Constant BSOD/crash on Windows 8

Hi I just did a clean install of windows 8 pro last week. Since then, I have had several accidents. It is random when it happens, sometimes it will happen as soon as I start, sometimes a few hours later. I tried to find me a solution, but were unsuccessful. So now, I hope that someone here may be able to help me. I am blue screen reader, and every time it crashes it is because of ntoskrnl.exe any help would be greatly appreciated. I am also attaching a SkyDrive link with all the files of dump C:\Windows\Minidump.

Minidump link: http://sdrv.ms/125t7Ga

Thanks in advance,

Dennis

DJH

It's all related material.  There is a small chance that your Kaspersky remains may be the cause so I remove it and using Mse instead

Kaspersky is a common cause of BSOD.
I remove and replace it with Microsoft Security Essentials at LEAST FOR TESTER.

http://support.Kaspersky.com/downloads/utils/kavremover10.zip
http://www.Microsoft.com/security_essentials/

Stop 0 x 124 is a hardware error
If you are overclocking try to reset your settings to standard processor and see if that helps.
If you keep getting the BSOD here are things more than you may want.
This is usually hardware related, defective heat, memory or processor even if it is "possible" he is associated (rare) driver.

Stop 0 x 124 - what it means and what to try
Synopsis:
A "stop 0 x 124" is fundamentally different from many other types of bluescreens because it arises from a complaint of material.
Stop 0 x 124 minidumps contain very little concrete information, and it is therefore necessary to address the problem as a case of material in an unknown state of distress.

Generic troubleshooting ' Stop 0 x 124 ":

1) to ensure that none of the hardware components are overclocked. Material which is pushed beyond its design specifications - by overclocking - may malfunction in unpredictable ways.
(2) ensure that the machine is sufficiently cooled.
If there is doubt, open the side of the case (be aware of all the relevant conditions guaranteed!) PC and direct an electric fan squarely to the motherboard. Who will rule on most cooling problems (lack of).
3) update all drivers related to materials: video, sound, RAID (if applicable), NIC... anything that interacts with a piece of hardware.
It is best to run the latest drivers anyway.
(4) update the BIOS of your motherboard according to the manufacturer's instructions.
Their website should provide detailed instructions on the brand and model-specific procedure.
(5) rarely, bugs in the operating system may cause "false positives" 0 x 124 events where the hardware wasn't complaining, but Windows thought otherwise (because of the bug).
At the time of writing, Windows 7 does not have to suffer from a defect, but it is nevertheless important to keep Windows up-to-date.
6) trying (stress) test these hardware components that can be put to the test artificially.
The most obvious examples are the RAM and HDD (s).
For the RAM, use the 3 rd-party memtest86 utility to run several hours a test value. (6-8 passes to stress the ram)
For hard drives, verify if CHKDSK /R finds any problems on (s), including "bad sectors".
Unreliable RAM, in particular, is mortal, as well as software, and anything other than a 100% clear memory test result is cause for concern. Unfortunately, even a 100% clear result the diagnostic utilities does not guarantee that the RAM is free of any defect - only that none have been encountered during the test passes.


7) as the last of the non-invasive troubleshooting steps, perform a "Vanilla" Windows reinstallation: just the OS itself without additional applications, games, utilities, updates, new drivers - or ANYTHING that does not come from the Windows 7 disc.
Who stops working mitigate the problem of the 0 x 124, jump to the next step.
If you run the "Vanilla" installation long enough to convince yourself that not a single 0 x 124 accident occurred, start installing applications and updates slowly, always stopping between successive additions long enough to get an idea of the question if the machine is still free of 0 x 124 breaks down.
Smash back, obviously the latest addition of software may be somehow connected to the root cause.
If the stop error 0 x 124 persist despite the above steps, and the equipment is under warranty, consider to go back and ask for a replacement that does not suffer periodic MCE events.
Be aware that want to perform the subsequent hardware troubleshooting steps can, in some cases, void your warranty:
(8) clean and carefully remove the dust inside the machine.
Reinstall all memory modules and connectors.
Use a can of compressed air to clean the RAM DIMM supports as much as possible.
(9) If all else fails, start removing items of hardware one by one in the hope that the culprit is something non-essential that can be eliminated.
Obviously, this type of testing is much easier if you have access to equivalent components in order to perform swaps.

