Consistent black dots on printed

Similar Questions

• HP Laserjet P1102: Two rows of black dots on every print

  I recently removed the seals and tested a few impressions, but each of them contains two rows of black dots on the left side (a line more fat and other points more small rank). I did the cleaning print but no use. Here are some pictures of the question. I can print any document, but the points are the problem. I run on the genuine laser HP cartridge by default. Also, the points are spaced the same way.  Any help would be appreciated...

  No! The load inside the cartridge is bad

• Finally two updates slightly incompatible with Windows 8.1, appearance of flicker black dots on the screen?

  I would say that this last two updates. latest Firefox version 32.0 have a compatibility issue with Windows 8.1.
  My laptop newly bought worked fine with Firefox until recently. About two to three days before, during the navigation. blackheads should blink on the screen. At first, I figured well problem of pixel, but after testing the same sites with IE 11, these black glitter points seemed not at all. I tested it with chrome and no points.
  These black spots have not appeared before on Firefox, only recently. Unfortunately, I'm very uncomfortable with the use of Firefox that I had been using this browser since 2005, but this compatibility issue makes it difficult, cause flickering points can be annoying.

  What you describe was reported before and it is almost always bound by graphics drivers. Firefox will (by default) use hardware acceleration to help speed up the rendering etc. On some graphics cards/driver combinations (most with Intel video) people reported black dots. Disabling the hardware acceleration option usually clears this up.

  Does look like this: https://bug913419.bugzilla.mozilla.org/attachment.cgi?id=831738

  Some other threads for reference:
  https://support.Mozilla.org/en-us/questions/974717
  https://support.Mozilla.org/en-us/questions/856277

  It is not limited to Win8.1 - were reported on both Linux and workaround there is to change the method of hardware acceleration... until the Intel video driver has been updated.

• Portege Z930 - black dots on his gray paint

  Hello. My name is Nicolas.

  I have a few black dots on my Ultrabook, seems to be a default factory or struct.
  I would like to know why is it caused by, because it looks like bubbles and this means that they could not be caused by a success. They have very few brands, such as 0.5 mm to 1 mm in diameter (or points).

  I hope you can help me.
  Thanks in advance,

  Nicolas.

  I put t know what do you mean with black dots.
  You write about dead pixel?

• Firefox 3.6.10 allow me to choose a black cartridge only printing one my HP Officejet 6500 (not wireless).

  Selector only black cartridge is not active.

  The problem is your printer:

  Also, I have the OfficeJet 6500 and had the same problem. Black text was printing with a mixture of colored inks rather than black ink, resulting a gray, fuzzy text. I finally found a solution. In each application under Page Setup, there is an option called "Format for". Mine was created for "any printer". I changed that to "Officejet 6500 E709n [830E4A]" and now it prints black very well. I have a Mac running 10.4.11. I hope this helps.

• Why is there a small black dot on my screen?

  I bought a Macbook Pro 13 "with Retina display (2015) one week before and today while browsing in Safari, I noticed a small black dot on the screen." The point has been made on this spot on the Web site, it is not set on my screen. Once I have to zoom, or refresh the page several times or even scroll to the bottom of the page, point disappears. I opened a blog more on the same site, and I found another point identical. Once more, it seems not be it resolved in the screen, it is instead made to this position of the screen.

  I opened a few several other Web sites and pages with a white background, I did not see the dot appear. I'm uploading a picture so that you can see the guys. Someone had this problem? I know that it is nothing, but I can't take it anymore and I need an explanation any. Thanks for your help. Here is the image:

  

  I have not encountered this problem.

  There is nothing wrong with your Mac.

  Contact the owner of the blog site.

• Failure of Black Dots and device - Tecra 8100

  Hey all, I was just given this Tecra 8100 and 2 of the many problems with it are that random black dots appear on the screen... and sometimes windows crashes due to a failure of the device (the monitor I guess). He got a new installation of XP Pro from about 20 minutes ago.

  Anyone got any ideas?

