Contact NAME changes are not kept on 4.5 and 4.6, I see a bug?

Similar Questions

• When I edit all the contacts, my changes are not saved. Why?

  Any change to my contact list (when I update e-mail or postal address changes / phone numbers addresses etc.) editing seems to have worked, but as soon as I get out my address book, change has not registered. Any ideas?

  https://support.Mozilla.org/en-us/questions/996474#answer-561758

• I like the develop module, but I'm doing something wrong in the library in library, under 'Catalogue, all the photos', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard d

  I love the develop module, but I'm doing something wrong in the library

  In the library, under 'Catalogue, all the photographs', all my photos appear showing the stars, cropping, and development. The problem is that these changes are not for the photos on my hard drive. When I re-import them in Lr, the changes are not there. My workflow is to do nothing after development or export them to the original with a new file name destination. Anyway, it is that they get a new file name without change of development when they are imported into Lr.  Please help (PC user)

  And others have explained, Lightroom does not apply the changes to the file. All changes are stored in the catalog, and then applied to the image when it is displayed in Lightroom. If you want a copy of the image with any changes so that you can share with others or send it to a laboratory to print, then you must export a copy of this image by using the export dialog box in Lightroom.

  Features of Lightroom as well by its design. The images that you import are always left in their original condition, unmodified.

• When I edit a .wav file (noise reduction to remove the background hiss) and save them, the changes are not saved.

  I just installed hearing and have edited a few audio voiceover to remove the background hiss.  When I save the changes and reopen the file, the hiss is back.  The changes are not saved.  Why is this happening?  How to record the sound of the effects of reduction in my .wav file?

  [Ask in the correct forum allows... Left generic Cloud/Setup forum for forum specific program... MOD]

  shionak wrote:

  I capture the background hissing noise footprint > click apply > click on select, then click on apply again.

  These steps are not quite correct. You have two choices; either highlight a part of the background noise and use SHIFT + P, which captures your selection as a basis for NR or, open the Panel NR and use "Capture noise Print" from there, after making a selection first. After doing this, click on "select an entire file. What you definitely have to do is to use 'apply' at this point, and when use you it, just use it once.

  When you capture using printed, the Preview 'play' button inside the plugin to check the settings and then stop it. When you are satisfied of what he done, then click on 'Apply' - but once. This will apply for all of your noise reduction. As long as you do not use "undo" at any time, the version Number will be be recorded on the original, or if you use "save under", then the original will be left alone, and a new noise-reduced version will be saved.

• When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  When I close CS6 setting changes are not saved.  Restores the default settings on reopen.  Why?

  Sorry Photoshop - problems resolved - I read the details - turns out you need to make changes not files opened for preferences apply to all files.

  Thank you, Al

• With Adobe Muse when I make a change, I have a second user Admin how do ensure us that these changes are not overridden

  With Adobe Muse when I make a change, I have a second user Admin how do ensure us that these changes are not overridden

  If you're both using Muse, then it is no different that is both using PS, you HAVE, Word, etc. You must use a mechanism that allows all both have access to the most recent version of the .muse file (i.e. the creative Cloud Files, Dropbox, file server location folder, etc.).

  Changes made in the browser will be able to be synced to the .muse file. Changes in Muse are saved in the .muse file and if you go to work on the site of Muse on two different machines then you must have the updated on the other machine .muse file.

• Additional licenses purchased in 2004, but they are not loaded on the server, and they can't find the hard copy of the licenses to load them in.

  Asked me to take over the COMPUTER Department of a small Christian school. They are running SBS 2003. They bought licences for additional client access in 2004, but they are not loaded to the server and they can't find the hard copy of the licenses to load them in. Also, they purhcased of XP Pro and Office 2003 licenses (I have the disks and keys to install but do not know how many licenses they own) and they are not either of the paper copy of these licenses. Is there a way to contact Microsoft to get the licenses? Any help would be appreciated.

  Bill

  original title: recover lost Volume Licensing

  I just figured this out...

  I called the 1-866-230-0560 Option 3 Volume licenses and talked to someone who searched under the name of the school in order to locate licenses. It is even searched under our zip code and found other licenses that have been purchased by the school where the dealer abbreviated the name of the school.

  I hope that this is useful information to others in the same situation.

  Bill

• You are not running on a supported operating system. Please see Microsoft Virtual PC help for a list of supported host operating systems.