If you are in the situation to have completed all the steps above without a resolution of the symptom, unfortunately the most likely reason is that the error message is literally correct - something is fundamentally wrong with the hardware of the machine.

Tags: Windows

Similar Questions

  • Constant BSOD! Help, please!

    Get the constant BSOD stops. More than 5 - 10 times a day! I have no idea, and also my knowledge, everything is up-to-date. Help, please! :(

    Here is a link to my most recent minidumps.

    Current Minidumps link

    http://www.mediafire.com/download/76d7v7z904d6o46/CrashMinidumps.7z

    These accidents were caused by the corruption of memory (probably a driver).  Run these two tests to check your memory and find which driver is causing the problem.

    Don't forget to download any other DMP files (especially those running auditor)

    If you are overclocking reset all default before running these tests.
    In other words STOP!   If you don't know what it means that you're probably not

    1 - Memtest.
    Download a copy of Memtest86 and burn the ISO to a CD using Iso Recorder or another ISO burning program. Get it here
    Boot from the CD and let it run at least 5 or 6 passes.
    Remember, anytime Memtest reports errors, it can be bad RAM or a bad motherboard slot.
    Test the sticks individually and if you find a good, test it in all slots.

    Any error is indicative of a memory problem.
    If a well-known stick fails in a slot of motherboard, it's probably the slot.

    2. Driver Verifier
    Using Driver Verifier is a dubious proposition. Most of the time it will crash and it will tell you what is the driver.

    But sometimes it will crash and will not tell you the driver.
    Sometimes it will crash until you can connect to Windows. If you can't mode without failure, then you will have to resort to editing the registry offline to disable driver verifier.
    I suggest that you first back up your data and make sure you have access to another computer so you can contact us in case of problems.
    Then do a system restore point (so you can restore the system using the functionality of Vista/Win7 Startup Repair).

    Here is the procedure:
    Click Start and type "auditor" (without the quotes) and press enter
    Select 'Create a custom settings (for code developers)' and click 'Next' (or Type "check/standard/all" (without the quotes) If you want to check each of them (this will slow down your computer))

    Choose "Select custom settings from a full list" and click "Next".
    Select the entire document except for "Low resource Simulation" to win 8 do not check concurrency stress test and the verification of the conformity of DDI, click "next".
    Select "Select driver names from a list", then click "next".
    Select all drivers that are NOT provided by Microsoft, and then click "Next".
    On the next page, select "Finish".
    Restart the system and wait as he crashed to blue screen.
    Continue to use your system normally and if you know what are the causes of the crash, do it several times. The objective here is to get the system crash because Driver Verifier is stressing out the drivers. If it is not planted for you, then let it run for at least 36 hours of continuous operation.
    If you are unable to Windows because it crashes too early, try safe mode.
    If you can't mode without fail, try to use the system from the installation DVD restore to bring the system back to the previous point of restoration that you created.

    Further reading
    http://support.Microsoft.com/kb/244617


    Information check driver driver Windows Vista - Microsoft Search Verifier
    Questions of Verifier within Vista / Windows 7 http://support.microsoft.com..default.aspx?+verifier1&res=20
    Pilot feature pool http://support.microsoft.com/kb/188831

  • Having intermittent BSOD crash

    Having intermittent BSOD crash.

    Hello community, I had intermittent crash or BSOD problems for about six months now.

    I know: cannot reproduce the crash at will. Seems to be intermittent without real reason. System can work several hours or even days without any problem. Then I can have several accidents within minutes of each other. I installed Windows office in 2013, the situation went from bad to worse, extremely. Of course, I ran system restore to get rid of this problem.

    Efforts in case of problem: I ran mem 86 tests overnight, (note I have 64-bit system then of course to test everything I was with 64-bit programs). I tried stress tests CPU, with testers of Intel. I removed my FI creative sound card and went with the on-board audio device. I started from scratch with a new install of Win 7 Ultimate OS, not only an upgrade. I have a great cooling and have checked system time, fans, power output etc. Does not overheat as I can see. Device Manager is clean and not yellow bangs or ratings. None of the above test produced errors.

