Connects to a SATA power?

Similar Questions

• 860 - 160se CTO: install a SSD and SATA power connections

  I try to add an SSD for my computer.  Does anyone know the correct references to allow the DSS must be installed in drive caddies in the chassis?

  Also, I will need another cable to SATA power by the look of it.  I need an explanation of the various SATA ports on the motherboard to know that one to connect the new drive in.

  Thank you

  Hi @Roughneck42,
  
  Please become a member of the HP's Support Forums. I understand that you are have question for upgrade of your computer. I'll be happy to help you.

  By HP part Surfer screw is

  482291 - 001Screw - M3 x 5mmL, TT, second lieutenant, HI / TP

  The cable is

  809377 001

  Cable - SATA3.0, 185mm, ST - ST, RF

  The SSD are

  696356 033

  Disk hard - SSD, the GNRC, 512 GB 2.5 "SATA 6GBs 3

  6GBS Drive - SSD, GNRC, TLC 256 GB 2.5 "SATA3, 696356-035Hard

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Pavilion Elite 170f: SATA power connector

  SATA power cable has three connectors.  One is connected to the HARD drive.  Other two are as in photo.  What do I need connect another SATA drive to this cable?

  

  Glad to be of assistance.

• Pavilion m9400t CTO: connection cable of the power supply to a Pavilion m9400t CTO

  I installed a replacement PSU which has more cables and a few different - no problem on the identification and plug 20 + 4, 4 + 4 on the MB.  Also, no problem connecting to the SATA cables for drives (HARD drive and two optical drives).  There is a PCI-E cable, which without doubt, I do not for my graphics card NVIDIA to address (original) does not have a connector to it.   But I am confused and I want to be sure, I'm not spoil, I have another cable with connector Molex 4, nowhere I see to connect.  Without doubt, it is for the power supply of the fans and other devices - my PC feeds its fans of the power supplied to the motherboard? Can I just ignore that cable operators, for now?

  Hello

  If you're implying that all your existing devices have power wires going to then simply ignore them the molex connector 4-pin.

• Inspiron 3650 SATA power cable

  I want to add a new hard drive to my new Inspiron 3650. I have the sata cable, but looks like I need to buy a power cable. What I should buy and where can I get a? Thank you

  I had the same problem trying to get the secondary sata power cable to the sata 2.5 drives. In the first command, they sent me the primary sata power cable that has only a single sata power connection and a connection from dvd player. P/N = KC81G. The sales rep insisted it was the right cable.

  I called back and discuss it with another sales who has been able to help me. She said yes, there are 2 different reference numbers and the correct is P/N = GP2JM. Once I received it I installed it and it worked perfectly.

  The part costs $4.99 with free shipping.

  Oh, they have no photos to show what they look like.

• Adding second DVD - Rom SATA HP Pavilion with only 2 SATA power connectors.

  Try to add a second SATA DVD Rom but do not see more SATA power connectors?  I tried to discuss with Tech, desperate!  Don't understand.  The system came with a SATA hard drive and a SATA DVD/BlueRay so both SATA power connectors are used.  I do not see another SATA power connector in the system, but there are at least 2 connectors SATA DATA more on the system board.  You can even add the old style DVD of as the connectors on the system board do not exsist for the old style DVD ROM.  What they do a converter to SATA power adapter or am I missing something?  Strange.

  If there is not a spare SATA power connection, maybe sometjhing like this would help:

  http://www.satacables.com/HTML/Molex-to-SATA-power-15-pin-ADA.html

• HDD WD20EARS to HPE 112Y - power to SATA power connectors - only P4 Molex available?

  Hi all

  I bought a new drive HARD for Western Digital (WD20EARS) and when I went to install in my HPE 112y

  I saw that the harness for my existing WD10EADS had the usual black SATA power connector (labeled P9)

  plugged in,

  still on the same spot next to my main HARD drive did not exist another SATA Black Power Connector for my new HARD drive but a great white molex 4 driver female connector P4

  I searched through the bundle of cables, Power Supplies, but I have not found another available black SATA power connector.

  So very quickly what I thought would be a simple upgrade of HARD drive stopped me in my tracks.

  So, my questions are...

