contact PEAK

Hello, you all...

Congratulations for this forum

I am from Greece and I don t write very good English... So, I want you to know.

My problem is that I want to represent volts and current of a box of electrologic

I do this measure with sensors and record data on a PIC Microcontroller

I want to transfer data to Labview through the RS232 serial port.

can someone show me how to represent this signals simultaneously in two different patterns?

I havemade an effort to represent this Signals but the only thing I manage to do was to represent one of them...

Thanks for the response.actually I made a simple vi for example Basic Series read and write.

I add a decimal ascii converter because peak connect labview by the strings and not with numbers

also, I add a simple plot just to see how it represents the bytes of the pic to labview.

It seems to work, but my problem is how can I save data to labview (from peak)

I want to send a value and store (Volt) and then another value (Ampere) and

This updated values every time I want in two different charts.

Tags: NI Hardware

Similar Questions

  • Defective GarageBand after update to iOS 9.2 on iPad3

    Since I have updated to iOS 9.2 on my iPad 3 I was not able to read or save on GarageBand.  When I try to save a climax using my microphone, I hear a cracking sound.  I contacted peak about a week ago and have no solutions of their own.  Today, I thought I would try again.  When I started GarageBand I got a message saying "Core Audio is not available" when I try to play a GB project nothing happens.  The cursor of the track passes directly and I hear nothing. Here are the songs that I recorded before the 9.2 update.  Apple has a fix for this yet?

    Bob

    Peak confirmed that an apogee does not work with Ios9.2 and they will advise registered users when they created a fix. Current position is only stable up to ios9.1

  • Apple Watch - contacts photos disappeared after 2.2.1 update

    I've updated my watch last week and have not had any problems until today only.  I noticed that my contacts pictures are gone and everything that is there now are the initials of contact.

    I checked my contacts and photos are still there on my phone.  Also, in the app shows that they are still there - but not on the watch.

    I rebooted twice, but that did nothing.  Also, when I receive a message from a contact who is now without a peak, it isn't even recognized as a contact because it only shows the number, they are texting, not their name.

    Not very happy!

    Hello

    The following steps may help:

    -On your iPhone, in the application of the watch, go: Watch My (tab) > general > reset > tap reset sync data.

    -Nothing seems to happen when you type, but the process will run in the background (invisible to you), allow a minute or two later.

    Therefore, it can also help to restart your iPhone and your watch later:

    -Turn the two devices off first, and then restart your iPhone before restarting your watch:

    -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

    -To switch on: press and hold the side button until you see the Apple logo.

  • Contact photos not appearing is not in the list of text messages

    Recently, I deleted all my contacts on my droid x in order to refresh my facebook contact photos (I do this since we all know the phone doesn't seem to update the photos themselves, as it should).  After importing my contacts back on my phone and set up my facebook account, once again, I've linked contacts that does not automatically link and now everything seems good.

    Here's where I noticed the problem.  Now pictures of my contacts are not at all in my application of message text (SMS GO).  I checked the application of the default text and they appear in there, but not in GO SMS. So I tried to uninstall GO SMS, wiping the cache on the phone and reinstalling GO SMS, but the images still do not appear.  It just shows the default avatar next to the name.

    Someone at - it suggestions that I could try to get the images to load into GO SMS?

    It's a very good theory.  To test this, you could install an application called SyncMyPix that queries your Facebook account to take photos and make them peak of gmail.  If your text app, then updates that your theory is right.  I hope this helps.

  • How to get the Pic of the address book Contact gave a phone number

    Hello

    How can I access the Blackberry address book and retrieve Contact's photo?

    I tried:

    String phoneNumber = "1234567890";
    Vector contactList = new Vector();
    contactList = Phone.getContactsByPhoneNumber(phoneNumber);
    

    except with a real number, of course. However, if I keep this code, I get an error saying ClassNotDefFoundError or something like that. on the line of Phone.getContactsByPhoneNumber () .

    Is there another way I can get the pic contact associated with a single address book contact?

    Later, I'll probably use this code to get the photo of contact:

    Contact contact = (Contact) contactList.elementAt(0);
    byte[] byteStream = contact.getBinary(Contact.PHOTO, Contact.ATTR_NONE);
    EncodedImage contactPic = EncodedImage.createEncodedImage(byteStream, 0, byteStream.length);
    

    So as you can see, I just need to get in contact for a specific contact record.

    Thanks for any help.

    If anyone is interested, he will get the peak of contact contact, based on the phone number. It assumes there is only one contact for this number, so if there is more than one, it will get the peak of contact for the last contact only, because the loop will overwrite the previous photos.

