console view disk management is obsolete... Help!

Similar Questions

• DISK MANAGMENT I NEED HELP

  I wanted to delete some files to my sd card. Deletion was not available because the files have been write protected. This is what I found and need help; This sd card in my computer as drive H: properties show that the - STORAGE THAWED and the FILE SYSTEM - TYPE FAT32. First of all, I tried to restore the site, it did not work because the disk is write protected. I have unlocked next to sd Card reader and tried again. This did not help. I then looked at disk management and removable disk 1 3.6 GB read-only (h :)) Primary Partition.)

  I don't know how it happened and I want to be able to use the sd card, so I need help please.

  The card SD gives the same error if inserted in another computer? The manufacturer of the card provides a utility to try to wipe/format cards capricious?  The type of error that you describe usually happens when a card is defective or failed and usually nothing you can do will remedy the situation.

  writing in the new message: * e-mail address is removed from the privacy... *

  I wanted to delete some files to my sd card. Deletion was not available because the files have been write protected. This is what I found and need help; This sd card in my computer as drive H: properties show that the - STORAGE THAWED and the FILE SYSTEM - TYPE FAT32. First of all, I tried to restore the site, it did not work because the disk is write protected. I have unlocked next to sd Card reader and tried again. This did not help. I then looked at disk management and removable disk 1 3.6 GB read-only (h :)) Primary Partition.)

  I don't know how it happened and I want to be able to use the sd card, so I need help please.

• Cannot change the drive letter. Obsolete disk management console.

  Original title:

  Help me please. I'm so sad

  my score is not see the...

  I have a problem, I ask you to solve

  

  I have suffered from an attempt to repeat to restore my driver context

  Please I want a solution to restore my files that were on this context

  

  and here

  

  What should I do

  I don't want to run out of data

  Please I want a solution

  big THX Microsoft

  Please take a look at the following links:

  http://support.Microsoft.com/kb/2001877

  http://social.technet.Microsoft.com/wiki/contents/articles/19472.Windows-Server-the-operation-failed-to-complete-because-the-disk-management-console-view-is-not-up-to-date.aspx

• The operation did not complete because the disk management console view is not updated.

  Disk title management error: Windows 7 original by adding a drive letter
  Well, I don't know why this is happening, but if I try to add a disk to my windows system, it will not automatically add a drive letter, but it will add a drive letter to my USB and USB external drives without problem. It's just when I plug it in sata he's going all wobbly. I see the HARD internal disk in disk as a disk, but windows disk management Refuses anyway shape to add a drive letter, even with diskpart automount enabled. This is the error I get when I try:

  "The operation failed to complete because the disk management console view is not updated. Refresh the view by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »

  Absolutely nothing works. I tried Diskpart, acronis, AOMEI, EausUS, chkdsk, sfc/scannow, Microsoft fixit. Nothing works to get the drive Manager to add a drive letter to an internal HARD disk. Like I said, sticks and USB drives are no problem. I looked all over Google and I have not seen one solution to this problem short of a total erase and start again, and at this point, I'm not be done with everything I installed and might have to reinstall.

  I have other systems that do not have this problem. Just this one windows 7 install x 64. Can anyone shed some light on why this happens and how to fix it or if there is even a fix for it.

  Thank you

  Methadras

  Just to follow and finish this, the old MAIN drive has had some problems and was

  continues to worsen, it ends up by crashed.  scannow revealed some Windows system

  Files were corrupted and could not be repaired.  After the crash, I used the blank hard disc 500 gig

  and did a restore of the system since the disks created with the purchase and restored the system to

  "DAY 1".   Yes all the data and installed programs are missing, but I reinstalled my software.

  Adding external or internal disks worked without any problem now.

  I created a Windows 7/64 system repair disc.

  I created an Image of the system.

  I have a backup plan.

  I do the scheduled backup.

  I learned a lesson...

  Joe_T45

• View of the Disk Management Console is not updated.

  I use win 7.
  I tried to change the size of the disk by using the magic of the partion and it failed. He asked me about a wrong address, and I click on continue (I guess he's changed the logical address).
  Now I can't see my partion (D) to the workstation.
  When I run windows disk management and try to change the drive letter, it is said: "the operation failed to complete because the disk management console view is not updated. Refresh the gwendoline by using the refresh task. If the problem persists close the disk management console, then restart disk management or restart the computer. »
  I tried with windows Diskpart to mount the partition but I can't. If I have the volume list, it shows me only (C), but if I list the partition, then it shows me all the 3 partition:
  Partion 1: OEM
  Partion 2: primary
  Partion 3: primary
  but I can't access partition 3.

