Contained in the factory of recovery failure

Similar Questions

• An error occurred during the creation of the factory data recovery - how can I know what is the error?

  I have a new Dell Inspiron 15 5000 series laptop.  Trying to create a backup on an external hard drive plant.  I tried to attach the USB at various times in the process and several USB ports, but always end upward with the same error message ' year error occurred while creating the factory recovery data.

  I tried to "update", but when I select UPDATE, the only option is to UPGRADE to premium, I can't find a way to UPDATE.

  This is the end of the story: I had two sessions of phone with Dell Technical Support, and their solution was to send me a flash drive with backup and restore files.  The next day, I got a Dell alert that a new backup and restore (version 1.9) download is available for Dell computers, which were updated to 10 Windows (what I did as soon as I got my new laptop).  I had the chance to download the file and run it today, and it works.

  Thanks for your suggestion.  It seems that my problem occurred just in front of the Dell solution.

• Restoration of the factory without recovery disks

  Hello

  I bought a new laptop Sony Vaio VGN-AR870 in June 2008 and I enjoyed it a bit. It seems to me have succeeded to it bogged down and it works more slowly and more slowly and for a long time and I have remember how it is used to run when I bought it first of all I would like to restore it to factory settings and to give it another go, so to speak. I don't have recovery discs and I did everything when I got the laptop. How best should I go to this topic? My system restores are all set points in recent months, it is a step to go. Could I use a friends vista windows recovery disc and just manually install the drivers from the Vaio esupport site?

  Thanks for reading,

  Jordan

  I had an old set of model V from Sony. Backstage staff showed me by pressing F10 continuously when you start will bring you to an option of restore factore. But keep in mind that he wiped out all of your memory.

  I used to do once every two months and it has worked like a charm.

• The factory failed recovery

  I have a WANT ULTRABOOK-1204sa.

  Caught a virus and can not remove it (used SpyHunter and Malwarebytes).

  Decided to recover factory using the key USB Microsoft provided by HP last year when the hard disk went berserk.

  Went through the steps, but every time he tries to install, it fails.

  It formats the drive and transfer programs and begins to 'create '. Then reports

  The recovery attempt failed

  Press the Details button, you get

  CTOERROR. FLG

  [20:36:25.08] ChkErrBB.CMD: detect an error in the PININST_BBV.
  [20:36:25.08] ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log
  [20:36:25.08] ChkErrBB.CMD: or, visit c:\system.sav\logs\BurnBootMerge.log

  Press the button written SaveLog

  HP_SSRD_LOG. BOOTH to USB

  The laptop seems to be stuck in a loop trying to boot from USB

  Any function butoons that I use everything I get is ext to bootm left of the screen confirming the key, but not access.

  I have a brick. Whereas the breakdown of spare parts. But I'd rather get it back. Can put W7 place! I have a copy of W7 and W8 and last but not least XP!

  Someone at - it suggestions regarding ho I can get into that kind of thing UEFI and make it work for me?

  Not adverse to the dismantling to remove the CMOS battery (when it exists) or pinning on the bios.

  Used to be responsible for systems before the modern stuff came!

  Simon

  alias pappanoodles - the Daddy with noodles up there!

  SOLVED!

  Radical solution, installed Ubuntu 14. Hells bells his flies on this laptop. Boots in a Flash, using all my old progs except Office (free office of learning). Will try later, a dual-boot option. For the moment pleased as punch! HP should take note and may offer an alternative to Windows? Oh, and it makes bluetooth easy and love my Android smart phone and kiss my Windows phone too!

  To the review Ms.

  I have now a Sleekbook want to HP perfectly usable address!

  Windows and UFEI screwed up my laptop. Removed the hard drive, reformatted and access the BIOS. Legacy support active and installed Ubuntu LTS of 14. Less than an hour to install. Machine at the start of the exploitable (including typing in password) within 60 seconds, stops in 30 seconds. Perfecto!

  Simon - happy owner of envy and convert!

