Constant Paper Jam session with HP PSC 2355

I am using Vista with a printer HP PSC 2355.  Sheet of paper passes to halfway through, then stops.  "Paper jam" message.  Cleared jam and OK pressed to continue.  Next sheet of paper does exactly the same thing.  Printer on and off, same problem.  Printer has left during the night, same problem.  I tried the program MS FixIt, no error found.  Nothing is ever printed on documents.  Help please.  Magic lure.

The game, July 29, 2010 20:44:20 + 0000, magic lure wrote:

Thanks for your help.  I contacted global printers that HP laser printers service and had a chance to talk with someone who is used to working on HP home printers.  He suggested that I be follow paper supply channel and look for any kind of sensor that would leave the printer to know that the book has arrived at the location suitable for printing, or go and buy a new printer.  After about 10 minutes of searching, I found a small piece of plastic broken off the coast up close to the rolls of paper.  Nearby was a spring lever that controlled a gear.  The upper part of the lever was broken.  Both put in correspondence with the breaking point.  When the lever was a thing, if it was another.  I finally found a way to get the two pieces together and then taken apart, added instant glue and put back them together again.  It worked once then broke off the coast again because it was not sitting correctly together.  I have two choices: try with a different type of glue, or go and buy a new printer.   Thank you again for
your help.

My guess is that you don't succeed him if you do that again, fixing or
that even if you do not succeed, it will not last very long.

On the other hand, there is no downside to try again before giving
to the top and buy a new printer. It's worth a try.

Ken Blake

Tags: Windows

Similar Questions

  • Constant "paper jam" when you try to print photos

    Hi all

    I get constant "paper jam" error when you try to print photos on HP Premium Plus photo papers. I use 13 x 18 cm and A4 documents. I gave up a single sheet of A4 paper and printed the printer self-test report and it shuts everything OK.

    I already followed the instructions of rolls to power clean paper, but without effect (for example http://support.hp.com/us-en/document/c01123477

    I'm about to give up and look for service but the strange thing is that jams only when I try to print photos (for example from Lightroom) but is allowed when copies of documents or printing self-test report.

    Any advice here?

    Thank you

    Adam

    Hi MissTeriLynn,

    Troubleshooting instructions made me pick up the problem with Lightroom. I came across a statement "some other Adobe software users have reported conflicts with HP printers. They tend to have long names and a simple change of name of the printer, for example to something like desktop printer or MYPRINTER seems to work"(here).

    And guess what. It resolved my problem as well. I have configure most of the options of printed model but the printing again.

    Thank you very much for the support provided!

    See you soon,.

    Adam

  • M277dw MFP: MFP M277dw Constant paper jam tray

    We had our M277dw MFP for less than a year and know almost constant paper jam tray.  Looks like there is a problem with a roller, and when he finally makes contact, she folds the paper a bit and jams. We are then asked to add paper, then we remove the stuck piece and then he said: 'cleaning up' for jams a little and again. We tried different papers and nothing seems to help. Y at - it a setting that we can do? Thank you!

    Please try to clean the rollers in Tray 1 and 2. Also, just remove all the papers and set the paper on the tray guides.

  • Paper jams periodically with the HP1536 MFP dnf during the feeding process while in scan mode

    Someone has advise for us all by using the HP1536.    We have paper jams periodically during the process of feeding in scan mode.

    We use this machine for a 1 year without feeling the pain.

    There are a few things I would check if the printer is having recurring paper jams.

    * Make sure the paper is a paper clean and crisp

    Take all the paper in the input tray and use a flashlight to look into the status bar.  Make sure that he took not in rolls of paper entry.

    * Check the printer rear access door to check that there is no small piece of paper stuck in the rollers from the back.

    Thus, there is a document with the steps to solve the problems of paper jam.  The document can be accessed here.  Let me know how it goes.

  • Scanning with HP PSC 2355 all in one printer/scanner/copier.

    In XP, the software enabled mutiple scans (in pdf format) to a single file. Is there an option in windows 7 to do scans of mutiple in the options of the printer?  Is there a way to get an output of pdf file?

    You want to scan multiple pages into a pdf file?  The 3rd party below program works with most scanners.  It sells for $ 29.95.  You can download a free 30 trial to try out it if you wish.  (I looked for a program free and tried a bit, but none were any good.)

    Scan to PDF
    http://www.softi.co.UK/
    --

    "Bobbudden" wrote in the new message: * e-mail address is removed from the privacy... *

    In XP, the software enabled mutiple scans (in pdf format) to a single file. Is there an option in windows 7 to do scans of mutiple in the options of the printer?  Is there a way to get an output of pdf file?

  • OfficeJet Pro 6230: Officejet Pro 6230 continous (not of paper) paper jam error

    As soon as the printer powers on it the ink carrier Wizz backward real quick (as he struggles to move) and then gives me a paper jam error (the resume light flashes and error appears on my screen). He did the same thing when I try to print anything (including the status report page).

