Contact ID for the iphone 6 no longer works after that I added my fingerprint to my new iPhone 6 s

Similar Questions

• Error in connection for the first time, then it works after that (with the same string)

  I have a problem of connection error strange that a "OracleConnection.ConnectionString is not valid" with my program ASP.net/c#, but when I try the page again once it works after that.
  I create the connection string in the code and then pass it a bit like this:
  
  * private readonly OracleConnection conn = new OracleConnection (oradb); variable in class *.
  
  * / / in the Page_Load method *.
  _oradb = "password =" + oraPassword + ";". " User ID =' + oraUserName + '; Data source = mydb; » « ;" *
  _conn. Open(); *
  
  
  User/login name are also generated and inserted in the connection string and when you debug checked the connection string and it's exactly the same every time. It is as if the connection is interrupted and the first time, it attempts to restore, it gives the error, but then it opens the connection after that and failed again in the same window.
  Any ideas what this might be caused by? I close the connection to another method, after all I want to be the DB and written on the screen.
  
  The web server is IIS, is the version of .NET 3.5 and the library referenced Oracle is Oracle.DataAccess.dll. In addition, the DB version is 10.2.0.4. Don't know if everything what is necessary, but I thought I'd throw out there, just in case.
  
  Edited by: psaleh may 24, 2010 23:37

  When you create here of the OracleConnection object.

  * private readonly OracleConnection conn = new OracleConnection (oradb); variable in class *.

  _oradb might be empty or invalid during the first.

  Instead, try this-

  * private readonly OracleConnection _conn = new OracleConnection(); variable in class *.

  * / / in the Page_Load method *.
  _conn. ConnectionString = "password =" + oraPassword + ";". " User ID =' + oraUserName + '; Data source = mydb; » « ;" *
  _conn. Open(); *

  There is a separate forum for the ODP. NET-
  http://forums.Oracle.com/Forums/Forum.jspa?forumid=146

• My internal microphone no longer works after that was plugged in a mic

  Hey guys!

  I bought the HP Envy 13 spectrum (13-2113TU) earlier, and everything was smooth and functional until yesterday when I plugged it in one of these headphones with the MIC designed for phones in the 3.5 mm plug. For a second, that it did not work, but after that the external microphone worked fine. However, I find that after using the earphone, the internal microphone no longer works on Skype or any where else and it seems there is no way to test whether it is functional or not.

  In the audio Panel, there is only the stereo mix and microphone option external availible under recording devices. I checked the boxes that says see the disabled and disconnected devices but there seems to be no way to activate the interal peak. All audio drivers are up to date and nothing is cut.

  Nobody knows what is happening and what are the steps I could take to solve this problem. Thank you.

  Hi Shabab,

  I understand that your internal microphone no longer works after that a microphone is plugged into your HP Envy 13 of spectrum. If you follow this document on the microphone does not work after a webcam or a microphone USB is installed, it should solve your problem.

  http://support.HP.com/us-en/document/c01926155

  I hope this helps.

  Thank you

• The Panel and the desktop shortcuts no longer work after the virus

  Originla title: shortcuts does not.

  The Panel and the desktop shortcuts no longer work!  I had other users on my computer and maybe a user to a virus?  I can open programs, but must do so by opening a file written by the program (for example, to open a Word file to get term; to open TaxCut to Taxcut) can anyone help?  (Uses can I have XP Home Edition.)  I tried the system recovery, but that has not fixed the problem!

  Hello

  · What is the number and the model of the computer?

  · You have security software installed on the computer?

  · What happens when you try to open the files?

  · You receive an error message or error code?

  1. follow the steps from the link below: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

  2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

• Sleep on the keyboard button no longer works after a remote session with a technician

  original title: sleep function

  button on the keyboard function sleep and sleep in Start menu stopped working after that technical support trying to solve a problem without report with via remote access. How to make the sleep button/function to work?

  Hello

  1. what measures have been taken to solve the problem? What was the problem or question?
  2. what exactly happens when you select sleep start menu option?

  Windows 7 is not going to sleep
  http://support.Microsoft.com/kb/976877 (see bottom of article, which can be useful for vista too)

  Also please see articles below.

  Turn off a computer: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-off-a-computer-frequently-asked-questions
  Why sleep is not available?
  http://Windows.Microsoft.com/en-us/Windows-Vista/why-isn ' t-sleep-available

• Product key for the software is no longer accepted after reinstallation of Vista

  I bought this program for this computer. I'm assuming that I wouldn't have to buy it in case I had to reload the OS. Is there anything I can do to get this product key to work?

  * original title - I used a family Office and Student 2007 program on my computer but I had to reload the OS and now I'm trying to reload the program but it does not accept the product key. Why he does not accept the product key? *

  Hello Frederick Widdowson,.

  Purchased office home and Student 2007 program separately or did it come pre-installed on your computer?
  If it was preinstalled, it was an OEM version and you need to contact the manufacturer of the computer for help.
  You can consult for recovery provided with your computer disks and diskettes for installation of software support.
  If you bought it separately, then did buy you it online or in a retail store?
  If online, check your email to see if you printed or saved information from your product key.

  If you are referring to a product key sticker that is located on your computer, this is the product key for the operating system and
  not for specific products.

  If you still have questions, please let us know.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Copying files for the flash player no longer works

  Windows 7 is no longer will copy the files Flash drive; said the device works correctly, but with copy/paste or drag, message error message "cannot find the removable disk.

  Hi Mike,.

  1. don't you make changes to the computer before the show?

  2. the problem happen on connect the device on another computer?