• Laptop will not reinstall windows after the factory system recovery

  So I have a laptop HP which is relatively new. I recently acquired the Virus 2010 Vista AntiVirus Pro. When the malware and spyware could not fix the problem, I decided to do a system restore, which would put the computer to the way it was when I bought it. I backed up the files and do the system recovery. He filled the recovery then said it will re-start to reinstall windows and complete the process.

  After the restart as it gets and error that says: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "ok" to restart the computer, and then restart the installation. »

  The only option is to click on 'ok', but after clicking it he is trying to reboot once again and the same error comes back. We tried to manually close the laptop and restart, but we always get the same error. I can get the start menu when the information system and the recovery is but to the past is just the mistake. Any suggestions on how to fix it? I don't know what else to do.

  http://welcome.HP.com/country/us/en/contact_us.html

  Problem with the HP recovery process, contact HP at the link above.

  This isn't their recovery process, Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Should I have the original keyboard for the factory system recovery settings

  HP Omini 220-1180qd desktop

  Win 7 64 bit

  My all-in-one PC has sent repair HP because the new second hard drive has failed. When he returns, should I the original keyboard to launch upward with the new system?

  I have a wireless Logitech MK300 who is older and I am away from home where the original HP keyboard. I appreciate your help and won't cause a problem with the new configuration.

  I suggest using the regardless of the type of initial connection

  PS2 or usb

  but should strive to put in place that long, the device can detect your keyboard

• receive a 0x4001100200000100a when using the factory DVD recovery

  I tested both of the hard drives and memory, and they all spent it is a Pavilion DV9740 us laptop any help would be greatly appreciated

  solved the problem, that the computer has 2 separate 160 GB hdd and primary one must have been fried because I opened the back and it was dinner warm to the touch, so I installed the secondary hard drive and it's working now

  Thank you for all the information

  Chris

• I need to do a restore on my laptop but I upgraded from premium to ultimate on the line, the restoration will cost the factory how to re - install my upgrade printed only email to purchase

  I have a Sony Vaio VGN series laptop PC that is corrupted and requires a complete restoration of the factory. Recovery discs when it's upgrade in place, but I'm not sure that it will be part of the recovery. I have the original e-mail printed purchase for online upgrade, including the key I will be able to use it again on the same laptop, it was installed on?

  The first thing you need to do is to get your Windows 7 Ultimate Anytime Upgrade key:
   
  An e-mail containing your product key will be sent to the e-mail address associated with your Windows Live ID account or e-mail address you provided if you ignored the account configuration. Note: If you use an email tool or spam blocker spam filter, be sure that you can receive e-mail messages from microsoft.com.
   
  What happens if I lose my product key?
   
  If you lose your product key, you can return to

  www.Windows7.com/GetKey and sign in using the "Sign In" link in the upper right of the page. This will allow to recover your product key if you have established your account with your Windows Live ID. If you do not configure a Windows Live ID account initially there is no record of your online product key. Check your e-mail since it is the only trace of your product key.
   
   
   
  or

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)
   
  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features.
   
  --------------------
   
  The next thing you need to do is to ensure that your data is backed up:
   
  http://notebooks.com/2010/12/27/how-to-backup-to-an-external-hard-drive/
   http://notebooks.com/2011/02/25/how-to-restore-a-backup-from-an-external-hard-drive-in-Windows-7/
   
  -------------------
   
  The next thing you need to do is to reinstall the base license that you upgraded, Windows 7 Home Premium or Ultimate.
   
  If your computer is pre-installed with Windows 7:
   
  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.
   
   
   
  -Samsung uses ESC on most of its systems
   
  -HP use F9 on most of its systems
   
  -Fujitsu uses F12 on most of its systems
   
  -Acer use F12 on most of its systems, but often you need to go into BIOS to allow

  -Dell uses F12
   
   
   
  In general, look at the screen during the POST for a tip for what is possible.
   
   
   
  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.
   