    When I up the access panel upward (power on), the carrier of ink isn't even move to ink cartridges which can be changed. I try to move with force, but it does not move (if I use more strength, somethings will break). Ink is a bit new, so I don't know it still has ink in there.

    The steps I've tried:

    plugged the power supply into the wall outlet

    roller cleaning

    THERE IS NO PAPER or PAPER PIECES BETWEEN ROLLERS (I checked like 20 times)

    reset the printer

    There is a large black gear coupled to a white average speed on the left side near the bottom of the printer. I manually drove the speed by pressing (rotation) of North (or forward or to the rear of the printer) for a few seconds and once I did that. the ink carrier was able to move as it's supposed to, and I could see the ink. but once the power is back on, the carrier of ink was in the locked position and fights again and gives me the paper jam error.

    I don't have really any troubleshooting documents on the CV online on how to fix a jammed media of ink and clearing paper jams, so I'm out of options.

    It is plugged into USB

    The main problem is the paper jam error.

    I don't know if the stuck carrier of ink is the cause.

    Hi @Comp-Tech.

    Thank you for joining the HP Forums!

    I noticed your post that your printer HP Officejet pro 6230 receives a constant paper jam error. I'm happy to help you!

    Since you did all the steps already to troubleshooting in this guide, A 'transport Jam' Error Messageand this guide, "Problem of tray or paper jam" Error Message appears, as well as the reset of the printer. The next step is to fix the printer / or replaced.

    Please Contact HP phone support for assistance. (After you fill out the information, you will receive a phone number.) If you do not live in the United States / Canada region, please click the link below to get help from your region number. Language-country selector.

    If you are unable to reach a resolution, please click on accept solution. If you appreciate my help, please click on the thumbs up icon. The two icons are below this post.

    Best regards!

  • HP Officejet Pro 8600 Plus: paper jams false

    I'm frustrated that I can't fix a paper jam called... HP says clean the pickup roller and all other... all that, changed paper too.

    There is no paper jam, and sometimes it works a few Goes After that ' Pick engine fail!  Then the constant paper jam.   Uggh!  The paper path is clean and clear

    I tried reset hard and load the latest firmware (update)... not so good.

    I saw a fix "in private" messages... It worked fine 2 days ago!

    Help someone?

    Hello @StEdsNut,

    Welcome to the Forums of HP Support!

    I understand that you are having problems of 'stall engine Pick' when printing your HP Officejet Pro 8600 more e-all-in-one printer. I would like to help you today with this problem to feed paper. Thank you for all the troubleshooting steps that you received before you reach out for support.

    To begin, please can I you click here for the suggested troubleshooting steps. I realize that you have tried most of these steps. Please, just review the Solutions proposed to ensure that no action is missed when you completed your troubleshooting. If you missed a step, please complete this step before you begin.

    If the problem persists, please check your Private Messages. I send you a private Message with instructions on how to perform the Programming Reset full semi.

    Please post the output of your troubleshooting in this thread. I can't wait to hear strings attached good luck!

  • HP Photosmart Prem c310 series: Photosmart Prem C310 paper jam when there is no paper anywhere. How to fix?

    Network & wireless problem fixed.  Printer now say paper jam. no paper anywhere out of cartridges, only checked everything with a flashlight.  No paper parts anywhere. How to fix?

    Hi @Grammy4,

    Welcome to the HP Forums!

    I understand that you have found a paper jam error with your HP Photosmart printer c310. I'm happy to help you!

    I recommend going through this guide to paper jam, a "paper jam" message for HP Photosmart Premium e-all-in-one printer series (C310), as it's good for true or false paper jams!

    I hope this helps!

  • PSC 1315 all-in-one: paper jam

    My wife was going to print something from our computer and the printer took several leaves inside. It jammed so she shot just leaves in the front now, our computer said there is a paper jam and will not print we. I went through all the steps of the Glade, restarting, etc. that I've read in hp and others who shared their problems. It copies and analyzes very well. The computer tells me that there is a jam. Could have broke us something by pulling the paper to the front?

    Thank you

    Oldfud

    Hi @oldfud

    Welcome to the Forums of HP's Support. I understand your computer continues to tell you that there is a paper jam. I would like to help.

    It is possible that something has been damaged. Although it could be a "hiccup" with the software on the computer. You can try running the HP Print and Scan Doctor. This will check the software. If the problem persists, try this document a view of the "Paper jam" error HP PSC 1315, 1315v, 1315xi, s and 1318 1315 all-in - One Printer Series.

    If you have any questions, or if this does not resolve the problem, let me know.
    If it solves your problem, please click acceptable Solution. This will allow other people with the same problem the solution easily. If you want to say thank you, feel free to click on the laurels.

  • I have a hp lj4 paper jam problem. How can I chat with an expert today?

    The printer lj4 passes the self-test.

    The printer merges the front page that the message of paper jam.

    The paper is not wrinkles just stops.