    BlackBerryContactList contactList = (BlackBerryContactList) PIM.getInstance().openPIMList(PIM.CONTACT_LIST, PIM.READ_WRITE);
    
    // Get a list of contacts that match the phone number (I only want last 8 digits only)
    Enumeration _enum = contactList.items(inputNumber.substring(inputNumber.length()-8),BlackBerryContact.TEL);
    
    while(_enum.hasMoreElements())
    {
        BlackBerryContact c = (BlackBerryContact)_enum.nextElement();
        if (c.countValues(BlackBerryContact.PHOTO) > 0)
        {
            byte[] photoEncoded = c.getBinary(BlackBerryContact.PHOTO, 0);
            byte[] photoDecoded = Base64InputStream.decode(photoEncoded, 0, photoEncoded.length);
            EncodedImage contactPic = EncodedImage.createEncodedImage(photoDecoded,0,photoDecoded.length);
            String picType = String.valueOf( contactPic.getImageType() );
            // If you want to store the photo as a HEX String
            String hexPic = byteArrayToHexString(photoDecoded)
        }
    }
    

    FACT!

  • Corporate blackBerry Smartphones calendar / contact / help by email

    Hello - my first post to a bulletin board ever! I love my BB, but being not not particularly experts peak, I was slow going. I have a few questions, I was hoping that someone could help me with that.

    1. I set up my personal e-mail address and have the excellent work. Today I created my work e-mail via the company's server address. My question is can I get these emails to enter a specific e-mail folder and not the folder Tote message (which make me crazy and are difficult to read) work?

    2. I thought that once I set up the business system would be automatically download my work calendar and contacts (Microsoft office) on my phone. Is it not the case? Is there something that I am missing? Can I download software bb to my work computer as well and synchronize?

    3. is there a way to get my e-mails sent to go in an e-mail folder sent to respective email accounts? Or is there a way to format the appearance differently?

    Thanks to anyone who can help!

    The BES account email must be 'almost' instant.

    BIS emails count on 'most' of the POP servers can be on the cycle of normal pressure 15 minutes... If mail ends up in two minutes, etc., until the mail is not again and returned to the cycle of 15 min until the mail is once again, rinse and repeat.

  • e-mail in a contact page form

    Can anyone recommend a quick tutorial on how to create a suggestion by e-mail on a contact page? I know that I need some sort of php script, but I have no idea of how to write a. I need to know how to make the information presented in the form sent to an e-mail address of my choice.

    Thank you

    Nick

    Take a peak (sic) here:

    paulgdesigns.com/learncontactform.php

    Gary

    Electronic search injection attack. Without sanitation injection your example script is an open invitation to host spam. Just a single line of code to clean up your email script. Why not include sanitation in your example?

  • Uninstall software update Apple says error in seller contact package package unstaller

    Try to get itunes working to make a backup of my faulty iphone before repair.

    First-itunes does not start says error. I'm trying to fix it, who said success but same error when you try to start it.

    Then uninstall completely worked. Then reinstall that seemed to be over except for a message "an older version of Apple software update already exists" then he went down and install itunes apparently had not been completed.

    Then I try to remove the update from the apple software and executed by an error in the installation program - it says there is an error in the installation and contact the supplier of the installation package. Same error if I run the uninstall command line program.

    Try to repair the Apple Software Update of programs & features Control Panel and then try to update iTunes again.

    For general advice, see troubleshooting problems with iTunes for Windows updates.

    The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

    Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

    The more information box has direct links with the current and recent if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit - for older video cards) as a workaround for problems with installation or operation, or compatibility with third-party software.

    Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

    TT2

  • Since the update for Sierra, contacts do not appear in Messages - just phone numbers.

    Since the update for Sierra, Messages no longer displays Contact names - only phone numbers.  No instructions on how to remedy this.  Ideas?

    Hello

    Go into the Contacts application and ensure that it uses the same account synchronization like the iPhone and other devices you may be using.

    Also check the part of the accounts of the Contacts application preferences and make sure that it's only using one account.

    21:34 on Friday. 7 October 2016

     iMac 2.5 Ghz i5 2011 (El Capitan)
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro (Snow Leopard 10.6.8) 2 GB
     Mac OS X (10.6.8).
     iPhone and iPad (2)

  • Change the name of the contact in mail

    In Contacts, I use (of course) an entry for families or couples, who share a single address.

    But if I send an email to one of them, the recipient sees the name of the family or the couple's two names.

    Is it possible to define a different name for each e-mail address?

    Thank you in advance for you help!

    The best way to do it is to have separated for each individual contact.

  • Empty the Dock and bring back the Contacts!

    After using my Apple Watch for a year now, I am appalled by the latest changes in operating system.

    The dock is tedious in comparison with the previous shot upward and along the method to access the information useful and shows a lack of understanding of the best type of movements required by the small screen. Information slide at the top are of little value compared to what has been replaced.

    The contacts button has lost its functionality as well. Contacts were essential. Where are they now?

    Even if it means a loss of face to admit the new OS *, asst last make it easy for the owners to return to the way the watch worked when they bought it.

    I live in hope (very little).

    You do not discuss Apple here. This is a user support forum at, and your comments on Apple should go here, http://www.apple.com/feedback and click on the box in this area. Read all the comments, they usually fail. He will tell you that when you propose, but things have changed because of the feedback.

    Contacts are found in the phone application, or your Messages application, depending on what you want to do. In addition, your Favorites from the phone are found in the phone app as well.