    System Stats:

    Name of the operating system Microsoft Windows 7 Ultimate

    Version 6.1.7601 Service Pack 1 Build 7601

    Another Description of 64-bit operating system

    Manufacturer of operating system Microsoft Corporation

    Name of the system

    System manufacturer Gigabyte Technology Co., Ltd.

    X58A-UD3R system model

    System Type x 64-based PC

    Processor Intel Core i7 950 @ 3.07 GHz 3060 Mhz, 4 Lossnay, 8 logical processors

    BIOS Version/Date award Software International, Inc. FF, 18/02/2011

    SMBIOS Version 2.4

    Windows directory C:\Windows

    System directory C:\Windows\system32

    Boot Device \Device\HarddiskVolume1

    The local United States

    Hardware Abstraction Layer Version = "6.1.7601.17514".

    Username

    The Rocky area times time

    Physical memory (RAM) installed 6,00 GB

    6,00 GB total physical memory

    4.11 GB available physical memory

    12.0 GB total virtual memory

    9.91 GB available virtual memory

    Page file space 6,00 GB

    Paging file C:\pagefile.sys

    Most of the mini dump errors is associated with ntoskrnl.exe

    ==================================================

    Dump file: 112913-26379 - 01.dmp

    Crash time: 29/11/2013-21:31:54

    Bug Check String:

    Bug check code: 0 x 00000101

    Parameter 1: 00000000'00000019

    Parameter 2: 00000000'00000000

    Parameter 3: fffff880'03313180

    Parameter 4: 00000000'00000006

    Caused by the pilot: volmgr.sys

    Caused by the address: volmgr.sys + 14d0

    Description of the file: the Volume Manager driver

    Product name: Microsoft® Windows® Operating System

    Company: Microsoft Corporation

    File version: 6.1.7601.17514 (win7sp1_rtm.101119 - 1850)

    CPU: x 64

    Plant address: ntoskrnl.exe + 75bc0

    Stack address 1:

    The stack address 2:

    Address 3 the battery:

    Computer name:

    Full path: C:\Windows\MiniDump\112913-26379-01.dmp

    Number of processors: 8

    Main version: 15

    Minor Version: 7601

    Size of the dump file: 291 032

    Dump of file time: 29/11/2013-21:33:41

    ==================================================

    Please let me know what other information you need to help me solve this problem.
    Thank you.

    Are you sure you have the correct and up-to-date chipset drivers? Do you run VM and if if you have noticed a relationship between them and the system crashes? I can't think of it as anything other than a driver problem. The only reason why VM I'm raising is that some parameters may cause blockages of the seemingly random system especially when it comes to virtualization settings from intel or activate USB 3.0 in a virtual environment.

  • Lightroom crashes on Windows 10 always!

    Bitte Hilfe

    Warum more LR unter dem Neuen Windows 10 immer ab

    Hi heinzb,

    When exactly it crashes?

    What version of Lightroom do you use?

    CC of Lightroom and Windows 10 - constant develop crash | Community customer Photoshop family

    Kind regards

    Assani

  • TCrdMain crashes in Windows 8

    TCrdMain crashes in Windows 8, any suggestions?

    Hello

    TCrdMain.exe belongs to the Toshiba Flash Cards Support utility.

    Reinstall this tool of Toshiba or deleted from the system to avoid new blockages of the system

  • HP Photosmart C5100: hp c5100 grave Solution Center crashes after windows kb3132372 10 update

    Solution Center crashes after Windows update KB3132372 10 (December 29, 2015).

    The Windows Device Manager shows not installed printer as on a regular basis.

    Printer will print but scanning is very heavy and the ink levels will not appear.

    Uninstall and reinstall will not work.  Software will work properly only if Windows update is uninstalled.

    Is there another solution for this?

    Hello

    Microsoft has since released a new update for this problem.

    Fix solution:

    Please download and install the following update KB3133431 from Microsoft:

    https://support.Microsoft.com/en-us/KB/3133431

    Note This update is available through Windows Update only. (Updates )  must be lit)

    1. Click the Start button, select 'Settings' and select 'Making day & security'
    2. Under "Windows Update", select "Advanced Options".
    3. Under "Choose how updates are installed," select "automatic (recommended) in the drop-down list in the menu drop-down."

    Hope that helps.

    Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement

  • computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how do

    computer crashed, have windows vista, indented leave, all the documents lost, can I get all the files, how to do it, in simple terms,

    Thank you.