  3. What is the brand and model of your flash drive and the computer?

  This problem can be caused if the currently loaded USB driver has become corrupt or unstable.

  Method 1:

  Try to connect the flash drive to another USB port and check.

  Method 2:

  Run the fixit from the link:

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/
   
  Method 3:
  Try to install the drivers for the device on the manufacturer's Web site:
  Reference:
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
   
  Method 4:
  Reinstall the USB controllers. This method addresses the steps where the USB driver currently loaded became unstable or corrupted.
  a. click Start, type device in the area Manager Search , and then click Device Manager.

  b. expand Bus USB controllers. Right click on a device, and then click Uninstall. Repeat for each device.

  c. Once complete, restart your computer. Your USB controllers will automatically install.

  Also check the link for more information:

  Tips for solving problems of USB devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-solving-problems-with-USB-devices

  Note: The Article remains valid for Windows 7 also.

   
  Hope this solves the problem. If the problem persists, you can write to us and we will be happy to help you further.

• USB no longer works after that the BIOS flash to ABCN74WW on the new Z70-80

  Hello

  I started with the installation of Windows 7 on my brand new Z70-80 which worked well, worked USB 2.0 ports.

  After flash BIOS to ABCN74WW USB ports do not work any longer. I already tried soft reset BIOS by unplugging the power supply and the battery by pressing the power button for 20 seconds. USB ports are still inaccessible after that, a USB flashes for a moment, mouse LED is lit but no laser and no operation at all. Even when I start any new installation of windows.

  Is it of any known issues with this version of BIOS? Can I cancel the flash BIOS?

  Kind regards

  I do not remember on an option to backup the bios and certainly did not do. In any case, the upgrade from windows to 8.1 solved my problem...

• All USB Ports no longer works after that Windows 7 update error Code 52 Dell Inspiron

  How repairing USB ports when they have all stopped working after updates. Error Code 52 Dell Inspiron 1720. Pilot not signing not recognized.

  You can check the following registry key? :

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

  Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

  If so, what is 'Data' for these names?

• Wireless connection no longer works after that the virus

  First a browser both stopped working for a month or two, and finally Internet worked from my laptop (although it worked all my other devices). Now after trying to fix my internet system works when it is plugged directly, but is no longer detects wireless connections, and the light doesn't light even when I switch 'on' the wireless switch. Help, please! Thank you!
  Mike

  It's a laptop?  With built in the wireless?   Assuming that so-

  Usually the unit must be included in the same device manager if there is a driver problem.   I suggest you check the BIOS.  The wireless is displayed there?  Turned on?
  I suggest that you update the chip set driver and also try to download and install the driver wireless from your computer manufacturer.   We'll see from there.

• the images are no longer appearing after that I created the test server

  Hi, I'm working on a php site. When I import images files appear regularly in the design window and when I saw witg F12. But once I created the Test Server that they no longer appear. No idea why?

  Hi libdaciu,

  Try to remove the first slash to source path. Update the path of the CBC to src = "gimgs/fandick.png"

  Please try this and then let us know.

• Microphone no longer works after that I messed up with properties

  I don't know what, but I changed something with properties and since then my microphone is not recognized by the computer. I plug in there, but his does not work, its office of the company 'Genius' microphone, I also have hp probook 4530 s, I think that he has messed with portable microphone or something, any suggestions?

  I go into properties, default microphones Exchange but its does not work, it's just not there.

  Use System Restore to go back, arrive on the eve of this problem. When do you start AntiVirus and scan for some corrupt files.

  I really hope this helps. :)

• Why is the size of my pdf increasing after that I added text fields?

  I have a simple pdf which, in itself, is 350 KB. But when I add 4 text fields increases the size of 2.8 mb. Why is this and what can do to decrease the size, but keep the fields of fporm for users to type in?

  Thank you

  Arial is not a standard font. It must be embedded in the file so that it can

  working for others. Try to use Helvetica or Times Roman or Courier.

• IR remote stops working after that the system will switch to standby

  IR remote no longer works after that the computer goes to sleep.  I use Windows Media Center (Vista) to the TV and use the remote a lot.  The ONLY way to make it work is to restart the machine, which is a PITA.

  In the device, here is what is displayed Manager...

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  I tried uninstalling, reinstalling the driver, unpluging the receiver IR USB, displacement of ports, etc., the software MS difficulty he tried, but nothing works.  It allows to work all the time, but these last few months, you must restart the computer to operate the remote control.

  Any ideas?  Help, please.

  BTW, it is a HP Desktop Media machine, and the remote control is the standard HP remote given out with their machines.

  Here is the official Microsoft fix for error code 38:

  Code 38: Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory
  http://TechNet.Microsoft.com/en-us/library/cc772090%28WS.10%29.aspx

  Have you tried to deactivate "standby" and checked for the repetition of the problem with the IR remote?

  You can ask your question to the Media Center experts at the green button forum:

  http://thegreenbutton.com/

  Have a Word with the help of HP to see if they have a fix for the same.

• APEX 5. Dynamic action on the CHANGE event does not work after applying the filter on IR.

  APEX 5.

  Dynamic action for the CHANGE event does not work after applying the filter on IR.

  Event: Change, selection Type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry

  Real action

  Selection type: jQuery Selector, jQuery Selector: td [header = 'abc'] entry, Action: run the Javascript Code

  Is TI WHEREAS behavior?

  I know, I can work around this problem by using the Refresh event and javascript, but I prefer DA and if possible Change event.

  Concerning

  mdyla

  mdyla wrote:

  It is, how to force them reallocate dynamic Action in the event of CHANGE of the input elements after refresh of IR region.

  Set the dynamic scope of the event action to Dynamics.