  • Contacts on my iPhone 6 will not sync with Outlook 2016

    I changed my computer and my Contacts Outlook 2016 will not be synchronized. My calendar and notes synchronization through iClloud and they are OK.

    I ticked the box "Remove Contacts using what is on my computer" 3 times and I'm showing still some contacts on my iPhone 6.

    How to get contacts on my iPhone? I don't want to use iCloud for contacts. He keeps double and triple contacts.  want to manually sync Contacts via iTunes.

    Thank you

    Hi ACEs of the crime pool.

    I see that you are having problems of synchronization of your contacts from your computer with Outlook 2016 to your iPhone. I want to provide a resource that should help you.

    Take a look at the site of the direction to take to this issue:

    If you are unable to synchronize your calendars and Outlook contacts on your iPhone, iPad or iPod touch via iTunes for Windows - Apple Support

    See you soon!

  • How do as notifications from contacts priority to ring and silencing all the others?

    I just bought a new 128 GB iPhone 6 seconds more and it's now the latest version of the iOS 10.0.2 software executing.  I've used other platforms (Android, BlackBerry) and I miss one features are the ability to have only sound important contacts through notifications, but all others are silenced.  It is very convenient when it is at work or out with friends that I get constant, a beep or vibration but am able to know immediately when, say, my child or my boss of messages me.  The boss and the child have iMessage, if this is relevant, but others are on different platforms, so I hope that I can set up in general.  E-mail applications that I use the most are iMessage, BBM, text, Facebook Messenger more telephone calls.

    You can use a do not disturb to reduce to silence the alerts. You can configure specific contacts so that alerts text for them always come. Go to the contact you want to implement. Press "Edit" at the top right. Type your text. At the top of the list is "Bypass of emergency." Turn it on. Tap done. Tap done again.

    You can also do the same for calls.

    Not disturb will silence the alerts to third-party messaging applications. I don't know of any way around that.

  • Contacts/Mac OS x Server Push Notifications and macOS strange behavior Sierra Server

    I have Sierra macOS Server 5.2 and the same "user01" account configured in Contacts.app on two computers of macOS Sierra 10.12 and a device unique 10.0.2 iOS (iPad). My expectation is that change on a device (for example to add a new contact) is in a few seconds on all other devices that are configured with the same account. However, this is not always true.

    Invocation of manual synchronization (quit Contacts.app, start it again) still works correctly. However the changes on a device (for example to add a new contact) are not pushed to all devices. Usually, the change is pushed and data are synchronized immediately only to the last device configured with the account. Other devices configured with the same account are not automatically updated.

    There are certificates valid push (push works on all devices, it's just seem to depend on which is configured earlier and who later).

    The same applies to the Calendar.app calendar events using the Protocol CalDAV, push calendar notifications and server for macOS.

    In the newspaper of apsd, on Mac OS processes, can even be considered that push message arrived at the apsd process, he was in the process of Contacts. The difference is, however, that AddressBookSourceSync process is not upload all the changes from the calendar server and macOS Contacts. Sometimes, the push message does not seem to happen Server NPP (based on the apsctl for the apsd log tool).

    The problem has been caused with a single device by push-topic Subscribe APNS.

  • Are automatically shared Contacts with the members of the family of a device for all devices of the family? One device uses IOS9 and others are using IOS10.

    Members of the family can share Contacts?  A member of the family is on IOS9 and others are on IOS10. Our calendars are sharing but not our contacts?

    No, sharing of family does not share Contacts. He shares:

    Purchases

    (If you are registered) Apple's music

    Family Photo album

    Family calendar

    Location sharing

    Find my iPhone

    Apple - iCloud - family sharing

    See you soon,.

    GB

Maybe you are looking for

  • Why is glitching safari on my iPhone 6

    Ive had my 6plus iPhone for over a year now and I've never had this problem. Am currently on iOS 9.2.1 It started today when I something on my safari search bar enter the app force closes, I tried to restart the phone, but this did not help, what can

  • Need drivers for the NETWORK CONTROLLER and PCI DEVICE

    Hi friends, I use a laptop PC portable Hp 630. In fact, my portable hard drive was dead, so I bought a new. and I tried to install windows 7 ultimate 32 bit operating system. It's over, but the problem is that my WIFI is not working. When I go to Dev

  • hotmail username is blocked

    I have used the 4 ways below to have my blocked username (* address email is removed from the privacy *) reset it using my office staff and a portable working environment. (1) password reset, (2) the PIN provided via a cell phn, reset (3) reset the P

  • Missing MP3 files

    When I copied the music and audio books from my hard drive on my rocket I have used Explorer and it worked well, until it changes from a removable media in an internal memory. Now, I can not find some music files when I use Explorer (for example I ca

  • Error 643 and 8004FF01 when installing updates

    original title: problems with Windows Update Windows Vista Business Gets the error message 643 and 8004FF01 when you try to install the updates. In addition, there is an error of Windows Installer produced as well.