  (1) can I buy an adapter's cable to power the existing WD10EADS as well as my new HDD WD20EARS?

  (2) is there a short jumper cable that allows you to convert the white Molex P4?

  (3) should I just upgrade the existing LiteOn model of block of power SUPPLY PS-5301 - 08HA / power 300 WATT?

  If so, what is a good upgrade and did so for my HPE 112y? Necessary power, 400-500-700 watts

  I have a gateway FX541S with a power of 700FB1E Delta Electronics which has 3 SATA power connectors

  that align perfectly to each of its 3 HARD drive location... Very well!

  That's why I was surprised when I saw the problem I had with my RESUME, I was expecting the same thing.

  I never thought that I would have a cable problem, after that I got my new HARD drive.

  The HP Pavilion Elite 112y has two discs, Blu - Ray and DVD as well as a Radeon HD4350 Video card and now two HDD.

  Is 300 watts enough, even though both of my HARD drives WD Green drives are.

  Unlike my front door where security HARD drive in place with a lever and blade in the front or side according to the case law can be too LOL!

  My HPE 112y has a cage for two HARD disks that screw in place... I don't have the necessary screws.

  Where can I get these very short screws to ensure my WD HARD drive?

  I tried Lowes with no luck.

  Thanks in advance for any help.

  I went simple and fast 5 minutes HDD Upgrade which I have just done to my front door, a serious project with my RESUME.

  I still love my HP, but not too friendly!

  Bud

  Hi again,

  Update.

  I went to my local computer store and got an adapter 'Y' which connects Molex 4 male pins on the computers Molex 4-pin female connector, then to a 'Y' for two SATA power connectors.

  They were kind enough to give me a bag of screws for the installation of my HARD drive in the cage.

  HDD installed in the cage, connected new red SATA cable and power cable SATA and everything has been working well since!

  Thanks again,

  Bud

• ZTE open not light unless it is connected to the USB power source.

  Even with the battery fully charged, my ZTE open never turn on unless it is connected to a USB power source. Once connected, it can be started, behaves normally and can be disconnected.

  You should contact the owner of the eBay store in this case.

• ProBook 4530 s BIOS update fails - "...". the computer is not connected to the external power supply. »

  I made an update of the system to the original settings and everything seems to go as usual.  While performiong the many windows updates, I noticed that the battery indicator indicates "no battery installed.  I found a few solutions dealing with this problem (none of the other solutions worked) and that which is shown updating BIOS.  I checked and the BIOS is F.07 and the current version is F.41.  I downloaded the update and begun the process of Windows.  The system restarts to start the process, but when the BIOS updated starts I get the following message:

  "A significant update of the BIOS of the system is available, but the computer is not connected to the external power supply.  Please connect the external power supply and then press Enter to continue. »

  The computer is connected to the power of HP to the original address since it is the only way so he can turn it on.  I tried removing the battery and from the update only the connected power and get the same result.

  Either way, I tried to insert a different battery, I have more than one of these laptops.

  Sorry

  Please test the battery after boot press F2 HP Diagnostics

  http://support.HP.com/us-en/document/c00821429

  and calibration of the battery for laptop

  http://support.HP.com/us-en/document/c00817650

• SATA power for Slimline 450-121

  Just bought a drive additional sata hard. (to be added as a second drive)

  I see the (data) sata plug on the motherboard, but the power supply has only 1 sata power cable.

  How can I add power to my extra (second) drive sata hard?

  I watched 2 docs that are no help:

  https://t.co/QXaueAKFFj

  https://t.co/ugPaqxrwjX

  There are two ways to solve this problem.  You can get ONE OF THESE(simpler).  Or if the power supply has the former molex connectors, get ONE OF these, that simple.

  BTW: I guess you know if there is a spare Bay drive.

