Constant pop up of the notice that says "USB device not recognized" after the device has been disconnected

Trying to connect a Sony W760 to PC Suite and receive the notification as the "peripheral USB is not recognized. Clicked on the indications of alert and monitoring. The device is not installed. Computer restarted, but the alert keeps popping up every 10 to 15 seconds. How to stop?

Found the answer to the problems by accident. I had turned off my Avast, during the installation of the programs, but did not know that the computer came with Norton already active. Nothing on the screen noted that it is there. The Sony site, under the heading troubleshooting USB and I saw it mentioned to disable McAfee. Became curious and went to control panel > programs and features looking around and found the Norton. Uninstalled, downloaded programs from Sony, install and everything works fine. Just a reminder, check all your security system before installing programs.

Tags: Windows

Similar Questions

  • Updated Firefox to update automatically so that the internet has been disconnected, and now it's showing I updated Firefox. What should I do?

    I started Firefox even if the internet has been disconnected. But before opening, Firefox updated automatically, not advising me that I was disconnected. It shows now that I have the newest version of Firefox. What should I do?
    Operating system: Windows XP Professional Service Pack 2.

    He's going to have downloaded the update while you were connected and the next time you start Firefox, it will have installed upgrading if you were connected or not.

  • HEX 0x8BBB0011 as the connection to the server has been disconnected

    Hello

    I use a shared variable of the network to control a loop in FPGA in cRIO 9073. 1 for a month, the program was runing without any problem, but suddenly, the VI is thrwoing an error

    "HEX 0x8BBB0011 connection to the server has been disconnected.

    The error or warning occureed while writing the following shared variable

    \\NW-cRio\NW Library\NW_Force_cal

    \\169.254.106.130\NW Library\NW_Force_cal ".

    A screenshot of VI is fixed, the NW_Force_cal is highlighted.

    After the VI has been shut down and restart the VI took over running without problems. This kind of unpredictable behavior is very difficult to manage, I lost data in real time during 12 hours of recording because of this problem.

    Please suggest a solution for this problem.

    Thank you

    Guilhem

    The error has explained the issue.  The network had problems that led to the server being offline.  How to solve this problem is to understand what is meant by "real time".  It's just another way to describe a deterministic calculation.  In other words, the program ensures that everything will happen within a predetermined period.  Order things to be deterministic, they must be controllable.  The most obvious way to break the determinism is to prompt the user for entry.  As we cannot guarantee clearly not the user will respond within a given period, can no longer call the deterministic program.  In this case, we have a more subtle break of determinism.  Relying only on a network will break determinism.  It is not simply a way to ensure that the network is not getting hit harder than usual.  In this case, the network was down for a period of time long enough to raise an error.

    Here's where we get to fix things.  Once the error has been generated, the code to do with it?  The wire of the error is not used for anything else.  I expect to raise an error and stop the program.  Clearly this isn't the desired behavior.  So, why we do not use the wire for an error handling?  In case of error, you can connect the data locally.  When you cover the network, you can clear the log to the host PC that you usually use to collect your data.  This command removes the dependency of your network for the code works.  With the help of a more robust code solves the problem with the relatively easy error management.  Unfortunately, there is absolutely nothing anyone here can do to ensure your network never loses connectivity.

  • Unable to connect to the Internet using Auntie Photon, it shows the device has been disconnected or is not available when clicking on the button connect

    Original title: Auntie Photon

    Hi all

    I use Auntie Photon on windows platform 8, and it shows the device has been disconnected or is not available when clicking on the button connect. For this reason, I am not able to use internet on my Laptop.I also in contact with the customer service and they told me to take the laptop to any engineer to solve this problem.

    Help, please.

    Hi Varun,

    Thanks for posting on Microsoft Community. I understand that you are not able to connect to the Internet using the dongle Auntie Photon. Let us work together as a team and try to get this fixed number.

    Please help me with the following information related to this issue:

    1. You have installed the required software on your computer which came with Auntie Photon?
    2. Do you see an error or exclamation point in Device Manager when you connect Auntie Photon dongle? See the steps to check:
    • Press Windows Key + X.
    • Select Device Manager.
    • Check if there is no error or exclamation point under Auntie Photon.

    This problem can occur if device drivers are not get detected or due to missing/corrupt device drivers.

    Please follow the steps mentioned below:

    Method 1: Run the hardware troubleshooter

    The convenience store is an automated tool that checks the hardware attached to the computer for known problems and provides details on how to correct them. Follow these steps to run the troubleshooter.