  Hello faithful,.

  Have you tried to use other third-party programs to "manipulate" the discs?  It seems that even if Palcouk $ million question with is it compatible, so I shot to the top of Partition Magic site and see the this PM 8 is not compatible with Windows 7.  I would try to see if you can access the partition from the command prompt, but I promise that would work.  Have you created a backup of your data before you do?

  I would say go to the link below and post a question with the community to see if you have viable options to recover from this.

  PartitionMagic 8.0 system requirements

  http://Service1.Symantec.com/support/PowerQuest.nsf/docid/2004050716123662?open&docid=2004050712232662&NSF=PowerQuest.nsf&view=6c360f88152ecfce88256e91005066ac

• To create the distribution with the help of disk manager.

  Dear all, I m facing problem with blue screen error. And my all partitions is corrupted and I like repartition with the help of disk manager. Win xp bootable cd its not working. so pls help thank you & best regards

  Hi zubair.

  · What is the exact blue screen error you receive?

  · What happens when you try to boot from the CD?

  · You want to reinstall or restore the system?

  · Do you remember any changes made on your computer before the show?

  · Are you able to boot to the desktop?

  · You have saved the data?

  You can check the links below: how to use disk management to configure basic disks in Windows XP:http://support.microsoft.com/kb/309000

  How to partition and format a hard disk using the Windows XP Setup program:http://support.microsoft.com/kb/313348

  Best practices for partitioning a hard drive:http://www.microsoft.com/windowsxp/using/setup/expert/tulloch_partition.mspx

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Need help installing a Raid0 in Win7Pro disk management.

  I had a raid but only one drive died and I'm trying to get a new will raid0.  I have an SSD for the boot drive and two new Sata Seagate 3TO disks for the raid.  They are installed and the Intell Rapid Storage Technology Software sees them and I used that to create a new switched-on and both drives are chosen as members.

  Now I go to disk management in Windows, but I forgot what to do now. Initialize disks, make them dynamic with GPT partitions and choose them as striped readers?  Just not sure of the procedure.  I have a motherboard Asus P9X79 WS with UEF Bios.

  Personally, after seeing the problems, I use raid, except that using a third party hardware raid card and for redundancy, I more than two disks, at least one more of a resumption of the fall-over

  A decent raid card costs about $500

  RAID 0 is a striped raid configuration

  Help manual Asus has instructions

  or http://www.howtogeek.com/howto/36504/how-to-create-a-software-raid-array-in-windows-7/?PageSpeed=noscript

  I don't know about whether the raid controller you are using supports a resumption of the fall-over with additional disks

• I am installing a seagate 500 GB internal hard drive, when I go to disk management, the drive is there, but I can not format because you know not initialized. can anyone help please

  I am installing an internal hard drive 500 GB seagate on my computer, when I go to disk management, the drive is there, but I can not format because it is unknown / not initialized. can anyone help please

  Try one of the two utilities below to partition and format the drive.

  Partition Wizard Home Edition:
  http://www.partitionwizard.com/free-partition-manager.html
  Note: There is also a CD bootable or versions of the bootable Flash drive:
  CD: http://www.partitionwizard.com/partition-wizard-bootable-cd.html
  Flash player: http://www.partitionwizard.com/bootable-flash-drive.html
  Among the features and functions: create partition, Delete partition, format partition,.
  A partition resize, move partitions, restore Partition after an accidental deletion, convert partition, Explore, Hide partition partition,
  Change the drive letter, a partition active Set, Explorer (content display) of the partition.
  Note: To achieve any task using the "Operations pending" box at the bottom or top left.

  Alternative to Partition Wizard (a bit easier to use, but Partition Wizard and EASEUS have almost identical user interfaces)
  EASEUS Partition Master Home Edition (free):
  http://www.partition-tool.com/personal.htm
  Partition software ALL-IN-ONE and the most convenient hard disk partition manager Kit
  Includes Partition Manager, Disk & Partition copy Wizard and Partition MBR and GUID partition GPT disk recovery Wizard (table) on Windows 2000, XP, Vista, Windows 7 and Windows Server 2000/2003/2008 (32-bit and 64-bit).
  It allows users to resize/move Partition, drive system extend, copy Disk & Partition, Partition merge, Split Partition, redistribute free space, convert dynamic disk, Partition Recovery and much more.