  Hello

  I have really no idea why this happen. One of my friends has installed Windows XP Home edition on his old Tecra 8100 and everything was ok except the modem and infrared. The only thing I can recommend is to install SP1 and check if the problem persists.

  If this is not the case, try installing W2000 or W98SE to see if the same problem occurs with this two supported operating systems.

  Good bye

• black and white printing on HP Officejet 6700

  I have an IMAC 10.8.1 operating system.  I can't get my 6700 HP to print only black and white.  Even when I choose black and white printing, it will not be printed like that.  I can't implement any new printing preferences.  Now, I'm unable to print anything and yellow ink.  Went and bought a new black ink and printer recognizes that black ink is full.

  I don't know just something I am doing wrong.  Can anyone help?

  
  The application that you are trying to print from, launch the print dialog box (file > print).

• DeskJet 3520 black does not print

  I have a 3520e all-in-one Deskjet printer and I just replaced the cartridges in it all, because they were empty. Now, all of a sudden, the black will not print.

  I've done all the fixes proposed by the documents of support on this Web site. The cartridges are genuine, I bought them on the HP online store, they are installed correctly and properly ventilated. I had an alignment, but also print head cleaning. I used the app HP Scan and printing doctor who says that there is nothing wrong with my printer.

  I don't know what else to try at this point except maybe by yet another cartridge to see if someone else would work. I never had problems with this printer before.  I would like suggestions. Thank you!

  So far, there is no solution for this problem. Since my camera is out of warranty, I chose to do not call HP because I don't want to pay for a telephone diagnosis that will tell me what I already know: it is a hardware problem. I know now, so it's the printer and not the ink, because I bought and installed an another black print cartridge and still have had no luck. I got a free chat with an agent at best Geek Squad to buy today, who confirmed my suspicions that this is probably a hardware problem. I'll take the camera this weekend at their shop for repair.

• black and white printing

  Hej
  I have the MacBook Pro and HP Photosmart Premium printer and I have a serious problem to find the settings for black and white printing (no colors). I think I've checked everything. I would really appreciaty advice to solve this problem.

  Hi @Zuska,

  Thank you for visiting the Forums from the HP Support! I see that you want to print in black ink only on your printer HP Photosmart Premium with your MacBook Pro. Please follow the steps listed below:

  Printing with the Black Print Cartridge-only option

  1. Click file and then click print.

• OfficeJet 6000 E609n: One color (black) does not print

  Background the color black does not print.
  Background page printed from the printer status indicates that there is no black ink. This impression has said that there is sufficient (at least 20%) supply of three coloured inks. Per the comment above, no black printing does appear on the page printed of the status of the printer, even if the black cartridge has been rather recently installed (2015-12-24).
  Background none of the four "low ink" lights on the printer are turned on.
  Background the State indicated by the HP Solution Center utility displays a green check mark, that is to say, that everything is OK.
  Background the "estimated ink levels" in the utility HP Solution Center indicate that the black ink cartridge is about 60% full.
  Background I've done the first of these two cleaning procedures to clean the print head. It produces no change. (In fact twice.)
  Background I removed the power cord to the printer and unplugged the power cord from the source and then wait 10 seconds. Then I reconnected things together. Nothing has changed.
  Background I cleaned the vent for the black cartridge.
  Background I replaced the black cartridge. The level indicated on the "Estimated ink levels" in the HP Solution Center utility now indicate that the black ink cartridge is 100% full.  No change.

  Background now, I think that the problem may be the print head.  I am discouraged.

  Any suggestions?

  Hi @Upper_Left,

  It seems as if the HP product registration service is temporarily unavailable.

  Normally you get invited to register immediately after installation is complete.

  It's a Web page that can help you know if the printer is listed, or as aid re-register once the number of available service - Registration Question Index.

  The term of defective kernel is used which means that the defective part you are replacing is the same part that you send back.