  You are not running on a supported operating system. Please see Microsoft Virtual PC help for a list of supported host operating systems.

  Crystall ball says you are trying to install a version of Virtual PC on some versions of windows and your PC apparently does not meet the system requirements
  http://www.Microsoft.com/Windows/Virtual-PC/support/Virtual-PC-2007.aspx

• Windows 8 app names (Plaid) are not in my language

  Hello

  I had this problem where all my built-in apps (weather, news, people, etc.) were in English. Following the advice that I found here, I changed my primary language in French and it worked partially: the contents of built-in apps are now in French, however, their names are still in English. The result is that my splash screen displays a tile "Weather" instead of the expected "weather", and search for the same application is not the weather app if I search for "Weather" The Windows store, however, shows the French names for my installed applications.
  How can I get app names as in my language on the screen and start looking for the app?
  Thank you.

  Hi MrTrillian,

  Thanks for posting in Microsoft Community!

  From your problem description, I understand that you are unable to display the name of Windows 8 applications in the language of your choice. I understand the inconvenience caused to you.

  1. Have you made further changes to the computer before another change that the main language to French?
  2. Have you changed the keyboard settings, and language of French?

  I suggest you to uninstall and reinstall an application and see if the problem still occurs.

  Step 1: Follow the steps to uninstall the application.

  a. right click on the application you want to uninstall.

  b. click on uninstall in the taskbar.

  c. press the button uninstall.

  Note: after you uninstall apps e-mail will get all these applications automatically uninstall Mail, calendar, e-mail, and people once you install any application in a single email, calendar, people, and mail all four will automatically install.

  Step 2: Follow these steps to reinstall App

  a. click on Store page of the User Interface of Windows 8.

  b. Locate the application you are looking for and click on the app and install it.

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• the names of my contacts will not appear in Imessage on my mac? It is only numbers. Some contact names appear but not much

  in my imessage that I can type peoples contact names and they will come to the top, but then it changes automatically to their number. contacts will be displayed, but not much.

  Hello

  Check the iPhone and Mac use the same service then synchronize Contacts.

  On Mac, including limiting to one account/service.

  There may be problems if the Mac uses iCloud, Google and Yahoo and others all at the same time.

  Most likely this isn't because of two devices sync contact lists.

  

  21:05 Monday; March 28, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   a few iPhones and an iPad

• The file names changed in wingdings, including the file extension and I can't delete, change them, open, etc. Here are the pictures.

  Have (had) a file with multiple files it contains with pictures in each file.  A week ago the pictures were there.  Now, the names are replaced by wingdings as names and file extensions.  When I try to open it, it is not accessible and that the file name, directory name or volume label syntax is incorrect.  When I try to delete it, it says that the file name you specified is invalid or too long and specify a different name.  When I try to rename it, it tells me that if I change the file name extension, the file may become unusable.  If I try to change anyway, it says I've specified file name is not valid or too long.  Only tried for the name 1.  I did a restore in the case where a program interfered with that.  However, nothing has changed.  All of the suggestions.

  You can download and try to delete the file Unlocker http://www.softpedia.com/get/System/System-Miscellaneous/Unlocker.shtmlwilh.  Although it is not designed for this particular circumstance, it may very well work in all cases, as it has been very successful in a wide variety of situations are not specifically highlighted in the directions (where do not work the normal Vista options).  NOTE: Some antivirus flag programs this program as a malware, but it is a 'false positive' and is safe to use perferctly.  My own software to flag, but several other well-known software products it clean and the warning is included in the documentation of the program.

  I wish there was a way to save the images, but at this point, it seems that the only option is to delete because you can't rename files EHF (if this option is available-I hope that work above).  Unfortunately, System Restore does not affect the files of data, so even if a program caused this, System Restore can eliminate the cause, but it would not restore the files to their previous names.

  If you have Vista Business, Vista Ultimate or Vista Enterprise, you can be lucky because they retain the files called snapshots http://windows.microsoft.com/en-AU/windows-vista/Previous-versions-of-files-frequently-asked-questions.  It can be used to recover previous versions of files that have been changed or deleted accidentally.  Here's how: http://www.microsoft.com/windows/windows-vista/features/shadow-copy.aspx.