   
   
  ------------------------
   
  If it was a store bought retail license:
   
  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows-7
   
   
   
  --------------------
   
  After you have reinstalled your original license, make sure that it is enabled before doing the upgrade to Windows 7 Professional:
   
  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
   http://support.Microsoft.com/kb/950929/en-us

  ----------------------
   
  Redo the Express Upgrade:
   
  Click Start, type Anytime Upgrade, click Enter a key, enter the Windows 7 Ultimatekey request, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Ultimate files the stored settings and programs.
   
   
   
  ---------------
   
  Go to reactivate the license again.

• Satellite A300 - is the recovery disk contains all the drivers?

  I bought a new Satellite A300 and now I have to reinstall Windows Vista. My question is:

  Through the recovery disk I already have all the necessary drivers for my computer?
  What I have to download them one by one in line?

  Thank you for your help

  Ciao

  Michele

  Hello

  Yes, the Toshiba Recovery disk contains all the drivers and tools for your laptop. After using the Toshiba Recovery disk, you have the same settings that you have started the laptop the first (out of the box). This means that the disc contains a picture of the factory settings.

  The disc is very easy to use: you only have to boot from it and follow the instructions on the screen. Windows, and all drivers will be reinstalled in a few minutes.

• Re: Satellite A300 cannot start, cannot use the factory recovery

  Hi all, I have a Satellite A300, which gave me problems in the past few weeks...

  I use Windows Vista

  There are about 2 months in the beginning of the laptop problem, it restarts itself automatically before enter in windows (while in the windows loading screen, no blue screen, screen just suddenly darkens and restarts itself), but it will get finally in windows successfully after a few loops

  but about 3 weeks ago, it just keeps looping and never get into windows, good news, it is that it can capture mode safe without problem

  I've done everything I can to try and save, as play with msconfig, drivers, removing the Rams etc, but not luck

  so, I save everything in safe mode and decided to restore the machine factory, but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!

  any idea? or y at - it another way to restore to factory without touching the windows installed in my laptop? is it a hardware problem or software?

  I thought about the creation of recovery disks but my cd drive is not working properly, and I don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...

  Thank you very much!

  >.. .i don't want to take the risk of buying an external cd drive not knowing not if the problem can be solved...
  That of right, but you must understand that it is not easy on this virtual path to offer an accurate explanation and diagnosis for your problem.

  It is not easy to tell whether it is hardware or software related issue. best way to test is installation of recovery image. Recovery image is tested and if there are no some portable hardware problem should work fine. How to install the recovery image, which you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm

  >.. .or is there another way to restore to factory without touching the windows installed in my laptop?
  Something like this is not possible. Windows that you use now needs to be reinstalled. I don't know why you the laptop restarts, but it's also the risk of recovery image installation. In case this recovery image installation will be interrupted, you will have two problems:
  -image of original recovery saved on your HARD drive will be unusable
  -you will not be able to start t

  In your situation the best is to minimize this risk and have original recovery DVD that can be used if something goes wrong.
  > but the problem is that when I boot up the computer by pressing 0 and enters the recovery screen, reboot loop will happen!
  Can you please explain what is exactly happening? Is - this laptop is simply cut off / go to the coast and then reboot again or what?

• Recovery of the factory from 32 bit to 64 bit with the note system performance

  Recovery of the factory from 32 bit to 64 bit with the note forever system performance, it's about associated wire
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=50433
  which is closed/locked, and had no correct answer.

  I just bought a Toshiba L750. After learning of the default Windows 7 installed is Windows 32 bit, I decided to go Recovery Wizard from Toshiba upgrade to 64 - bit. However, the process is stuck to the system performance of note, that repeated several times for 2 hours.

  Given that I guessed that screen performance of system just note one full screen of a normal process of Windows, so I pressed the button Windows start to display the taskbar which showed a component of Adobe installation process has failed. In any case, I clicked on the install Adobe on the taskbar button and close the window.

  The note system performance then continued with about 10 steps ahead after 15 minutes. All well done.