  J W Stuart: http://www.pagestart.com

• Windows Disk Manager XP SP3 sees no no new hard drive

  I added a new slave SATA drive.
  The BIOS recognizes the drive.

  Connected to the computer as the local administrator.
  Manager displays the drive.
  Windows Explorer shows the drive.  When I click on the drive, the system responds with "access denied."

  Question: The Windows DISK management does not display the drive.  That's why I'm unable to format the drive.  Help!

  I swapped the drives and tried another new hard drive.  Still having the same problem.  Is there a registry setting?  or something that prevents this?

  The BIOS must be set to SATA or RAID. Default settings don't

  include both, generally, in "Advanced chipset" nec IDE SATA &, if cela of

  the case. If nec either and have the xp installation cd, boot the pc on a cd, press F6

  key when you are prompted, install floppy SATA/RAID (provided by mfg or get to the controller)

  MFG web site), choose the setting, auto racing, reinstall, select setting, let it run, then press

  Enter the key, on the menu for the xp cd, press r for recovery console, select 1 for C: press on enter

  password, type: DISKPART DISKPART in DiskPART, select new SATA hd, create a partition,

  Press the key type, ESC: /NTFS D: (D: being hd SATA), once its format thru:

  OUTPUT

  Let xp boot, open diskmgmt.msc in msc, new L.click hd, take action, all, select

  'activate', close msc.

  In addition, the disk must be a MS-DOS floppy disk format, then install the SATA/RAID

  free software...

• 'Logical disk manager' found at the start of Win xp all the time

  Hello, all the...

  I get a 'logical disk manager' found to boot Win xp message all the time on start or restart... 100% of the time.

  I can use all the facilities of the computer from the disk management, but I' like this message to go.

  It is anotebook with a connected external USB drive sometimes. I also use an ethernet to usb tot internet connectivity device.

  Would appreciate a solution.

  Hello

  I suggest you to refer to the following Microsoft article and check if it helps.

  The logical disk Manager Administrative Service hangs as it begins:

  http://support.Microsoft.com/kb/307309

  Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 )

  Hope the information is useful.

• To install the new eSATA / SATA to USB 2.0 hard drive in an external enclosure but the computer does not recognize the drive in disk management

  I have an old computer with installed Microsoft Windows XP SP2 and 3.  I bought a new hard drive and also a new external hard drive for her case.  I have correctly installed the hard drive inside the enclosure, and I think that I have installed correctly (in the motherboard SATA port) eSATA port, according to the manufacturer's instructions.  I plugged everything... first eSATA, then power and power switch.  I restarted the computer, and I chose to analyze disks in disk management.  However, the new drive is not recognized.  The SATA port on the motherboard could not work or did I buy the bad, perhaps, hard drive enclosure for my system?  Or something related to the software?  Thank you.

  Hi Donnadream,

  Connect the hard drive to another port and check if that makes a difference

  Step 1: You can follow the steps mentioned in the article below, which deals with a similar question

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Step 2: Download and install the latest drivers from the chipset of the computer or the manufacturer of the motherboard and check

  Step 3: Hard disk can be turned off in the BIOS; You may want to enable

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  If the problem persists, it is a hardware problem, contact the manufacturer of the hard drive for a more specialized help

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot assign a drive letter using the Vista Disk Manager.

  I read these latest solutions possible, but here's my problem.  I need to connect directly a 3.5 drive I pulled a SIN of hammer to my laptop running Windows Vista... because I need to recover a folder deleted this drive 3.5 with software that only works on the directly connected motors.  Software of network recovery might work, but it seems too expensive for just the recovery of this folder.  I connected the hard drive directly via the USB port.  The system tray sees the device, but the Explorer is and of disk management to assign a drive letter is greyed out.  Please help with assigning a drive letter.  There is only one user on the laptop which is also the administrator.  Thank you!

  In my view, that Hammer NAS units are based on Linux. Therefore, the drive is probably _not_ formatted with a filesystem Windows reads/writes. Making it very difficult to recover the folder removed since all things you could do to convert to NTFS, say, will also make little probable that you can recover deleted files. Eventually, you could use one of the Linux flavors running from a DVD, for example, Ubuntu and recover the file by using a Linux tool or set the drive on a Linux machine.