  If you have Vista Basic or Premium of Vista, you don't have a shadow, but there is a free program for you that does essentially the same thing called Shadow Explorer: http://www.shadowexplorer.com/.  I suggest that you download and implement as soon as POSSIBLE to protect you if you accidentally delete or modify a file.  It will not help you in this instance, but it can help save the next time.

  I'm more concerned about why this has happened in the first place and prevent it from happening again.  I saw file names change before, but never of wingdings which then do not let you open, edit, delete, or rename.  We will check some of your system files: go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.  If you find any these corrupted files, try to post them here.  Maybe we can replace the good files on the disc.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If this does not work, then please post repetitive errors in Event Viewer about the name change (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work, you will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or that you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work - but it will probably not fix your renamed files.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version on system with SP1 or SP2 preinstalled cane and the disc is an earlier version, then you will need to do a slipstream drive as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• Firefox changes are not saved and need to change again every time that firefox is restarted.

  As I installed firefox on my new PC, nothing seems more register. Whenever I start it up, he wants to give me a ride as the first time I installed it. Background on the same pages size changes every time that I open them. Does not record the change on the home page, that is after I have change the options he will remember it not next time I start the program.
  In addition, even if his watch that I signed it for synchronization, it in fact does not synchronize anything from my old PC.

  Hi anorthodoxos,
  Thank you for your question, I understand that the options are not being saved when you restart Firefox. How to fix preferences that will not save

  Two other insights:

  1. You are browsing in incognito permanent?
  2. You have more than one profile? Use the Profile Manager to create and delete profiles Firefox

  This aid?

• The choice of search bar are not kept

  The search engine bar offers and collects the search engines apparently at will, and personal choice settings are not retained. Until recently he always had my engine of Yahoo as my first, but it has now been taken over by Ask. Even if I remove it, he returns and takes over. Mozilla has some sort of arrangement to allow for this behavior? Sorry, but it seems certain that someone has made a deal to have dominance this forced on people. Why not the choices we make stick? It's incredibly annoying. If you have some sort of backdoor fix involving the digging by code of re - write, please don't bother. I appreciate the creativity but I'd rather have this work as it should in the first instance. And if you sell advertising forced, clean.

  Hello, Steve.

  It is possible that you have a problem with some Add on Firefox which is an obstacle to the normal behavior of your Firefox. Have you tried to disable all add-ons (just to see) to see if Firefox goes back to normal?

  Whenever you have a problem with Firefox, whatever it is, you must make sure that it is not caused by one (or more) of your installed modules, whether an extension, a theme or a plugin. To do this easily and cleanly, start Firefox in safe mode (remember to select disable all add-ons when you start safe mode). If the problem goes away, you know that it's an add-on. Disable them all in normal mode and allow them one by one until you find the source of the problem. See this article for more information on troubleshooting extensions and themes and this one for plugins.

  If you need help with one of your modules, you will need to contact the author.

  If the problem does not disappear when all add-ons are disabled, tell me please, then we can work from there.

• The changes are not saved - RV110W

  Greetings,

  I use RV110W with Firmware Version 1.2.7.1

  Under Firewall > basic settings >

  Block WAN request:

  Enable

  then try to change the selection, then > save changes (at the bottom of the page) are not saved.

  I also verify that different browsers (IE, Firefox, Chrome...), but without success

  any ideas?

  TNX

  Hello

  Thank you for your kind reply. Based on your post above, I can life your 1.1.0.9 for 1.2.1.7 update firmware.

  Please try to take backup of router and try to downgrade the firmware to 1.1.0.9 and check the status of configuration in this version. If it works fine please try to update the firmware version of the 1.1.0.9 > 1.2.0.10 > 1.2.1.4 > 1.2.1.7 and verify the configuration changed and made me know the status to go further.

  Thank you

  Ambareezh

• Recent files Photoshop CC will not be updated and the workspace changes are not saved

  Hello

  My recent files have not been updated since I upgrade my Photoshop version lates (2015.1). My work space also seems to be reset every time I open Photoshop. For example, the pen tool s always changed back to brush, wand to the Quick Selection tool, etc.. Is it possible to change this to Photoshop settings?

  Best,

  Janne

  Hi mcjannet,.

  We can reproduce the same question at the end as well and our team of engineers working on the same.

  However, if you are not able to see the recent file to the recent folder tab, you can try to reset the Photoshop preferences.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Kind regards

  ~ Mohit