  So the trick is to close a window of the installation components that get stuck. Hope this helps some Toshiba laptop users out so hard.

  A suggestion from bits to the team of Toshiba laptop:
  The full screen of the Recovery Wizard is good to hide technical details from users. However, if hang in some components, like the Adobe component I've seen, this will be confusing and advises current defects if the end-user following some in the thread above, legacy because of some missing components and the wrong configuration. It is preferable that the wizard of recovery to exit full screen at a given time, or the wizard handles error scenarios better.

  > So the trick is to close a window of the installation components that get stuck. Hope this helps some Toshiba laptop users out so hard.

  Thanks for sharing this with us!

• How do I restore the factory settings without recovery disks

  I'm trying to restore my laptop to its factory settings but I don't have the cd to do it with.
  I have bin told I can do using bios by pressing f8 at the boot screen.

  I did it and taken to system restore settings, but I can't find any option to reset to the factory settings.
  The options I see won't let me restore to factory settings.

  Can anyone help?

  Hello

  When you start your notebook F8 repeatedly press. You enter the Advanced startup options. If you n t change anything on preinstalled HDD (delete the second partition, change the structure or installed other OS partitions), you will see option to fix my computer.

  When you start this option, you enter The System Recovery Options. Last option, there are Toshiba Recovery option.

  When you choose this procedure of recovery option should start and you should just follow the menu on the screen.
  All that s!

• How to set the Satellite A100-596 to factory without Recovery DVD settings

  I gave my young niece of my old laptop A100-596 for Christmas.
  It worked perfectly on Christmas Eve I packed it upward, in packing of origin, but at the time my niece connected on it has lost 40 GB of data among the drives C and E - everything E drive and the dvd drive had stopped working!

  Now, no one has any explanation for what is happening, nor any reason why a laptop that has performed flawlessly for 18 months would suddenly lose 3/4 of the data on it, but whatever!

  So now I want to restore it to factory, but without a job settings dvd, how? I have all disks involved in perfect condition!
  In addition, I want to fool proof so it can be retrieved in case the person or nothing damaged, this time he cannot repeat the action.

  So I think that if I partition the hard drive so that the recovery of files is accessible by me with a password, which I will NOT share with any of the children, if they bumble once again, then I will be able to recover.

  Moreover, even restoring the system files have disappeared, so I can't even it roll back to a working condition!

  Any advice?

  Hello

  You wrote so much and I think it's the best we descuss all questions slowly.

  I don't know what you mean under non-working DVDs. Is the drive defective optical drive or media DVD is not readable?

  Anyway, the fact is that if you want to have the factory again settings you must install operating system using Toshiba DVD recovery. If you don't have it you can do clean OS installation using the Microsoft DVD facilities. All the necessary drivers, tools and utilities are available on the Toshiba support under http://eu.computers.toshiba-europe.com page > support & downloads.

  When you use recovery media Toshiba HARD whole disc will be erased. Absolutely everything. All data and partitions.
  What you want to do with recovering data unfortunately will not work. You cannot copy the recovery image and start it from the other partitions. Not on Satellite A100.

  On new A300, something like this is possible because the recovery image is stored on the second partition in folder HDDRecovery.

  If you have any other questions please let us know.

• How can I restore my empowering technology from acer asire Home premium back to factory with a recovery disk? All the factory settings have been destroyed, and windows vista ultimate sp1 has been installed on my computer.

  I have an acer aspire 4720z / with windows vista home premium / with the enabling technology / processor intel pentium dual core. I think I downloaded a program limewire lennex, it was suppose to be something else. Somehow that he closed my computor, luckly my cuzin was able to download windows vista ultimate SP1 64 2007 multimedia content on my laptop so that I can at least use MY COMP. But I think I like the version that is installed on my comp.better to the ultimate version on my comp.now, it does not seem as before prefome. Some things on my computer laptop don't prop wk. What should I do, go back to my version Home premium of moose? If so how to do that? I don't have a home premium recovery disc. I tried to install the updates of windows SP2 64 thought repairs that would set back 2 the origonal but settings it na not or at least update the ultimate version do you think I should do.