  Tom

• My computer does not display the correct names of my hard drives, but because of disk management.

  original title: Hard Drive rename BUG

  I have a problem with the change of name of the hard disk.

  Disk Management displays the names for each partition, but when I open my computer C only a specific name, the rest of the partitions are named local disk and if I try to change it by right clicking Rename or properties and change volume name, after clicking on ok nothing happens, but more funny that I go to disk management and I can see the change in the name of the partition , but Explorer keeps showing local disk, drives me crazy.

  I am running windows 7 Pro.

  Someone please provide solution.

  Thank you.

  Hello

  Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  (http://windows.microsoft.com/en-GB/windows7/Back-up-the-registry) How to back up and restore the registry in Windows

  You can try these:

  a. open the Start Menu.

  (b) in the area of the white line (search), type regedit and press ENTER.

  c. click on the button continue in the UAC prompt.

  d. in regedit, go to: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\explorer

  e. in the left pane, right-click on explorer.exe and click on New and key.

  f. type DriveIcons and press ENTER.

  g. in the left pane, click with the right button on DriveIcons and click on New and key.

  h. type the drive letter (EX: E) you want to change the route name and press ENTER.

  i. in the left pane, right-click on the drive letter (EX: E) and click on New and key.

  j. type DefaultLabel and press ENTER.

  k. in the right pane, click with the right button on (default) and click on change.

  To change the name of the reader - l.

  i. enter a name (Ex: My DVD), and then click OK.

  II. go to step n.

  Mr.. to restore the default drive name-

  i. leave it blank, and then click OK.

  II. go to step n.

  n. Repeat steps i to m if you want to add another drive letter icon to change.

  o. close regedit.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hitachi external hard drive not detected on Windows 7. Disk Management displays "No Media"

  OP: New computer with Windows 7 cannot display files on external hard drive Hitachi

  My Hitachi hard drive is compatible with Windows 7.  This hard drive was working properly with my old computer using Windows XP.  I can see the device in the Device Manager, but I can't view the files.  In disk management, the drive is listed at the bottom of the screen, but said "No Media", however there is almost 50 GB of data stored.

  The hard drive shows in the list of devices and printers when I opened that folder, but does not appear in the list of hard drives on my computer.

  I still don't understand what happened, but I've decided how to fix it.

  After trying my hard drive locked on 4 computers with Windows installed (two with Windows 7) and two with XP and having no success, I decided to plug it into a computer using a Linyx OS (Obuntu).  The computer recognizes my hard drive and open.  Then I was able to use the Windows System.  I managed to freeze hard drive again and he cured the same way.  Maybe this will help also, if you have access to a computer with this operating system.  Maybe a mac would also work.

• Unable to connect to the virtual disk Service, Virtual Disk Manager Interface not registered

  I installed Windows 7 Ultimate on this laptop as a new installation about six months ago.  Since then, I don't think I ever ran diskmgmt.  Today, I joined a new external hard drive usb, it reported the drivers installed fine, but then the installation bombed at the beginning.  I went to verity, what had happened and has run diskmgmt.msc (as an administrator), but she came back with the message "Unable to connect to the virtual disk Service" and also a small OK msgbox appeared with the title "Virtual Disk Manager" and the "Interface not registered" message

  I disconnected the USB hard drive and tried again diskmgmt, but no change.

  I restarted in safe mode, tried diskmgmt, but no change.

  I ran sfc/scannow, but it has reported that it found no errors.

  I checked that the virtual disk service has been configured as a textbook in services.msc, and event viewer showed that when I ran diskmgmt he started VDS and then stopped VDS.

  I tried again, but still not like before.

  Is there some dll I can't regsrv32?

  Thank you

  Marc

  Hello

  I suggest you to return the items for the following responses from Microsoft, he says same issues with trying the troubleshooting steps and check if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/cant-start-disk-management-unable-to-connect-to/31898500-9d84-4CB5-9ba3-c1f42e3b1ace

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/problems-with-Vista-after-unplugging-by-external/093f1660-160F-478f-b81a-493e963ffd9a

  http://TechNet.Microsoft.com/en-us/library/cc771775.aspx

  Note: it also applies to Windows 7.

  Hope the information is useful.