Similar Questions

• How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  How can I "RECORD each piece of data (and I mean everything!)" contained in the hard disk of the laptop? »

  I know PC never fade completely everything, so if there is a way to get personally, I'd really like the head upward on the how to do?  I would be better for me to download all this information on a PHDD, rather than handing the portable real in question so that its content of forensics experts, because current 'Communications Network serious security' we have been subjected to.

  Here you go:

  1. Use an imaging program to create a clone of your hard drive.
  2. Delete the original from your PC hard drive and keep it somewhere safe.
  3. Put the clone in the PC.

  It is the only way to really keep all while still able to use the PC.

• Developer Mode error: outdated., the xxAM.xxVO1 view object contained no trace. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  Hi all

  I'm creating a Maunal search page.

  To do this, I created a view based on a custom display object.

  Page contains 2 parameters.

  If I give all settings and click the OK button.

  It gives the following error.

  Developer Mode error: outdated data

  
  

  This page contains outdated information. This error could have been caused by the use of the buttons of the browser (the browser back button, for example). If the browser navigation buttons were not used, this error may result from coding errors in the application code. Please check press the back button on the browser developer guide - view primary key object comparison section to review the main cause of this error and correct the mistakes of coding.

  
  

  Cause:
  The view BLTrinDisplayAM.ViewVO1 object did not contain any record. The records displayed may have been deleted, or the current record of the view object is not properly initialized.

  To visit, please click on the Home link at the top of the application page to return to the main menu. Next, go to this page using the app's navigation controls (menu, links and so on) rather than use the controls of the browser as rear or front.

  If I don't give any parameter and click go Button.The content of the view are displayed.

  So if I pass all parameters and click Go, then the corresponding record is displayed.

  Why, for the first time, if I give the parameter and click Go, obsolete data error is coming?

  Please help me.

  Grateful for your help!

  -Aren

  You use the object of the view for the search criteria and search results fields.

  I suggest you to remove references of VO fields of search criteria, item1 and item2.

  And in the event of the button 'Go' in the processFormRequest, get the criteria for field values entered by the user as below and run the object (ViewVO1) of the view by using these values.

  String buCode = pageContext.getParameter ("item1");

  String lsiCode = pageContext.getParameter ("item2");

  Thank you

• How to filter the records that contains the Spanish character?

  Hello
  
  I had an obligation to always records based on the Spanish character.
  
  Kindly guide me for below.
  
  To filter the records that contains Spanish characters?
  
  For example, I had a value in the column name as 'Sureshn '.
  
  My query should return the above folder that contains the Spanish character "N".
  
  Please do the necessary help / advice on that.
  
  Thank you
  Orahar

  I don't know what you want, because if you want a? ¢ Analysys and Sureshn, then my previous query is sufficient. However, maybe something like that.

  SQL> ed
  Wrote file afiedt.buf
  
    1  WITH Sample_Data AS (SELECT 'â?¢ Analysys' str FROM DUAL UNION ALL
    2     SELECT 'SureshÑ' str FROM DUAL UNION ALL
    3     SELECT 'ABCD' str FROM DUAL UNION ALL
    4     SELECT 'WXYZ' str FROM DUAL UNION ALL
    5     SELECT 'Saubhik' str FROM DUAL
    6     )
    7     SELECT str AS "Contains other than English" from Sample_Data
    8*    WHERE REGEXP_LIKE(str,'[^[a-z,A-Z,0-9]]*')
  SQL> /
  
  Contains other
  --------------
  â?¢ Analysys
  SureshÑ
  
  SQL> ed
  Wrote file afiedt.buf
  
    1  WITH Sample_Data AS (SELECT 'â?¢ Analysys' str FROM DUAL UNION ALL
    2     SELECT 'SureshÑ' str FROM DUAL UNION ALL
    3     SELECT 'ABCD' str FROM DUAL UNION ALL
    4     SELECT 'WXYZ' str FROM DUAL UNION ALL
    5     SELECT 'Saubhik' str FROM DUAL
    6     )
    7     SELECT str AS "Contains English" from Sample_Data
    8*    WHERE NOT REGEXP_LIKE(str,'[^[a-z,A-Z,0-9]]*')
  SQL> /
  
  Contains Engli
  --------------
  ABCD
  WXYZ
  Saubhik
  

• the associative arrays containing the record type, cannot be used first

  I am having trouble with the declaration of an associative array containing the Types of records and iteration using FIRST and NEXT functions.
  This problem of mine is only appear when I use that types of records, the FIRST and FOLLOWING operators work very well when you use the regular NUMBER.
  