• sudden loss of battery power, connection lost, lose all power from power supply disconnected, does not recognize battery

  I have a Sony VAIO & use the largest of the battery (extended life) since I bought it 3 years ago fighting.  I was always able to automatically switch the power supply of the battery by simply unplugging, or computer plugging in AC on leash.  And, I was always able to see the battery down icon to the left of the screen (taskbar) & it would show % battery remaining.  Now, all at once, as soon as the power supply cord is UN-plugged the laptop turns off completely, no reserve power at all & I can't find the info of the battery. anywhere on the computer.  Icon no longer appears in the lower left corner & when I go into the power settings, the "Battery 1" icon is grayed out, so it seems that the computer is not finding all the batteries.  It happened so suddenly.  Could battery comes essentially lost all its power & become non-existent to the computer, or is this a computer problem, battery not recognize.  Not sure if this puts some I can fix somewhere, or if I need to have a computer repair man to fix the real computer.  Please HELP, I am desperate to solve this problem, as a laptop does not really serve its purpose if it must be connected to the hard power all the time!  TX in advance for a help, suggestions.

  Yes, most things are cheaper to replace than to trouble.

  But if the laptop seems to work ok otherwise, he might just be easier to see if there is a recall on the faulty battery or if it is still under warranty.  In addition, sometimes you can add a little more memory to the old system and see some performance improvements

  on the other hand, replacement of the laptop can be problematic because the old machine has all the programs installed on it, registered product keys and has accumulated years of personal files.  and sometimes old expensive programs won't work on newer versions of windows.

  the argument would be to close the new machine on the standards you eventually accept.

  DB·´¯'·.. ¸ >-))) º > ·´¯'·.. ¸ >-))) º > share nirvana mann

• I can not sincronize my Blackberry Desktop Manager with Windows Live. I get the message "unknown error reported" How turn off the connected BlackBerry smartphone advanced power management features

  I'm on resolution 5, I used four different resolutions and none of them work, and I do not understand how to apply the meanless 5. Resolution 5

  Turn off the connected BlackBerry smartphone advanced power management features. For more information about how to disable the USB selective suspend feature in Windows, visitMicrosoft Help and Support site and search for "disable usb selective suspend."

  See if http://support.microsoft.com/kb/902274 help
  --
  ..
  --
  "andresgn" wrote in message news: 9754 c 356-97ed-4b9f-8dc5-c3318a6dc60b...
  > I'm on resolution 5, I used four different and no resolutions are
  > work them, and I do not understand how to apply the meanless 5.
  > Resolution 5
  > Turn off the connected BlackBerry advanced power management features
  > smartphone. For more information about how to disable the selective USB
  > suspend functionality in Windows, see the Microsoft Help and Support site
  > and look for "disable usb selective suspend."
  >
   
   

• HP compaq 6000pro sff. SATA power cable was stolen and now I am unable to find a replacement one.

  The SATA HARD drive power cable comes from the motherboard and not of supply as it used to be. For this reason, I can't find a compatible with 4 pins (as a connector to THE) to the SATA power cable.

  Here is the list of parts: http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c01883661/c01883661.pdf

  The reference is 581355-001 see: http://partsurfer.hp.com/ShowPhoto.aspx?partnumber=581355-001

  You can web it pick up the prize.

• HP 6120 t BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller

  Hello

  HP 6120 t (vista) BIOS does not recognize the second IDE hard drive connected via IDE-SATA controller. The other SATA disk and the DVD player came with the machine.

  I hooked my old 200 GB Hitachi drive via the controller. I also put the jumbers in the present as a slave. I also took the original WD drive and just connect the IDE hard drive. BIOS do not show any drive at all.

  I would try something possible at this time I have a lot of my data on the old disk.

  Thanks appreciate any suggestion.

  Try to enter the BIOS and I believe under change of Advanced menu of SATA to IDE or Enhanced.

  You need to do when you install Windows XP or you will get a blue screen and it does not start.

  Don't forget chang back when you put it in your drive home hard sata.

• Error message saying the driver is unavailable when I connect my camera Canon Power Shot S 30.

  I have Windows 8 and I get an error message saying that the driver is unavailable when I connect my camera Canon Power Shot S 30.

  Hi Marc and KatyReiling,

  Welcome to the Microsoft community.

  According to the site Internet on Canon Power Shot S 30 camera doesn't have a driver according to this link

  http://www.USA.Canon.com/Cusa/support/consumer/digital_cameras/powershot_s_series/powershot_s30#DriversAndSoftware

  However, we need to know if you tried to connect the camera to a computer or another USB port?

  Let us know more information about the issue and we will be happy to help you.