    If by "computer of new beginning" you mean that you have started your recovery or disk restore factory set and reinstalled Windows, then the ability to recover your files is practically zero.  You can try a utility like Recuva (http://www.piriform.com/recuva) but since you have rewritten the entire hard drive, it is highly unlikely that anything will be recoverable.

  • A BSOD after loading Windows and before logon

    Hello

    I have a problem with my PC:

    The BSOD happens on the screen to login before I can enter my user name or password. of course the strong BSODS happened so windows worked.

    Please help me

    Here's my dump files:

    http://1drv.Ms/1QMLlC9

    Thank you

    Several questions

    First you need to update these drivers from 2005

    RecAgent.sys 10/05/2005 12:28:17
    wdcsam.sys 16/04/2008 03:27:02
    Apowersoft_AudioDevice.sys 18/11/2008
    L1C62x86.sys 2009-04-01 12:07:46 AM

    This accident was related to a COMODO Firewall Pro Sandbox Driver cmdguard.sys.  I would remove it years use MSE in its place

    http://forums.Comodo.com/help-for-v2/how-to-uninstall-Comodo-Firewall-t1184.0.html

    http://www.Microsoft.com/security_essentials/

  • Explorer.exe repeatedly crashes in Windows 7 RC

    The Explorer repeatedly crashes in Windows 7 RC.  While browsing through the files and you want to remove some of the video library & hangs with the similar error msg.

    The failing application name: Explorer.EXE, version: 6.1.7100.0, time stamp: 0x49ee918d
    The failed module name: ntdll.dll, version: 6.1.7100.0, time stamp: 0x49eea66e
    Exception code: 0xc0000005
    Offset: 0x0006876f
    ID of the process failed: 0 x 1204
    Start time of application vulnerabilities: 0x01ca50d7df3044d6

    Says that c:\windows\explorer.exe is the problem.

    Thank you
    JP

    I suspect a corrupted system file. SFC could fix that. Reset Internet Explorer can help. At worst, I think you can fix it with a relocation, or "inplace upgrade" Win 7 from the installation DVD.

    To determine if the problem you are experiencing is caused by one or more system files that are used by Windows, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

    To run the System File Checker tool, follow these steps:

    1. click Startand type cmd in the box start the search .

    2 right-click cmd in the programs list and then click run as administrator.

    3. If you are prompted for an administrator password or a confirmation, type your password or click continue

    4. at the command prompt, type the following line and press ENTER: sfc/scannow

    When the analysis is complete, test to see if the problem you are experiencing is resolved.


    Internet Explorer resets
    Solve this problem
    Microsoft Fix it 50195

    Messages rating helps other users

    Mark L. Ferguson MS - MVP

  • Windows Explorer crashes on Windows 7 Home Basic.

    Windows Explorer crashes on Windows 7 Home Basic. System and the laptop for 1 1/2 years. I did a clean boot, I disabled the shells. I find no virus or registry problems. None of these things do not work. If I click on documents, then any file internal, it crashes, which blocks my office and my key to start. The task manager can hang after that, by ending the program more difficult.

    If I try to access all files, if I stay with the Chrome or the start menu, things are usually very good. No grip. But if I try my library of Documents, photos, or documents, it will ' does not ' on me. I am now at a loss. Help?

    I think, THINK, I could have fixed by my C: drive of error checking.

    Again, it could come back (I read the problem some people have it again), but for now it seems OK...

  • How should I do to repairin apps that crashed on windows 7?

    1. How can I remove all error messages & fix my systems apps crashed on windows 7?

    If you have a backup to restore it before problems

    If you run a repair of the win 7 dvd installation.

    If you do not have the win 7 dvd, allows the factory restore if your computer has the option

    Re-install windows.  By far the best option.

  • Get random BSOD crashes

    Hello.

    Recently I have beed getting random BSOD crashes and pc freezes.

    System specs are

    Motherboard: Asus A4M87TD/USB3

    CPU: Phenom II X 4 965 BE

    GPU: Gigabyte Radeon R9 270 X 2 GB

    RAM: Corsair Vengace 8 GB (2x4gb) 1600 CL9

    PSU: 500W

    I ran tests:

    Memtest: 2 pieces of RAM moved together, between banks for 12 hours - no error

    Memter: one piece of ram at a time in 4 different banks each for 7 hours - no error

    Stability test OCCT for 3 hours - no crash

    Prime95 test 1 hour - no crash

    GPU has beed tested in another PC and works without any problem

    Accidents seem random.