  Trying to get the first element of the array, I get: ORA-06550: line 22, column 40: PLS 00382: expression is of the wrong type
  
  See the code snippet below. Anyone know if this can be done in PL/SQL?
  
  -----------------------------------------------------------------------------------------
  DECLARE
  
  
  -Set the record structure that will contain information on a post
  TYPE PostRec IS (RECORD
  post_type VARCHAR2 (4) - maybe DEB/CRED
  );
  
  lr_charge_back_post PostRec;
  
  TYPE post_table IS TABLE OF PostRec NOT NULL
  INDEX BY VARCHAR2 (4);
  
  assoc_posts post_table;
  
  BEGIN
  
  
  -lr_charge_back_post.post_type: = "asd";
  assoc_posts('1').post_type: = '1';
  
  lr_charge_back_post: = assoc_posts.first;
  
  END;
  /

  Returns the index, not the file FIRST:

  SQL> declare
    2  TYPE PostRec IS RECORD (
    3  post_type VARCHAR2(4) -- Can be DEB/CRED
    4  );
    5
    6  lr_charge_back_post  varchar2(20);
    7  TYPE post_table IS TABLE OF PostRec NOT NULL
    8  INDEX BY VARCHAR2(4);
    9
   10
   11  assoc_posts post_table;
   12
   13  BEGIN
   14
   15
   16  --lr_charge_back_post.post_type := 'asd';
   17  assoc_posts('1').post_type := '1';
   18
   19  lr_charge_back_post := assoc_posts.first;
   20  dbms_output.put_line('idx='||lr_charge_back_post);
   21  END;
   22  /
  idx=1
  
  PL/SQL procedure successfully completed.
  
  SQL> declare
    2  TYPE PostRec IS RECORD (
    3  post_type VARCHAR2(4) -- Can be DEB/CRED
    4  );
    5
    6  lr_charge_back_post  varchar2(20);
    7  TYPE post_table IS TABLE OF PostRec NOT NULL
    8  INDEX BY VARCHAR2(4);
    9
   10
   11  assoc_posts post_table;
   12
   13  BEGIN
   14
   15
   16  --lr_charge_back_post.post_type := 'asd';
   17  assoc_posts('idx').post_type := '1';
   18  lr_charge_back_post := assoc_posts.first;
   19  dbms_output.put_line('idx='||lr_charge_back_post);
   20  END;
   21  /
  idx=idx
  
  PL/SQL procedure successfully completed.
  

  Max
  http://oracleitalia.WordPress.com

• I can't find a way to sort the records themselves in alphabetical order by name. I speak not in a display mode, but in how they appear when I click on the tab my favorites. Can someone explain to me how to do this.

  I have a lot of issues of brand book with websites contained in each folder. I'm able to sort sites within each folder alphabetically by name, but I can't find a way to sort the records themselves in alphabetical order by name. I speak not in a display mode, but in how they appear when I click on the tab my favorites. Can someone explain to me how to do other than manually by dragging because it is extremely difficult for me, due to the fact that I am with limited movement tetraplegic hand dexterity

  Folders of bookmarks you created are in the folder Menu bookmarks. "Sort" this folder.

  http://KB.mozillazine.org/Sorting_bookmarks_alphabetically

• CD RW drive does not have the recording tab

  I have problems with my being considered by Windows XP as a CD-ROM drive only CD burner. The recording tab is not available on my system properties. I exchanged the drive with the other 9 that I have here that work fine on my other machines with Windows 7 and Vista, byt XP refuses to see them as anything other than ROM discs

  I tried to go in the registry at the location following and ensuring that the drive type is set to "1".

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\CD Burning\Drives\Volume {fa124c43-d6c8-11de-8776-806d6172696f}

  NO CHANCE!

  I also passed to Component Services and enabling the IMAPI service in and outside, without success. Windows will simply not see the CD as anything other than a player.

  With the NERO Burn software, I am able to burn CDs and DVDs without problem, but I was hoping to quickly burn discs CD - RW using Windows without having to load to the top of NERO, as I used to be able to do before.

  My system is composed of:

  • XFX nForce 780i Mobo
  • Pentium D 3.73 GHz bumped 775 processor Presler
  • NVidia Geforce 9500 GT video
  • 4 GB OF RAM
  • Phoenix Bios Version P06

  If anyone has any ideas, I would be grateful, it seems that something in Windows does not see the drive correctly. Nine discs can't be all bad. I even out the hard drive and put in the condition with Vista in the machine and the CD player is considered to be a writer, so there is no hardware problem. He came down to somewhere in the XP operating system and I went through with my knowledge. There must be a service of components or a registry key to twist it and raise the windows of the hardware

  Ray

  Hey Ray,

  Seems that happened for quite a long time. The problem that you are facing may occur due to upper and lower filters apply on optical drive Firmware. Try following the steps below and we'll see if it works!