    She does it with a number of different toner cartrages.

    The printer had only light home use.

    I suppose it may be a mechanical or electrical sensor problem

    Is there a service manual for this printer showing sensors and

    mechanical training courses?

    Hi wsinger,

    I suggest you find a service center to help you remove the output assembly. This requires you to remove all the covers and withdrawal of all carefully don't not to damage other internal parts. You might be able to buy the exit assemble from the link I provided earlier, but I don't think that you will be able to replace just the belt. Let me know what you find?

    Have you considered upgrading to a new printer laserjet?

    Course Laserjet printers

  • PSC 1600 all-in-one does not print because of false paper jam

    The printer will print not a WORD doc due to a false paper jam.  It will print a scanned doc that proves that there is no paper jam. The document remains in Quebec, and when I click on the printer icon, and open the folder it says "paper jam".   How can I get the printer to recognize that there is no paper jam?  Operating system is VISTA.

    Try to uninstall and reinstall your software. Before you do, try to restart your computer and try again to print.

  • HP Deskjet 3050: Printer saying paper jam, do not connect with wheel machine

    My printer says paper jam, but no paper jam. Or say I ran out of paper. This is not true.

    Makes funny noise as it tries to feed the paper through. Only 2 cm of paper in the machine. When I remove the paper he has 3 points as it cannot connect to wheel inside the printer and is folded around. I hope I can fix it because I don't want to pay for a new printer! Thanks for help.

    I have a vague feeling that there is something inside the printer that is not there @wen41.

    I'd love to help you find a solution. Please watch the following video and perform the suggested solutions to clean and inspect the printer;

  • 8500: 8500 with clear paper jam message

    Hello

    My gives me a clear paper jam message when printing from the nearest mac to the printer.  I walked through all the steps on the 14-minute video, and I always get the message (that) then it will print.

    In addition, 3 other computers that use this printer (all macs) can print without problem. We're using Yosemite and the other two use a slightly older OS. This could be a driver problem?

    All thoughts are welcome.

    Thank you!

    I turned the printer works after doing the above and guess what? It works!

    Thank you!

  • Need help with CP1215 false paper jam issues! Using Windows XP

    I have a HP Color Laserjet CP1215.  Whenever I try to send a print job to the printer, I get a paper jam message.  I go through the paper jam, clearing routine, but there is no paper stuck. HELPPPPP!

    Hi mrben,.

    Follow the steps outlined in the document below and let me know what you find?

    Out of paper"Error Message is displayed and the printer does not look upward or feeding the paper

  • OfficeJet Pro 8630: ink cariage jam and non-existent paper jam

    My printer is a little more than a month and the print head had to be replaced on the first day and was able to print 1800 pages with no problems and now a month or so later she constant ink cariage jam and no paper jams and past every 5 to 30 pages. Also tried each end help on hp.com support page

    Hi @michael6582,

    Thanks for trying!

    The printer must still be guaranteed if it is about a month. These printers come with a one year warranty.

    There may be a problem with the printer hardware. I suggest you contact HP Support by phone they may have addition resources that could help lead to a resolution.

    What you can do, is to use the following link to create yourself a file number, then call and it can help to expedite the appeal process:

    Step 1. Open the link: www.hp.com/contacthp/

    Step 2. Enter the product number or select Auto detection

    Step 3. Scroll up to "still need help? Fill out the form to select your contact options.

    Step 4. Scroll down and click on: contact HP options - click Get phone number

    File number and phone number are displayed.

    If this helps you find a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

    Thank you!

Maybe you are looking for

  • Apple Watch and health kit synchronization

    I have a question about the Apple Watch and the integration of health kit.   I searched and found a little info, but would like some clarification.   I've got a grant of Q of fossils.  It syncs health kit and measures steps etc. through its applicati

  • No sms no sound when its waiting for phone

    Hello, if my phone is in standby, I didn't have sms sound also not whatsapp... the screen also does. If the phone unlockt then everything works very well for me all the settings are fine I think

  • Satellite P100-219: LAN driver

    There is a problem with the "Network Driver" on the CD utilities & tools created from the HARD disk.Installation fails, probably due to an error of order, '' C:\Toshiba' is not recognized. In the folder Driver network, there are two subfolders:100LAN

  • RN104 - added 4 new 4 TB drives. 2.5 days of resynchronization. Start copying files, or wait until it's done?

    I think I've drunk mostly in the title... I just added four new 4TB discs (WD40EFRX) to a vacuum RN104 running the latest operating system. (6.4.0) At the start, he started a resynchronization estimated at about 70 hours. Is a resynchronization requi

  • Object ValueMaxCount Datafinder

    Hi all I want to limit the number of results. 'oMyDataFinder.ValueMaxCount = 50' does not work in this combination. the number of results is allways 200 (as default). Where is my mistake? Dim oMyDataFinder, oMyQuery, MyDate, MyMin, oMyResultsSet oMyD