  If you have downloaded Vista Ultimate and not bought, you use pirate software.

  You will receive NO Support for pirated software.

  If this does not work, contact Acer:

  http://www.acerpanam.com/Synapse/forms/portal20.cfm?RecordID=853&formid=3390&website=AcerPanAm.com&siteid=7117&words=all&keywords=&areaid=2

  Acer eRecovery made

   

  1. on the Acer splash screen, you can press Alt and F10 (at the same time press F2 to enter the BIOS) to make it appear a version BACK style eRecovery.

  ·        The unit is able to reload Windows from this mode faster then CD.

  ·        The default password is 000000 (6 zeros) and it is shown when you are prompted for the password.

  ·        Users are able to change the password in this mode for eRecovery only.

  ·        The system can retrieve the hidden on the hard disk (partition PQService) image or a CD/DVD media.

  ·        It is possible to reload the factory CD/DVD style or snapshots that creates the eRecovery Windows version.

  2. in Windows, there are 3 ways to access eRecovery functionality.

  ·        Press Alt and F10

  ·        Open Acer eManager and then double-click eRecovery.

  ·        When a system is new it should automatically open this application and invite you to do the recovery media.

  3. the Windows version of the eRecovery program is stronger then the Dos Version. Below you will find the various features of the Windows version:

  Recovery settings: create backup files and change password

  ·        Picture of the backup snapshot (create a disk image of your system configuration)

  1. the system is able to make a CD/DVD image of the current state of mobile software including customer programs installed.

  2. This CD/DVD is usable in Windows and DOS of the program version.

  3. the drive should start, but isn't always.

  4 when a snapshot is in fact the image is on the D: partition and then can be burned to disc if eRecovery is said to.

  ·        Burn the Image to disc (create a backup disk)

  1. you can create 3-7 CD or DVD 1-2 such as those that were sent with the units before eRecovery.

  2. the serious CD are equal in usage to the system recovery CD and CD

  ·        Remove data from backup image of capture instant user (if available)

  1. This is how delete you the snapshot on the D: partition images

  ·        Password: (change the eRecovery password)

  1. measures: restore your system using an existing backup file or restore the default configuration in your system factory.

  2 backup copy using one of the snapshots has been filed or the original image on the D: partition.

  4. made eRecovery

  ·        When the hard drive is replaced the system loses its characteristics eRecovery. These features are on the hard drive and cannot be reinstalled.

  ·        When reinstalling from the CD/DVD's you will lose the eRecovery program but the DOS version can still function, as if uninstalled, you can not reinstall.

  ·        eRecovery uses Ghost (as well as the use of our recovery CD) to create snapshot images.

  ·        If the PQService partition is removed using fdisk or a utility under Windows, you may need to reinstall Windows.

  ·        If the system is recharged using the DOS version you retain the eRecovery feature

  Mick Murphy - Microsoft partner

• Pavilion G7-1368dx: the factory recovery failed

  A few weeks ago, Windows Update downloaded 10 Windows on my laptop. I tried a few days and decided I didn't like it so I uninstalled and reinstalled Windows 7 on my laptop. I lost the hp Recovery Manager, and by some people on this forum, I ordered the hp dvd recovery. I received the DVD and saved all my personal information. Then following the hp instructions that I started on the DVD and the recovery driver and application of discs. Records downloaded and after installation it says "failed to retrieve from the factory. So I retried 3 times with the same results. I searched the site of hp and found my problem and he said that you must have the wireless switch, but I tried and there is now nothing when I hit the button wireless. I am in desperate need. How can I fix it?

  In fact, I realized that I was wrong to installation with the hp factory recovery disks. If your laptop has wifi the you must have the WiFi button before using the HP factory recovery disks, otherwise it will fail by the Service the customer of HP. Thanks for your help.