    1. Press Windows key + W on the keyboard.
    2. Type the Troubleshooting in the search bar and press Enter.
    3. In the Troubleshooting window, click show all in the left pane.
    4. Click hardware and devices.
    5. Click right on material and devices and and select run as administrator.
    6. Click Next and follow the on-screen instructions to complete the process troubleshooting.

    If the troubleshooter could not find and fix the problem, I would suggest trying the following method and check.

    Method 2:

    Note: Make sure that the Auntie Photon dongle is plugged.

    Step 1: You can try to uninstall and reinstall the drivers of Auntie Photon and check. Follow these steps:

    1. Press Windows key + X on the screen.
    2. Select Device Manager.
    3. Expand the network adapter and right click on driver and select Uninstall.
    4. Restart the computer.
    5. Windows will automatically load the drivers.

    Step 2:

    You can also try to launch the Windows updates and install all the updates that are available including the driver in option and the updates of the firmware.

    Windows Update: frequently asked Questions

    You can also get in touch with Auntie Support and check the updates to driver for Windows 8.

    Please answer us on the State of the question to help you further.

  • The session has been disconnected

    Hi all

    I'm building one laboratory view 5.2 in my office... Because this is a laboratory environment, I could not use router company (I'm not the router admin), so I put an another Juniper 5GT as audit router...

    then I put 2 servers esxi 5.1 and 5.2 venter/view

    then I clone an ent as view desktop VM win7... then I use my ipad to connect to the server and then connect it this VM Win7... I received a message below

    "Desktop load attention".

    Your desktop is loading too slowly. You may need to activate your VPN to connect.

    Click on 'OK' " "

    then he continues to run... and I also check the Web Client to view events... I see that the user account has log on to view & this VM Win7...

    After customer view fill the bar running, it shows


    "The Session has been disconnected.

    Lost connection to server. "

    value this juniper IP route default of the machine I need?

    Thank you!!

    wyldkao

    Almost certainly a problem of remote access configuration PCoIP. Just follow the 3 steps here setting up remote access with a view PCoIP 4.6 and newer , and it'll work.

    If you still can not configure it correctly, watch the video that goes through him more in detail.

    Let us know what it was.

    Mark

  • the device has been disconnected or is not available

    I can detect the modem Huawei E173 usb and install following the instructions, but when I try to connect, watch the device has been disconnected or is not available.

    Help, please!

    Currently, my version of the MacBook has been OS X 1 10.11.4

    its MacBook Pro OS X 10.11.4

  • USB-6009 not recognized after the blue screen of death

    I have two devices USB-6009, used with NOR-DAQmx and Labview to make some analogue simple analogue input and output.  The USB box - two 6009 were previously works very well on this PC.  Recently, I got a blue screen of death, associated with a different USB device to (non - OR) connected to the PC.  I not save the information of the blue screen of death.  When I restarted the computer, the USB-6009 devices were no longer recognized by Labview / MAX.  The Green LED on the USB - 6009 s do not come.  The USB - 6009 s appear in the Device Manager of Windows with a yellow exclamation point ("Windows cannot load the driver for this hardware device").  If I connect the USB-6009 case to another PC, MAX recognizes them on this PC, and I get the usual flashing green LED.  If I connect another USB-6009 (never connected to this PC), I get a green LED solid, and, says Windows cannot load the driver.

    I am running Vista, Labview 8.5 and NOR-DAQmx 8.9.  I rebooted 5 - 6 times, I tried disabling and the reactivation of the USB-6009 by windows Device Manager, I tried the options "update driver" in Device Manager.  Any advice on how else to solve it?  Thank you!

    The driver update and turn do nothing to the main driver - DAQmx. Reinstall or repair that.

  • during the installation of Vista Service Pack 2, the computor has been disconnected. Now, I don't have an operating system and startup repair does not work. What should I do now?

    Computor was disconnected during the installation of Vista Service Pack 2. I did now no operating system and startup repair does not work. What should I do now?

    You may have to reinstall Vista from the original media or from the recovery partition according to the type of computer you have.

    Hope that you made the backup recommended all of your data before attempting to install Vista SP2.

  • Cannot get the notification if the client has been disconnected and then become online

    Hello

    I use notification service Pap BB and I have send a notification to the customer of BB and he got the notification correctly while it is online.

    But if I send a notification, while the mobile was disconnected , then again online , no notification received.