  Click on the Start button in your desktop computer, and then click Run.

  In the Open box, type the following text:
  Regedit.exe.

  Click the OK button.

  Click on the plus sign (+) next to HKEY_LOCAL_MACHINE.

  NOTE: When you click the plus (+) next to a folder, it will expand displaying the folders it contains in the left pane of the registry editor. When a file is highlighted, the contents will appear in the right pane of the registry editor.

  Click on the plus sign (+) next to SYSTEM.

  Click on the plus sign (+) next to CurrentControlSet.

  Click on the plus sign (+) next to control.

  Click on the plus sign (+) next to the class.

  Click {4D36E965-E325-11CE-BFC1-08002BE10318}.

  On the right side of the window, click UpperFilters.

  Click on edit in the menu bar.

  Click on remove and then click OK.

  On the right side of the window, click LowerFilters.

  Click on edit in the menu bar.

  Click on remove and then click the OK button.

  Click Register and then click on exit.

  Restart the computer normally.

  NOTE: once you have completed these steps, check for other CurrentControlSet records in the registry that can be titled CurrentControlSet001, CurrentControlSet002, CurrentControlSet003 and so on. If these files exist, you must follow this procedure for every folder CurrentControlSet delete upper and lower filters.

  Saurabh yapi | E-mail address is removed from the privacy *.

• How to operate the laboratory discovered multi-function synchronization with multiple devices and change the recording time?

  Hi, I'm new in Labview. I need help for:

  1 change a program multi-function in order to record the data of three cards daq (devices 1-3) and output through the map (1 unit). The current program was created to record and output signal of one of the card (1 unit). I try to choose multiple devices when I run the program, but there is an error 200558 shows "a task cannot contain multiple independent devices. Create a task for each independent device.

  2. change the duration record for a longer period, for example: 0.1 s. Currently, the recording time is s 0.009971.

  I joined the multi - funtion.lld. In this library, "des_v2_Multi-Funtion_Synch I - AO.vi" is the program that I need to change. I've also attached a file of input for runing the program signal.

  Thank you very much!

  Sincerely,

  Jie

  Hello Jshen6,

  You can have different examples of VI if you do not use the same version of LabVIEW. I am currently operating on LabVIEW 2013 SP1. Whatever it is, this article should be useful to you that he describes in detail how to synchronize multiple tasks of series M.

• I backed up the files on a DVD of a XP OS to put on a 7 OS but the record shows that the data on the DVD is corrupted

  I backed up the files on a DVD of a XP OS to put on a 7 BONE, but the record shows that the data on the DVD is corrupted. I have run some recovery on the DVD programs and even if she shows that 2.3 GB have been used they are unable to find the data

  * original title - I need fast help please *.

  How is not have you backed up the files?  You just burn it to a CD or did you use the 'NT backup' program of Windows XP?  I don't think that the Windows XP Backup program is compatible with the Windows 7 backup program.  The following link contains an article that explains this condition:

  "Windows 7 backup XP restore"

  If you simply copied the files on the CD/DVD, then it is possible the program that copied the DVD not to "finalize" the DVD.  If you can play the DVD on the computer that created it, but cannot on another computer, then this is probably the case.  If this is the case, then put the disk into the computer that created and put in place the program that burned and look under the 'Tools' menu for an option "Finalize"... and do it.

  HTH,
  JW

• lost all the images contained in the "my pictures" file on the hard disk while using Windows Live Photo Gallery

  I lost all the images contained in the "my pictures" file on the hard drive.  The files are there but when I open the files they are all empty. It's like some 50 folders and each folder contained about 25 or so images jpg. I lost the using the "windows live photo gallery» I found a thread that someone else has had this problem and only one answer was to check the checkbox 'Show hidden files'. I have done this no luck there. When I open "windows live photo gallery" all records are on the left of the window but empty. I did not send any of these files to the "trash".  Can someone tell me how to recover these?

  You ran the scanner of MS too? It will take some time, but it must be done. If a virus is responsible for it must be nuked before he can ravage any more.