  When you select the option to change the replacement part is usually repaired or refurbished, is why there is such a difference in price between the parties. It seems that if the defective part is not returned within the specified time. 'faulty base tax' is loaded.

  I can't say for sure 100% that the problem will be resolved to the replacement printhead. If the printer was in warranty, it would be the normal order of operations.

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.
   
  Thank you!

• HP Officejet 4630: Black ink is printing half of lines

  

  This is an example of how the documents printed on my printer now. I tried to align my cartrigages three times. It seems that my color cartridge works fine, but it's my black which is not. I reinstalled them both twice and nothing has helped. What is going on?

  Type of printer - HP Officejet 430

  type of computer - HP ENVY TouchSmart 360 x

  The question seems to be an electrical connection between the printer and ink cartridge.  Try printing a test page, as shown below.  Is the black stripe large print only 1/4 or 1/2 of the height of the bars of color?  If so clean the printer and cartridge as shown in the document here contacts can help solve the problem.  Although this document was written for a series of different printers the same principle applies.

  If the procedure above does not resolve the problem, I'd say changing the black cartridge.

  Step 1: print a print quality Diagnostic report

   

• Why an I get the test page yellow and black with each print job. I have a HP PSC 1350

  Why an I get the test page yellow and black with each print job? I have a HP PSC 1350

  Hi - I assume that the page that you see printed is the alignment page.  This happens usually if the alignment process has not been made.  All you should have to do is take the printed alignment page and place it face down on the scan scanner glass and press.  Who must complete the alignment process and eliminate the page printing every time.  If you have problems, try following the procedure described in this document.

  Hope that helps.

• Canon MG5200 printer prints all colors except black in pink. So I can get black and pink print

  My printer is all colors except black in pink.  So I can get black and pink print

  Hello

  As Canon OEM is responsible for the good operation of the printer and their
  drivers provided. Check with Canon support, their books online and
  drivers and ask in their forums (if any).

  Canon - Support and drivers
  http://www.USA.Canon.com/Cusa/support/consumer

  Canon - Support - contact us
  http://www.USA.Canon.com/Cusa/consumer/standard_display/contact_us_consumer

  Canon - Windows - Vista and Windows 7 support
  http://www.USA.Canon.com/Cusa/consumer/products?pageKeyCode=windowsSupport

  Canon printer - page local confirmation - could be from another region.
  http://pdisp01.c-WSS.com/OS/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Black does not print

  OK, here's the problem and the remedies I've tried. Stopped printing in black, had half a black, but even when changed ink cartridge (all HP cartridges). Didn't work, cleaning print head, did not. Latest version of the re-load software from HP, has not helped. It prints nothing black but grey. And add to this problem, I keep getting message of paper when the paper tray has paper, rolls will pick up a sheet, stops and load paper guest turns. Have unplugged and reset with #3 without change. This has been a Fatima. Help!

  I talked to the support technique hp my black ink not printing not trouble. No technical support suggests to take;

  1. remove the black print cartridge on the location of the cartridge and gentle clean the wide screen inside the location of the cartridge with a cloth provide (like a handkerchief).

  2 - Insert the black cartridge and print an alignment test page

  3 - If the alignment test page (showing the cyan ink) printing, this clearly indicates that you do not have a problem of printing ink but it does not indicate that you no longer have a printer to work according to the HP Technical Support. Claiming that the trucking for cartridges is damaged.

  If you have any questions about this, you can call HP to the 1-800-474-6896 they will be happy to replace this printer with a reconditioned printer that is a printer, that it comes from another bank (excess inventory) which is out of the box by the provider (HP) and sent to their technical service for refurbishment for use of HP. They are reasonably priced anywhere from $ 98 to $ 150 depending on the model. If you decide to replace your printer I'd get the guarantee of $1.00 for two years like this if you have the same problems, they will replace the free printer. Oh I mentioned that you can still use the ink cartridges even if you order a product that can take the same cartridge that belongs to you. Shipping is approximately 7 working days. HP will give you a tracking number for printer and warranty.