    Please notify

    Hello

    Just for future reference, try to avoid putting your device PIN, appid, password, and the full URL of PPG in your post on the forum.

    From your sample code, it seems like you were missing the initial "cp" right after https:// and before your content provider ID.

    The publicPPGAddress must be of the following form:

    https://CP {cpid}.pushapi.eval.blackberry.com/mss/PD_pushRequest where {CPID} is replaced with your content provider ID

    Let me know if this helps.

    Thank you

    Matt

  • When a pop-up message indicates that a storage device has just been attached and I don't put a USB storage device into the computer at all, what that means?

    From time to time, (isn't that every now and then, not every day or every week) a message appears on the computer screen to notify that "a storage device has been attached... and something or other on a port '-as it would if a new hardware device had just been installed or removed... only, I have not attached at a storage device.

    In fact, apart from the scanner, printer and keyboard connected, which are already inserted until the computer is turned on, no USB storage device or any other thing seized or inserted into the computer when this message is displayed on the lower right screen where the icons on the desktop are,

    Why would this happen unless I had personally inserted/joint a USB stick storage device myself in my computer?

    I'm afraid that maybe someone to access details and store information from a remote location via a storage device? Is this possible?

    And if it's an error of some sort, how to fix this problem?

    Please notify. Thank you.

    This probably means you have a bad USB connection somewhere.  I got this a lot when I used markets good USB hubs.  It also happened a lot on a couple of the USB plugs on my old laptop 4 year, where I had plugged in and out things in them so that the connectors are not as strong as they were when new.  My main office more connected devices above that outputs 4 USB, that I had on the back, so I finally bought a card extension to add 4 more exits USB.  If this is your case, perhaps you could do the same.  Expansion cards are not very expensive, usually in the range of $ 15 to $ 25, and they are fairly simple to install.

    I hope this helps.  Good luck.

  • I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

    I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017.  MSFT site was no help. Any recommendations?

    Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

    That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

    Good luck!

    =======================

    Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

    ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • Windows pop up on my screen that says "Please Wait".

    Original title: pop-up windows

    I continually have the 2 inch Windows pop up on my screen that says "Please Wait".  All color sheets and everything stops until it emerges.  What is this and how do I get rid of him?

    Hello

    ·         Do you use the computer laptop or desktop?

    ·         When exactly do you get this message pop up?

    ·         Were there recent changes made on the computer before the show?

    Follow these methods and check if that helps:

    Method 1:

    I suggest you to update the latest drivers for the graphics card on the computer and check if it helps:

    How to manage devices in Windows XP

    Method 2:

    This article is intended to help you use the resolution of the issues of video display that is included in Windows XP Help and Support Center. This article also provides a list of online support services that may help you solve your problem.

    Resources for troubleshooting problems in Windows XP

    http://support.Microsoft.com/kb/307960

    Connect your computer monitor to a spare computer and see if the error 'Please Wait' always appears. If so, it's a problem with the monitor.

  • Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should.

    Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.

    Someone in the building uses Apple can 790-795 network this person hack me and who is?

    Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.

  • I'm having a problem with Windows7 Home Premium and WWII CFS joystick operation. I get a message saying that the controller has been changed. Microsoft offers a patch?

    I have problems with Windows7 Home Premium and WWII CFS joystick operation.  I get a message from gibberish, saying that the controller has been changed.  I tried to replace the file with a version of Windows XP .cfg and also tried to re-write the .cfg file.  Apparently, this version of Windows will not allow a file to be saved with an extension ".cfg", so it does not work either.  Any suggestion would be appreciated.

    Thank you

    Hi Bob,

    You can consult the following links of wire and check if it helps.

    Joystick does not work with the Europe of WWII Combat Flight Simulator series. Help?

    With the help of WW2 Europe Combat Flight Simulator series with Windows 7 Home Premium

    Note: The above links contain third party links. Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  • When I try to read Blu - Ray, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. »

    Original title: Blu - Ray

    My computer can read blu - ray, but when I try to play one, it says "Windows Media Player cannot play the DVD. The disk has been created in a way that does not support the player. "How should I do?

    Hello
     
    The Blu - ray disc format is not supported in Windows Media Player. To play a Blu - ray Disc, you must use a non-Microsoft program that supports playback of Blu ray and a device that can play Blu ray discs.
     
    See the article mentioned below:
     
     
    Read a CD or a DVD in Windows Media Player: http://windows.microsoft.com/en-us/windows7/Play-a-CD-or-DVD-in-Windows-Media-Player
     
    Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

Maybe you are looking for