia dual screen Mobile

    At work, we use M9 laptops with Nvidia graphics card. We have these laptops moored on a Mobile extension material I set the laptop to display to two external monitors that works well, until we want to disconnect the laptop for when the laptop at home

  • Outlook express 6 when sending a message, the message 'hang up' in the Outbox

    Outlook express 6, when sending a message, the message 'hang up' in the Outbox, don't watch not in the box sent but is sent (confirmed) and continues to repeat the send action. I use outlook in private mode and a mode of business, private mode gives

  • I got the blue screen error

    I downloaded all of the DMP files. Here is the link https://1drv.Ms/f/s! AiDEMNAo22EVaaBIi8YzkYNNjP4 Post proposed by the facilitator for the appropriate forum placed

  • HP DVD1035r writer

    Windows XP Home SP3 Internet explore 8 Outlook Express 6 ==================== PROBLEM NUMBER 1 ================== I'm having some problems about the DVD1035r from HP writer: I insert a disc MAGNAVOX 'DVD-R' with a total of 4.7 GB of data, and a backu

  • DVD PLAYS FIXED NOW MENU START WILL NOT OPEN.

    FINALLY got the DVD player works but the start menu now works only local account and NOT on the administrator account. What is the problem with this garbage. If this isn't something its 3 more with Windows 8.1. What a waste of money.