  Send all the pictures? You can still recover these - and get some help course in order to avoid this sort of thing. External hard drives and online storage are worth a small spending to protect valuable files. I also keep the dvd - outdated image files but enough fix if even they can deteriorate over time (but don't we all!)

  Let us know if the scan MS lands anything - run the full scan - it will take time.

  Best - R

• retrieve the records from the oracle sql query

  Hello

  I'm stuck with a requirement where I need to retrieve some recordset based on the conditions. I won't be able to produce the same data and table here, but I can explain the problem with the example statement:

  If col2 contains 'y' to any folder, then select only the records. Where, as if no line contains the value 'y' for col2 then retrieve all records.

  Database version: Oracle Database 11g Express Edition Release 11.2.0.2.0 - 64 bit Production

  with temp (col1,col2)
  as
  (select level,decode(mod(level,2),0,'y',1,'n')
  from dual
  connect by level < 10)
  select * from temp;
  
  

  Please help, if possible through sql.

  Thank you

  Vikram

  Something like below... Considered as non-null column col2...

  with the temp (col1, col2)

  as

  (select level, decode (mod(level,2), 0, 'y', 1,' no))

  of the double

  connect by level<>

  Select * from temp

  WHERE col2 = NVL ((SELECT col2 FROM temp OÙ col2 = 'y' ET rownum = 1), col2);

• I have about 530 jpegs that were the records to progressive JPEG, and I need to save them all to standard baseline JPEG.  How to do all this without recording them one by one?

  I have about 530 jpegs that were the records to progressive JPEG, and I need to save them all to standard baseline JPEG.  How to do all this without recording them one by one?

  Hi Rachel

  Go file > Scripts > Image Processor which opens this Panel

  

  It will be easier if you put all the images in a folder, you can select this folder and all the files it contains batch. The numbered sections are in the order you need to follow, so nice an easy.  Don't forget to assign a location record well, or you might struggle to find their.

  An alternative, FI you re using Windows is Irfanview.   It has more options than the Image Processor, but maybe it's a little harder to use.

  http://www.IrfanView.com/

  Good luck

• How to upgrade all the record for a particular column in a table based on search criteria.

  Hi all

  I'm new to ADF. I have a requirement where I have to perform the update of mass on a table.

  Scenario:

  Ex: I have a search region manual dept. where I search with deptId: 20. I get 20 records in my table. now I have another area where I have an inputchoice list that contains all the column names that exist in the dept table. Beside that, I have a text box and a button update

  The user now, first research with dept id: 20 and click on the button Search, where it shows 20 record in the table. He then select an input choicelist(ex: ManagerId) column, then enter the new value in the decision-making box(ex: abc) then click on the button update.

  Now, I want to, all the records in the ManagerId column with dept id: 20 update with the new value 'abc '.

  Can someone help me with the code.

  Thanks in advance...

  Hello

  If you go to your VO and generate the ViewObjectImpl, here you can create a method that contains two parameters, 1 the name attribute and 2 the value.

  Then you can follow something as explained in this post:

  ADF tutorial: how to apply actions in bulk to a view object lines

  The only difference is that you must create a method like this:

  ' Public Sub updateAttribute (attribute String, Integer value) {}

  RowSetIterator iter = createRowSetIterator (null);

  While (iter.hasNext ()) {}

  Line = iter.next ();

  row.setAttribute (attribute, value);

  }

  }

  Then execute you who expose a customer interface and then after you filter your table according to your criteria just this method passing the correct parameters.

  Concerning

• Throw the records with null values columns

  Hi all.
  
  Anyone know how to dispose of records containing null column values?
  
  In the target table, I have the set Null option? with "N"... then the process sqlldr load some records. I need to load all of this without the records with null column values. by result, if the field X is null then load the file.
  
  Kind regards.
  
  Published by: ASzo on 05/06/2013 12:37
  
  Published by: ASzo on 05/06/2013 12:38
  
  Published by: ASzo on 05/06/2013 12:42

  load data
  INFILE...
  in the table...
  When x! = ''
  fields completed by...
  (x ...)

• Filtering the records of MDB

  I have a client who wants to filter records in the MDB... It should work as a point of view in DB or an array type select in the physical layer... choose * where Type = 6.
  
  Problem is that he can't or he wouldn't have the physical layer.
  
  The only way I can see for this to the MDB is when you map the logical physical column column, in the expression to a CaseIf Type = 6, map... I have to do this for each column... am I right?
  
  Pls. y at - it another way to do... easier?
  
  TXS for any help.
  Antonio

  Use where clause contained in the tab content of the logical table source properties.

  No need for any more.

  Mark correct/good so pls help