    PC can get a bsod while using an internet browser (opera and IE also) or during a game (Battlefield 4, Battlefield 3, games, F2P, Eveonline etc.).

    The system is clean installed yesterday with driveres up-to-date.

    Used Whocashed to try to locate the troublemaker of disorders, but without result.

    Hers the link to 3 the most recent dump files

    https://onedrive.live.com/redir?RESID=DFB27DBEF4C25712! 1813 & authkey =! ABusdbioU9G1Vvs&ithint=file%2c.zip

    Any help would be appreciated.

    There is certainly no problem of software here, I'll tell you that much. This very much looks like failing RAM currently, or the motherboard as you said.

    How do you use your RAM via the BIOS? I * do * it passes Memtest, but it can still be misconfigured. I reset the CMOS for testing purposes and leave everything to default settings, not to touch even the DRAM timings. Leave for what she restores.

    Kind regards

    Patrick

  • Crashes in Windows 8 Pro. !!

    After the upgrade to windows 7 to windows 8 pro. I get a few crashes, not common however. But it worries me. I have analyzed files of dump with the software "that crashed", but does not include a lot. Help, please!

    Crash dump directory: C:\Windows\Minidump

    Dumps are enabled on your computer.

    Sunday, August 4, 2013 16:58:24 GMT crashed your computer
    crash dump file: C:\Windows\Minidump\040913-34468-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
    Bugcheck code: 0x9F (0x3, 0xFFFFFA8006D1EAC0, 0xFFFFF8026D4DF7E0, 0xFFFFFA800AD70590)
    Error: DRIVER_POWER_STATE_FAILURE
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Sunday, August 4, 2013 16:58:24 GMT crashed your computer
    crash dump file: C:\Windows\memory.dmp
    This was probably caused by the following module: ntkrnlmp.exe (nt! KeBugCheckEx + 0x0)
    Bugcheck code: 0x9F (0x3, 0xFFFFFA8006D1EAC0, 0xFFFFF8026D4DF7E0, 0xFFFFFA800AD70590)
    Error: DRIVER_POWER_STATE_FAILURE
    Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    Monday, March 4, 2013 18:45:59 GMT crashed your computer
    crash dump file: C:\Windows\Minidump\040413-15484-01.dmp
    This was probably caused by the following module: ntoskrnl.exe (nt + 0x7A040)
    Bugcheck code: 0x9F (0x3, 0xFFFFFA8006C708F0, 0xFFFFF8800325B7E0, 0xFFFFFA800AD379F0)
    Error: DRIVER_POWER_STATE_FAILURE
    file path: C:\Windows\system32\ntoskrnl.exe
    product: Microsoft® Windows® Operating System
    company: Microsoft Corporation
    Description: NT Kernel System &
    Bug control description: this bug check indicates that the driver is in an inconsistent or invalid power state.
    This seems to be a typical software driver bug and is not likely to be caused by a hardware problem.
    The accident took place in the Windows kernel. Maybe this problem is caused by another driver who cannot be identified at this time.

    An occasional blue screen error should not have any long-term effect.

    If all goes well a compatible driver Windows 8 will be provided in the future.

    Another thing I might suggest is to update to the latest version of Kaspersky and see if it helps one.

    Or uninstall Kaspersky and go with firewall and antivirus integrated Windows 8 (Windows Defender).

    Temporarily uninstall Internet Download Manager and see if that makes a difference.

    The Kaspersky IDM pilots and were involved in the blue screen crashes in Windows 8.

  • I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

    I had CS5 on a computer that has crashed with WIndows 7. How to restore my CS5 with the backup files?

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • Not sure how to display all the applications that I'm supposed to have with the creative cloud - constant spin in the window? [was: creative cloud]

    Trying to download my creative cloud, but get a constant rotation in the window. Not sure how to display all the applications that I'm supposed to have with the creative cloud?

    Please visit: App does not open. Wheel of progress turn continuously

    I hope this helps.

    Concerning

    Megha Rawat

Maybe you are looking for